Download or read book Micromanufacturing of Metallic Materials written by Jingwei Zhao and published by MDPI. This book was released on 2021-01-13 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: Product miniaturization is a trend for facilitating product usage, enabling product functions to be implemented in microscale geometries, and aimed at reducing product weight, volume, cost and pollution. Driven by ongoing miniaturization in diverse areas, including medical devices, precision equipment, communication devices, micro-electromechanical systems and microsystems technology, the demands for micro metallic products have been tremendously increased. Such a trend requires the development of advanced technology for the micromanufacturing of metallic materials, with regard to producing high-quality micro metallic products that possess excellent dimensional tolerances, the required mechanical properties and improved surface quality. Micromanufacturing differs from conventional manufacturing technology in terms of materials, processes, tools, and machines and equipment, due to the miniaturization nature of the whole micromanufacturing system, which challenges the rapid development of micromanufacturing technology. Such a background has prompted and encouraged us to publish a scholarly book on the topic of the micromanufacturing of metallic materials, with the purpose of providing readers with a valuable document that can be used in the research and development of micromanufacturing technology. This book will be useful for both theoretical and applied research aimed at micromanufacturing technology, and will serve as an important research tool, providing knowledge to be returned to the community not only as valuable scientific literature, but also as technology, processes and productivities.

Download or read book Micromanufacturing of Metallic Materials written by Jingwei Zhao and published by . This book was released on 2021 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: Product miniaturization is a trend for facilitating product usage, enabling product functions to be implemented in microscale geometries, and aimed at reducing product weight, volume, cost and pollution. Driven by ongoing miniaturization in diverse areas, including medical devices, precision equipment, communication devices, micro-electromechanical systems and microsystems technology, the demands for micro metallic products have been tremendously increased. Such a trend requires the development of advanced technology for the micromanufacturing of metallic materials, with regard to producing high-quality micro metallic products that possess excellent dimensional tolerances, the required mechanical properties and improved surface quality. Micromanufacturing differs from conventional manufacturing technology in terms of materials, processes, tools, and machines and equipment, due to the miniaturization nature of the whole micromanufacturing system, which challenges the rapid development of micromanufacturing technology. Such a background has prompted and encouraged us to publish a scholarly book on the topic of the micromanufacturing of metallic materials, with the purpose of providing readers with a valuable document that can be used in the research and development of micromanufacturing technology. This book will be useful for both theoretical and applied research aimed at micromanufacturing technology, and will serve as an important research tool, providing knowledge to be returned to the community not only as valuable scientific literature, but also as technology, processes and productivities.

Download or read book Advanced Machining Processes of Metallic Materials written by Wit Grzesik and published by Elsevier. This book was released on 2016-11-15 with total page 610 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Machining Processes of Metallic Materials: Theory, Modelling and Applications, Second Edition, explores the metal cutting processes with regard to theory and industrial practice. Structured into three parts, the first section provides information on the fundamentals of machining, while the second and third parts include an overview of the effects of the theoretical and experimental considerations in high-level machining technology and a summary of production outputs related to part quality. In particular, topics discussed include: modern tool materials, mechanical, thermal and tribological aspects of machining, computer simulation of various process phenomena, chip control, monitoring of the cutting state, progressive and hybrid machining operations, as well as practical ways for improving machinability and generation and modeling of surface integrity. This new edition addresses the present state and future development of machining technologies, and includes expanded coverage on machining operations, such as turning, milling, drilling, and broaching, as well as a new chapter on sustainable machining processes. In addition, the book provides a comprehensive description of metal cutting theory and experimental and modeling techniques, along with basic machining processes and their effective use in a wide range of manufacturing applications. The research covered here has contributed to a more generalized vision of machining technology, including not only traditional manufacturing tasks, but also potential (emerging) new applications, such as micro and nanotechnology. Includes new case studies illuminate experimental methods and outputs from different sectors of the manufacturing industry Presents metal cutting processes that would be applicable for various technical, engineering, and scientific levels Includes an updated knowledge of standards, cutting tool materials and tools, new machining technologies, relevant machinability records, optimization techniques, and surface integrity

