Download or read book Micro and Opto Electronic Materials and Structures Physics Mechanics Design Reliability Packaging written by Ephraim Suhir and published by Springer Science & Business Media. This book was released on 2007-05-26 with total page 1471 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook provides the most comprehensive, up-to-date and easy-to-apply information on the physics, mechanics, reliability and packaging of micro- and opto-electronic materials. It details their assemblies, structures and systems, and each chapter contains a summary of the state-of-the-art in a particular field. The book provides practical recommendations on how to apply current knowledge and technology to design and manufacture. It further describes how to operate a viable, reliable and cost-effective electronic component or photonic device, and how to make such a device into a successful commercial product.
Download or read book Micro and Opto Electronic Materials and Structures Physics Mechanics Design Reliability Packaging written by Ephraim Suhir and published by Springer. This book was released on 2007-05-29 with total page 1460 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook provides the most comprehensive, up-to-date and easy-to-apply information on the physics, mechanics, reliability and packaging of micro- and opto-electronic materials. It details their assemblies, structures and systems, and each chapter contains a summary of the state-of-the-art in a particular field. The book provides practical recommendations on how to apply current knowledge and technology to design and manufacture. It further describes how to operate a viable, reliable and cost-effective electronic component or photonic device, and how to make such a device into a successful commercial product.
Download or read book Micro and Opto electronic Materials and Structures Materials physics written by Ephraim Suhir and published by . This book was released on 2007 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Materials for Advanced Packaging written by Daniel Lu and published by Springer. This book was released on 2016-11-18 with total page 969 pages. Available in PDF, EPUB and Kindle. Book excerpt: Significant progress has been made in advanced packaging in recent years. Several new packaging techniques have been developed and new packaging materials have been introduced. This book provides a comprehensive overview of the recent developments in this industry, particularly in the areas of microelectronics, optoelectronics, digital health, and bio-medical applications. The book discusses established techniques, as well as emerging technologies, in order to provide readers with the most up-to-date developments in advanced packaging.
Download or read book Moisture Sensitivity of Plastic Packages of IC Devices written by X.J. Fan and published by Springer Science & Business Media. This book was released on 2010-07-23 with total page 573 pages. Available in PDF, EPUB and Kindle. Book excerpt: Moisture Sensitivity of Plastic Packages of IC Devices provides information on the state-of-the-art techniques and methodologies related to moisture issues in plastic packages. The most updated, in-depth and systematic technical and theoretical approaches are addressed in the book. Numerous industrial applications are provided, along with the results of the most recent research and development efforts, including, but not limited to: thorough exploration of moisture's effects based on lectures and tutorials by the authors, consistent focus on solution-based approaches and methodologies for improved reliability in plastic packaging, emerging theories and cutting-edge industiral applications presented by the leading professionals in the field. Moisture plays a key role in the reliability of plastic packages of IC devices, and moisture-induced failures have become an increasing concern with the development of advanced IC devices. This second volume in the Micro- and Opto-Electronic Materials, Structures, and Systems series is a must-read for researchers and engineers alike.
Download or read book Structural Dynamics of Electronic and Photonic Systems written by Ephraim Suhir and published by John Wiley & Sons. This book was released on 2011-04-04 with total page 610 pages. Available in PDF, EPUB and Kindle. Book excerpt: The proposed book will offer comprehensive and versatile methodologies and recommendations on how to determine dynamic characteristics of typical micro- and opto-electronic structural elements (printed circuit boards, solder joints, heavy devices, etc.) and how to design a viable and reliable structure that would be able to withstand high-level dynamic loading. Particular attention will be given to portable devices and systems designed for operation in harsh environments (such as automotive, aerospace, military, etc.) In-depth discussion from a mechanical engineer's viewpoint will be conducted to the key components’ level as well as the whole device level. Both theoretical (analytical and computer-aided) and experimental methods of analysis will be addressed. The authors will identify how the failure control parameters (e.g. displacement, strain and stress) of the vulnerable components may be affected by the external vibration or shock loading, as well as by the internal parameters of the infrastructure of the device. Guidelines for material selection, effective protection and test methods will be developed for engineering practice.
