Download or read book Microelectronic Materials and Processes written by R.A. Levy and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 992 pages. Available in PDF, EPUB and Kindle. Book excerpt: The primary thrust of very large scale integration (VLS!) is the miniaturization of devices to increase packing density, achieve higher speed, and consume lower power. The fabrication of integrated circuits containing in excess of four million components per chip with design rules in the submicron range has now been made possible by the introduction of innovative circuit designs and the development of new microelectronic materials and processes. This book addresses the latter challenge by assessing the current status of the science and technology associated with the production of VLSI silicon circuits. It represents the cumulative effort of experts from academia and industry who have come together to blend their expertise into a tutorial overview and cohesive update of this rapidly expanding field. A balance of fundamental and applied contributions cover the basics of microelectronics materials and process engineering. Subjects in materials science include silicon, silicides, resists, dielectrics, and interconnect metallization. Subjects in process engineering include crystal growth, epitaxy, oxidation, thin film deposition, fine-line lithography, dry etching, ion implantation, and diffusion. Other related topics such as process simulation, defects phenomena, and diagnostic techniques are also included. This book is the result of a NATO-sponsored Advanced Study Institute (AS!) held in Castelvecchio Pascoli, Italy. Invited speakers at this institute provided manuscripts which were edited, updated, and integrated with other contributions solicited from non-participants to this AS!.
Download or read book Microelectronic Materials and Processes written by Roland Levy and published by Springer Science & Business Media. This book was released on 1989-01-31 with total page 1006 pages. Available in PDF, EPUB and Kindle. Book excerpt: The primary thrust of very large scale integration (VLS!) is the miniaturization of devices to increase packing density, achieve higher speed, and consume lower power. The fabrication of integrated circuits containing in excess of four million components per chip with design rules in the submicron range has now been made possible by the introduction of innovative circuit designs and the development of new microelectronic materials and processes. This book addresses the latter challenge by assessing the current status of the science and technology associated with the production of VLSI silicon circuits. It represents the cumulative effort of experts from academia and industry who have come together to blend their expertise into a tutorial overview and cohesive update of this rapidly expanding field. A balance of fundamental and applied contributions cover the basics of microelectronics materials and process engineering. Subjects in materials science include silicon, silicides, resists, dielectrics, and interconnect metallization. Subjects in process engineering include crystal growth, epitaxy, oxidation, thin film deposition, fine-line lithography, dry etching, ion implantation, and diffusion. Other related topics such as process simulation, defects phenomena, and diagnostic techniques are also included. This book is the result of a NATO-sponsored Advanced Study Institute (AS!) held in Castelvecchio Pascoli, Italy. Invited speakers at this institute provided manuscripts which were edited, updated, and integrated with other contributions solicited from non-participants to this AS!.
Download or read book Defects in Microelectronic Materials and Devices written by Daniel M. Fleetwood and published by CRC Press. This book was released on 2008-11-19 with total page 772 pages. Available in PDF, EPUB and Kindle. Book excerpt: Uncover the Defects that Compromise Performance and ReliabilityAs microelectronics features and devices become smaller and more complex, it is critical that engineers and technologists completely understand how components can be damaged during the increasingly complicated fabrication processes required to produce them.A comprehensive survey of defe
Download or read book Chemical Mechanical Planarization of Microelectronic Materials written by Joseph M. Steigerwald and published by John Wiley & Sons. This book was released on 2008-09-26 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical Mechanical Planarization (CMP) plays an important role in today's microelectronics industry. With its ability to achieve global planarization, its universality (material insensitivity), its applicability to multimaterial surfaces, and its relative cost-effectiveness, CMP is the ideal planarizing medium for the interlayered dielectrics and metal films used in silicon integrated circuit fabrication. But although the past decade has seen unprecedented research and development into CMP, there has been no single-source reference to this rapidly emerging technology-until now. Chemical Mechanical Planarization of Microelectronic Materials provides engineers and scientists working in the microelectronics industry with unified coverage of both the fundamental mechanisms and engineering applications of CMP. Authors Steigerwald, Murarka, and Gutmann-all leading CMP pioneers-provide a historical overview of CMP, explain the various chemical and mechanical concepts involved, describe CMP materials and processes, review the latest scientific data on CMP worldwide, and offer examples of its uses in the microelectronics