Download or read book Micromachining with Nanostructured Cutting Tools written by Mark J. Jackson and published by Springer Science & Business Media. This book was released on 2012-09-21 with total page 60 pages. Available in PDF, EPUB and Kindle. Book excerpt: Stress-reducing defects and subsequent microcracks are a central focus during micromachining processes. After establishing the central process of micromachining Micromachining with Nanostructured Cutting Tools explains the underlying theories that describe chip formation and applies elementary cutting theory to machining at the microscale. Divided into three parts, the second half of Micromachining with Nanostructured Cutting Tools develops on this introduction; explaining how frictional interactions between uncoated and micro tools coated with nanostructered coatings can be characterized by using the elementary micromachining theories that were initially developed for machining at the macroscale. Shaw’s methods for calculating temperatures at the interaction zone and Merchant’s methods for calculating mechanical interactions are well described and justified for machining steel in both the dry and wet states. Finally, the further development and use of micro tools coated with thin-film nanostructured diamonds are shown. Micromachining with Nanostructured Cutting Tools is a resource for engineers and scientists working in this new field of micro and nanotechnology. The explanations of how to characterize, apply and adapt traditional approaches of understanding the mechanics of practical machining to the machining of microproducts using nanostructured tools provides a reliable reference for researchers and practitioners alike.

Download or read book Micromachining with Nanostructured Cutting Tools written by Mark J. Jackson and published by Springer Science & Business Media. This book was released on 2012-09-20 with total page 60 pages. Available in PDF, EPUB and Kindle. Book excerpt: Stress-reducing defects and subsequent microcracks are a central focus during micromachining processes. After establishing the central process of micromachining Micromachining with Nanostructured Cutting Tools explains the underlying theories that describe chip formation and applies elementary cutting theory to machining at the microscale. Divided into three parts, the second half of Micromachining with Nanostructured Cutting Tools develops on this introduction; explaining how frictional interactions between uncoated and micro tools coated with nanostructered coatings can be characterized by using the elementary micromachining theories that were initially developed for machining at the macroscale. Shaw’s methods for calculating temperatures at the interaction zone and Merchant’s methods for calculating mechanical interactions are well described and justified for machining steel in both the dry and wet states. Finally, the further development and use of micro tools coated with thin-film nanostructured diamonds are shown. Micromachining with Nanostructured Cutting Tools is a resource for engineers and scientists working in this new field of micro and nanotechnology. The explanations of how to characterize, apply and adapt traditional approaches of understanding the mechanics of practical machining to the machining of microproducts using nanostructured tools provides a reliable reference for researchers and practitioners alike.

Download or read book Machining with Nanomaterials written by Mark J. Jackson and published by Springer. This book was released on 2015-08-20 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the state-of-the-art developments in machining with nanomaterials. Numerous in-depth case studies illustrate the practical use of nanomaterials in industry, including how thin film nanostructures can be applied to solving machining problems and how coatings can improve tool life and reduce machining costs in an environmentally acceptable way. Chapters include discussions on, among other things: Comparisons of re-coated cutting tools and re-ground drills The modeling and machining of medical materials, particularly implants, for optimum biocompatibility including corrosion resistance, bio adhesiveness, and elasticity Recent developments in machining difficult-to-cut materials, as well as machining brittle materials using nanostructured diamond tools Spindle Speed Variation (SSV) for machining chatter suppression Nano grinding with abrasives to produce micro- and nano fluidic devices. The importance of proper design of cutting tools, including milling tools, single point turning tools, and micro cutting tools is reinforced throughout the book. This is an ideal book for engineers in industry, practitioners, students, teachers, and researchers.

