Download or read book Microcomputer Interfacing and Applications written by M A Mustafa and published by Butterworth-Heinemann. This book was released on 2016-01-21 with total page 471 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the applications guide to interfacing microcomputers. It offers practical non-mathematical solutions to interfacing problems in many applications including data acquisition and control. Emphasis is given to the definition of the objectives of the interface, then comparing possible solutions and producing the best interface for every situation. Dr Mustafa A Mustafa is a senior designer of control equipment and has written many technical articles and papers on the subject of computers and their application to control engineering.

Download or read book Microcomputer Interfacing written by Bruce A. Artwick and published by Prentice Hall. This book was released on 1980 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Integrates the information necessary to conceptualize, select, mate and match, build, and interface microcomputer systems to most applications.

Download or read book Microcomputer Interfacing written by Bruce A. Artwick and published by Prentice Hall. This book was released on 1980 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Integrates the information necessary to conceptualize, select, mate and match, build, and interface microcomputer systems to most applications.

Download or read book Microcomputer Design and Applications written by Samuel C. Lee and published by Academic Press. This book was released on 2014-05-12 with total page 359 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microcomputer Design and Applications provides information pertinent to the fundamental aspects of microcomputer design and applications. This book presents a design approach for multiple-processor computers. Organized into two parts encompassing 16 chapters, this book begins with an overview of a number system and supporting computational algorithms, which is especially useful for microcomputer control and digital signal processing. This text then presents an integrated technical and management-based method for developing microprocessor software. Other chapters consider file structures for a small-scale database system designed for microprocessor implementation and present the formulation of file structures for a typical microprocessor/flopping disk system. This book discusses as well the proposed solution to specify a high-level, machine-oriented, structured programming language suitable for general microprocessors and to implement a portable compiler for this language. The final chapter deals with a distributed processing system for non-invasive cardiac surveillance. This book is a valuable resource for engineers and computer scientists.

Download or read book Microcomputers written by Myron Hecht and published by . This book was released on 1984 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Principles and Applications of Microcomputers written by Ming-Bo Lin and published by Createspace Independent Publishing Platform. This book was released on 2016-09-05 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: Principles and Applications of Microcomputers is a comprehensive textbook, which exemplifies the fundamental principles and applications of microcomputers with the most popular 8051 microcontroller and the Keil C51-MDK (microcomputer development kit). After reading this book, you will be able to design various microprocessor- or microcomputer-based application systems. The main features of this book are as follows: -- Partition the MCS-51 instruction set into many pedagogic groups suitable for entry-level readers and then illustrate them with an abundant number of examples. -- Introduce MCS-51 C programming with most popular topics and then balance the programming of assembly-language and C programs in the design of MCS-51 microcontroller applications. -- Divide the MCS-51 system into the software model and the hardware model. The software model is first introduced and then the hardware model follows. This way greatly facilitates the reader to study a microcomputer system. -- Discuss in detail features and applications of SRAM and Flash. The design of memory modules and the timing consideration related to the MCS-51 are also involved. -- Deal with the interrupt handling, system reset, and watchdog, as well as power control and management of the MCS-51 system. -- Detail I/O concepts and structures, serial/parallel data transfer and control, and ADC/DAC circuits, as well the structures and features of MCS-51 I/O ports, including serial port, SPI, and I2C. Besides, various timers/counters are dealt with in depth. -- Address the structures, functions, and applications of various timers/counters and programmable timers. -- Involve design principles of keyboards circuits, including both polling and interrupt methods, as well as circuit modules and applications of LED and LCD displays. -- Provide an abundance of review questions to each section to help readers evaluate their understandings about the topics introduced in the section. This book can be used as the textbook for the following courses and others: Assembly-Language Programming, Fundamental Principles of Microcomputers, or Principles and Applications of Microcomputers.

Download or read book Embedded Microcomputer Systems written by Jonathan W. Valvano and published by Nelson Engineering. This book was released on 2012 with total page 793 pages. Available in PDF, EPUB and Kindle. Book excerpt: Embedded Microcomputer Systems: Real Time Interfacing provides an in-depth discussion of the design of real-time embedded systems using 9S12 microcontrollers. This book covers the hardware aspects of interfacing, advanced software topics (including interrupts), and a systems approach to typical embedded applications. This text stands out from other microcomputer systems books because of its balanced, in-depth treatment of both hardware and software issues important in real time embedded systems design. It features a wealth of detailed case studies that demonstrate basic concepts in the context of actual working examples of systems. It also features a unique simulation software package on the bound-in CD-ROM (called Test Execute and Simulate, or TexaS, for short) – that provides a self-contained software environment for designing, writing, implementing, and testing both the hardware and software components of embedded systems.

