Download or read book Microengineering Aerospace Systems written by Henry Helvajian and published by AIAA. This book was released on 1999 with total page 748 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microengineering Aerospace Systems is a textbook tutorial encompassing MEMS (micro-electromechanical systems), nanoelectronics, packaging, processing, and materials characterization for developing miniaturized smart instruments for aerospace systems (i.e., ASIM application-specific integrated microinstrument), satellites, and satellite subsystems. Third in a series of Aerospace Press publications covering this rapidly advancing technology, this work presents fundamental aspects of the technology and specific aerospace systems applications through worked examples.

Download or read book Microengineering Technology for Space Systems written by Henry Helvajian and published by AIAA. This book was released on 1997 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: A follow-on to Micro- and Nanotechnology for Space Systems, this second monograph in the series uses the more universal term microengineering to define the discipline and processes that lead to the development of an integrated and intelligent microinstrument. Microengineering Technology for Space Systems addresses specific issues concerning areas for ASIM application in current space systems, operation in the space environment, ultra-high-density packaging and nonsilicon materials-processing tools, and the feasibility of the nanosatellite concept.

Download or read book Dynamics of Meteor Outbursts and Satellite Mitigation Strategies written by Glenn E. Peterson and published by AIAA. This book was released on 1999 with total page 862 pages. Available in PDF, EPUB and Kindle. Book excerpt: The potential threat posed by Leonid meteroids to orbiting spacecraft over the next several years calls for new dynamic mitigation strategies to assist the satellite community in reducing the danger to its vehicles. This book offers deliberate dynamic mitigation strategies to complement the traditional shielding strategies, providing mission operators additional ways to decrease the danger. Five different attitude control and orbit maneuvering options are examined in detail. The information is presented in algorithmic form to allow technically competent, but meteoroid inexperienced, operators to easily understand the phenomena, assess the danger, and implement procedures. Although general in scope, the book emphasizes the Leonid meteor events of the 1998-2002 timeframe.

Download or read book Micro and Nanotechnology for Space Systems written by Henry Helvajian and published by AIAA. This book was released on 1997 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microengineering and microelectromechanical systems (MEMS) are a subject of considerable current interest involving research and development throughout the world. This first volume of a series on this topic reviews and evaluates micro- and nanotechnologies applicable to U.S. Air Force and commercial space systems. It introduces the concept of application-specific integrated microinstrument (ASIM), an intelligent microinstrument.

Download or read book MEMS Micro ElectroMechanical Systems in Aerospace Applications written by Technology Research Editors and published by Search-In-Print. This book was released on 2006-01-01 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Implantable Neural Prostheses 2 written by David Zhou and published by Springer Science & Business Media. This book was released on 2010-07-10 with total page 371 pages. Available in PDF, EPUB and Kindle. Book excerpt: Signi?cant progress has been made in the development of neural prostheses for restoration of human functions and improvement of the quality of life. Biomedical engineers and neuroscientists around the world are working to improve the design and performance of existing devices and to develop novel devices for arti?cial vision, arti?cial limbs, and brain-machine interfaces. This book, Implantable Neural Prostheses 2: Techniques and Engineering Approaches, is part two of a two-volume sequence that describes state-of-the-art advances in techniques associated with implantable neural prosthetic devices. The techniques covered include biocompatibility and biostability, hermetic packaging, electrochemical techniques for neural stimulation applications, novel electrode materials and testing, thin-?lm ?exible microelectrode arrays, in situ char- terization of microelectrode arrays, chip-size thin-?lm device encapsulation, microchip-embedded capacitors and microelectronics for recording, stimulation, and wireless telemetry. The design process in the development of medical devices is also discussed. Advances in biomedical engineering, microfabrication technology, and neu- science have led to improved medical-device designs and novel functions. However, many challenges remain. This book focuses on the engineering approaches, R&D advances, and technical challenges of medical implants from an engineering p- spective. We are grateful to leading researchers from academic institutes, national laboratories, as well as design engineers and professionals from the medical device industry who have contributed to the book. Part one of this series covers designs of implantable neural prosthetic devices and their clinical applications.

