Download or read book Micro Electro Discharge Machining written by Ajay M. Sidpara and published by CRC Press. This book was released on 2019-08-20 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micro Electro Discharge Machining (EDM) is a prominent technology for the fabrication of micro components in many fields. Nowadays, it is used like a conventional machine tool due to favorable characteristics. This book provides the fundamental knowledge of the principles of the process and its variants, the different process parameters, the role of machine components and systems, the challenges, and how to eliminate processing errors. It also includes real life applications of micro EDM in different areas with the most relevant examples.

Download or read book Micro Electro Discharge Machining written by Irene Fassi and published by . This book was released on 2021-10-25 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micro electrical discharge machining (micro-EDM) is a thermo-electric and contactless process most suited for micro-manufacturing and high-precision machining, especially when difficult-to-cut materials, such as super alloys, composites, and electro conductive ceramics, are processed. Many industrial domains exploit this technology to fabricate highly demanding components, such as high-aspect-ratio micro holes for fuel injectors, high-precision molds, and biomedical parts. Moreover, the continuous trend towards miniaturization and high precision functional components boosted the development of control strategies and optimization methodologies specifically suited to address the challenges in micro- and nano-scale fabrication. This Special Issue showcases 12 research papers and a review article focusing on novel methodological developments on several aspects of micro electrical discharge machining: machinability studies of hard materials (TiNi shape memory alloys, Si3N4-TiN ceramic composite, ZrB2-based ceramics reinforced with SiC fibers and whiskers, tungsten-cemented carbide, Ti-6Al-4V alloy, duplex stainless steel, and cubic boron nitride), process optimization adopting different dielectrics or electrodes, characterization of mechanical performance of processed surface, process analysis, and optimization via discharge pulse-type discrimination, hybrid processes, fabrication of molds for inflatable so���� microactuators, and implementation of low-cost desktop micro- EDM system.

Download or read book Micro electrical Discharge Machining Processes written by Golam Kibria and published by Springer. This book was released on 2019-02-04 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a comprehensive collection of micro electrical discharge machining (EDM) processes, including hybrid processes. It discusses the theory behind each process and their applications in various technological as well as biomedical domains, and also presents a brief background to various micro EDM processes, current research challenges, and detailed case studies of micro-manufacturing miniaturized parts. The book serves as a valuable guide for students and researchers interested in micro EDM and other related processes.

Download or read book Micro Electro Discharge Machining written by Ajay M. Sidpara and published by CRC Press. This book was released on 2019-08-20 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micro Electro Discharge Machining (EDM) is a prominent technology for the fabrication of micro components in many fields. Nowadays, it is used like a conventional machine tool due to favorable characteristics. This book provides the fundamental knowledge of the principles of the process and its variants, the different process parameters, the role of machine components and systems, the challenges, and how to eliminate processing errors. It also includes real life applications of micro EDM in different areas with the most relevant examples.

Download or read book Electrical Discharge Machining EDM written by M. P. Jahan and published by Nova Science Publishers. This book was released on 2015 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electrical Discharge Machining (EDM) is one of the earliest and most widely used non-conventional machining processes. In recent years, the use of EDM has increased significantly in industries, mainly due to the extensive use of hard and difficult-to-cut materials, i.e. hardened steels, carbides, titanium alloys, nickel super alloys and so on. The EDM process is being used extensively for many important applications in die and mold, aerospace, automotive, micro-electronic and biomedical industries. As a result, extensive research has been carried out on various aspects of EDM. Taking those facts into consideration, this book aims to provide a comprehensive overview of the various types, technologies and applications of EDM. The book starts with chapters on the two major types of EDM: die-sinking EDM and wire-EDM. Subsequently, several EDM-based hybrid machining processes, such as: ultrasonically aided EDM, powder-mixed EDM, and simultanous micro-EDM/ECM have been discussed in detail. This book includes chapters on the detail of EDM surface and modeling and simulation of the EDM process. This book also contains chapters on the novel and innovative applications of EDM as well as machining of newer materials, such as: shape memory alloy, reaction-bonded silicon carbide, metal metrix composites, silicon based semiconductors, and non-conducting polymers. It is a useful resource for students and researchers who are planning to start their research on the area of EDM and related processes. It can also serve as a reference for students, academics, researchers, engineers, and working professionals in non-traditional manufacturing processes related industries.

