Download or read book Micro scale Investigation of Filtration Velocity and Particulate Matter Characteristics Effects on Diesel Particulate Filter Wall Loading written by Renato A. Yapaulo and published by . This book was released on 2009 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Diesel Particulate Filter Technology written by Timothy V Johnson and published by SAE International. This book was released on 2007-03-28 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: Until recently, the complexity of the Diesel Particulate Filter (DPF) system has hindered its commercial success. Stringent regulations of diesel emissions has lead to advancements in this technology, therefore mainstreaming the use of DPFs in light- and heavy-duty diesel filtration applications. This book covers the latest and most important research in DPF systems, focusing mainly on the advancements of the years 2002-2006. Editor Timothy V. Johnson selected the top 29 SAE papers covering the most significant research in this technology.
Download or read book Annual Index abstracts of SAE Technical Papers written by and published by . This book was released on 2006 with total page 1000 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Annual Index abstracts of SAE Technical Papers 2004 written by and published by . This book was released on 2005 with total page 962 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Ceramic Armor Bioceramics and Porous Materials Volume 37 Issue 4 written by Jerry C. LaSalvia and published by John Wiley & Sons. This book was released on 2017-01-04 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: A collection of 17 papers from thee popular symposia - Symposium 4: Armor Ceramics; Symposium 5: Next Generation Bioceramics and Biocomposites; and Symposium 9: Porous Ceramics: Novel Developments and Applications held during The American Ceramic Society’s 40th International Conference on Advanced Ceramics and Composites, held in Daytona Beach, Florida, January 24-29, 2016.
Download or read book Introduction to Permanent Plug and Abandonment of Wells written by Mahmoud Khalifeh and published by Springer Nature. This book was released on 2020-01-27 with total page 285 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book offers a timely guide to challenges and current practices to permanently plug and abandon hydrocarbon wells. With a focus on offshore North Sea, it analyzes the process of plug and abandonment of hydrocarbon wells through the establishment of permanent well barriers. It provides the reader with extensive knowledge on the type of barriers, their functioning and verification. It then discusses plug and abandonment methodologies, analyzing different types of permanent plugging materials. Last, it describes some tests for verifying the integrity and functionality of installed permanent barriers. The book offers a comprehensive reference guide to well plugging and abandonment (P&A) and well integrity testing. The book also presents new technologies that have been proposed to be used in plugging and abandoning of wells, which might be game-changing technologies, but they are still in laboratory or testing level. Given its scope, it addresses students and researchers in both academia and industry. It also provides information for engineers who work in petroleum industry and should be familiarized with P&A of hydrocarbon wells to reduce the time of P&A by considering it during well planning and construction.
Download or read book Urea SCR Technology for deNOx After Treatment of Diesel Exhausts written by Isabella Nova and published by Springer Science & Business Media. This book was released on 2014-03-14 with total page 715 pages. Available in PDF, EPUB and Kindle. Book excerpt: Urea-SCR Technology for deNOx After Treatment of Diesel Exhausts presents a complete overview of the selective catalytic reduction of NOx by ammonia/urea. The book starts with an illustration of the technology in the framework of the current context (legislation, market, system configurations), covers the fundamental aspects of the SCR process (catalysts, chemistry, mechanism, kinetics) and analyzes its application to useful topics such as modeling of full scale monolith catalysts, control aspects, ammonia injections systems and integration with other devices for combined removal of pollutants.
Download or read book Design and Development of Heavy Duty Diesel Engines written by P. A. Lakshminarayanan and published by Springer Nature. This book was released on 2019-11-05 with total page 912 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended to serve as a comprehensive reference on the design and development of diesel engines. It talks about combustion and gas exchange processes with important references to emissions and fuel consumption and descriptions of the design of various parts of an engine, its coolants and lubricants, and emission control and optimization techniques. Some of the topics covered are turbocharging and supercharging, noise and vibrational control, emission and combustion control, and the future of heavy duty diesel engines. This volume will be of interest to researchers and professionals working in this area.
