Download or read book Typography written by Willi Kunz and published by . This book was released on 2000 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: Typography - that is, typography the reader can comprehend and understand - is based on certain fundamental principles. As long as letters, words, and sentences are used to transmit information, these same principles will remain valid - even in electroni

Download or read book Microsystem Design written by Stephen D. Senturia and published by Springer Science & Business Media. This book was released on 2005-12-20 with total page 699 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is a real pleasure to write the Foreword for this book, both because I have known and respected its author for many years and because I expect this book’s publication will mark an important milestone in the continuing worldwide development of microsystems. By bringing together all aspects of microsystem design, it can be expected to facilitate the training of not only a new generation of engineers, but perhaps a whole new type of engineer – one capable of addressing the complex range of problems involved in reducing entire systems to the micro- and nano-domains. This book breaks down disciplinary barriers to set the stage for systems we do not even dream of today. Microsystems have a long history, dating back to the earliest days of mic- electronics. While integrated circuits developed in the early 1960s, a number of laboratories worked to use the same technology base to form integrated sensors. The idea was to reduce cost and perhaps put the sensors and circuits together on the same chip. By the late-60s, integrated MOS-photodiode arrays had been developed for visible imaging, and silicon etching was being used to create thin diaphragms that could convert pressure into an electrical signal. By 1970, selective anisotropic etching was being used for diaphragm formation, retaining a thick silicon rim to absorb package-induced stresses. Impurity- and electrochemically-based etch-stops soon emerged, and "bulk micromachining" came into its own.

Download or read book Micro written by Ruth Slavid and published by Laurence King. This book was released on 2009-03-18 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: Very small buildings have a special appeal. The constraints of space and cost can actually liberate the imagination. This book includes projects which consist of no more than a few key spaces, in many cases just a single space. It also features 53 case studies.

Download or read book Design for Micro Utopias written by John Wood and published by Routledge. This book was released on 2017-03-02 with total page 231 pages. Available in PDF, EPUB and Kindle. Book excerpt: Everyone is already painfully aware of our predicament - ecological extinctions, dwindling fossil fuel reserves and economic chaos. The solutions are less obvious, despite the many opportunities that surround us. We have never had more access to resources, knowledge and technology but this is not the problem. What we lack most is creative thinking, fuelled by collective optimism. In a pragmatic world run by careerist experts this is hardly surprising. As voters and consumers we are trained to choose and complain, but not how to envisage what we really, really want. How can we design a better world unless we revive the art of dreaming? For without dreams we are lost. Perhaps it should be the duty of all citizens to imagine alternative futures; in effect, to think more like designers. After all, designers have always been dreamers, and have often found ways to realize their dreams. Design for Micro-Utopias does not advocate a single, monolithic Utopia. Rather, it invites readers to embrace a more pluralized and mercurial version of Thomas More's famous 1516 novel of the same name. It therefore encourages the proliferation of many 'micro-utopias' rather than one 'Utopia'. This requires a less negative, critical and rational approach. Referencing a wide range of philosophical thinking from Aristotle to the present day, western and eastern spiritual ideals, and scientific, biological and systems theory, John Wood offers remedies for our excessively individualistic, mechanistic and disconnected thinking, and asks whether a metadesign approach might bring about a new mode of governance. This is a daring idea. Ultimately, he reminds us that if we believe that we will never be able to design miracles we make it more likely that this is so. The first step is to turn the 'impossible' into the 'thinkable'.

Download or read book Introduction to the Design of Fixed wing Micro Air Vehicles written by T. J. Mueller and published by Amer Inst of Aeronautics &. This book was released on 2007-01 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: This intriguing book breaks new ground on an emerging subject that has attracted considerable attention: the use of unmanned micro air vehicles (MAVs) to conduct special, limited duration missions. Significant advances in the miniaturization of electronics make it now possible to use vehicles of this type in a detection or surveillance role to carry visual, acoustic, chemical, or biological sensors. Interestingly, many of the advances in MAV technology can be traced directly to annual student competitions, begun in the late 1990s, that use relatively low cost model airplane equipment. The wide variety of configurations entered in these contests and their ongoing success has led to a serious interest in testing the performance of these vehicles for adaptation to practical applications. MAVs present aerodynamic issues unique to their size and the speeds at which they operate. Of particular concern is the aerodynamic efficiency of various fixed wing concepts. Very little information on the performance of low aspect ratio wing planforms existed for this flight regime until MAVs became of interest and the proliferation of fixed wing designs has since expanded. This book presents a brief history of unmanned air vehicles and offers elements of aerodynamics for low aspect ratio wings. Propulsion and the basic concepts for fixed wing MAV design are presented, as is a method for autopilot integration. Three different wing configurations are presented in a series of step-by-step case studies. The goal of the book is to assist both working professionals and students to design, build, and fly MAVs, and do so in a way that will advance the state of the art and lead to the development of even smalleraircraft.