Download or read book Emerging Nanotechnologies for Manufacturing written by Waqar Ahmed and published by William Andrew. This book was released on 2009-11-24 with total page 413 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanotechnology is a technology on the verge of commercialization. In this important work, an unrivalled team of international experts provides an exploration of the emerging nanotechnologies that are poised to make the nano-revolution a reality in the manufacturing sector. From their different perspectives, the contributors explore how developments in nanotechnology are transforming areas as diverse as medicine, advanced materials, energy, electronics and agriculture. Key topics covered include: Characterization of nanostructures Bionanotechnology Nanoelectronics Micro- and nanomachining Self-assembly techniques New applications of carbon nanotubes Environmental and health impacts This book provides an important and in-depth guide to the applications and impact of nanotechnology to different manufacturing sectors. As such, it will find a broad readership, from R&D scientists and engineers to venture capitalists. About the Authors Waqar Ahmed is Chair of Nanotechnology & Advanced Manufacturing and the Director of the Institute of Advanced Manufacturing and Innovation at the University of Central Lancashire, UK. He has contributed to the wider industrial adoption of surface coating solutions through fundamental research and modeling of gas phase processes in CVD and studies of tribological behavior. Mark J. Jackson is a Professor at the Birck Nanotechnology Center and Center for Advanced Manufacturing, College of Technology at Purdue University. Dr Jackson is active in research work concerned with understanding the properties of materials in the field of microscale metal cutting, micro- and nanoabrasive machining, and laser micromachining. He is also involved in developing next generation manufacturing processes and biomedical engineering. Explains how to use biological pathways to produce nanoelectric devices Presents data on new, experimental designs Discusses the history of carbon nanotubes and how they are synthesized to fabricate novel nanostructures (incl. data on laser ablation) Extensive use of illustrations, tables, and figures throughout

Download or read book Micromanufacturing and Nanotechnology written by Nitaigour P. Mahalik and published by Springer Science & Business Media. This book was released on 2006-01-16 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micromanufacturing and Nanotechnology is an emerging technological infrastructure and process that involves manufacturing of products and systems at the micro and nano scale levels. Development of micro and nano scale products and systems are underway due to the reason that they are faster, accurate and less expensive. Moreover, the basic functional units of such systems possesses remarkable mechanical, electronic and chemical properties compared to the macro-scale counterparts. Since this infrastructure has already become the prefered choice for the design and development of next generation products and systems it is now necessary to disseminate the conceptual and practical phenomenological know-how in a broader context. This book incorporates a selection of research and development papers. Its scope is the history and background, underlynig design methodology, application domains and recent developments.

Download or read book Micro Cutting written by Dehong Huo and published by John Wiley & Sons. This book was released on 2013-07-30 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micro-Cutting: Fundamentals and Applications comprehensively covers the state of the art research and engineering practice in micro/nano cutting: an area which is becoming increasingly important, especially in modern micro-manufacturing, ultraprecision manufacturing and high value manufacturing. This book provides basic theory, design and analysis of micro-toolings and machines, modelling methods and techniques, and integrated approaches for micro-cutting. The fundamental characteristics, modelling, simulation and optimization of micro/nano cutting processes are emphasized with particular reference to the predictabilty, producibility, repeatability and productivity of manufacturing at micro and nano scales. The fundamentals of micro/nano cutting are applied to a variety of machining processes including diamond turning, micromilling, micro/nano grinding/polishing, ultraprecision machining, and the design and implementation of micro/nano cutting process chains and micromachining systems. Key features • Contains contributions from leading global experts • Covers the fundamental theory of micro-cutting • Presents applications in a variety of machining processes • Includes examples of how to implement and apply micro-cutting for precision and micro-manufacturing Micro-Cutting: Fundamentals and Applications is an ideal reference for manufacturing engineers, production supervisors, tooling engineers, planning and application engineers, as well as machine tool designers. It is also a suitable textbook for postgraduate students in the areas of micro-manufacturing, micro-engineering and advanced manufacturing methods.

Download or read book Functional Reverse Engineering of Machine Tools written by Wasim Ahmed Khan and published by CRC Press. This book was released on 2019-09-23 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this book is to develop capacity building in strategic and non-strategic machine tool technology. The book contains chapters on how to functionally reverse engineer strategic and non-strategic computer numerical control machinery. Numerous engineering areas, such as mechanical engineering, electrical engineering, control engineering, and computer hardware and software engineering, are covered. The book offers guidelines and covers design for machine tools, prototyping, augmented reality for machine tools, modern communication strategies, and enterprises of functional reverse engineering, along with case studies. Features Presents capacity building in machine tool development Discusses engineering design for machine tools Covers prototyping of strategic and non-strategic machine tools Illustrates augmented reality for machine tools Includes Internet of Things (IoT) for machine tools

Download or read book Nano and Micromachining written by J. Paulo Davim and published by John Wiley & Sons. This book was released on 2013-03-04 with total page 257 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides the fundamentals and recent advances in nano and micromachining for modern manufacturing engineering. It begins by providing an outline of nanomachining with emphasis being given to molecular dynamics, cutting, and chip formation, before discussing various advances in field and machining processes, including advances in diamond cutting tools, conventional processes (microturning, microdrilling, micromilling, etc.), grinding and ultra-precision processes, and non-conventional machining processes (laser micromachining, EDM micromachining, etc.). The coverage concludes with an evaluation of subsurface damages in nano and micromachining and a presentation of applications in industry. As such, not only is this book useful to those studying engineering or machining at both an undergraduate and postgraduate level, but it also serves as a useful reference guide for academics and engineers involved in these areas and related industries.