Download or read book Avoiding Inelastic Strains in Solder Joint Interconnections of IC Devices written by Ephraim Suhir and published by CRC Press. This book was released on 2021-01-28 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: Avoiding Inelastic Strains in Solder Joint Interconnections of IC Devices addresses analytical (mathematical) modeling approaches aimed at understanding the underlying physics and mechanics of the behavior and performance of solder materials and solder joint interconnections of IC devices. The emphasis is on design for reliability, including probabilistic predictions of the solder lifetime. Describes how to use the developed methods of analytical predictive modeling to minimize thermal stresses and strains in solder joint of IC devices Shows how to build the preprocessing models in finite-element analyses (FEA) by comparing the FEA and analytical data Covers how to design the most effective test vehicles for testing solder joints Details how to design and organize, in addition to or sometimes even instead of highly accelerated life tests (HALT), highly focused and highly cost-effective failure oriented accelerated testing (FOAT) to understand the physic of failure of solder joint interconnections Outlines how to convert the low cycle fatigue conditions into elastic fatigue conditions and to assess the fatigue lifetime in such cases Illustrates ways to replace time- and labor-consuming, expensive, and possibly misleading temperature cycling tests with simpler and physically meaningful accelerated tests This book is aimed towards professionals in electronic and photonic packaging, electronic and optical materials, materials engineering, and mechanical design.
Download or read book Assembly and Reliability of Lead Free Solder Joints written by John H. Lau and published by Springer Nature. This book was released on 2020-05-29 with total page 545 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the assembly and reliability of lead-free solder joints. Both the principles and engineering practice are addressed, with more weight placed on the latter. This is achieved by providing in-depth studies on a number of major topics such as solder joints in conventional and advanced packaging components, commonly used lead-free materials, soldering processes, advanced specialty flux designs, characterization of lead-free solder joints, reliability testing and data analyses, design for reliability, and failure analyses for lead-free solder joints. Uniquely, the content not only addresses electronic manufacturing services (EMS) on the second-level interconnects, but also packaging assembly on the first-level interconnects and the semiconductor back-end on the 3D IC integration interconnects. Thus, the book offers an indispensable resource for the complete food chain of electronics products.
Download or read book Encyclopedia of Packaging Materials Processes and Mechanics written by Avram Bar-Cohen and published by World Scientific. This book was released on 2019 with total page 1079 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Packaging materials, assembly processes, and the detailed understanding of multilayer mechanics have enabled much of the progress in miniaturization, reliability, and functional density achieved by modern electronic, microelectronic, and nanoelectronic products. The design and manufacture of miniaturized packages, providing low-loss electrical and/or optical communication, while protecting the semiconductor chips from environmental stresses and internal power cycling, require a carefully balanced selection of packaging materials and processes. Due to the relative fragility of these semiconductor chips, as well as the underlying laminated substrates and the bridging interconnect, selection of the packaging materials and processes is inextricably bound with the mechanical behavior of the intimately packaged multilayer structures, in all phases of development for traditional, as well as emerging, electronic product categories. The Encyclopedia of Packaging Materials, Processes, and Mechanics, compiled in 8, multi-volume sets, provides comprehensive coverage of the configurations and techniques, assembly materials and processes, modeling and simulation tools, and experimental characterization and validation techniques for electronic packaging. Each of the volumes presents the accumulated wisdom