Download or read book Microcontrollers and Microcomputers written by Fredrick M. Cady and published by . This book was released on 2010 with total page 502 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book takes a unique "processor-agnostic" approach to teaching the core course on microcontrollers or embedded systems, taught at most schools of electrical and computer engineering. Most books for this course teach students using only one specific microcontroller in the class. Cady, however, studies the common ground between microcontrollers in one volume. As there is no other book available to serve this purpose in the classroom, readership is broadened to anyone who accepts its pedagogical value, not simply those courses that use the same microcontroller. Because the text is purposefully processor non-specific, it can be used with processor-specific material, such as manufacturer's data sheets and reference manuals, or with texts such as Software and Hardware Engineering: Motorola M68HC11 or Software and Hardware Engineering: Motorola M68HC12. The fundamental operation of standard microcontroller features such as parallel and serial I/O interfaces, interrupts, analog-to-digital conversion, and timers is covered, with attention paid to the electrical interfaces needed.
Download or read book Introduction to Microcontrollers written by G. Jack Lipovski and published by Elsevier. This book was released on 2004-09-28 with total page 485 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Microcontrollers is a comprehensive, introductory text/reference for electrical and computer engineers and students with little experience with a high-level programming language. It systematically teaches the programming of a microcontroller in assembly language, as well as C and C++. This books also covers the principles of good programming practice through top-down design and the use of data structures. It is suitable as an introductory text for a first course on microcomputers that demonstrates what a small computer can do. Shows how a computer executes instructions; Shows how a high-level programming language converts to assembler language; Shows how a microcontroller is interfaced to the outside world; Hundreds of examples, experiments, "brain-teasers" and motivators; More than 20 exercises at the end of each chapter
Download or read book Microcontroller Programming written by Syed R. Rizvi and published by CRC Press. This book was released on 2016-04-19 with total page 547 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microcontroller Programming: An Introduction is a comprehensive one-stop resource that covers the concepts, principles, solution development, and associated techniques involved in microcontroller-based systems. Focusing on the elements and features of the popular and powerful Motorola 68HC11 microcontroller IC as a representative example, this book
Download or read book Microcontroller and Embedded System written by A.K. Singh and published by New Age International. This book was released on 2008 with total page 18 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Digital System Design Use of Microcontroller written by Shenouda Dawoud and published by CRC Press. This book was released on 2022-09-01 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt: Embedded systems are today, widely deployed in just about every piece of machinery from toasters to spacecraft. Embedded system designers face many challenges. They are asked to produce increasingly complex systems using the latest technologies, but these technologies are changing faster than ever. They are asked to produce better quality designs with a shorter time-to-market. They are asked to implement increasingly complex functionality but more importantly to satisfy numerous other constraints. To achieve the current goals of design, the designer must be aware with such design constraints and more importantly, the factors that have a direct effect on them.One of the challenges facing embedded system designers is the selection of the optimum processor for the application in hand; single-purpose, general-purpose or application specific. Microcontrollers are one member of the family of the application specific processors.The book concentrates on the use of microcontroller as the embedded system?s processor, and how to use it in many embedded system applications. The book covers both the hardware and software aspects needed to design using microcontroller.The book is ideal for undergraduate students and also the engineers that are working in the field of digital system design.Contents• Preface;• Process design metrics;• A systems approach to digital system design;• Introduction to microcontrollers and microprocessors;• Instructions and Instruction sets;• Machine language and assembly language;• System memory; Timers, counters and watchdog timer;• Interfacing to local devices / peripherals;• Analogue data and the analogue I/O subsystem;• Multiprocessor communications;• Serial Communications and Network-based interfaces.
Download or read book Using Microprocessors and Microcomputers written by William C. Wray and published by Prentice Hall. This book was released on 1994 with total page 694 pages. Available in PDF, EPUB and Kindle. Book excerpt: The object of this book is to explain the uses and operation of the Motorola 6800 and 68000 families of microcomputer components to electronic technology and engineering students. Discussing today's most significant trends in the microcomputer and microcontroller worlds, it builds upon traditional coverage of 8-bit technology to include the exciting applications of Motorola's microcontrollers, and now goes beyond to include many new high-performance designs. Examines the fundamental concepts of the 68000 families of microprocessors that are used as the basis of many new microcontrollers.
Download or read book Design with Microcontrollers written by John B. Peatman and published by McGraw-Hill Companies. This book was released on 1988 with total page 654 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Microprocessors and Microcomputers written by Ronald J. Tocci and published by Prentice Hall. This book was released on 1979 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: Using the popular, powerful, and easy-to-understand 68HC11 microprocessor as a representative example, this book provides a comprehensive introduction to the concepts, principles, and techniques of microprocessors and microprocessor based systems. Chapter topics include Number Systems and Codes, Digital Circuits, Memory Devices, Introduction to Computers, Microcomputer Structure and Operation, The Microprocessor: Heart of the Microcomputer, Programming the 68HC11 MPU, Input/Output Modes, and Input/Output Interfacing. For those interested in a career in electrical or computer engineering.
Download or read book Microcontrollers written by Ajit Pal and published by PHI Learning Pvt. Ltd.. This book was released on 2011-08 with total page 389 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives a comprehensive coverage of different aspects of microcontroller-based system design and development in a generalized manner. Basic ideas and fundamental concepts common to all micro-controllers have been introduced before giving specific examples using the 8051 microcontroller, which is the most popular microcontroller in use today. Coverage of the three important issues such as hardware, software and hardware-software integration has been provided in a balanced manner. For easy understanding of the subject, a bottom-up approach has been followed. The book is designed for the undergraduate students of electrical engineering, computer science and engineering, and electronics and communication engineering. KEY FEATURES: Provides many pedagogical features such as learning objectives, introduction, examples, summary, fill in the blanks and chapter-end exercises to assist teaching and learning. Pays special attention to the interfacing of I/O devices for human interaction, and I/O devices for process control and instrumentation, which are important in the context of embedded systems. Gives comprehensive information about development aids and trouble-shooting techniques for the development of microcontroller-based systems. Includes a number of real-life application examples, with complete details of hardware and software implementation, after fabricating prototype models in the laboratory.
