Download or read book Microbiology and Sterility Assurance in Pharmaceuticals and Medical Devices written by and published by . This book was released on 2011 with total page 964 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Sterility Sterilisation and Sterility Assurance for Pharmaceuticals written by Tim Sandle and published by Elsevier. This book was released on 2013-10-31 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: Failure to adequately control any microbial challenge associated within process or product by robust sterilisation will result in a contaminated marketed product, with potential harm to the patient. Sterilisation is therefore of great importance to healthcare and the manufacturers of medical devices and pharmaceuticals. Sterility, sterilisation and sterility assurance for pharmaceuticals examines different means of rendering a product sterile by providing an overview of sterilisation methods including heat, radiation and filtration. The book outlines and discusses sterilisation technology and the biopharmaceutical manufacturing process, including aseptic filling, as well as aspects of the design of containers and packaging, as well as addressing the cleanroom environments in which products are prepared. Consisting of 18 chapters, the book comprehensively covers sterility, sterilisation and microorganisms; pyrogenicity and bacterial endotoxins; regulatory requirements and good manufacturing practices; and gamma radiation. Later chapters discuss e-beam; dry heat sterilisation; steam sterilisation; sterilisation by gas; vapour sterilisation; and sterile filtration, before final chapters analyse depyrogenation; cleanrooms; aseptic processing; media simulation; biological indicators; sterility testing; auditing; and new sterilisation techniques. Covers the main sterilisation methods of physical removal, physical alteration and inactivation Includes discussion of medical devices, aseptically filled products and terminally sterilised products Describes bacterial, pyrogenic, and endotoxin risks to devices and products
Download or read book Handbook of Microbiological Quality Control in Pharmaceuticals and Medical Devices written by Rosamund M. Baird and published by CRC Press. This book was released on 2000-08-17 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microbiologists working in both the pharmaceutical and medical device industries, face considerable challenges in keeping abreast of the myriad microbiological references available to them, and the continuously evolving regulatory requirements. The Handbook of Microbiological Quality Control provides a unique distillation of such material, by provi
Download or read book Assurance of Sterility for Sensitive Combination Products and Materials written by Byron Lambert and published by Academic Press. This book was released on 2019-06-15 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: Assurance of Sterility for Sensitive Combination Products and Materials: New Paradigms for the Next Generation of Medical Devices and Pharmaceuticals discusses the medical device industry and existing challenges regarding the exciting new world of sensitive combination products (SCPs) and their terminal sterilization. This book reassesses the current assumptions to assure the patient's best interests are met in the development of increasingly rigorous sterilization methods used to counteract MRSA and other 'super-bugs'. In addition, the book discusses the special challenges faced with implantable medical devices, sterilization requirements and further methods needed for material selection and the design process. This book is unique in taking a holistic, end-to-end approach to sterilization, with a particular focus on materials selection and product design. Introduces sterilization principles at the material selection and design stages Addresses the industry need for new sterilization processes for new medical devices and biomaterials Provides guidance to select the appropriate sterilization technique for newly developed sensitive combination products Examines forward thinking tactics for matching new developments in material compatibility with possible regulatory and QSR strategies
Download or read book Guide to Microbiological Control in Pharmaceuticals and Medical Devices Second Edition written by Stephen P. Denyer and published by CRC Press. This book was released on 2006-12-26 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microbiological matters continue to exercise considerable influence on product quality. In both the pharmaceutical and medical device industries, products of greater sophistication, along with evolving regulatory requirements, are elevating the challenges related to maintaining microbiological integrity. Updated to reflect technological and regulatory changes, the Guide to Microbiological Control in Pharmaceuticals and Medical Devices, Second Edition covers thoseprincipal aspects of microbiology that arerelevant to the preformulation, formulation, manufacturing, and license application stages involved with the production of pharmaceuticals and medical devices. In recognition of the diverse disciplines involved in pharmaceutical and medical device production, this work provides a brief introduction to microbiology geared towards the nonmicrobiologist. Covering good manufacturing practice in the control of contamination, the text explores quality control, the preservation of formulations, and principles of sterilization, including microbiological-specific considerations for biotechnological products and other medical devices. It also provides additional materials on package integrity and contamination risks in clean rooms. The editors have produced a companion text, the Handbook of Microbiological Quality Control in Pharmaceuticals and Medical Devices (see reverse), which when paired with the Guide offers a complete theoretical and practical treatment of microbiological control. This book provides a comprehensive distillation of information concerning methodology and regulations that would otherwise remain scattered throughout the literature. It allows scientists from many fields to address potential problems in advance and implement suitable strategies at the earliest stages of development.
