Download or read book Microchip Fabrication 5th Ed written by Peter Van Zant and published by McGraw Hill Professional. This book was released on 2004-06-09 with total page 658 pages. Available in PDF, EPUB and Kindle. Book excerpt: The #1 book in the industry for more than 15 years! Utilizing a straightforward, math-free pathology, this is a novice-friendly guide to the semiconductor fabrication process from raw materials through shipping the finished, packaged device. Challenging quizzes and review summaries make this the perfect learning guide for technicians in training. * NEW chapter on nanotechnology * NEW sections on 300mm wafer processing * Processes and devices, and Green processing * Every chapter updated to reflect the latest processing techniques
Download or read book Microchip Fabrication Sixth Edition written by Peter Van Zant and published by McGraw Hill Professional. This book was released on 2013-10-22 with total page 577 pages. Available in PDF, EPUB and Kindle. Book excerpt: The most complete, current guide to semiconductor processing Fully revised to cover the latest advances in the field, Microchip Fabrication, Sixth Edition explains every stage of semiconductor processing, from raw material preparation to testing to packaging and shipping the finished device. This practical resource provides easy-to-understand information on the physics, chemistry, and electronic fundamentals underlying the sophisticated manufacturing materials and processes of modern semiconductors. State-of-the-art processes and cutting-edge technologies used in the patterning, doping, and layering steps are discussed in this new edition. Filled with detailed illustrations and real-world examples, this is a comprehensive, up-to-date introduction to the technological backbone of the high-tech industry. COVERAGE INCLUDES: The semiconductor industry Properties of semiconductor materials and chemicals Crystal growth and silicon wafer preparation Wafer fabrication and packaging Contamination control Productivity and process yields Oxidation The ten-step patterning process--surface preparation to exposure; developing to final inspection Next generation lithography Doping Layer deposition Metallization Process and device evaluation The business of wafer fabrication Devices and integrated circuit formation Integrated circuits Packaging
Download or read book Microchip Fabrication A Practical Guide to Semiconductor Processing Sixth Edition written by Peter Van Zant and published by McGraw-Hill Education. This book was released on 2014-01-07 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt: Publisher's Note: Products purchased from Third Party sellers are not guaranteed by the publisher for quality, authenticity, or access to any online entitlements included with the product. The most complete, current guide to semiconductor processing Fully revised to cover the latest advances in the field, Microchip Fabrication, Sixth Edition explains every stage of semiconductor processing, from raw material preparation to testing to packaging and shipping the finished device. This practical resource provides easy-to-understand information on the physics, chemistry, and electronic fundamentals underlying the sophisticated manufacturing materials and processes of modern semiconductors. State-of-the-art processes and cutting-edge technologies used in the patterning, doping, and layering steps are discussed in this new edition. Filled with detailed illustrations and real-world examples, this is a comprehensive, up-to-date introduction to the technological backbone of the high-tech industry. COVERAGE INCLUDES: The semiconductor industry Properties of semiconductor materials and chemicals Crystal growth and silicon wafer preparation Wafer fabrication and packaging Contamination control Productivity and process yields Oxidation The ten-step patterning process--surface preparation to exposure; developing to final inspection Next generation lithography Doping Layer deposition Metallization Process and device evaluation The business of wafer fabrication Devices and integrated circuit formation Integrated circuits Packaging
Download or read book Fundamentals of Semiconductor Manufacturing and Process Control written by Gary S. May and published by John Wiley & Sons. This book was released on 2006-05-26 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: A practical guide to semiconductor manufacturing from processcontrol to yield modeling and experimental design Fundamentals of Semiconductor Manufacturing and Process Controlcovers all issues involved in manufacturing microelectronic devicesand circuits, including fabrication sequences, process control,experimental design, process modeling, yield modeling, and CIM/CAMsystems. Readers are introduced to both the theory and practice ofall basic manufacturing concepts. Following an overview of manufacturing and technology, the textexplores process monitoring methods, including those that focus onproduct wafers and those that focus on the equipment used toproduce wafers. Next, the text sets forth some fundamentals ofstatistics and yield modeling, which set the foundation for adetailed discussion of how statistical process control is used toanalyze quality and improve yields. The discussion of statistical experimental design offers readers apowerful approach for systematically varying controllable processconditions and determining their impact on output parameters thatmeasure quality. The authors introduce process modeling concepts,including several advanced process control topics such asrun-by-run, supervisory control, and process and equipmentdiagnosis. Critical coverage includes the following: * Combines process control and semiconductor manufacturing * Unique treatment of system and software technology and managementof overall manufacturing systems * Chapters include case studies, sample problems, and suggestedexercises * Instructor support includes electronic copies of the figures andan instructor's manual Graduate-level students and industrial practitioners will benefitfrom the detailed exami?nation of how electronic materials andsupplies are converted into finished integrated circuits andelectronic products in a high-volume manufacturingenvironment. An Instructor's Manual presenting detailed solutions to all theproblems in the book is available from the Wiley editorialdepartment. An Instructor Support FTP site is also available.