Download or read book Micro Manufacturing written by Muammer Koç and published by John Wiley & Sons. This book was released on 2011-05-06 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the first of its kind to collectively address design-based and mechanical micro-manufacturing topics in one place. It focuses on design and materials selection, as well as the manufacturing of micro-products using mechanical-based micro-manufacturing process technologies. After addressing the fundamentals and non-metallic-based micro-manufacturing processes in the semiconductor industry, it goes on to address specific metallic-based micro-manufacturing processes, such as: micro-forming, micro-machining, micro-molding, micro-laser processing, micro-layered manufacturing, micro-joining, micro-assembly and materials handling, and microEDM and ECM. The book provides an in-depth understanding of materials behavior at micro-scales and under different micro-scale processing conditions, while also including a wide variety of emerging micro-scale manufacturing issues and examples.

Download or read book Micromanufacturing Engineering and Technology written by Yi Qin and published by William Andrew. This book was released on 2010-07-02 with total page 429 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micromanufacturing Engineering and Technology presents applicable knowledge of technology, equipment and applications, and the core economic issues of micromanufacturing for anyone with a basic understanding of manufacturing, material, or product engineering. It explains micro-engineering issues (design, systems, materials, market and industrial development), technologies, facilities, organization, competitiveness, and innovation with an analysis of future potential. The machining, forming, and joining of miniature / micro-products are all covered in depth, covering: grinding/milling, laser applications, and photo chemical etching; embossing (hot & UV), injection molding and forming (bulk, sheet, hydro, laser); mechanical assembly, laser joining, soldering, and packaging. Presents case studies, material and design considerations, working principles, process configurations, and information on tools, equipment, parameters and control Explains the many facets of recently emerging additive / hybrid technologies and systems, incl: photo-electric-forming, liga, surface treatment, and thin film fabrication Outlines system engineering issues pertaining to handling, metrology, testing, integration and software Explains widely used micro parts in bio / medical industry, information technology and automotive engineering Covers technologies in high demand, such as: micro-mechanical-cutting, lasermachining, micro-forming, micro-EDM, micro-joining, photo-chemical-etching, photo-electro-forming, and micro-packaging

Download or read book Metal Micro forming written by Ken-ichi Manabe and published by MDPI. This book was released on 2020-11-04 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt: The miniaturization of industrial products is a global trend. Metal forming technology is not only suitable for mass production and excellent in productivity and cost reduction, but it is also a key processing method that is essential for products that utilize advantage of the mechanical and functional properties of metals. However, it is not easy to realize the processing even if the conventional metal forming technology is directly scaled down. This is because the characteristics of materials, processing methods, die and tools, etc., vary greatly with miniaturization. In metal micro forming technology, the size effect of major issues for micro forming have also been clarified academically. New processing methods for metal micro forming have also been developed by introducing new special processing techniques, and it is a new wave of innovation toward high precision, high degree of processing, and high flexibility. To date, several special issues and books have been published on micro-forming technology. This book contains 11 of the latest research results on metal micro forming technology. The editor believes that it will be very useful for understanding the state-of-the-art of metal micro forming technology and for understanding future trends.

Download or read book Innovative Development in Micromanufacturing Processes written by Pawan Kumar Rakesh and published by CRC Press. This book was released on 2023-11-23 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: Innovative Development in Micromanufacturing Processes details cutting edge technologies in micromanufacturing processes, an industry which has undergone a technological transformation in the past decade. Enabling engineers to create high performance, low cost, and long-lasting products, this book is an essential companion to all those working in micro and nano engineering. As products continue to get smaller and smaller, the field of micromanufacturing has gained an international audience. This book looks at both approaches of micromanufacturing: top-down and bottom-up. The top-down approach includes subtractive micromanufacturing processes such as microturning, micromilling, microdrilling, laser beam micromachining, and magnetic abrasive finishing. The bottom-up approach involves additive manufacturing processes such as micro-forming, micro deep drawing, microforging, microextrusion, and microwelding. Additionally, microjoining and microhybrid manufacturing processes are discussed in detail. The book also aids engineers and students in solving common manufacturing issues such as choice of materials and testing. The book will be of interest to those working in micro and nano engineering and machining, as well as students in manufacturing engineering, materials science, and more.

