Download or read book Micromachining of Engineering Materials written by J.A. McGeough and published by CRC Press. This book was released on 2001-11-29 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explaining principles underlying the main micromachining practices currently being used and developed in industrial countries around the world, Micromachining of Engineering Materials outlines advances in material removal that have led to micromachining, discusses procedures for precise measurement, includes molecular-level theories, describes vapo

Download or read book Micromachining of Engineering Materials written by J.A. McGeough and published by CRC Press. This book was released on 2001-11-29 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explaining principles underlying the main micromachining practices currently being used and developed in industrial countries around the world, Micromachining of Engineering Materials outlines advances in material removal that have led to micromachining, discusses procedures for precise measurement, includes molecular-level theories, describes vaporizing workpiece material with spark discharges and photon light energy, examines mask-based and maskless anodic dissolution processes, investigates nanomachining by firing ions at surfaces to remove groups of atoms, analyzes the conversion of kinetic to thermal energy through a controlled fine-focused beam of electrons, and more.

Download or read book Micro and Nano Machining of Engineering Materials written by Kaushik Kumar and published by Springer. This book was released on 2018-09-26 with total page 155 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the recent developments in the production of micro and nano size products, which cater to the needs of the industry. The processes to produce the miniature sized products with unique characteristics are addressed. Moreover, their application in areas such as micro-engines, micro-heat exchangers, micro-pumps, micro-channels, printing heads and medical implants are also highlighted. The book presents such microsystem-based products as important contributors to a sustainable economy. The recent research in this book focuses on the development of new micro and nano manufacturing platforms while integrating the different technologies to manufacture the micro and nano components in a high throughput and cost effective manner. The chapters contain original theoretical and applied research in the areas of micro- and nano-manufacturing that are related to process innovation, accuracy, and precision, throughput enhancement, material utilization, compact equipment development, environmental and life-cycle analysis, and predictive modeling of manufacturing processes with feature sizes less than one hundred micrometers.

Download or read book Micro and Nano Machining of Engineering Materials written by Nisha Kumari and published by . This book was released on 2019 with total page 150 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the recent developments in the production of micro and nano size products, which cater to the needs of the industry. The processes to produce the miniature sized products with unique characteristics are addressed. Moreover, their application in areas such as micro-engines, micro-heat exchangers, micro-pumps, micro-channels, printing heads and medical implants are also highlighted. The book presents such microsystem-based products as important contributors to a sustainable economy. The recent research in this book focuses on the development of new micro and nano manufacturing platforms while integrating the different technologies to manufacture the micro and nano components in a high throughput and cost effective manner. The chapters contain original theoretical and applied research in the areas of micro- and nano-manufacturing that are related to process innovation, accuracy, and precision, throughput enhancement, material utilization, compact equipment development, environmental and life-cycle analysis, and predictive modeling of manufacturing processes with feature sizes less than one hundred micrometers.

Download or read book Femtosecond Laser Micromachining of Engineering Materials Process Parameters Study and Microrapid Prototyping written by Nitin Uppal and published by . This book was released on 2005 with total page 100 pages. Available in PDF, EPUB and Kindle. Book excerpt: Femtosecond laser micromachining is a promising technology for micromachining of various engineering materials. The interaction mechanism of femtosecond laser pulses with matter is completely different compared to traditional lasers. This work presents a detailed study on the ablation of common engineering materials in air with femtosecond laser pulses. The single and multi-shot ablation threshold fluence and incubation coefficient of Nickel, SMA, Tungsten, PZT, Copper, Cobalt, Stainless Steel, Iron, Titanium, Brass and Aluminum are evaluated. The morphological changes on the material are discussed along with the identification of gentle and strong ablation phases.

Download or read book Abrasive Water Jet Machining of Engineering Materials written by Jagadish and published by Springer Nature. This book was released on 2019-11-25 with total page 77 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents insights in green techniques used in conventional and advanced machining. It consists of various experimental case studies conducted by the authors on green machining of difficult-to-machine materials, polymer and ceramic materials. Effects of green techniques / processes on machining properties like material removal rate, surface quality, geometric accuracy, productivity, and environment while machining various materials are reported.