Download or read book An Introduction to Microcomputer Systems written by John Fulcher and published by Addison Wesley Publishing Company. This book was released on 1989 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a thoroughly modern and up-to-date introduction to microcomputer interfacing, as well as a general introduction to the fundamental of microcomputer architecture.

Download or read book Principles and Applications of Microcomputers written by Ming-Bo Lin and published by Createspace Independent Publishing Platform. This book was released on 2016-09-05 with total page 750 pages. Available in PDF, EPUB and Kindle. Book excerpt: Principles and Applications of Microcomputers is a comprehensive textbook, which exemplifies the fundamental principles and applications of microcomputers with the most popular 8051 microcontroller and the Keil C51-MDK (microcomputer development kit). After reading this book, you will be able to design various microprocessor- or microcomputer-based application systems. The main features of this book are as follows: -- Partition the MCS-51 instruction set into many pedagogic groups suitable for entry-level readers and then illustrate them with an abundant number of examples. -- Introduce MCS-51 C programming with most popular topics and then balance the programming of assembly-language and C programs in the design of MCS-51 microcontroller applications. -- Divide the MCS-51 system into the software model and the hardware model. The software model is first introduced and then the hardware model follows. This way greatly facilitates the reader to study a microcomputer system. -- Discuss in detail features and applications of SRAM and Flash. The design of memory modules and the timing consideration related to the MCS-51 are also involved. -- Deal with the interrupt handling, system reset, and watchdog, as well as power control and management of the MCS-51 system. -- Detail I/O concepts and structures, serial/parallel data transfer and control, and ADC/DAC circuits, as well the structures and features of MCS-51 I/O ports, including serial port, SPI, and I2C. Besides, various timers/counters are dealt with in depth. -- Address the structures, functions, and applications of various timers/counters and programmable timers. -- Involve design principles of keyboards circuits, including both polling and interrupt methods, as well as circuit modules and applications of LED and LCD displays. -- Provide an abundance of review questions to each section to help readers evaluate their understandings about the topics introduced in the section. This book can be used as the textbook for the following courses and others: Assembly-Language Programming, Fundamental Principles of Microcomputers, or Principles and Applications of Microcomputers.

Download or read book 8085 Microprocessor Interfacing and Applications written by Andrew C. Staugaard and published by . This book was released on 1989 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Principles and Applications of Microcomputers written by Ming-Bo Lin and published by Createspace Independent Publishing Platform. This book was released on 2016-09-05 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: Principles and Applications of Microcomputers is a comprehensive textbook, which exemplifies the fundamental principles and applications of microcomputers with the most popular 8051 microcontroller and the Keil C51-MDK (microcomputer development kit). After reading this book, you will be able to design various microprocessor- or microcomputer-based application systems. The main features of this book are as follows: -- Partition the MCS-51 instruction set into many pedagogic groups suitable for entry-level readers and then illustrate them with an abundant number of examples. -- Introduce MCS-51 C programming with most popular topics and then balance the programming of assembly-language and C programs in the design of MCS-51 microcontroller applications. -- Divide the MCS-51 system into the software model and the hardware model. The software model is first introduced and then the hardware model follows. This way greatly facilitates the reader to study a microcomputer system. -- Discuss in detail features and applications of SRAM and Flash. The design of memory modules and the timing consideration related to the MCS-51 are also involved. -- Deal with the interrupt handling, system reset, and watchdog, as well as power control and management of the MCS-51 system. -- Detail I/O concepts and structures, serial/parallel data transfer and control, and ADC/DAC circuits, as well the structures and features of MCS-51 I/O ports, including serial port, SPI, and I2C. Besides, various timers/counters are dealt with in depth. -- Address the structures, functions, and applications of various timers/counters and programmable timers. -- Involve design principles of keyboards circuits, including both polling and interrupt methods, as well as circuit modules and applications of LED and LCD displays. -- Provide an abundance of review questions to each section to help readers evaluate their understandings about the topics introduced in the section. This book can be used as the textbook for the following courses and others: Assembly-Language Programming, Fundamental Principles of Microcomputers, or Principles and Applications of Microcomputers.