Download or read book Civil Commercial and International Remote Sensing Systems and Geoprocessing written by David L. Glackin and published by AIAA. This book was released on 1999 with total page 114 pages. Available in PDF, EPUB and Kindle. Book excerpt: Remote sensing and geospatial data processing are rapidly evolving and increasingly important fields with widespread applications. In this monograph, Glackin and Peltzer trace the evolution of remote sensing satellites and their instruments and geospatial data processing, document the state of the art, and present key trends emerging for the next decade. The authors emphasize the increasing commercialization and international expansion of the field, particularly in the field of imaging satellites and the use of geographic information systems to make remote sensing data more accessible.

Download or read book Implications of Emerging Micro and Nanotechnologies written by National Research Council and published by National Academies Press. This book was released on 2003-02-06 with total page 267 pages. Available in PDF, EPUB and Kindle. Book excerpt: Expansion of micro-technology applications and rapid advances in nano-science have generated considerable interest by the Air Force in how these developments will affect the nature of warfare and how it could exploit these trends. The report notes four principal themes emerging from the current technological trends: increased information capability, miniaturization, new materials, and increased functionality. Recommendations about Air Force roles in micro- and nanotechnology research are presented including those areas in which the Air Force should take the lead. The report also provides a number of technical and policy findings and recommendations that are critical for effective development of the Air Force's micro- and nano-science and technology program

Download or read book Advanced Space System Concepts and Technologies 2010 2030 written by Ivan Bekey and published by AIAA. This book was released on 2003 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bekey presents an imaginative view of what space could be like in the next several decades if new technologies are developed and bold new innovative applications are undertaken. He discusses a future environment for space activities very different from the predominant conditions of the past and present.

Download or read book Proceedings of the Workshop on Microtechnologies and Applications to Space Systems written by and published by . This book was released on 1993 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Mems for Automotive and Aerospace Applications written by Michael Kraft and published by Elsevier. This book was released on 2013-01-02 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: MEMS for automotive and aerospace applications reviews the use of Micro-Electro-Mechanical-Systems (MEMS) in developing solutions to the unique challenges presented by the automotive and aerospace industries. Part one explores MEMS for a variety of automotive applications. The role of MEMS in passenger safety and comfort, sensors for automotive vehicle stability control applications and automotive tire pressure monitoring systems are considered, along with pressure and flow sensors for engine management, and RF MEMS for automotive radar sensors. Part two then goes on to explore MEMS for aerospace applications, including devices for active drag reduction in aerospace applications, inertial navigation and structural health monitoring systems, and thrusters for nano- and pico-satellites. A selection of case studies are used to explore MEMS for harsh environment sensors in aerospace applications, before the book concludes by considering the use of MEMS in space exploration and exploitation. With its distinguished editors and international team of expert contributors, MEMS for automotive and aerospace applications is a key tool for MEMS manufacturers and all scientists, engineers and academics working on MEMS and intelligent systems for transportation. Chapters consider the role of MEMS in a number of automotive applications, including passenger safety and comfort, vehicle stability and control MEMS for aerospace applications are also discussed, including active drag reduction, inertial navigation and structural health monitoring systems Presents a number of case studies exploring MEMS for harsh environment sensors in aerospace

Download or read book Direct Write Technologies for Rapid Prototyping Applications written by Alberto Pique and published by Academic Press. This book was released on 2002 with total page 756 pages. Available in PDF, EPUB and Kindle. Book excerpt: Direct-Write Technologies covers applications, materials, and the techniques in using direct-write technologies. This book provides an overview of the different direct write techniques currently available, as well as a comparison between the strengths and special attributes for each of the techniques. The techniques described open the door for building prototypes and testing materials. The book also provides an overview of the state-of-the-art technology involved in this field. Basic academic researchers and industrial development engineers who pattern thin film materials will want to have this text on their shelves as a resource for specific applications. Others in this or related fields will want the book to read the introductory material summarizing isuses common to all approaches, in order to compare and contrast different techniques. Everyday applications include electronic components and sensors, especially chemical and biosensors. There is a wide range of research and development problems requiring state-of-the-art direct write tools. This book will appeal to basic researchers and development engineers in university engineering departments and at industrial and national research laboratories. This text should appeal equally well in the United States, Asia, and Europe. Both basic academic researchers and industrial development engineers who pattern thin film materials will want to have this text on their shelves as a resource for specific applications. An overview of the different direct write techniques currently available A comparison between the strengths and special attributes for each of the techniques An overview of the state-of-the-art technology involved in this field