Download or read book Chemical Abstracts written by and published by . This book was released on 2002 with total page 2710 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the International Petroleum and Petrochemical Technology Conference 2019 written by Jia'en Lin and published by Springer Nature. This book was released on 2019-12-16 with total page 501 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a compilation of selected papers from the 3rd International Petroleum and Petrochemical Technology Conference (IPPTC 2019). The work focuses on petroleum & petrochemical technologies and practical challenges in the field. It creates a platform to bridge the knowledge gap between China and the world. The conference not only provides a platform to exchanges experience but also promotes the development of scientific research in petroleum & petrochemical technologies. The book will benefit a broad readership, including industry experts, researchers, educators, senior engineers and managers.
Download or read book Engine Exhaust Particulates written by Avinash Kumar Agarwal and published by Springer. This book was released on 2018-11-01 with total page 269 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comparative analysis of both diesel and gasoline engine particulates, and also of the emissions resulting from the use of alternative fuels. Written by respected experts, it offers comprehensive insights into motor vehicle particulates, their formation, composition, location, measurement, characterisation and toxicology. It also addresses exhaust-gas treatment and legal, measurement-related and technological advancements concerning emissions. The book will serve as a valuable resource for academic researchers and professional automotive engineers alike.
Download or read book Negative Emissions Technologies and Reliable Sequestration written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2019-04-08 with total page 511 pages. Available in PDF, EPUB and Kindle. Book excerpt: To achieve goals for climate and economic growth, "negative emissions technologies" (NETs) that remove and sequester carbon dioxide from the air will need to play a significant role in mitigating climate change. Unlike carbon capture and storage technologies that remove carbon dioxide emissions directly from large point sources such as coal power plants, NETs remove carbon dioxide directly from the atmosphere or enhance natural carbon sinks. Storing the carbon dioxide from NETs has the same impact on the atmosphere and climate as simultaneously preventing an equal amount of carbon dioxide from being emitted. Recent analyses found that deploying NETs may be less expensive and less disruptive than reducing some emissions, such as a substantial portion of agricultural and land-use emissions and some transportation emissions. In 2015, the National Academies published Climate Intervention: Carbon Dioxide Removal and Reliable Sequestration, which described and initially assessed NETs and sequestration technologies. This report acknowledged the relative paucity of research on NETs and recommended development of a research agenda that covers all aspects of NETs from fundamental science to full-scale deployment. To address this need, Negative Emissions Technologies and Reliable Sequestration: A Research Agenda assesses the benefits, risks, and "sustainable scale potential" for NETs and sequestration. This report also defines the essential components of a research and development program, including its estimated costs and potential impact.
Download or read book Aerosol Filtration written by Dominique Thomas and published by Elsevier. This book was released on 2016-11-30 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: Filtration of aerosols is omnipresent in our daily lives, in areas as diverse as health, the protection of people and the environment, and air treatment inside buildings. However, the collection of particles within a filter media is not, contrary to popular belief, linked to a simple screen effect. The phenomena involved are much more complex and require the consideration of aerosol interactions, filter media and process conditions to select the best fiber filter for a given application. Aerosol Filtration, book for students, hygiene or process engineers, fibrous media manufacturers, designers, and filtration system suppliers or users addresses the filtration of aerosols in six chapters. These chapters cover physics and aerosol characterization, the fibrous media, and efficiency and filter clogging by solid or liquid aerosols, with special attention to the filtration of the nanoparticles. - Analyses the behavior of fibrous media against solid and liquid aerosols - Presents models of efficiency and pressure drop - Introduces computing elements for estimating the lifetime of filters - Provides guidance for designing filters and predicting their behavior over time