Download or read book Microprocessor Interfacing written by R E Vears and published by Elsevier. This book was released on 2014-05-21 with total page 201 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microprocessor Interfacing provides the coverage of the Business and Technician Education Council level NIII unit in Microprocessor Interfacing (syllabus U86/335). Composed of seven chapters, the book explains the foundation in microprocessor interfacing techniques in hardware and software that can be used for problem identification and solving. The book focuses on the 6502, Z80, and 6800/02 microprocessor families. The technique starts with signal conditioning, filtering, and cleaning before the signal can be processed. The signal conversion, from analog to digital or vice versa, is explained to answer why conversion is necessary for the microcomputer or processor. The types of analogue to digital converter, voltage measurements, scaling, and interfacing with ADC to a microcomputer are all taken into account. After the signal has been converted into readable data, the date transfer techniques are described. For data between systems and subsystems to be efficient, the timing, electrical, I/O lines, serial data, and bus structure should be considered. A more detailed explanation of parallel I/O controllers as applied to Z80 PIO and the 6821 PIA follows. For serial I/O controllers, the serial data transfers, speed in baud rate, software routines, and ASCII codes are all examined. Finally, the dedicated I/O controllers involving keyboard encoding, the ASCII (QWERTY) keyboard interface, the visual display unit, cathode ray tube controller devices, and the drive controllers are discussed, as each of these requires one specific application. This book is useful for computer engineers, software engineers, computer technicians, teachers, and instructors in the field of computing learning. This text can also be an informative reading for those have great interest in computer hardware.

Download or read book Interfacing written by Stephen E. Derenzo and published by Prentice Hall. This book was released on 1990-01-01 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computer Applications -- Computers in other Systems.

Download or read book Microcomputer Theory and Applications with the Intel SDK 85 written by Mohamed Rafiquzzaman and published by John Wiley & Sons. This book was released on 1987 with total page 792 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing an introduction to microprocessor and microcomputer theory and application, this edition features new treatment of 16- and 32-bit microprocessors such as the Intel 8086 and the Motorolla 6800. It discusses assembly language programming, Input/Output interface of typical 16-bit microprocessors and printer and CRT interfacing. Also included is a brief review of digital principles and circuits for those with little background in these areas. End-of-chapter problems to reinforce students' understanding of the concepts are incorporated into the text.

Download or read book Computer Interfacing written by William H. Rigby and published by Prentice Hall. This book was released on 1995 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written for courses in Microcomputer, Computer Applications, Computer Interfacing or Peripherals. The text applies personal computers to applications in electronics. Book can be widely used in the lab. This combination text/laboratory manual explores the use of personal computers e.g., interfacing, digital I/O, analog I/O, data acquisition, etc. to control external electrical devices such as pumps, fans, and other devices. It describes the use of standard "off-the-shelf" interfacing boards, the application of common personal computers, and specific practical interfacing and control applications.

Download or read book Microprocessor Microcomputer and Their Applications written by A. K. Mukhopadhyay and published by Alpha Science International, Limited. This book was released on 2007 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microprocessor, Microcomputer and their Applications, 3/e, in three parts, covers the hardware, software and the applications of microcomputers. This book covers single chip microcomputers (microcontrollers) emphasizing on the architecture, memory organization, programming technique and a large number of programming examples. Interfacing techniques have been explained clearly with the aid of diagrams, charts and tables alongwith the input/output devices and controlling and peripheral devices.The book is intended for undergraduate and postgraduate students of Computer Science and Engineering, Electrical Engineering, Electronics and Allied fields of engineering and sciences.

Download or read book Embedded Microcomputer Systems written by Jonathan W. Valvano and published by . This book was released on 2006-03 with total page 814 pages. Available in PDF, EPUB and Kindle. Book excerpt: Embedded Microcomputer Systems: Real Time Interfacing provides an in-depth discussion of the design of real-time embedded systems using the Freescale 6811 and 9S12 microcontrollers. This book covers the hardware aspects of interfacing, advanced software topics (including interrupts), and a systems approach to typical embedded applications. This text stands out from other microcomputer systems books because of its balanced, in-depth treatment of both hardware and software issues important in real time embedded systems design. It features a wealth of detailed case studies that demonstrate basic concepts in the context of actual working examples of systems. It also features a unique simulation software package on the bound-in CD-ROM (called Test Execute and Simulate, or TexaS, for short) - that provides a self-contained software environment for designing, writing, implementing, and testing both the hardware and software components of embedded systems.