Download or read book Spacecraft Thermal Control Handbook Cryogenics written by David G. Gilmore and published by AIAA. This book was released on 2002 with total page 674 pages. Available in PDF, EPUB and Kindle. Book excerpt: The number of satellite systems that require some form of cryogenic cooling has grown enormously over the last several years. With so many engineers, scientists, and technicians working on cryogenic systems for the first time in their careers, the need for a single resource that touched on all the technologies relevant to cryogenics was apparent.

Download or read book Aerospace America written by and published by . This book was released on 2000 with total page 744 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Micromanufacturing and Nanotechnology written by Nitaigour P. Mahalik and published by Springer Science & Business Media. This book was released on 2006 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micromanufacturing and Nanotechnology is an emerging technological infrastructure and process that involves manufacturing of products and systems at the micro and nano scale levels. Development of micro and nano scale products and systems are underway due to the reason that they are faster, accurate and less expensive. Moreover, the basic functional units of such systems possesses remarkable mechanical, electronic and chemical properties compared to the macro-scale counterparts. Since this infrastructure has already become the prefered choice for the design and development of next generation products and systems it is now necessary to disseminate the conceptual and practical phenomenological know-how in a broader context. This book incorporates a selection of research and development papers. Its scope is the history and background, underlynig design methodology, application domains and recent developments.

Download or read book Process Intensification written by David Reay and published by Butterworth-Heinemann. This book was released on 2013-06-05 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: Process Intensification: Engineering for Efficiency, Sustainability and Flexibility is the first book to provide a practical working guide to understanding process intensification (PI) and developing successful PI solutions and applications in chemical process, civil, environmental, energy, pharmaceutical, biological, and biochemical systems. Process intensification is a chemical and process design approach that leads to substantially smaller, cleaner, safer, and more energy efficient process technology. It improves process flexibility, product quality, speed to market and inherent safety, with a reduced environmental footprint. This book represents a valuable resource for engineers working with leading-edge process technologies, and those involved research and development of chemical, process, environmental, pharmaceutical, and bioscience systems. No other reference covers both the technology and application of PI, addressing fundamentals, industry applications, and including a development and implementation guide Covers hot and high growth topics, including emission prevention, sustainable design, and pinch analysis World-class authors: Colin Ramshaw pioneered PI at ICI and is widely credited as the father of the technology

Download or read book MEMS and Microsystems written by Tai-Ran Hsu and published by John Wiley & Sons. This book was released on 2020-07-16 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt: Technology/Engineering/Mechanical A bestselling MEMS text...now better than ever. An engineering design approach to Microelectromechanical Systems, MEMS and Microsystems remains the only available text to cover both the electrical and the mechanical aspects of the technology. In the five years since the publication of the first edition, there have been significant changes in the science and technology of miniaturization, including microsystems technology and nanotechnology. In response to the increasing needs of engineers to acquire basic knowledge and experience in these areas, this popular text has been carefully updated, including an entirely new section on the introduction of nanoscale engineering. Following a brief introduction to the history and evolution of nanotechnology, the author covers the fundamentals in the engineering design of nanostructures, including fabrication techniques for producing nanoproducts, engineering design principles in molecular dynamics, and fluid flows and heat transmission in nanoscale substances. Other highlights of the Second Edition include: * Expanded coverage of microfabrication plus assembly and packaging technologies * The introduction of microgyroscopes, miniature microphones, and heat pipes * Design methodologies for thermally actuated multilayered device components * The use of popular SU-8 polymer material Supported by numerous examples, case studies, and applied problems to facilitate understanding and real-world application, the Second Edition will be of significant value for both professionals and senior-level mechanical or electrical engineering students.