Download or read book Pharmaceutical Microbiology written by Tim Sandle and published by Woodhead Publishing. This book was released on 2015-10-09 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pharmaceutical Microbiology: Essentials for Quality Assurance and Quality Control presents that latest information on protecting pharmaceutical and healthcare products from spoilage by microorganisms, and protecting patients and consumers. With both sterile and non-sterile products, the effects can range from discoloration to the potential for fatality. The book provides an overview of the function of the pharmaceutical microbiologist and what they need to know, from regulatory filing and GMP, to laboratory design and management, and compendia tests and risk assessment tools and techniques. These key aspects are discussed through a series of dedicated chapters, with topics covering auditing, validation, data analysis, bioburden, toxins, microbial identification, culture media, and contamination control. Contains the applications of pharmaceutical microbiology in sterile and non-sterile products Presents the practical aspects of pharmaceutical microbiology testing Provides contamination control risks and remediation strategies, along with rapid microbiological methods Includes bioburden, endotoxin, and specific microbial risks Highlights relevant case studies and risk assessment scenarios
Download or read book Pharmaceutical Microbiology Manual written by United States Food and Drug Administration and published by Createspace Independent Publishing Platform. This book was released on 2017-09-21 with total page 92 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manual and is a supplement to the United States Pharmacopeia (USP) for pharmaceutical microbiology testing, including antimicrobial effectiveness testing, microbial examination of non-sterile products, sterility testing, bacterial endotoxin testing, particulate matter, device bioburden and environmental monitoring testing. The goal of this manual is to provide an ORA/CDER harmonized framework on the knowledge, methods and tools needed, and to apply the appropriate scientific standards required to assess the safety and efficacy of medical products within FDA testing laboratories. The PMM has expanded to include some rapid screening techniques along with a new section that covers inspectional guidance for microbiologists that conduct team inspections. This manual was developed by members of the Pharmaceutical Microbiology Workgroup and includes individuals with specialized experience and training. The instructions in this document are guidelines for FDA analysts. When available, analysts should use procedures and worksheets that are standardized and harmonized across all ORA field labs, along with the PMM, when performing analyses related to product testing of pharmaceuticals and medical devices. When changes or deviations are necessary, documentation should be completed per the laboratory's Quality Management System. Generally, these changes should originate from situations such as new products, unusual products, or unique situations. This manual was written to reduce compendia method ambiguity and increase standardization between FDA field laboratories. By providing clearer instructions to FDA ORA labs, greater transparency can be provided to both industry and the public. However, it should be emphasized that this manual is a supplement, and does not replace any information in USP or applicable FDA official guidance references. The PMM does not relieve any person or laboratory from the responsibility of ensuring that the methods being employed from the manual are fit for use, and that all testing is validated and/or verified by the user. The PMM will continually be revised as newer products, platforms and technologies emerge or any significant scientific gaps are identified with product testing. Reference to any commercial materials, equipment, or process in the PMM does not in any way constitute approval, endorsement, or recommendation by the U.S. Food and Drug Administration.
Download or read book Sterilization of Medical Devices written by Anne Booth and published by Routledge. This book was released on 2018-12-12 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents vital information on international sterilization standards and guidance on practical application of these standards in the manufacturing process. It covers validation, industrial sterilization methods, emerging sterilization techniques, laboratory testing, manufacturing of sterile devices, and device reuse. Excerpted from The Validator, edited by Anne F. Booth, more than fifty experts share their knowledge of current technologies in easy-to-understand articles that establish methods to ensure compliance. Contents include reviews of ISO sterilization standards, industrial sterilization methods and technologies, and support testing methodologies.