industry. They provide detailed coverage of the CMP of various materials used in the making of microcircuitry: tungsten, aluminum, copper, polysilicon, and various dielectric materials, including polymers. The concluding chapter describes post-CMP cleaning techniques, and most chapters feature problem sets to assist readers in developing a more practical understanding of CMP. The only comprehensive reference to one of the fastest growing integrated circuit manufacturing technologies, Chemical Mechanical Planarization of Microelectronic Materials is an important resource for research scientists and engineers working in the microelectronics industry. An indispensable resource for scientists and engineers working in the microelectronics industry Chemical Mechanical Planarization of Microelectronic Materials is the only comprehensive single-source reference to one of the fastest growing integrated circuit manufacturing technologies. It provides engineers and scientists who work in the microelectronics industry with unified coverage of both the fundamental mechanisms and engineering applications of CMP, including: * The history of CMP * Chemical and mechanical underpinnings of CMP * CMP materials and processes * Applications of CMP in the microelectronics industry * The CMP of tungsten, aluminum, copper, polysilicon, and various dielectrics, including polymers used in integrated circuit fabrication * Post-CMP cleaning techniques * Chapter-end problem sets are also included to assist readers in developing a practical understanding of CMP.
Download or read book The Science and Engineering of Microelectronic Fabrication written by Stephen A. Campbell and published by Oxford University Press, USA. This book was released on 1996 with total page 572 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Science and Engineering of Microelectronic Fabrication provides an introduction to microelectronic processing. Geared towards a wide audience, it may be used as a textbook for both first year graduate and upper level undergraduate courses and as a handy reference for professionals. The text covers all the basic unit processes used to fabricate integrated circuits including photolithography, plasma and reactive ion etching, ion implantation, diffusion, oxidation, evaporation, vapor phase epitaxial growth, sputtering and chemical vapor deposition. Advanced processing topics such as rapid thermal processing, nonoptical lithography, molecular beam epitaxy, and metal organic chemical vapor deposition are also presented. The physics and chemistry of each process is introduced along with descriptions of the equipment used for the manufacturing of integrated circuits. The text also discusses the integration of these processes into common technologies such as CMOS, double poly bipolar, and GaAs MESFETs. Complexity/performance tradeoffs are evaluated along with a description of the current state-of-the-art devices. Each chapter includes sample problems with solutions. The book also makes use of the process simulation package SUPREM to demonstrate impurity profiles of practical interest.
Download or read book Die Attach Materials for High Temperature Applications in Microelectronics Packaging written by Kim S. Siow and published by Springer. This book was released on 2019-01-29 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the scientific principles, processing conditions, probable failure mechanisms, and a description of reliability performance and equipment required for implementing high-temperature and lead-free die attach materials. In particular, it addresses the use of solder alloys, silver and copper sintering, and transient liquid-phase sintering. While different solder alloys have been used widely in the microelectronics industry, the implementation of sintering silver and transient liquid-phase sintering remains limited to a handful of companies. Hence, the book devotes many chapters to sintering technologies, while simultaneously providing only a cursory coverage of the more widespread techniques employing solder alloys. Addresses the differences between sintering and soldering (the current die-attach technologies), thereby comprehensively addressing principles, methods, and performance of these high-temperature die-attach materials; Emphasizes the industrial perspective, with chapters written by engineers who have hands-on experience using these technologies; Baker Hughes, Bosch and ON Semiconductor, are represented as well as materials suppliers such as Indium; Simultaneously provides the detailed science underlying these technologies by leading academic researchers in the field.
Download or read book Microelectronics Processing written by Dennis W. Hess and published by . This book was released on 1989 with total page 572 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although chemical engineering principles are at the heart of solid state process technology, until now no reference volume addressing this relationship was available. This is the first book of its kind to tie fundamental engineering concepts to solid state process technology. Discussing the basic concepts involved--liquid-phase epitaxy, physical and chemical vapor deposition, diffusion and oxidation in silicon, resists in microlithography, etc.--this volume will be particularly useful in chemical engineering courses. It offers a framework within which specialized courses in microelectronics processing can be organized. In addition, it serves as a valuable reference source for all industrial engineers working with the individual process steps covered.