Download or read book Microinteractions written by Dan Saffer and published by "O'Reilly Media, Inc.". This book was released on 2013-04-30 with total page 171 pages. Available in PDF, EPUB and Kindle. Book excerpt: It’s the little things that turn a good digital product into a great one. With this practical book, you’ll learn how to design effective microinteractions: the small details that exist inside and around features. How can users change a setting? How do they turn on mute, or know they have a new email message? Through vivid, real-world examples from today’s devices and applications, author Dan Saffer walks you through a microinteraction’s essential parts, then shows you how to use them in a mobile app, a web widget, and an appliance. You’ll quickly discover how microinteractions can change a product from one that’s tolerated into one that’s treasured. Explore a microinteraction’s structure: triggers, rules, feedback, modes, and loops Learn the types of triggers that initiate a microinteraction Create simple rules that define how your microinteraction can be used Help users understand the rules with feedback, using graphics, sounds, and vibrations Use modes to let users set preferences or modify a microinteraction Extend a microinteraction’s life with loops, such as “Get data every 30 seconds”

Download or read book Micro hydro Design Manual written by Adam Harvey and published by Intermediate Technology. This book was released on 1993-01 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micro-Hydro Design Manual has grown from Intermediate Technology's field experiences with micro-hydro installations and covers operation and maintenance, commissioning, electrical power, induction generators, electronic controllers, management, and energy surveys.There is an increasing need in many countries for power supplies to rural areas, partly to support industries, and partly to provide illumination at night. Government authorities are faced with the very high costs of extending electricity grids. Often micro-hydro provides an economic alternative to the grid. This is because independentmicro-hydro schemes save on the cost of grid transmission lines, and because grid extension schemes often have very expensive equipment and staff costs. In contrast, micro-hydro schemes can be designed and built by local staff andsmaller organizations following less strict regulations and using 'off-the-shelf' components or locally made machinery.

Download or read book Micro Electro Mechanical System Design written by James J. Allen and published by CRC Press. This book was released on 2005-07-08 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is challenging at best to find a resource that provides the breadth of information necessary to develop a successful micro electro mechanical system (MEMS) design. Micro Electro Mechanical System Design is that resource. It is a comprehensive, single-source guide that explains the design process by illustrating the full range of issues involved,

Download or read book Self Heal by Design written by Barbara O'Neill and published by . This book was released on 2015-03-05 with total page 60 pages. Available in PDF, EPUB and Kindle. Book excerpt: The body can self heal by its very design, and you can design a program that will enable the body to do the very thing it was made to do--heal itself.

Download or read book Building Micro Frontends written by Luca Mezzalira and published by "O'Reilly Media, Inc.". This book was released on 2021-11-17 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: What's the answer to today's increasingly complex web applications? Micro-frontends. Inspired by the microservices model, this approach lets you break interfaces into separate features managed by different teams of developers. With this practical guide, Luca Mezzalira shows software architects, tech leads, and software developers how to build and deliver artifacts atomically rather than use a big bang deployment. You'll learn how micro-frontends enable your team to choose any library or framework. This gives your organization technical flexibility and allows you to hire and retain a broad spectrum of talent. Micro-frontends also support distributed or colocated teams more efficiently. Pick up this book and learn how to get started with this technological breakthrough right away. Explore available frontend development architectures Learn how microservice principles apply to frontend development Understand the four pillars for creating a successful micro-frontend architecture Examine the benefits and pitfalls of existing micro-frontend architectures Learn principles and best practices for creating successful automation strategies Discover patterns for integrating micro-frontend architectures using microservices or a monolith API layer