Download or read book Materials Forming and Machining written by J. Paulo Davim and published by Woodhead Publishing. This book was released on 2015-10-20 with total page 203 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials Forming and Machining: Research and Development publishes refereed, high quality articles with a special emphasis on research and development in forming materials, machining, and its applications. A large family of manufacturing processes are now involved in material formation, with plastic deformation and other techniques commonly used to change the shape of a workpiece. Materials forming techniques discussed in the book include extrusion, forging, rolling, drawing, sheet metal forming, microforming, hydroforming, thermoforming, and incremental forming, among others. In addition, traditional machining, non-traditional machining, abrasive machining, hard part machining, high speed machining, high efficiency machining, and micromachining are also explored, proving that forming technologies and machining can be applied to a wide variety of materials. Presents the family of manufacturing processes involved in material formation Includes traditional and non-traditional machining methods Consists of high-quality refereed articles by researchers from leading institutions Places special emphasis on research and development in forming materials and machining and its applications

Download or read book Laser Fabrication and Machining of Materials written by Narendra B. Dahotre and published by Springer Science & Business Media. This book was released on 2008-01-25 with total page 565 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the fundamental principles and physical phenomena behind laser-based fabrication and machining processes. It also gives an overview of their existing and potential applications. With laser machining an emerging area in various applications ranging from bulk machining in metal forming to micromachining and microstructuring, this book provides a link between advanced materials and advanced manufacturing techniques. The interdisciplinary approach of this text will help prepare students and researchers for the next generation of manufacturing.

Download or read book Abrasive Waterjet Machining of Engineering Materials written by Jun Wang and published by Trans Tech Publications Ltd. This book was released on 2003-04-30 with total page 114 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing industry is becoming ever more time-conscious with regard to the global economy, and the need for rapid prototyping and small production batches is increasing. These trends have placed a premium on the use of new and advanced technologies for quickly turning raw materials into usable goods; with no time being required for tooling. The need for advanced processing technologies is particularly evident when machining advanced materials, such as ceramics, composites and thermo-sensitive materials that have wide application but are considered to be "difficult-to-machine" using conventional machining technologies such as turning and milling. Abrasive waterjet (AWJ) machining has been found to be one of the advanced technologies that meet these processing requirements; due to its distinct advantages over other machining technologies.

Download or read book Non traditional Micromachining Processes written by Golam Kibria and published by Springer. This book was released on 2018-07-18 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a complete coverage of micromachining processes from their basic material removal phenomena to past and recent research carried by a number of researchers worldwide. Chapters on effective utilization of material resources, improved efficiency, reliability, durability, and cost effectiveness of the products are presented. This book provides the reader with new and recent developments in the field of micromachining and microfabrication of engineering materials.

Download or read book Micromachining written by Zdravko Stanimirović and published by BoD – Books on Demand. This book was released on 2019-11-20 with total page 174 pages. Available in PDF, EPUB and Kindle. Book excerpt: To present their work in the field of micromachining, researchers from distant parts of the world have joined their efforts and contributed their ideas according to their interest and engagement. Their articles will give you the opportunity to understand the concepts of micromachining of advanced materials. Surface texturing using pico- and femto-second laser micromachining is presented, as well as the silicon-based micromachining process for flexible electronics. You can learn about the CMOS compatible wet bulk micromachining process for MEMS applications and the physical process and plasma parameters in a radio frequency hybrid plasma system for thin-film production with ion assistance. Last but not least, study on the specific coefficient in the micromachining process and multiscale simulation of influence of surface defects on nanoindentation using quasi-continuum method provides us with an insight in modelling and the simulation of micromachining processes. The editors hope that this book will allow both professionals and readers not involved in the immediate field to understand and enjoy the topic.

Download or read book Nano and Micromachining written by J. Paulo Davim and published by John Wiley & Sons. This book was released on 2013-03-04 with total page 257 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides the fundamentals and recent advances in nano and micromachining for modern manufacturing engineering. It begins by providing an outline of nanomachining with emphasis being given to molecular dynamics, cutting, and chip formation, before discussing various advances in field and machining processes, including advances in diamond cutting tools, conventional processes (microturning, microdrilling, micromilling, etc.), grinding and ultra-precision processes, and non-conventional machining processes (laser micromachining, EDM micromachining, etc.). The coverage concludes with an evaluation of subsurface damages in nano and micromachining and a presentation of applications in industry. As such, not only is this book useful to those studying engineering or machining at both an undergraduate and postgraduate level, but it also serves as a useful reference guide for academics and engineers involved in these areas and related industries.