Download or read book Micromanufacturing Processes written by V.K. Jain and published by CRC Press. This book was released on 2016-04-19 with total page 429 pages. Available in PDF, EPUB and Kindle. Book excerpt: Increased demand for and developments in micromanufacturing have created a need for a resource that covers both the science and technology of this rapidly growing area. With contributions from eminent professors and researchers actively engaged in teaching, research, and development, Micromanufacturing Processes details the basic principles, tools,

Download or read book Microforming Technology written by Zhengyi Jiang and published by Academic Press. This book was released on 2017-03-22 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microforming Technology: Theory, Simulation and Practice addresses all aspects of micromanufacturing technology, presenting detailed technical information and the latest research developments. The book covers fundamentals, theory, simulation models, equipment and tools design, practical micromanufacturing procedures, and micromanufacturing-related supporting systems, such as laser heating system, hydraulic system and quality evaluation systems. Newly developed technology, including micro wedge rolling, micro flexible rolling and micro hydromechanical deep drawing, as well as traditional methods, such as micro deep drawing, micro bending and micro ultrathin strip rolling, are discussed. This will be a highly valuable resource for those involved in the use, study and design of micro products and micromanufacturing technologies, including engineers, scientists, academics and graduate students. Provides an accessible introduction to the fundamental theories of microforming, size effects, and scaling laws Includes explanations of the procedures, equipment, and tools for all common microforming technologies Explains the numerical modeling procedures for 7 different types of microforming

Download or read book Micromanufacturing written by Kornel F. Ehmann and published by Springer Science & Business Media. This book was released on 2007-04-29 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: This international technology assessment study has focused on the emerging global trend toward the miniaturization of manufacturing processes, equipment and systems for microscale components and products. The study has investigated both the state-of-the-art as well as emerging technologies from the scientific, technological, and commercialization perspectives across key industrial sectors in the USA, Asia and Europe.

Download or read book Micro Metal Forming written by Frank Vollertsen and published by Springer Science & Business Media. This book was released on 2013-05-13 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micro Metal Forming, i. e. forming of parts and features with dimensions below 1 mm, is a young area of research in the wide field of metal forming technologies, expanding the limits for applying metal forming towards micro technology. The essential challenges arise from the reduced geometrical size and the increased lot size. In order to enable potential users to apply micro metal forming in production, information about the following topics are given: tribological behavior: friction between tool and work piece as well as tool wear mechanical behavior: strength and formability of the work piece material, durability of the work pieces size effects: basic description of effects occurring due to the fact, that the quantitative relation between different features changes with decreasing size process windows and limits for forming processes tool making methods numerical modeling of processes and process chains quality assurance and metrology All topics are discussed with respect to the questions relevant to micro metal forming. The description comprises information from actual research and the young history of this technology branch to be used by students, scientists and engineers in industry who already have a background in metal forming and like to expand their knowledge towards miniaturization. tribological behavior: friction between tool and work piece as well as tool wear mechanical behavior: strength and formability of the work piece material, durability of the work pieces size effects: basic description of effects occurring due to the fact, that the quantitative relation between different features changes with decreasing size process windows and limits for forming processes tool making methods numerical modeling of processes and process chains quality assurance and metrology All topics are discussed with respect to the questions relevant to micro metal forming. The description comprises information from actual research and the young history of this technology branch to be used by students, scientists and engineers in industry who already have a background in metal forming and like to expand their knowledge towards miniaturization.

Download or read book Proceedings of the Second International Symposium on Electrochemical Microfabrication written by Keith Sheppard and published by The Electrochemical Society. This book was released on 1995 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Micromachining written by and published by BoD – Books on Demand. This book was released on 2024-05-29 with total page 110 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this volume, Micromachining - New Trends and Applications, researchers from distant parts of the world have combined efforts and contributed their ideas and research work on micromachining. Their chapters will give you the opportunity to learn about materials, techniques, applications, challenges, and recent advancements in micromachining technology as well as about the state of the current micromachining market. Chapters also discuss concepts of micro-scale electronic component manufacturing, advancements in micromachining techniques of micro-electromechanical system (MEMS) piezoresistive pressure sensors to minimize offset drift due to humidity and temperature, the principles and classifications of force measuring systems with zero-compliance suspension, and triangular microcavity fabrication using micro-electrical discharge machining.