Download or read book Introduction to Microelectronic Fabrication written by Richard C. Jaeger and published by Pearson. This book was released on 2002 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: For courses in Theory and Fabrication of Integrated Circuits. The author's goal in writing this text was to present a concise survey of the most up-to-date techniques in the field. It is devoted exclusively to processing, and is highlighted by careful explanations, clear, simple language, and numerous fully-solved example problems. This work assumes a minimal knowledge of integrated circuits and of terminal behavior of electronic components such as resistors, diodes, and MOS and bipolar transistors.
Download or read book Fabrication Engineering at the Micro and Nanoscale written by Stephen A. Campbell and published by OUP USA. This book was released on 2008-01-10 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designed for advanced undergraduate or first-year graduate courses in semiconductor or microelectronic fabrication, the third edition of Fabrication Engineering at the Micro and Nanoscale provides a thorough and accessible introduction to all fields of micro and nano fabrication.
Download or read book Adhesives Technology for Electronic Applications written by James J. Licari and published by William Andrew. This book was released on 2011-06-24 with total page 415 pages. Available in PDF, EPUB and Kindle. Book excerpt: Approx.512 pagesApprox.512 pages
Download or read book Electron Beam Technology in Microelectronic Fabrication written by George Brewer and published by Elsevier. This book was released on 2012-12-02 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electron-Beam Technology in Microelectronic Fabrication presents a unified description of the technology of high resolution lithography. This book is organized into six chapters, each treating a major segment of the technology of high resolution lithography. The book examines topics such as the physics of interaction of the electrons with the polymer resist in which the patterns are drawn, the machines that generate and control the beam, and ways of applying electron-beam lithography in device fabrication and in the making of masks for photolithographic replication. Chapter 2 discusses fundamental processes by which patterns are created in resist masks. Chapter 3 describes electron-beam lithography machines, including some details of each of the major elements in the electron-optical column and their effect on the focused electron beam. Chapter 4 presents the use of electron-beam lithography to make discrete devices and integrated circuits. Chapter 5 looks at the techniques and economics of mask fabrication by the use of electron beams. Finally, Chapter 6 presents a comprehensive description and evaluation of the several high resolution replication processes currently under development. This book will be of great value to students and to engineers who want to learn the unique features of high resolution lithography so that they can apply it in research, development, or production of the next generation of microelectronic devices and circuits.
Download or read book Fundamentals of Semiconductor Manufacturing and Process Control written by Gary S. May and published by John Wiley & Sons. This book was released on 2006-05-26 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: A practical guide to semiconductor manufacturing from processcontrol to yield modeling and experimental design Fundamentals of Semiconductor Manufacturing and Process Controlcovers all issues involved in manufacturing microelectronic devicesand circuits, including fabrication sequences, process control,experimental design, process modeling, yield modeling, and CIM/CAMsystems. Readers are introduced to both the theory and practice ofall basic manufacturing concepts. Following an overview of manufacturing and technology, the textexplores process monitoring methods, including those that focus onproduct wafers and those that focus on the equipment used toproduce wafers. Next, the text sets forth some fundamentals ofstatistics and yield modeling, which set the foundation for adetailed discussion of how statistical process control is used toanalyze quality and improve yields. The discussion of statistical experimental design offers readers apowerful approach for systematically varying controllable processconditions and determining their impact on output parameters thatmeasure quality. The authors introduce process modeling concepts,including several advanced process control topics such asrun-by-run, supervisory control, and process and equipmentdiagnosis. Critical coverage includes the following: * Combines process control and semiconductor manufacturing * Unique treatment of system and software technology and managementof overall manufacturing systems * Chapters include case studies, sample problems, and suggestedexercises * Instructor support includes electronic copies of the figures andan instructor's manual Graduate-level students and industrial practitioners will benefitfrom the detailed exami?nation of how electronic materials andsupplies are converted into finished integrated circuits andelectronic products in a high-volume manufacturingenvironment. An Instructor's Manual presenting detailed solutions to all theproblems in the book is available from the Wiley editorialdepartment. An Instructor Support FTP site is also available.