Download or read book Design and Fabrication of Self Powered Micro Harvesters written by C. T. Pan and published by John Wiley & Sons. This book was released on 2014-04-09 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents the latest methods for designing and fabricating self-powered micro-generators and energy harvester systems Design and Fabrication of Self-Powered Micro-Harvesters introduces the latest trends of self-powered generators and energy harvester systems, including the design, analysis and fabrication of micro power systems. Presented in four distinct parts, the authors explore the design and fabrication of: vibration-induced electromagnetic micro-generators; rotary electromagnetic micro-generators; flexible piezo-micro-generator with various widths; and PVDF electrospunpiezo-energy with interdigital electrode. Focusing on the latest developments of self-powered microgenerators such as micro rotary with LTCC and filament winding method, flexible substrate, and piezo fiber-typed microgenerator with sound organization, the fabrication processes involved in MEMS and nanotechnology are introduced chapter by chapter. In addition, analytical solutions are developed for each generator to help the reader to understand the fundamentals of physical phenomena. Fully illustrated throughout and of a high technical specification, it is written in an accessible style to provide an essential reference for industry and academic researchers. Comprehensive treatment of the newer harvesting devices including vibration-induced and rotary electromagnetic microgenerators, polyvinylidene fluoride (PVDF) nanoscale/microscale fiber, and piezo-micro-generators Presents innovative technologies including LTCC (low temperature co-fire ceramic) processes, and PCB (printed circuit board) processes Offers interdisciplinary interest in MEMS/NEMS technologies, green energy applications, bio-related sensors, actuators and generators Presented in a readable style describing the fundamentals, applications and explanations of micro-harvesters, with full illustration

Download or read book Microservices Patterns written by Chris Richardson and published by Simon and Schuster. This book was released on 2018-10-27 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: "A comprehensive overview of the challenges teams face when moving to microservices, with industry-tested solutions to these problems." - Tim Moore, Lightbend 44 reusable patterns to develop and deploy reliable production-quality microservices-based applications, with worked examples in Java Key Features 44 design patterns for building and deploying microservices applications Drawing on decades of unique experience from author and microservice architecture pioneer Chris Richardson A pragmatic approach to the benefits and the drawbacks of microservices architecture Solve service decomposition, transaction management, and inter-service communication Purchase of the print book includes a free eBook in PDF, Kindle, and ePub formats from Manning Publications. About The Book Microservices Patterns teaches you 44 reusable patterns to reliably develop and deploy production-quality microservices-based applications. This invaluable set of design patterns builds on decades of distributed system experience, adding new patterns for composing services into systems that scale and perform under real-world conditions. More than just a patterns catalog, this practical guide with worked examples offers industry-tested advice to help you design, implement, test, and deploy your microservices-based application. What You Will Learn How (and why!) to use microservices architecture Service decomposition strategies Transaction management and querying patterns Effective testing strategies Deployment patterns This Book Is Written For Written for enterprise developers familiar with standard enterprise application architecture. Examples are in Java. About The Author Chris Richardson is a Java Champion, a JavaOne rock star, author of Manning’s POJOs in Action, and creator of the original CloudFoundry.com. Table of Contents Escaping monolithic hell Decomposition strategies Interprocess communication in a microservice architecture Managing transactions with sagas Designing business logic in a microservice architecture Developing business logic with event sourcing Implementing queries in a microservice architecture External API patterns Testing microservices: part 1 Testing microservices: part 2 Developing production-ready services Deploying microservices Refactoring to microservices

Download or read book Advances in Micro Bioreactor Design for Organ Cell Studies written by Carl-Fredrik Mandenius and published by MDPI. This book was released on 2018-12-06 with total page 169 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue "Advances in Micro-Bioreactor Design for Organ Cell Studies" that was published in Bioengineering