Download or read book Embedded Microcontroller Interfacing for M COR Systems written by G. Jack Lipovski and published by Elsevier. This book was released on 2000-08-22 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: The "M·CORE" family of microprocessors is the latest 32-bit integrated circuit from Motorola designed to be a multi-purpose "micro-controller." The processor architecture has been designed for high performance and cost-sensitive embedded control applications with particular emphasis on reduced power consumption. This is the first book on the programming of the new language instruction set using the M·CORE chip. Embedded Microcontroller Interfacing for M·CORE Systems is the third of a trio of books by G. Jack Lipovski from the University of Texas. The first two books are on assembly language programming for the new Motorola 6812 16-bit microcontroller, and were written to be textbooks and professional references. This book was written at the request of the Motorola design team for the professional users of its new and very successful M·CORE chip microcontrollers. Written with the complete cooperation and input of the M·CORE design engineers at their headquarters in Austin, Texas, this book covers all aspects of the programming software and hardware of the M·CORE chip. * First introductory level book on the Motorola MoCORE * Teaches engineers how a computer executes instructions * Shows how a high-level programming language converts to assembler language * Teaches the reader how a microcontroller is interfaced to the outside world * Hundreds of examples are used throughout the text * Over 200 homework problems give the reader in-depth practice * A CD-ROM with HIWARE's C++ compiler is included with the book * A complete summary chapter on other available microcontrollers
Download or read book Programming Microcontrollers in C written by Ted VanSickle and published by Newnes. This book was released on 2001 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to C -- Advanced C topics -- What are microcontrollers? -- Small 8-bit systems -- Programming large 8-bit systems -- Large microcontrollers -- Advanced topics in programming embedded systems (M68HC12) -- MCORE, a RISC machine.
Download or read book Advanced Microprocessors and Microcontrollers written by B. P. Singh and published by New Age International. This book was released on 2008 with total page 26 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Understanding Small Microcontrollers written by James M. Sibigtroth and published by Prentice Hall. This book was released on 1993 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Principles and Applications of Microcomputers written by Ming-Bo Lin and published by Createspace Independent Publishing Platform. This book was released on 2016-09-05 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: Principles and Applications of Microcomputers is a comprehensive textbook, which exemplifies the fundamental principles and applications of microcomputers with the most popular 8051 microcontroller and the Keil C51-MDK (microcomputer development kit). After reading this book, you will be able to design various microprocessor- or microcomputer-based application systems. The main features of this book are as follows: -- Partition the MCS-51 instruction set into many pedagogic groups suitable for entry-level readers and then illustrate them with an abundant number of examples. -- Introduce MCS-51 C programming with most popular topics and then balance the programming of assembly-language and C programs in the design of MCS-51 microcontroller applications. -- Divide the MCS-51 system into the software model and the hardware model. The software model is first introduced and then the hardware model follows. This way greatly facilitates the reader to study a microcomputer system. -- Discuss in detail features and applications of SRAM and Flash. The design of memory modules and the timing consideration related to the MCS-51 are also involved. -- Deal with the interrupt handling, system reset, and watchdog, as well as power control and management of the MCS-51 system. -- Detail I/O concepts and structures, serial/parallel data transfer and control, and ADC/DAC circuits, as well the structures and features of MCS-51 I/O ports, including serial port, SPI, and I2C. Besides, various timers/counters are dealt with in depth. -- Address the structures, functions, and applications of various timers/counters and programmable timers. -- Involve design principles of keyboards circuits, including both polling and interrupt methods, as well as circuit modules and applications of LED and LCD displays. -- Provide an abundance of review questions to each section to help readers evaluate their understandings about the topics introduced in the section. This book can be used as the textbook for the following courses and others: Assembly-Language Programming, Fundamental Principles of Microcomputers, or Principles and Applications of Microcomputers.
Download or read book Introduction to Microcontrollers written by G. Jack Lipovski and published by Academic Press. This book was released on 2004-09-10 with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt: The perfect choice for your one-semester course on Microcontrollers!
Download or read book An Introduction to PIC Microcontrollers written by R. A. Penfold and published by . This book was released on 1997 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt: One of the major developments in electronics recently has been the explosion in the popularity of microcontrollers, in particular the PIC series of processors. A microcontroller is effectively a simple computer on a single chip, complete with microprocessor, input/output ports, RAM and ROM to contain the program. A single 18 or 28 pin PIC processor can often replace a dozen or more conventional logic. Also, the versatility of a microprocessor based design means that it is often possible to incorporate useful extras in the design that would be difficult for impossible using conventional logic circuitry.
Download or read book Microprocessor Microcomputer and Their Applications written by A. K. Mukhopadhyay and published by Alpha Science International, Limited. This book was released on 2007 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microprocessor, Microcomputer and their Applications, 3/e, in three parts, covers the hardware, software and the applications of microcomputers. This book covers single chip microcomputers (microcontrollers) emphasizing on the architecture, memory organization, programming technique and a large number of programming examples. Interfacing techniques have been explained clearly with the aid of diagrams, charts and tables alongwith the input/output devices and controlling and peripheral devices.The book is intended for undergraduate and postgraduate students of Computer Science and Engineering, Electrical Engineering, Electronics and Allied fields of engineering and sciences.