Download or read book Fundamental Principles of Optical Lithography written by Chris Mack and published by John Wiley & Sons. This book was released on 2011-08-10 with total page 503 pages. Available in PDF, EPUB and Kindle. Book excerpt: The fabrication of an integrated circuit requires a variety of physical and chemical processes to be performed on a semiconductor substrate. In general, these processes fall into three categories: film deposition, patterning, and semiconductor doping. Films of both conductors and insulators are used to connect and isolate transistors and their components. By creating structures of these various components millions of transistors can be built and wired together to form the complex circuitry of modern microelectronic devices. Fundamental to all of these processes is lithography, ie, the formation of three-dimensional relief images on the substrate for subsequent transfer of the pattern to the substrate. This book presents a complete theoretical and practical treatment of the topic of lithography for both students and researchers. It comprises ten detailed chapters plus three appendices with problems provided at the end of each chapter. Additional Information: Visiting http://www.lithoguru.com/textbook/index.html enhances the reader's understanding as the website supplies information on how you can download a free laboratory manual, Optical Lithography Modelling with MATLAB®, to accompany the textbook. You can also contact the author and find help for instructors.
Download or read book Semiconductor Manufacturing Handbook written by Hwaiyu Geng and published by McGraw Hill Professional. This book was released on 2005-05-18 with total page 915 pages. Available in PDF, EPUB and Kindle. Book excerpt: WORLD-CLASS SEMICONDUCTOR MANUFACTURING EXPERTISE AT YOUR FINGERTIPS This is a comprehensive reference to the semiconductor manufacturing process and ancillary facilities -- from raw material preparation to packaging and testing, applying basics to emerging technologies. Readers charged with optimizing the design and performance of manufacturing processes will find all the information necessary to produce the highest quality chips at the lowest price in the shortest time possible. The Semiconductor Manufacturing Handbook provides leading-edge information on semiconductor wafer processes, MEMS, nanotechnology, and FPD, plus the latest manufacturing and automation technologies, including: Yield Management Automated Material Handling System Fab and Cleanroom Design and Operation Gas Abatement and Waste Treatment Management And much more Written by 60 international experts, and peer reviewed by a seasoned advisory board, this handbook covers the fundamentals of relevant technology and its real-life application and operational considerations for planning, implementing, and controlling manufacturing processes. It includes hundreds of detailed illustrations and a list of relevant books, technical papers, and websites for further research. This inclusive, wide-ranging coverage makes the Semiconductor Manufacturing Handbook the most comprehensive single-volume reference ever published in the field. STATE-OF-THE-ART SEMICONDUCTOR TECHNOLOGIES AND MANUFACTURING PROCESSES: SEMICONDUCTOR FUNDAMENTALS How Chips Are Designed and Made * Substrates * Copper and Low-k Dielectrics * Silicide Formation * Plasma * Vacuum * Photomask WAFER PROCESSING TECHNOLOGIES Microlithography * Ion Implantation * Etch * PVD/ALD * CVD * ECD * Epitaxy * CMP * Wet Cleaning FINAL MANUFACTURING Packaging * Grinding, Stress Relief, Dicing * Inspection, Measurement, and Testing NANOTECHNOLOGY, MEMS, AND FPD GAS AND CHEMICALS Specialty Gas System and DCA * Gas Abatement Systems * Chemical and Slurries Delivery System * Ultra Pure Water FAB YIELD, OPERATIONS, AND FACILITIES Yield Management * Automated Materials Handling System * Metrology * Six Sigma * Advanced Process Control * EHS * Fab Design and Construction * Cleanroom * Vibration and Acoustic Control * ESD * Airborne Molecular Control * Particle Monitoring * Wastewater Neutralization Systems
Download or read book Fabrication Engineering at the Micro and Nanoscale written by Stephen A. Campbell and published by OUP USA. This book was released on 2008-01-10 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designed for advanced undergraduate or first-year graduate courses in semiconductor or microelectronic fabrication, the third edition of Fabrication Engineering at the Micro and Nanoscale provides a thorough and accessible introduction to all fields of micro and nano fabrication.