Download or read book Micromachining Using Electrochemical Discharge Phenomenon written by Rolf Wuthrich and published by William Andrew. This book was released on 2014-11-08 with total page 219 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micro-machining is an advanced manufacturing technique of growing importance, and adoption of micro-machining using electrochemical discharges (Micro-ECDM) has increased steadily in recent years. Among new developments is the interest of industry in Micro-ECDM. However, the potential of the technology is not being fully utilized and there is no comprehensive reference book available today covering it. Micromachining Using Electrochemical Discharge Phenomenon, Second Edition fills this gap. It is unique in its detailed coverage of all aspects of the Micro-ECDM process, as well as Spark Assisted Chemical Engraving (SACE). As such, it covers technologies such as chemical etching, micro-drilling, and other material removal mechanisms, high aspect ratio machining, design and construction of the machining apparatus, and a wide range of applications. The new edition compares Micro-ECDM and SACE with other micromachining technologies such as laser machining and traditional EDM. ECDM is used for machining of electrically non-conductive materials. Micro-ECDM/SACE is mainly applied to glass and the book focuses on glass, but the authors also present new results on other materials such as ceramics. In addition, techniques to modify material properties for the machining process are explained. The authors discuss machining strategies including the latest developments in micro-texturing of glass micro-channels and reports on developments in controlling and analysis aspects of machining. This book is a unique reference for engineers and industrial researchers involved in development, design and use of micromachining, chemical micro-drilling or chemical engraving techniques and equipment. Only all-encompassing reference coving Micro-ECDM and SACE available on the market Covers a wide range of applications, including applications in the MEMS industry and the Medical Devices and Medical Diagnostics industries New edition includes expanded sections on comparing Micro-ECDM/SACE with other micromachining technologies

Download or read book Micro electrical Discharge Machining Processes written by Golam Kibria and published by Springer. This book was released on 2018-12-15 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a comprehensive collection of micro electrical discharge machining (EDM) processes, including hybrid processes. It discusses the theory behind each process and their applications in various technological as well as biomedical domains, and also presents a brief background to various micro EDM processes, current research challenges, and detailed case studies of micro-manufacturing miniaturized parts. The book serves as a valuable guide for students and researchers interested in micro EDM and other related processes.

Download or read book Micro Manufacturing Technologies and Their Applications written by Irene Fassi and published by Springer. This book was released on 2017-01-31 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides in-depth theoretical and practical information on recent advances in micro-manufacturing technologies and processes, covering such topics as micro-injection moulding, micro-cutting, micro-EDM, micro-assembly, micro-additive manufacturing, moulded interconnected devices, and microscale metrology. It is designed to provide complementary material for the related e-learning platform on micro-manufacturing developed within the framework of the Leonardo da Vinci project 2013-3748/542424: MIMAN-T: Micro-Manufacturing Training System for SMEs. The book is mainly addressed to technicians and prospective professionals in the sector and will serve as an easily usable tool to facilitate the translation of micro-manufacturing technologies into tangible industrial benefits. Numerous examples are included to assist readers in learning and implementing the described technologies. In addition, an individual chapter is devoted to technological foresight, addressing market analysis and business models for micro-manufacturers.

Download or read book Non traditional Micromachining Processes written by Golam Kibria and published by Springer. This book was released on 2017-03-07 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a complete coverage of micromachining processes from their basic material removal phenomena to past and recent research carried by a number of researchers worldwide. Chapters on effective utilization of material resources, improved efficiency, reliability, durability, and cost effectiveness of the products are presented. This book provides the reader with new and recent developments in the field of micromachining and microfabrication of engineering materials.

Download or read book Micro Manufacturing written by Muammer Koç and published by John Wiley & Sons. This book was released on 2011-05-06 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the first of its kind to collectively address design-based and mechanical micro-manufacturing topics in one place. It focuses on design and materials selection, as well as the manufacturing of micro-products using mechanical-based micro-manufacturing process technologies. After addressing the fundamentals and non-metallic-based micro-manufacturing processes in the semiconductor industry, it goes on to address specific metallic-based micro-manufacturing processes, such as: micro-forming, micro-machining, micro-molding, micro-laser processing, micro-layered manufacturing, micro-joining, micro-assembly and materials handling, and microEDM and ECM. The book provides an in-depth understanding of materials behavior at micro-scales and under different micro-scale processing conditions, while also including a wide variety of emerging micro-scale manufacturing issues and examples.

Download or read book Micro Electro fabrication written by Tanveer Saleh and published by Elsevier. This book was released on 2021-05-14 with total page 413 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micro Electro-fabrication outlines three major nanoscale electro-fabrication techniques, including electro-discharge machining, electrochemical machining and electrochemical deposition. Applications covered include the fabrication of nozzles for automobiles, miniature hole machining for aerospace turbine blade cooling, biomedical device fabrication, such as stents, the fabrication of microchannels for microfluidic application, the production of various MEMS devices, rapid prototyping of micro components, and nanoelectrode fabrication for scanning electron microscopy. This comprehensive book discusses the fundamental nature of the various electro-fabrication processes as well as mathematical modelling and applications. It is an important reference for materials scientists and engineers working at the nanoscale. Provides state-of-the-art research investigations on various topics of micro/nano EDM, micro LECD, micro/nano ECM and ECDM techniques Compares a variety of electro-fabrication techniques, outlining which is best in different situations Outlines a variety of modeling and optimization techniques relating to micro/nano EDM, micro LECD, micro/nano ECM and ECDM