Download or read book MEMS Materials and Processes Handbook written by Reza Ghodssi and published by Springer Science & Business Media. This book was released on 2011-03-18 with total page 1211 pages. Available in PDF, EPUB and Kindle. Book excerpt: MEMs Materials and Processes Handbook" is a comprehensive reference for researchers searching for new materials, properties of known materials, or specific processes available for MEMS fabrication. The content is separated into distinct sections on "Materials" and "Processes". The extensive Material Selection Guide" and a "Material Database" guides the reader through the selection of appropriate materials for the required task at hand. The "Processes" section of the book is organized as a catalog of various microfabrication processes, each with a brief introduction to the technology, as well as examples of common uses in MEMs.
Download or read book Microchip Fabrication 5th Ed written by Peter Van Zant and published by McGraw Hill Professional. This book was released on 2004-06-09 with total page 658 pages. Available in PDF, EPUB and Kindle. Book excerpt: The #1 book in the industry for more than 15 years! Utilizing a straightforward, math-free pathology, this is a novice-friendly guide to the semiconductor fabrication process from raw materials through shipping the finished, packaged device. Challenging quizzes and review summaries make this the perfect learning guide for technicians in training. * NEW chapter on nanotechnology * NEW sections on 300mm wafer processing * Processes and devices, and Green processing * Every chapter updated to reflect the latest processing techniques
Download or read book Dielectric Films for Advanced Microelectronics written by Mikhail Baklanov and published by John Wiley & Sons. This book was released on 2007-04-04 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt: The topic of thin films is an area of increasing importance in materials science, electrical engineering and applied solid state physics; with both research and industrial applications in microelectronics, computer manufacturing, and physical devices. Advanced, high-performance computers, high-definition TV, broadband imaging systems, flat-panel displays, robotic systems, and medical electronics and diagnostics are a few examples of the miniaturized device technologies that depend on the utilization of thin film materials. This book presents an in-depth overview of the novel developments made by the scientific leaders in the area of modern dielectric films for advanced microelectronic applications. It contains clear, concise explanations of material science of dielectric films and their problem for device operation, including high-k, low-k, medium-k dielectric films and also specific features and requirements for dielectric films used in the packaging technology. A broad range of related topics are covered, from physical principles to design, fabrication, characterization, and applications of novel dielectric films.
Download or read book Plasma Electronics written by Toshiaki Makabe and published by CRC Press. This book was released on 2006-03-27 with total page 355 pages. Available in PDF, EPUB and Kindle. Book excerpt: Without plasma processing techniques, recent advances in microelectronics fabrication would not have been possible. But beyond simply enabling new capabilities, plasma-based techniques hold the potential to enhance and improve many processes and applications. They are viable over a wide range of size and time scales, and can be used for deposition,
Download or read book Encapsulation Technologies for Electronic Applications written by Haleh Ardebili and published by William Andrew. This book was released on 2018-10-23 with total page 510 pages. Available in PDF, EPUB and Kindle. Book excerpt: Encapsulation Technologies for Electronic Applications, Second Edition, offers an updated, comprehensive discussion of encapsulants in electronic applications, with a primary emphasis on the encapsulation of microelectronic devices and connectors and transformers. It includes sections on 2-D and 3-D packaging and encapsulation, encapsulation materials, including environmentally friendly 'green' encapsulants, and the properties and characterization of encapsulants. Furthermore, this book provides an extensive discussion on the defects and failures related to encapsulation, how to analyze such defects and failures, and how to apply quality assurance and qualification processes for encapsulated packages. In addition, users will find information on the trends and challenges of encapsulation and microelectronic packages, including the application of nanotechnology. Increasing functionality of semiconductor devices and higher end used expectations in the last 5 to 10 years has driven development in packaging and interconnected technologies. The demands for higher miniaturization, higher integration of functions, higher clock rates and data, and higher reliability influence almost all materials used for advanced electronics packaging, hence this book provides a timely release on the topic. - Provides guidance on the selection and use of encapsulants in the electronics industry, with a particular focus on microelectronics - Includes coverage of environmentally friendly 'green encapsulants' - Presents coverage of faults and defects, and how to analyze and avoid them