Download or read book Micro System Technologies 90 written by Herbert Reichl and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 843 pages. Available in PDF, EPUB and Kindle. Book excerpt: On September 10-13, 1990, the first international meeting on Microsystem Technologies takes place at the Berlin International Congress Center. Most of the traditional congresses deal with themes that become more and more specific, and only a small part of the scientific world is reflected. The Micro System Technologies is attempting to take the opposite direction: During the last two decades the development of microelectronics was characterized by a tremendous increase of complexity of integrated circuits. At the same time the fields of microoptics and micromechanics have been developed to an advanced state of the art by the application of thin film and semiconductor technologies. The trend of the future development is to increase the integration density by combining the microelectronic, microoptic, and micro mechanic aspects to new complex multifunctional systems, which are able to comprise sensors, actuators, analogue and digital circuits on the same chip or on multichip-modules. Microsystems will lead to extensions of the field of microelectronic applications with important technical alterations and can open new considerable markets. For the realization of economical solutions for microsystems a lot of interdisciplinary cooperation and know-how has to be developed. New materials for sensitive layers, substrates, conducting, semiconducting, or isolating thin films are the basis for the development of new technologies. The increasing complexity leads to increasing interaction among electrical and non-electrical quantities.

Download or read book Micro Manufacturing written by Muammer Koç and published by John Wiley & Sons. This book was released on 2011-05-06 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the first of its kind to collectively address design-based and mechanical micro-manufacturing topics in one place. It focuses on design and materials selection, as well as the manufacturing of micro-products using mechanical-based micro-manufacturing process technologies. After addressing the fundamentals and non-metallic-based micro-manufacturing processes in the semiconductor industry, it goes on to address specific metallic-based micro-manufacturing processes, such as: micro-forming, micro-machining, micro-molding, micro-laser processing, micro-layered manufacturing, micro-joining, micro-assembly and materials handling, and microEDM and ECM. The book provides an in-depth understanding of materials behavior at micro-scales and under different micro-scale processing conditions, while also including a wide variety of emerging micro-scale manufacturing issues and examples.

Download or read book Nanotube Superfiber Materials written by Mark Schulz and published by William Andrew. This book was released on 2013-09-16 with total page 861 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanotube Superfiber Materials refers to different forms of macroscale materials with unique properties constructed from carbon nanotubes. These materials include nanotube arrays, ribbons, scrolls, yarn, braid, and sheets. Nanotube materials are in the early stage of development and this is the first dedicated book on the subject. Transitioning from molecules to materials is a breakthrough that will positively impact almost all industries and areas of society. Key properties of superfiber materials are high flexibility and fatigue resistance, high energy absorption, high strength, good electrical conductivity, high maximum current density, reduced skin and proximity effects, high thermal conductivity, lightweight, good field emission, piezoresistive, magnetoresistive, thermoelectric, and other properties. These properties will open up the door to dozens of applications including replacing copper wire for power conduction, EMI shielding, coax cable, carbon biofiber, bullet-proof vests, impact resistant glass, wearable antennas, biomedical microdevices, biosensors, self-sensing composites, supercapacitors, superinductors, hybrid superconductor, reinforced elastomers, nerve scaffolding, energy storage, and many others. The scope of the book covers three main areas: Part I: Processing; Part II: Properties; and Part III: Applications. Processing involves nanotube synthesis and macro scale material formation methods. Properties covers the mechanical, electrical, chemical and other properties of nanotubes and macroscale materials. Different approaches to growing high quality long nanotubes and spinning the nanotubes into yarn are explained in detail. The best ideas are collected from all around the world including commercial approaches. Applications of nanotube superfiber cover a huge field and provides a broad survey of uses. The book gives a broad overview starting from bioelectronics to carbon industrial machines. First book to explore the production and applications of macro-scale materials made from nano-scale particles Sets out the processes for producing macro-scale materials from carbon nanotubes, and describes the unique properties of these materials Potential applications for CNT fiber/yarn include replacing copper wire for power conduction, EMI shielding, coax cable, carbon biofiber, bullet-proof vests, impact resistant glass, wearable antennas, biomedical microdevices, biosensors, self-sensing composites, supercapacitors, superinductors, hybrid superconductor, reinforced elastomers, nerve scaffolding, energy storage, and many others

Download or read book Micro Macrame Jewelry written by Kelsy Eason and published by Kalmbach Books. This book was released on 2016-10-17 with total page 113 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micro-Macramé Jewelry, Stylish Designs for Everyday Wear by author and designer Kelsy Eason contains 20 plus knotting projects for the beginner. Her teaching style is simple for the beginner to learn and she adds tips throughout the book to make the experience even more enjoyable. Kelsy uses a variety of fiber materials and beads to create designs that are not only great for everyday wear but allow for personalization by the person making them. From waxed linen to leather lace everyone will find some project to love in this unique book.