Download or read book Machining of Metal Matrix Composites written by J. Paulo Davim and published by Springer Science & Business Media. This book was released on 2011-09-18 with total page 170 pages. Available in PDF, EPUB and Kindle. Book excerpt: Machining of Metal Matrix Composites provides the fundamentals and recent advances in the study of machining of metal matrix composites (MMCs). Each chapter is written by an international expert in this important field of research. Machining of Metal Matrix Composites gives the reader information on machining of MMCs with a special emphasis on aluminium matrix composites. Chapter 1 provides the mechanics and modelling of chip formation for traditional machining processes. Chapter 2 is dedicated to surface integrity when machining MMCs. Chapter 3 describes the machinability aspects of MMCs. Chapter 4 contains information on traditional machining processes and Chapter 5 is dedicated to the grinding of MMCs. Chapter 6 describes the dry cutting of MMCs with SiC particulate reinforcement. Finally, Chapter 7 is dedicated to computational methods and optimization in the machining of MMCs. Machining of Metal Matrix Composites can serve as a useful reference for academics, manufacturing and materials researchers, manufacturing and mechanical engineers, and professionals involved with MMC applications. It can also be used to teach modern manufacturing engineering or as a textbook for advanced undergraduate and postgraduate engineering courses in machining, manufacturing or materials.

Download or read book Handbook of Manufacturing Engineering and Technology written by Andrew Y. C. Nee and published by Springer. This book was released on 2014-10-31 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Springer Reference Work Handbook of Manufacturing Engineering and Technology provides overviews and in-depth and authoritative analyses on the basic and cutting-edge manufacturing technologies and sciences across a broad spectrum of areas. These topics are commonly encountered in industries as well as in academia. Manufacturing engineering curricula across universities are now essential topics covered in major universities worldwide.

Download or read book Trends in Manufacturing Processes written by Inderdeep Singh and published by Springer Nature. This book was released on 2019-09-10 with total page 159 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises select proceedings of the International Conference on Futuristic Trends in Materials and Manufacturing (ICFTMM 2018). The volume covers current research findings in conventional and non-conventional manufacturing processes. Different fabrication processes of polymer based materials and advanced materials are discussed in this book. In addition, the book also discusses computer based manufacturing processes, and sustainable and green manufacturing technologies. The contents of this book will be useful for students, academicians, and researchers working in the field of manufacturing related fields.

Download or read book Advances in Unconventional Machining and Composites written by M. S. Shunmugam and published by Springer Nature. This book was released on 2019-11-22 with total page 766 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents research papers on unconventional machining (also known as non-traditional machining and advanced manufacturing) and composites which were presented during the 7th International and 28th All India Manufacturing Technology, Design and Research conference 2018 (AIMTDR 2018). The volume discusses improvements on well-established unconventional machining processes and novel or hybrid machining processes as well as properties, fabrication techniques and machining of composite materials. This volume will be of interest to academicians, researchers, and practicing engineers alike.

Download or read book Non Conventional Machining in Modern Manufacturing Systems written by Kumar, Kaushik and published by IGI Global. This book was released on 2018-09-21 with total page 303 pages. Available in PDF, EPUB and Kindle. Book excerpt: Continuous improvements in machining practices have created opportunities for businesses to develop more streamlined processes. This not only leads to higher success in day-to-day production, but also increases the overall success of businesses. Non-Conventional Machining in Modern Manufacturing Systems provides emerging research exploring the theoretical and practical aspects of technological advancements in industrial environments and applications in manufacturing. Featuring coverage on a broad range of topics such as optimization techniques, electrical discharge machining, and hot machining, this book is ideally designed for business managers, engineers, business professionals, researchers, and academicians seeking current research on non-conventional and technologically advanced machining processes.

Download or read book Servo Scanning 3D Micro Electro Discharge Machining written by Hao Tong and published by Springer Nature. This book was released on 2022-06-21 with total page 237 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides the systematic knowledge of a novel process of servo scanning 3D micro-electro-discharge machining (SS-3D micro-EDM), covering principles, methods, technologies, and optimization for machining 3D microstructures of conductive materials. The content emphasizes the systematic knowledge as well as the frontier research progress of SS-3D micro-EDM, allowing it to be used as a reference handbook for planning the whole machining process of 3D microstructures, for designing machining systems or machine tools, and even for understanding the ideas of innovative processes. The processes and the machine tools of SS-3D micro-EDM have promising applications in multi-fields for machining micro-devices or microstructures made of melt and metal alloy materials. The included methods and technologies are verified by testing and machining experiments. Thus, this book presents many machining examples, including the experimental parameters, conditions, and systems. These help the readers understand the concepts, theories, and methods easily and provide practical operation guidance for engineering applications in industrial machining processes and machine tools.