Download or read book Biocontamination Control for Pharmaceuticals and Healthcare written by Tim Sandle and published by Elsevier. This book was released on 2024-02-09 with total page 510 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biocontamination Control for Pharmaceuticals and Healthcare outlines a biocontamination strategy that tracks bio-burden control and reduction at each transition in classified areas of a facility. The first edition of the book covered many of the aspects of the strategy, but the new official guidance signals that a roadmap is required to fully comply with its requirements. Completely updated with the newest version of the EU-GPM (EN17141) the new edition expands the coverage of quality risk management and new complete examples to help professionals bridge the gap between regulation and implementation. Biocontamination Control for Pharmaceuticals and Healthcare offers professionals in pharma quality control and related areas guidance on building a complete biocontamination strategy. Includes the most current regulations Contains three new chapters, including Application of Quality Risk Management and its Application in Biocontamination Control, Designing an Environmental Monitoring Programme, and Synthesis: An Anatomy of a Contamination Control Strategy Offers practical guidance on building a complete biocontamination strategy
Download or read book Pharmaceutical Microbiological Quality Assurance and Control written by David Roesti and published by John Wiley & Sons. This book was released on 2020-01-02 with total page 594 pages. Available in PDF, EPUB and Kindle. Book excerpt: Relying on practical examples from the authors’ experience, this book provides a thorough and modern approach to controlling and monitoring microbial contaminations during the manufacturing of non-sterile pharmaceuticals. Offers a comprehensive guidance for non-sterile pharmaceuticals microbiological QA/QC Presents the latest developments in both regulatory expectations and technical advancements Provides guidance on statistical tools for risk assessment and trending of microbiological data Describes strategy and practical examples from the authors’ experience in globalized pharmaceutical companies and expert networks Offers a comprehensive guidance for non-sterile pharmaceuticals microbiological QA/QC Presents the latest developments in both regulatory expectations and technical advancements Provides guidance on statistical tools for risk assessment and trending of microbiological data Describes strategy and practical examples from the authors’ experience in globalized pharmaceutical companies and expert networks
Download or read book Bacteriological Analytical Manual written by United States. Food and Drug Administration. Division of Microbiology and published by . This book was released on 1969 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Guideline on Sterile Drug Products Produced by Aseptic Processing written by Center for Drugs and Biologics (U.S.) and published by . This book was released on 1987 with total page 48 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Hugo and Russell s Pharmaceutical Microbiology written by Brendan F. Gilmore and published by John Wiley & Sons. This book was released on 2023-01-05 with total page 580 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hugo & Russell’s Pharmaceutical Microbiology Discover the very latest developments in pharmaceutical microbiology in the 9th edition of this popular textbook Microbiology is one of the essential pharmaceutical sciences upon which the study and practice of pharmacy is built. It has a bearing on all aspects of the manufacture of medicines and sterile products, from their design and development to their delivery as quality products. Few interventions are more central to modern medicine than the treatment of infection, where antibiosis, vaccination and hygienic practices have essential roles to play. The COVID-19 pandemic, the appearance of new pathogens and the rise of antibiotic resistance have demonstrated most completely the need for pharmaceutical practitioners, researchers and industrial scientists to be fully conversant with this field. The 9th edition of Hugo and Russell’s Pharmaceutical Microbiology has been updated to meet this need. Having long served as the sole comprehensive textbook covering this subject, it has now been adapted to a critical new period in the advancement of medical and pharmaceutical research and development. Its experienced editors have incorporated contributions from subject experts and created a text which will serve the next generation of pharmacy students, pharmaceutical industry scientists and researchers. In this ninth edition of Hugo and Russell’s Pharmaceutical Microbiology, readers will find: A mix of established and new authors bringing practical and research experience to their chapters Material covering the fundamentals of microbiology, microbial behavior and laboratory investigation Revised chapters incorporating new material on microbe-host interactions, antibiotic resistance, emerging pathogens, public health microbiology, healthcare-associated infection and pharmaceutical manufacture Emerging understandings from the COVID-19 pandemic on infection prevention and control and vaccine development Practitioners providing their insights on clinical practice and pharmaceutical production An accompanying website incorporating teaching resources Hugo and Russell’s Pharmaceutical Microbiology, 9th edition promises to remain the essential text for pharmacy and medical students, as well as researchers and industry professionals.