Download or read book Modern Manufacturing Processes written by Muammer Koç and published by John Wiley & Sons. This book was released on 2019-09-04 with total page 549 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides an in-depth understanding of the fundamentals of a wide range of state-of-the-art materials manufacturing processes Modern manufacturing is at the core of industrial production from base materials to semi-finished goods and final products. Over the last decade, a variety of innovative methods have been developed that allow for manufacturing processes that are more versatile, less energy-consuming, and more environmentally friendly. This book provides readers with everything they need to know about the many manufacturing processes of today. Presented in three parts, Modern Manufacturing Processes starts by covering advanced manufacturing forming processes such as sheet forming, powder forming, and injection molding. The second part deals with thermal and energy-assisted manufacturing processes, including warm and hot hydrostamping. It also covers high speed forming (electromagnetic, electrohydraulic, and explosive forming). The third part reviews advanced material removal process like advanced grinding, electro-discharge machining, micro milling, and laser machining. It also looks at high speed and hard machining and examines advances in material modeling for manufacturing analysis and simulation. Offers a comprehensive overview of advanced materials manufacturing processes Provides practice-oriented information to help readers find the right manufacturing methods for the intended applications Highly relevant for material scientists and engineers in industry Modern Manufacturing Processes is an ideal book for practitioners and researchers in materials and mechanical engineering.

Download or read book Advances in Micro and Nano Manufacturing written by Davide Masato and published by Mdpi AG. This book was released on 2022-02-17 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micro- and nanomanufacturing technologies have been researched and developed in the industrial environment with the goal of supporting product miniaturization and the integration of new functionalities. The technological development of new materials and processing methods needs to be supported by predictive models which can simulate the interactions between materials, process states, and product properties. In comparison with the conventional manufacturing scale, micro- and nanoscale technologies require the study of different mechanical, thermal, and fluid dynamics, phenomena which need to be assessed and modeled. This Special Issue is dedicated to advances in the modeling of micro- and nanomanufacturing processes. The development of new models, validation of state-of-the-art modeling strategies, and approaches to material model calibration are presented. The goal is to provide state-of-the-art examples of the use of modeling and simulation in micro- and nanomanufacturing processes, promoting the diffusion and development of these technologies.

Download or read book Micromanufacturing and Nanotechnology written by Nitaigour P. Mahalik and published by Springer Science & Business Media. This book was released on 2006-01-16 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micromanufacturing and Nanotechnology is an emerging technological infrastructure and process that involves manufacturing of products and systems at the micro and nano scale levels. Development of micro and nano scale products and systems are underway due to the reason that they are faster, accurate and less expensive. Moreover, the basic functional units of such systems possesses remarkable mechanical, electronic and chemical properties compared to the macro-scale counterparts. Since this infrastructure has already become the prefered choice for the design and development of next generation products and systems it is now necessary to disseminate the conceptual and practical phenomenological know-how in a broader context. This book incorporates a selection of research and development papers. Its scope is the history and background, underlynig design methodology, application domains and recent developments.

Download or read book Hot Embossing written by Matthias Worgull and published by William Andrew. This book was released on 2009-09-28 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is an overview of replication technology for micro- and nanostructures, focusing on the techniques and technology of hot embossing, a scaleable and multi-purpose technology for the manufacture of devices such as BioMEMS and microfluidic devices which are expected to revolutionize a wide range of medical and industrial processes over the coming decade. The hot embossing process for replicating microstructures was developed by the Forschungszentrum Karlsruhe (Karlsruhe Institute of Technology) where the author is head of the Nanoreplication Group. Worgull fills a gap in existing information by fully detailing the technology and techniques of hot embossing. He also covers nanoimprinting, a process related to hot embossing, with examples of actual research topics and new applications in nanoreplication. *A practical and theoretical guide to selecting the materials, machinery and processes involved in microreplication using hot embossing techniques. *Compares different replication processes such as: micro injection molding, micro thermoforming, micro hot embossing, and nanoimprinting *Details commercially available hot embossing machinery and components like tools and mold inserts