Download or read book Micro and Nano Machining of Engineering Materials written by Kaushik Kumar and published by Springer. This book was released on 2018-09-26 with total page 155 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the recent developments in the production of micro and nano size products, which cater to the needs of the industry. The processes to produce the miniature sized products with unique characteristics are addressed. Moreover, their application in areas such as micro-engines, micro-heat exchangers, micro-pumps, micro-channels, printing heads and medical implants are also highlighted. The book presents such microsystem-based products as important contributors to a sustainable economy. The recent research in this book focuses on the development of new micro and nano manufacturing platforms while integrating the different technologies to manufacture the micro and nano components in a high throughput and cost effective manner. The chapters contain original theoretical and applied research in the areas of micro- and nano-manufacturing that are related to process innovation, accuracy, and precision, throughput enhancement, material utilization, compact equipment development, environmental and life-cycle analysis, and predictive modeling of manufacturing processes with feature sizes less than one hundred micrometers.

Download or read book Micro electrical Discharge Machining Processes written by Golam Kibria and published by Springer. This book was released on 2018-12-15 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a comprehensive collection of micro electrical discharge machining (EDM) processes, including hybrid processes. It discusses the theory behind each process and their applications in various technological as well as biomedical domains, and also presents a brief background to various micro EDM processes, current research challenges, and detailed case studies of micro-manufacturing miniaturized parts. The book serves as a valuable guide for students and researchers interested in micro EDM and other related processes.

Download or read book Non traditional Micromachining Processes written by Golam Kibria and published by Springer. This book was released on 2017-03-07 with total page 431 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a complete coverage of micromachining processes from their basic material removal phenomena to past and recent research carried by a number of researchers worldwide. Chapters on effective utilization of material resources, improved efficiency, reliability, durability, and cost effectiveness of the products are presented. This book provides the reader with new and recent developments in the field of micromachining and microfabrication of engineering materials.

Download or read book Nano and Micromachining written by J. Paulo Davim and published by John Wiley & Sons. This book was released on 2013-03-04 with total page 257 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides the fundamentals and recent advances in nano and micromachining for modern manufacturing engineering. It begins by providing an outline of nanomachining with emphasis being given to molecular dynamics, cutting, and chip formation, before discussing various advances in field and machining processes, including advances in diamond cutting tools, conventional processes (microturning, microdrilling, micromilling, etc.), grinding and ultra-precision processes, and non-conventional machining processes (laser micromachining, EDM micromachining, etc.). The coverage concludes with an evaluation of subsurface damages in nano and micromachining and a presentation of applications in industry. As such, not only is this book useful to those studying engineering or machining at both an undergraduate and postgraduate level, but it also serves as a useful reference guide for academics and engineers involved in these areas and related industries.

Download or read book Materials Design and Applications written by Lucas F. M. da Silva and published by Springer. This book was released on 2017-03-11 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume features fundamental research and applications in the field of the design and application of engineering materials, predominantly within the context of mechanical engineering applications. This includes a wide range of materials engineering and technology, including metals, e.g., polymers, composites, and ceramics. Advanced applications would include manufacturing in the new or newer materials, testing methods, multi-scale experimental and computational aspects. This book features fundamental research and applications in the design of engineering materials, predominantly within the context of mechanical engineering applications such as automobile, railway, marine, aerospace, biomedical, pressure vessel technology, and turbine technology. It covers a wide range of materials, including metals, polymers, composites, and ceramics. Advanced applications include the manufacturing of new materials, testing methods, multi-scale experimental and computational aspects. p>

Download or read book Micro Cutting written by Dehong Huo and published by John Wiley & Sons. This book was released on 2013-07-30 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micro-Cutting: Fundamentals and Applications comprehensively covers the state of the art research and engineering practice in micro/nano cutting: an area which is becoming increasingly important, especially in modern micro-manufacturing, ultraprecision manufacturing and high value manufacturing. This book provides basic theory, design and analysis of micro-toolings and machines, modelling methods and techniques, and integrated approaches for micro-cutting. The fundamental characteristics, modelling, simulation and optimization of micro/nano cutting processes are emphasized with particular reference to the predictabilty, producibility, repeatability and productivity of manufacturing at micro and nano scales. The fundamentals of micro/nano cutting are applied to a variety of machining processes including diamond turning, micromilling, micro/nano grinding/polishing, ultraprecision machining, and the design and implementation of micro/nano cutting process chains and micromachining systems. Key features • Contains contributions from leading global experts • Covers the fundamental theory of micro-cutting • Presents applications in a variety of machining processes • Includes examples of how to implement and apply micro-cutting for precision and micro-manufacturing Micro-Cutting: Fundamentals and Applications is an ideal reference for manufacturing engineers, production supervisors, tooling engineers, planning and application engineers, as well as machine tool designers. It is also a suitable textbook for postgraduate students in the areas of micro-manufacturing, micro-engineering and advanced manufacturing methods.