Download or read book Micro and Nanomanufacturing written by Mark J. Jackson and published by Springer Science & Business Media. This book was released on 2007-06-19 with total page 708 pages. Available in PDF, EPUB and Kindle. Book excerpt: This, the corrected second printing of Jackson’s authoritative volume on the subject, provides a comprehensive treatment of established micro and nanofabrication techniques. It addresses the needs of practicing manufacturing engineers by applying established and research laboratory manufacturing techniques to a wide variety of materials. Nanofabrication and nanotechnology present a great challenge to engineers and researchers as they manipulate atoms and molecules to produce single artifacts and submicron components and systems. The book provides up-to-date information on a number of subjects of interest to engineers who are seeking more knowledge of how nano and micro devices are designed and fabricated. They will learn about manufacturing and fabrication techniques at the micro and nanoscales; using bulk and surface micromachining techniques, and LiGA, and deep x-ray lithography to manufacture semiconductors. Also covered are subjects including producing master molds with micromachining, the deposition of thin films, pulsed water drop machining, and nanomachining.

Download or read book Fabrication and Characterization in the Micro Nano Range written by Fernando A. Lasagni and published by Springer Science & Business Media. This book was released on 2011-03-23 with total page 227 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book shows an update in the field of micro/nano fabrications techniques of two and three dimensional structures as well as ultimate three dimensional characterization methods from the atom range to the micro scale. Several examples are presented showing their direct application in different technological fields such as microfluidics, photonics, biotechnology and aerospace engineering, between others. The effects of the microstructure and topography on the macroscopic properties of the studied materials are discussed, together with a detailed review of 3D imaging techniques.

Download or read book Anti Abrasive Nanocoatings written by M Aliofkhazraei and published by Elsevier. This book was released on 2014-12-09 with total page 627 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an overview of the fabrication methods for anti-abrasive nanocoatings. The connections among fabrication parameters, the characteristics of nanocoatings and the resulting properties (i.e. nanohardness, toughness, wear rate, load-bearing ability, friction coefficient, and scratch resistance) are discussed. Size-affected mechanical properties of nanocoatings are examined, including their uses. Anti-abrasive nanocoatings, including metallic-, ceramic-, and polymeric-based layers, as well as different kinds of nanostructures, such as multi-layered nanocomposites and thin films, are reviewed. Provides a comprehensive overview of the fabrication methods for anti-abrasive nanocoatings Discusses the connections among fabrication parameters, the characteristics of nanocoatings and the resulting properties Reviews advantages and drawbacks of fabrication methods for anti-abrasive nanocoatings and clarifies the place of these nanocoatings in the world of nanotechnology

Download or read book Micromachines as Tools for Nanotechnology written by Hiroyuki Fujita and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: Addresses the use of MEMS (micro-electro-mechanical systems) and micromachined devices for the investigation of nanoscience and technology, as well as biotechnology. Such micromachined tools for nanotechnology can enhance the sensitivity, spatial resolution, dexterity, selectivity, and parallel processing capability in measuring and manipulating nano-objects. The book covers state-of-the-art MEMS and NEMS devices for DNA molecular handling and analysis, cell handling and culture on a chip, chemical lab-on-a-chip, multi-probes for vacuum tunneling microscopy and AFM, and characterization of quantum semiconductor structures. Readers will gain deep insight into such developments and students will learn about the emerging field of MEMS and nanotechnology