Download or read book Ire Bonding in Microelectronics written by George G. Harman and published by McGraw Hill Professional. This book was released on 1997 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first edition of this work is considered a classic reference in the field. This new edition updates the entire work and adds 100 pages of information covering new materials and techniques such as fine pitch
Download or read book Microcosm written by George Gilder and published by Simon and Schuster. This book was released on 1990-07-15 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: From Simon & Schuster, Microcosm is the provocative national bestseller by the author of Wealth and Poverty. George Gilder's Microcosm is the crystal ball of the next technological era. Leading scientists, engineers, and entrepreneurs provide vivid accounts of the latest inventions, revealing how the new international balance of power really lies in information technology.
Download or read book Semiconductor Advanced Packaging written by John H. Lau and published by Springer Nature. This book was released on 2021-05-17 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book focuses on the design, materials, process, fabrication, and reliability of advanced semiconductor packaging components and systems. Both principles and engineering practice have been addressed, with more weight placed on engineering practice. This is achieved by providing in-depth study on a number of major topics such as system-in-package, fan-in wafer/panel-level chip-scale packages, fan-out wafer/panel-level packaging, 2D, 2.1D, 2.3D, 2.5D, and 3D IC integration, chiplets packaging, chip-to-wafer bonding, wafer-to-wafer bonding, hybrid bonding, and dielectric materials for high speed and frequency. The book can benefit researchers, engineers, and graduate students in fields of electrical engineering, mechanical engineering, materials sciences, and industry engineering, etc.
Download or read book Photonic Crystals written by John D. Joannopoulos and published by Princeton University Press. This book was released on 2011-10-30 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since it was first published in 1995, Photonic Crystals has remained the definitive text for both undergraduates and researchers on photonic band-gap materials and their use in controlling the propagation of light. This newly expanded and revised edition covers the latest developments in the field, providing the most up-to-date, concise, and comprehensive book available on these novel materials and their applications. Starting from Maxwell's equations and Fourier analysis, the authors develop the theoretical tools of photonics using principles of linear algebra and symmetry, emphasizing analogies with traditional solid-state physics and quantum theory. They then investigate the unique phenomena that take place within photonic crystals at defect sites and surfaces, from one to three dimensions. This new edition includes entirely new chapters describing important hybrid structures that use band gaps or periodicity only in some directions: periodic waveguides, photonic-crystal slabs, and photonic-crystal fibers. The authors demonstrate how the capabilities of photonic crystals to localize light can be put to work in devices such as filters and splitters. A new appendix provides an overview of computational methods for electromagnetism. Existing chapters have been considerably updated and expanded to include many new three-dimensional photonic crystals, an extensive tutorial on device design using temporal coupled-mode theory, discussions of diffraction and refraction at crystal interfaces, and more. Richly illustrated and accessibly written, Photonic Crystals is an indispensable resource for students and researchers. Extensively revised and expanded Features improved graphics throughout Includes new chapters on photonic-crystal fibers and combined index-and band-gap-guiding Provides an introduction to coupled-mode theory as a powerful tool for device design Covers many new topics, including omnidirectional reflection, anomalous refraction and diffraction, computational photonics, and much more.
Download or read book Digital Integrated Circuit Design written by Hubert Kaeslin and published by Cambridge University Press. This book was released on 2008-04-28 with total page 878 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical, tool-independent guide to designing digital circuits takes a unique, top-down approach, reflecting the nature of the design process in industry. Starting with architecture design, the book comprehensively explains the why and how of digital circuit design, using the physics designers need to know, and no more.
Download or read book Ethics for the Information Age written by Michael Jay Quinn and published by Addison Wesley Publishing Company. This book was released on 2006 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt: Widely praised for its balanced treatment of computer ethics, Ethics for the Information Age offers a modern presentation of the moral controversies surrounding information technology. Topics such as privacy and intellectual property are explored through multiple ethical theories, encouraging readers to think critically about these issues and to make their own ethical decisions.