Download or read book Advanced Machining Processes of Metallic Materials written by Wit Grzesik and published by Elsevier. This book was released on 2016-11-15 with total page 610 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Machining Processes of Metallic Materials: Theory, Modelling and Applications, Second Edition, explores the metal cutting processes with regard to theory and industrial practice. Structured into three parts, the first section provides information on the fundamentals of machining, while the second and third parts include an overview of the effects of the theoretical and experimental considerations in high-level machining technology and a summary of production outputs related to part quality. In particular, topics discussed include: modern tool materials, mechanical, thermal and tribological aspects of machining, computer simulation of various process phenomena, chip control, monitoring of the cutting state, progressive and hybrid machining operations, as well as practical ways for improving machinability and generation and modeling of surface integrity. This new edition addresses the present state and future development of machining technologies, and includes expanded coverage on machining operations, such as turning, milling, drilling, and broaching, as well as a new chapter on sustainable machining processes. In addition, the book provides a comprehensive description of metal cutting theory and experimental and modeling techniques, along with basic machining processes and their effective use in a wide range of manufacturing applications. The research covered here has contributed to a more generalized vision of machining technology, including not only traditional manufacturing tasks, but also potential (emerging) new applications, such as micro and nanotechnology. - Includes new case studies illuminate experimental methods and outputs from different sectors of the manufacturing industry - Presents metal cutting processes that would be applicable for various technical, engineering, and scientific levels - Includes an updated knowledge of standards, cutting tool materials and tools, new machining technologies, relevant machinability records, optimization techniques, and surface integrity

Download or read book Manufacturing Processes for Engineering Materials written by Serope Kalpakjian and published by Prentice Hall. This book was released on 2008 with total page 1050 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive, up-to-date text has balance coverage of the fundamentals of materials and processes, its analytical approaches, and its applications in manufacturing engineering.

Download or read book Micromanufacturing Engineering and Technology written by Yi Qin and published by William Andrew. This book was released on 2010-07-02 with total page 429 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micromanufacturing Engineering and Technology presents applicable knowledge of technology, equipment and applications, and the core economic issues of micromanufacturing for anyone with a basic understanding of manufacturing, material, or product engineering. It explains micro-engineering issues (design, systems, materials, market and industrial development), technologies, facilities, organization, competitiveness, and innovation with an analysis of future potential. The machining, forming, and joining of miniature / micro-products are all covered in depth, covering: grinding/milling, laser applications, and photo chemical etching; embossing (hot & UV), injection molding and forming (bulk, sheet, hydro, laser); mechanical assembly, laser joining, soldering, and packaging. - Presents case studies, material and design considerations, working principles, process configurations, and information on tools, equipment, parameters and control - Explains the many facets of recently emerging additive / hybrid technologies and systems, incl: photo-electric-forming, liga, surface treatment, and thin film fabrication - Outlines system engineering issues pertaining to handling, metrology, testing, integration and software - Explains widely used micro parts in bio / medical industry, information technology and automotive engineering - Covers technologies in high demand, such as: micro-mechanical-cutting, lasermachining, micro-forming, micro-EDM, micro-joining, photo-chemical-etching, photo-electro-forming, and micro-packaging

Download or read book Micro and Precision Manufacturing written by Kapil Gupta and published by Springer. This book was released on 2017-10-15 with total page 201 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides details on various micro and precision manufacturing and finishing operations performed by conventional and advanced processes, including micro-manufacturing of micro-tools and precision finishing of engineered components. It describes the process mechanism, principles and parameters while performing micro-fabrication and precision finishing operations. The text provides the readers with knowledge of micro and precision manufacturing and encourages them to explore the future venues in this field.

Download or read book Machinability of Engineering Materials written by B. Mills and published by Springer. This book was released on 1983-04 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the manufacturing industries, despite the development and improvement of metal forming processes, a great deal of reliance is still placed on metal cutting processes and this will continue into the foreseeable future. Thus, there will continue to be a requirement for the development of improved cutting tool materials, workpiece materials, cutting fluids and testing methods; collectively this activity can be described as improving machinability. Machinability is a parameter which in many ways is vague, sometimes qualitative and very often misunderstood. The purpose of this text is to give a broad understanding of the concept, methods of assessment and ways of improving machinability to the manufacturing engineer, the metallurgist and the materials scientist. The text should also be of interest to those engaged in research in manufacturing engineering and metal cutting. The text, of necessity, does not attempt to give detailed information about the machining characteristics of a wide range of tool and workpiece materials. It is felt that this is beyond the scope of the book and is best left to other sources, such as machinability data banks and the Machining Handbook*, whose main objective is to present this kind of information. It is hoped that the reader will be able to progress logically from the fundamental aspects of the metal cutting process to the sections on the more specific topics of machinability including machinability testing and the properties of tool and workpiece materials which affect their machining performance.