Download or read book Micromanufacturing Processes written by V.K. Jain and published by CRC Press. This book was released on 2012-10-15 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: Increased demand for and developments in micromanufacturing have created a need for a resource that covers both the science and technology of this rapidly growing area. With contributions from eminent professors and researchers actively engaged in teaching, research, and development, Micromanufacturing Processes details the basic principles, tools, techniques, and latest advances in micromanufacturing processes. It includes coverage of measurement techniques and research trends as well as a large number of cross-references, making it useful to the students and researchers alike. The book outlines the challenges faced not only in micromanufacturing but also in meso- and nanomanufacturing, exploring topics such as micromachining, micro welding, microforming, micromolding, nanofinishing and micro-/nano-metrology. It includes examples that demonstrate the capabilities of fabricating micro- / nano-products and micro- / nano-features on the macro and micro products. The text also discusses nanofinishing techniques giving surface finish in the domain of sub-nano level, micro welding techniques, namely, laser beam micro welding, electron beam micro welding, micro / nano patterning in large quantities, and micro / nano metrology principles and equipments. It goes on to describe devices such as nano spring, micro mixer, micro cantilever, to name just a few. Unique in its level of coverage, the book highlights new challenges in manufacturing and covers several different types of micromanufacturing processes, such as micromachining, microforming, microcasting, microjoining, nanofinishing, and micrometrology. The level of details, extensive references, figures, and diagrams make the book a reference that will become the standard for this field.

Download or read book Microfabrication and Nanomanufacturing written by Mark J. Jackson and published by CRC Press. This book was released on 2005-11-10 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanotechnology, seen as the next leap forward in the industrial revolution, requires that manufacturers develop processes that revolutionize the way small products are made. Microfabrication and Nanomanufacturing focuses on the technology of fabrication and manufacturing of engineering materials at these levels. The book provides an overview of techniques used in the semiconductor industry. It also discusses scaling and manufacturing processes operating at the nanoscale for non-semiconductor applications; the construction of nanoscale components using established lithographic techniques; bulk and surface micromachining techniques used for etching, machining, and molding procedures; and manufacturing techniques such as injection molding and hot embossing. This authoritative compilation describes non-traditional micro and nanoscale processing that uses a newly developed technique called pulsed water jet machining as well as the efficient removal of materials using optical energy. Additional chapters focus on the development of nanoscale processes for producing products other than semiconductors; the use of abrasive particles embedded in porous tools; and the deposition and application of nanocrystalline diamond. Economic factors are also presented and concern the promotion and commercialization of micro and nanoscale products and how demand will eventually drive the market.

Download or read book Surface Engineering written by Mark J. Jackson and published by ASM International. This book was released on 2006-01-01 with total page 223 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advances in Medical and Surgical Engineering written by Waqar Ahmed and published by Academic Press. This book was released on 2020-04-07 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Medical and Surgical Engineering integrates the knowledge and experience of experts from academia and practicing surgeons working with patients. The cutting-edge progress in medical technology applications is making the traditional line between engineering and medical science ever thinner. This is an excellent resource for biomedical engineers working in industry and academia on developing medical technologies. It covers challenges in the application of technology in the clinic with views from an editorial team that is highly experienced in engineering, biomaterials, surgical practice, biomedical science and technology, and that has a proven track record of publishing applied biomedical science and technology. For medical practitioners, this book covers advances in technology in their domain. For students, this book identifies the opportunities of research based on the reviews of utilization of current technologies. The content in this book can also be of interest to policymakers, research funding agencies, and libraries, that are contributing to development of medical technologies. Covers circulatory support, aortic valve implantation and microvascular antestmosis Explores arthroplasty of both the knee and the shoulder Includes tribology of materials, laser treatment and machining of biomaterial

Download or read book Advances in Sustainable Machining and Manufacturing Processes written by Kishor Kumar Gajrani and published by CRC Press. This book was released on 2022-05-18 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text provides an in-depth overview of sustainability in machining processes, challenges during machining of difficult-to-cut materials and different ways of green machining in achieving sustainability. It discusses important topics including green and sustainable machining, dry machining, textured cutting coated tools for machining, solid lubricants-based machining, gas-cooled machining, cryogenic cooling for intelligent machining, artificial neural network for machining, big data based machining, and hybrid intelligent machining. This book- Covers advances in sustainable machining such as gas-cooled machining, near dry machining, and minimum quantity lubrication. Explores use of big data, machine learning and artificial intelligence for machining processes. Provides case studies and experimental design as well as results with analysis focusing on achieving sustainability. Discusses artificial intelligence and machine learning based machining processes. Cover the latest applications of sustainable manufacturing for a better understanding of the concepts. The text is primarily written for senior undergraduate, graduate students, and researchers in the fields of mechanical, manufacturing, industrial, production engineering and materials science.