and shared perspectives of leading researchers and practitioners in the packaging of electronic components. The Encyclopedia of Packaging Materials, Processes, and Mechanics will provide the novice and student with a complete reference for a quick ascent on the packaging "learning curve," the practitioner with a validated set of techniques and tools to face every challenge in packaging design and development, and researchers with a clear definition of the state-of-the-art and emerging needs to guide their future efforts. This encyclopedia will, thus, be of great interest to packaging engineers, electronic product development engineers, and product managers, as well as to researchers in the assembly and mechanical behavior of electronic and photonic components and systems. It will be most beneficial to undergraduate and graduate students studying materials, mechanical, electrical, and electronic engineering, with a strong interest in electronic packaging applications"--Publisher's website
Download or read book Safety Reliability Risk and Life Cycle Performance of Structures and Infrastructures written by George Deodatis and published by CRC Press. This book was released on 2014-02-10 with total page 1112 pages. Available in PDF, EPUB and Kindle. Book excerpt: Safety, Reliability, Risk and Life-Cycle Performance of Structures and Infrastructures contains the plenary lectures and papers presented at the 11th International Conference on STRUCTURAL SAFETY AND RELIABILITY (ICOSSAR2013, New York, NY, USA, 16-20 June 2013), and covers major aspects of safety, reliability, risk and life-cycle performance of str
Download or read book Solder Joint Reliability Assessment written by Mohd N. Tamin and published by Springer Science & Business. This book was released on 2014-04-26 with total page 179 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a systematic approach in performing reliability assessment of solder joints using Finite Element (FE) simulation. Essential requirements for FE modelling of an electronic package or a single reflowed solder joint subjected to reliability test conditions are elaborated. These cover assumptions considered for a simplified physical model, FE model geometry development, constitutive models for solder joints and aspects of FE model validation. Fundamentals of the mechanics of solder material are adequately reviewed in relation to FE formulations. Concept of damage is introduced along with deliberation of cohesive zone model and continuum damage model for simulation of solder/IMC interface and bulk solder joint failure, respectively. Applications of the deliberated methodology to selected problems in assessing reliability of solder joints are demonstrated. These industry-defined research-based problems include solder reflow cooling, temperature cycling and mechanical fatigue of a BGA package, JEDEC board-level drop test and mechanisms of solder joint fatigue. Emphasis is placed on accurate quantitative assessment of solder joint reliability through basic understanding of the mechanics of materials as interpreted from results of FE simulations. The FE simulation methodology is readily applicable to numerous other problems in mechanics of materials and structures.
Download or read book Lead Free Solder written by John Hock Lye Pang and published by Springer Science & Business Media. This book was released on 2011-10-15 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lead-free solders are used extensively as interconnection materials in electronic assemblies and play a critical role in the global semiconductor packaging and electronics manufacturing industry. Electronic products such as smart phones, notebooks and high performance computers rely on lead-free solder joints to connect IC chip components to printed circuit boards. Lead Free Solder: Mechanics and Reliability provides in-depth design knowledge on lead-free solder elastic-plastic-creep and strain-rate dependent deformation behavior and its application in failure assessment of solder joint reliability. It includes coverage of advanced mechanics of materials theory and experiments, mechanical properties of solder and solder joint specimens, constitutive models for solder deformation behavior; numerical modeling and simulation of solder joint failure subject to thermal cycling, mechanical bending fatigue, vibration fatigue and board-level drop impact tests.