Download or read book Microbial Contamination Control in the Pharmaceutical Industry written by Luis Jimenez and published by CRC Press. This book was released on 2019-10-17 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: This authoritative reference presents an up-to-date review of the testing methods, emerging technologies, and analytical systems and procedures used to prevent the microbial contamination of pharmaceutical processes, products, and environments. It identifies new tools for sample analysis and evaluation and the impact of these advancements on the continuous supply and manufacturing of pharmaceutical products. With more than 100 tables and 430 current references, the book contains a detailed analysis of microbial contamination recalls for nonsterile and sterile pharmaceutical products, demonstrating the distribution of microorganisms worldwide and the identification by geographical regions.
Download or read book The CDC Handbook A Guide to Cleaning and Disinfecting Clean Rooms written by Dr. Tim Sandle and published by Grosvenor House Publishing. This book was released on 2012-08-02 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Cleaning and Disinfection handbook is aimed at those working within the pharmaceutical and healthcare sectors around the world, as well as providing valuable information for students and for the general reader. The book provides comprehensive detail on different types of disinfectants and their modes of action; explains the problems of microbial destruction and resistance; introduces cleaning techniques and the latest safety regulations; expounds upon the application of cleaning within healthcare and pharmaceutical environments, noting current national and international standards. The book also provides guidance on disinfectant efficacy testing. Assembled by expert practitioners, the book balances theoretical concepts with sound practical advice, and is likely to become the definitive text on keeping contamination in control within clean areas and controlled environments. With this second edition, the book is fully updated in line with the latest standards and regulations.
Download or read book Quality Assurance of Aseptic Preparation Services written by Alison M. Beaney and published by . This book was released on 2016 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Quality Assurance of Aseptic Preparation Services Standards Handbook (also known as the Yellow Guide) provides standards for unlicensed aseptic preparation in the UK, as well as practical information to aid implementation of the standards. The handbook delivers essential standards in a practical way and in a format that will be useful for pharmacy management, staff working in aseptic preparation units and those whose role it is to audit the services. The accompanying support resources help with understanding the complexities of relevant topics including microbiology, radiopharmaceuticals, advanced therapy medicinal products, technical (quality) agreements and capacity planning. All the standards have been revised and updated for this 5th edition. The text is produced on behalf of the Royal Pharmaceutical Society (RPS) and the NHS Pharmaceutical Quality Assurance Committee. New in this edition: Replaces the 4th edition standards and forms the basis for an ongoing audit program in the NHS Many new and revised standards Greater emphasis on Pharmaceutical Quality Systems; the responsibilities of pharmacy management, Chief Pharmacists (or equivalent), has been expanded in line with developments in Good Manufacturing Practice Reformatted into 2 parts: standards and support resources. This is a new collaboration between the RPS and NHS. Since the previous edition the RPS has become the professional body for pharmacists and pharmaceutical scientists. RPS launched these standards as part of a library of professional standards and a programme of work to create standards for all areas of pharmacy. The Handbook is essential for pharmacists, hospital pharmacy management and technical services teams, and auditors of unlicensed NHS hospital pharmacy aseptic preparation services in the UK, pharmacists and regulators. The text is used to inform standards used in several other countries.
Download or read book Validation of Pharmaceutical Processes written by James P. Agalloco and published by CRC Press. This book was released on 2007-09-25 with total page 762 pages. Available in PDF, EPUB and Kindle. Book excerpt: Completely revised and updated to reflect the significant advances in pharmaceutical production and regulatory expectations, this third edition of Validation of Pharmaceutical Processes examines and blueprints every step of the validation process needed to remain compliant and competitive. The many chapters added to the prior compilation examine va