Download or read book The Essential Guide to Semiconductors written by James L. Turley and published by Prentice Hall Professional. This book was released on 2003 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Essential Guide to Semiconductorsis a complete guide to thebusiness and technology of semiconductor design and manufacturing.Conceptual enough for laypeople and nontechnical investors, yet detailedenough for technical professionals, Jim Turley explains exactly howsilicon chips are designed and built, illuminates key markets andopportunities, and shows how the entire industry "fits together."
Download or read book Semiconductor Packaging written by Andrea Chen and published by CRC Press. This book was released on 2016-04-19 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: In semiconductor manufacturing, understanding how various materials behave and interact is critical to making a reliable and robust semiconductor package. Semiconductor Packaging: Materials Interaction and Reliability provides a fundamental understanding of the underlying physical properties of the materials used in a semiconductor package. By tying together the disparate elements essential to a semiconductor package, the authors show how all the parts fit and work together to provide durable protection for the integrated circuit chip within as well as a means for the chip to communicate with the outside world. The text also covers packaging materials for MEMS, solar technology, and LEDs and explores future trends in semiconductor packages.
Download or read book Microprocessor Design written by Grant McFarland and published by McGraw Hill Professional. This book was released on 2010-04-23 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gain a Working Knowledge of the Entire Microprocessor Design Flow This unique step-by-step guide is a complete introduction to modern microprocessor design, explained in simple nontechnical language without complex mathematics. An ideal primer for those working in or studying the semiconductor industry, Microprocessor Design explains all the key concepts, terms, and acronyms needed to understand the steps required to design and manufacture a microprocessor. Developed from a successful corporate training course, this hands-on learning guide walks readers through every step of microprocessor design. You'll follow a new processor product from initial planning through design to production. In Microprocessor Design, the author converts his real-world design and teaching experience into an easy-to-follow reference employing an on-the-job-training approach to cover: The evolution of microprocessors Microprocessor design planning Architecture and microarchitecture Logic design and circuit design Semiconductor manufacturing Processor packaging and test This authoritative reference is an excellent introduction for students or engineers new to processor design and can show industry veterans how their specialty fits into the overall design flow. This accessible and practical guide will provide the reader with a broad working knowledge of the concepts of microprocessor design, as well as an understanding of the individual steps in the process and the jargon used by the industry.
Download or read book Nanofabrication written by Ampere A. Tseng and published by World Scientific. This book was released on 2008 with total page 583 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many of the devices and systems used in modern industry are becoming progressively smaller and have reached the nanoscale domain. Nanofabrication aims at building nanoscale structures, which can act as components, devices, or systems, in large quantities at potentially low cost. Nanofabrication is vital to all nanotechnology fields, especially for the realization of nanotechnology that involves the traditional areas across engineering and science. This is the first book solely dedicated to the manufacturing technology in nanoscale structures, devices, and systems and is designed to satisfy the growing demands of researchers, professionals, and graduate students. Both conventional and non-conventional fabrication technologies are introduced with emphasis on multidisciplinary principles, methodologies, and practical applications. While conventional technologies consider the emerging techniques developed for next generation lithography, non-conventional techniques include scanning probe microscopy lithography, self-assembly, and imprint lithography, as well as techniques specifically developed for making carbon tubes and molecular circuits and devices. Sample Chapter(s). Chapter 1: Atom, Molecule, and Nanocluster Manipulations for Nanostructure Fabrication Using Scanning Probe Microscopy (3,320 KB). Contents: Atomic Force Microscope Lithography (N Kawasegi et al.); Nanowire Assembly and Integration (Z Gu & D H Gracias); Extreme Ultraviolet Lithography (H Kinoshita); Electron Projection Lithography (T Miura et al.); Electron Beam Direct Writing (K Yamazaki); Electron Beam Induced Deposition (K Mitsuishi); Focused Ion Beams and Interaction with Solids (T Ishitani et al.); Nanofabrication of Nanoelectromechanical Systems (NEMS): Emerging Techniques (K L Ekinci & J Brugger); and other papers. Readership: Researchers, professionals, and graduate students in the fields of nanoengineering and nanoscience.