Download or read book Micromanufacturing Engineering and Technology written by Yi Qin and published by William Andrew. This book was released on 2010-07-02 with total page 429 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micromanufacturing Engineering and Technology presents applicable knowledge of technology, equipment and applications, and the core economic issues of micromanufacturing for anyone with a basic understanding of manufacturing, material, or product engineering. It explains micro-engineering issues (design, systems, materials, market and industrial development), technologies, facilities, organization, competitiveness, and innovation with an analysis of future potential. The machining, forming, and joining of miniature / micro-products are all covered in depth, covering: grinding/milling, laser applications, and photo chemical etching; embossing (hot & UV), injection molding and forming (bulk, sheet, hydro, laser); mechanical assembly, laser joining, soldering, and packaging. - Presents case studies, material and design considerations, working principles, process configurations, and information on tools, equipment, parameters and control - Explains the many facets of recently emerging additive / hybrid technologies and systems, incl: photo-electric-forming, liga, surface treatment, and thin film fabrication - Outlines system engineering issues pertaining to handling, metrology, testing, integration and software - Explains widely used micro parts in bio / medical industry, information technology and automotive engineering - Covers technologies in high demand, such as: micro-mechanical-cutting, lasermachining, micro-forming, micro-EDM, micro-joining, photo-chemical-etching, photo-electro-forming, and micro-packaging

Download or read book Hybrid Micromachining and Microfabrication Technologies written by Sandip Kunar and published by John Wiley & Sons. This book was released on 2023-05-04 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: HYBRID MICROMACHINING and MICROFABRICATION TECHNOLOGIES The book aims to provide a thorough understanding of numerous advanced hybrid micromachining and microfabrication techniques as well as future directions, providing researchers and engineers who work in hybrid micromachining with a much-appreciated orientation. The book is dedicated to advanced hybrid micromachining and microfabrication technologies by detailing principals, techniques, processes, conditions, research advances, research challenges, and opportunities for various types of advanced hybrid micromachining and microfabrication. It discusses the mechanisms of material removal supported by experimental validation. Constructional features of hybrid micromachining setup suitable for industrial micromachining applications are explained. Separate chapters are devoted to different advanced hybrid micromachining and microfabrication to design and development of micro-tools, which is one of the most vital components in advanced hybrid micromachining, and which can also be used for various micro and nano applications. Power supply, and other major factors which influence advanced hybrid micromachining processes, are covered and research findings concerning the improvement of machining accuracy and efficiency are reported.

Download or read book Advanced Machining Processes of Metallic Materials written by Wit Grzesik and published by Elsevier. This book was released on 2008-01-22 with total page 489 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Machining Processes of Metallic Materials updates our knowledge on the metal cutting processes in relation to theory and industrial practice. In particular, many topics reflect recent developments, e.g. modern tool materials, computational machining, computer simulation of various process phenomena, chip control, monitoring of the cutting state, progressive and hybrid machining operations, and generation and modelling of surface integrity. This book addresses the present state and future development of machining technologies. It provides a comprehensive description of metal cutting theory, experimental and modelling techniques along with basic machining processes and their effective use in a wide range of manufacturing applications. Topics covered include fundamental physical phenomena and methods for their evaluation, available technology of machining processes for specific classes of materials and surface integrity. The book also provides strategies for optimalization techniques and assessment of machinability. Moreover, it describes topics not currently covered in other sources, such as high performance and multitasking (complete) machining with a high potential for increasing productivity, and virtual and e-machining. The research covered here has contributed to a more generalized vision of machining technology, including not only traditional manufacturing tasks but also new potential (emerging) applications such as micro- and nanotechnology. - Many practical examples of modern machining technology - Applicable for various technical, engineering and scientific levels - Collects together 20 years of research in the field and related technical information

Download or read book MicroNano Integration written by Harald Knobloch and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years, micro- and nanotechnologies became key technologies, having a significant effect on the development of new products and production technologies, as well as on novel medical diagnosis and treatment methods. Moreover, due to their enormous potential for new applications, micro- and nanotechnologies, in future, will increasingly affect our every days life, with an impact, comparable to that of the industrial revolution in the 19th century, or the developments in microelectronics in the 20th century. Although, micro- and nanotechnologies, in general, are regarded as two independent disciplines, there is obviously an intense interaction between these two fascinating technologies. The term "MicroNano Integration", in this context, addresses the enormous potential of synergy effects, provided by the combination and mutual integration of micro- and nanotechnological elements. In order to discuss the integration aspects of micro- and nanotechnologies, the "International Forum on MicroNano Integration", a conference, held in Potsdam, Germany on December 3-4, 2003 brought together researchers from both communities - from industries as well as from scientific institutions. The contributions to this book reflect the discussions during the conference.

Download or read book Hybrid Micro Machining Processes written by Sumit Bhowmik and published by Springer. This book was released on 2019-02-09 with total page 70 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents some of the recent hybrid micro-machining processes used to manufacture miniaturized products with micro level precision. The current developed technologies to manufacture the micro dimensioned products while meeting the desired precision level are described within the text. The authors especially highlight research that focuses on the development of new micro machining platforms while integrating the different technologies to manufacture the micro components in a high throughput and cost effective manner.