Download or read book Nanotechnology Research Directions IWGN Workshop Report written by R.S. Williams and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 367 pages. Available in PDF, EPUB and Kindle. Book excerpt: energy production, environmental management, transportation, communication, computation, and education. As the twenty-first century unfolds, nanotechnology's impact on the health, wealth, and security of the world's people is expected to be at least as significant as the combined influences in this century of antibiotics, the integrated circuit, and human-made polymers. Dr. Neal Lane, Advisor to the President for Science and Technology and former National Science Foundation (NSF) director, stated at a Congressional hearing in April 1998, "If I were asked for an area of science and engineering that will most likely produce the breakthroughs of tomorrow, I would point to nanoscale science and engineering. " Recognizing this potential, the White House Office of Science and Technology Policy (OSTP) and the Office of Management and Budget (OMB) have issued a joint memorandum to Federal agency heads that identifies nanotechnology as a research priority area for Federal investment in fiscal year 2001. This report charts "Nanotechnology Research Directions," as developed by the Interagency W orking Group on Nano Science, Engineering, and Technology (IWGN) of the National Science and Technology Council (NSTC). The report incorporates the views of leading experts from government, academia, and the private sector. It reflects the consensus reached at an IWGN-sponsored workshop held on January 27-29, 1999, and detailed in contributions submitted thereafter by members of the V. S. science and engineering community. (See Appendix A for a list of contributors.
Download or read book Renewable Energy Sources and Climate Change Mitigation written by Ottmar Edenhofer and published by Cambridge University Press. This book was released on 2011-11-21 with total page 1088 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Intergovernmental Panel on Climate Change Special Report (IPCC-SRREN) assesses the potential role of renewable energy in the mitigation of climate change. It covers the six most important renewable energy sources - bioenergy, solar, geothermal, hydropower, ocean and wind energy - as well as their integration into present and future energy systems. It considers the environmental and social consequences associated with the deployment of these technologies, and presents strategies to overcome technical as well as non-technical obstacles to their application and diffusion. SRREN brings a broad spectrum of technology-specific experts together with scientists studying energy systems as a whole. Prepared following strict IPCC procedures, it presents an impartial assessment of the current state of knowledge: it is policy relevant but not policy prescriptive. SRREN is an invaluable assessment of the potential role of renewable energy for the mitigation of climate change for policymakers, the private sector, and academic researchers.
Download or read book Porous Ceramic Materials written by Dean Mo Liu and published by Trans Tech Publications Ltd. This book was released on 1995-09-26 with total page 243 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fabrication, Characterization, Applications
Download or read book Recent Progress in Slow Sand and Alternative Biofiltration Processes written by Rolf Gimbel and published by IWA Publishing. This book was released on 2006-03-31 with total page 580 pages. Available in PDF, EPUB and Kindle. Book excerpt: Slow sand filtration is typically cited as being the first "engineered" process in drinking-water treatment. Proven modifications to the conventional slow sand filtration process, the awareness of induced biological activity in riverbank filtration systems, and the growth of oxidant-induced biological removals in more rapid-rate filters (e.g. biological activated carbon) demonstrate the renaissance of biofiltration as a treatment process that remains viable for both small, rural communities and major cities. Biofiltration is expected to become even more common in the future as efforts intensify to decrease the presence of disease-causing microorganisms and disinfection by-products in drinking water, to minimize microbial regrowth potential in distribution systems, and where operator skill levels are emphasized. Recent Progress in Slow Sand and Alternative Biofiltration Processes provides a state-of-the-art assessment on a variety of biofiltration systems from studies conducted around the world. The authors collectively represent a perspective from 23 countries and include academics, biofiltration system users, designers, and manufacturers. It provides an up-to-date perspective on the physical, chemical, biological, and operational factors affecting the performance of slow sand filtration (SSF), riverbank filtration (RBF), soil-aquifer treatment (SAT), and biological activated carbon (BAC) processes. The main themes are: comparable overviews of biofiltration systems; slow sand filtration process behavior, treatment performance and process developments; and alternative biofiltration process behaviors, treatment performances, and process developments.