Download or read book Micro Electro fabrication written by Tanveer Saleh and published by Elsevier. This book was released on 2021-05-14 with total page 413 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micro Electro-fabrication outlines three major nanoscale electro-fabrication techniques, including electro-discharge machining, electrochemical machining and electrochemical deposition. Applications covered include the fabrication of nozzles for automobiles, miniature hole machining for aerospace turbine blade cooling, biomedical device fabrication, such as stents, the fabrication of microchannels for microfluidic application, the production of various MEMS devices, rapid prototyping of micro components, and nanoelectrode fabrication for scanning electron microscopy. This comprehensive book discusses the fundamental nature of the various electro-fabrication processes as well as mathematical modelling and applications. It is an important reference for materials scientists and engineers working at the nanoscale. Provides state-of-the-art research investigations on various topics of micro/nano EDM, micro LECD, micro/nano ECM and ECDM techniques Compares a variety of electro-fabrication techniques, outlining which is best in different situations Outlines a variety of modeling and optimization techniques relating to micro/nano EDM, micro LECD, micro/nano ECM and ECDM

Download or read book Accuracy Enhancement Technologies for Micromachining Processes written by Golam Kibria and published by Springer Nature. This book was released on 2020-02-20 with total page 221 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book bridges the gap between the demand for micro-featured components on the one hand, and successful micromachining of miniature products on the other. In addition to covering micromachining in the broader sense, it specifically addresses novel machining strategies implemented in various advanced micromachining processes to improve machining accuracy, energy consumption, component durability, and miniature-scale applicability. The book’s main goal is to present the capabilities of advanced micromachining processes in terms of miniature product manufacturing by highlighting various innovative machining strategies that can be used to augment the production scale and precision alike.

Download or read book Innovative Development in Micromanufacturing Processes written by Pawan Kumar Rakesh and published by CRC Press. This book was released on 2023-11-23 with total page 463 pages. Available in PDF, EPUB and Kindle. Book excerpt: Innovative Development in Micromanufacturing Processes details cutting edge technologies in micromanufacturing processes, an industry which has undergone a technological transformation in the past decade. Enabling engineers to create high performance, low cost, and long-lasting products, this book is an essential companion to all those working in micro and nano engineering. As products continue to get smaller and smaller, the field of micromanufacturing has gained an international audience. This book looks at both approaches of micromanufacturing: top-down and bottom-up. The top-down approach includes subtractive micromanufacturing processes such as microturning, micromilling, microdrilling, laser beam micromachining, and magnetic abrasive finishing. The bottom-up approach involves additive manufacturing processes such as micro-forming, micro deep drawing, microforging, microextrusion, and microwelding. Additionally, microjoining and microhybrid manufacturing processes are discussed in detail. The book also aids engineers and students in solving common manufacturing issues such as choice of materials and testing. The book will be of interest to those working in micro and nano engineering and machining, as well as students in manufacturing engineering, materials science, and more.

Download or read book Socio Inspired Optimization Methods for Advanced Manufacturing Processes written by Apoorva Shastri and published by Springer Nature. This book was released on 2020-08-11 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses comprehensively the advanced manufacturing processes, including illustrative examples of the processes, mathematical modeling, and the need to optimize associated parameter problems. In addition, it describes in detail the cohort intelligence methodology and its variants along with illustrations, to help readers gain a better understanding of the framework. The theoretical and statistical rigor is validated by comparing the solutions with evolutionary algorithms, simulation annealing, response surface methodology, the firefly algorithm, and experimental work. Lastly, the book critically reviews several socio-inspired optimization methods.

Download or read book Laser Micro Nano Manufacturing and 3D Microprinting written by Anming Hu and published by Springer Nature. This book was released on 2020-11-28 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive overview of the latest advances in laser techniques for micro-nano-manufacturing and an in-depth analysis of applications, such as 3D printing and nanojoining. Lasers have gained increasing significance as a precise tool for advanced manufacturing. Written by world leading scientists, the first part of the book presents the fundamentals of laser interaction with materials at the micro- and nanoscale, including multiphoton excitation and nonthermal melting, and allows readers to better understand advanced processing. In the second part, the authors focus on various advanced fabrications, such as laser peening, surface nanoengineering, and plasmonic heating. Finally, case studies are devoted to special applications, such as 3D printing, microfluidics devices, energy devices, and plasmonic and photonic waveguides. This book integrates both theoretical and experimental analysis. The combination of tutorial chapters and concentrated case studies will be critically attractive to undergraduate and graduate students, researchers, and engineers in the relevant fields. Readers will grasp the full picture of the application of laser for micro-nanomanufacturing and 3D printing.

Download or read book Microengineering of Metals and Ceramics Part I written by Henry Baltes and published by John Wiley & Sons. This book was released on 2008-09-26 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microstructures, electronics, nanotechnology - these vast fields of research are growing together as the size gap narrows and many different materials are combined. Current research, engineering sucesses and newly commercialized products hint at the immense innovative potentials and future applications that open up once mankind controls shape and function from the atomic level right up to the visible world without any gaps. In this volume, authors from three major competence centres for microengineering illustrate step by step the process from designing and simulating microcomponents of metallic and ceramic materials to replicating micro-scale components by injection molding.