Download or read book Polymers in Organic Electronics written by Sulaiman Khalifeh and published by Elsevier. This book was released on 2020-04-01 with total page 617 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymers in Organic Electronics: Polymer Selection for Electronic, Mechatronic, and Optoelectronic Systems provides readers with vital data, guidelines, and techniques for optimally designing organic electronic systems using novel polymers. The book classifies polymer families, types, complexes, composites, nanocomposites, compounds, and small molecules while also providing an introduction to the fundamental principles of polymers and electronics. Features information on concepts and optimized types of electronics and a classification system of electronic polymers, including piezoelectric and pyroelectric, optoelectronic, mechatronic, organic electronic complexes, and more. The book is designed to help readers select the optimized material for structuring their organic electronic system.Chapters discuss the most common properties of electronic polymers, methods of optimization, and polymeric-structured printed circuit boards. The polymeric structures of optoelectronics and photonics are covered and the book concludes with a chapter emphasizing the importance of polymeric structures for packaging of electronic devices. Provides key identifying details on a range of polymers, micro-polymers, nano-polymers, resins, hydrocarbons, and oligomers Covers the most common electrical, electronic, and optical properties of electronic polymers Describes the underlying theories on the mechanics of polymer conductivity Discusses polymeric structured printed circuit boards, including their rapid prototyping and optimizing their polymeric structures Shows optimization methods for both polymeric structures of organic active electronic components and organic passive electronic components
Download or read book Human in the Loop written by Ephraim Suhir and published by CRC Press. This book was released on 2018-03-28 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt: Improvements in safety in the air and in space can be achieved through better ergonomics, better work environments, and other efforts of traditional avionic psychology that directly affect human behaviors and performance. Not limited to just the aerospace field, this book discusses adaptive probabilistic predictive modeling in human-in-the-loop situations and gets you familiar with a new, powerful, flexible, and effective approach to making outcomes from missions successful and safe. Covers the concepts, which are adaptable across other disciplines, and methodology for evaluating the likelihood of a successful outcome of an extraordinary situation Considers human performance and equipment/instrumentation reliability, as well as other possible sources of uncertainty Presents probabilistic assessment of an aerospace mission outcome Provides the most effective, physically meaningful, and cost-effective planning of an aerospace mission Offers how to organize and provide the most effective training of personnel
Download or read book Handbook of Solid State Diffusion Volume 2 written by Aloke Paul and published by Elsevier. This book was released on 2017-04-13 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Solid State Diffusion, Volume 2: Diffusion Analysis in Material Applications covers the basic fundamentals, techniques, applications, and latest developments in the area of solid-state diffusion, offering a pedagogical understanding for students, academicians, and development engineers. Both experimental techniques and computational methods find equal importance in the second of this two volume set. Volume 2 covers practical issues on diffusion phenomena in bulk, thin film, and in nanomaterials. Diffusion related problems and analysis of methods in industrial applications, such as electronic industry, high temperature materials, nuclear materials, and superconductor materials are discussed. Presents a handbook with a short mathematical background and detailed examples of concrete applications of the sophisticated methods of analysis Enables readers to learn the basic concepts of experimental approaches and the computational methods involved in solid-state diffusion Covers bulk, thin film, and nanomaterials Introduces the problems and analysis in important materials systems in various applications Collates contributions from academic and industrial problems from leading scientists involved in developing key concepts across the globe
Download or read book Inertial MEMS written by Volker Kempe and published by Cambridge University Press. This book was released on 2011-02-17 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: A practical and systematic overview of the design, fabrication and test of MEMS-based inertial sensors, this comprehensive and rigorous guide shows you how to analyze and transform application requirements into practical designs, and helps you to avoid potential pitfalls and to cut design time. With this book you'll soon be up to speed on the relevant basics, including MEMS technologies, packaging, kinematics and mechanics, and transducers. You'll also get a thorough evaluation of different approaches and architectures for design and an overview of key aspects of testing and calibration. Unique insights into the practical difficulties of making sensors for real-world applications make this up-to-date description of the state of the art in inertial MEMS an ideal resource for professional engineers in industry as well as students looking for a complete introduction to the area.
Download or read book Mems Packaging written by Lee Yung-cheng and published by World Scientific. This book was released on 2018-01-03 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: MEMS sensors and actuators are enabling components for smartphones, AR/VR, and wearable electronics. MEMS packaging is recognized as one of the most critical activities to design and manufacture reliable MEMS. A unique challenge to MEMS packaging is how to protect moving MEMS devices during manufacturing and operation. With the introduction of wafer level capping and encapsulation processes, this barrier is removed successfully. In addition, MEMS devices should be integrated with their electronic chips with the smallest footprint possible. As a result, 3D packaging is applied to connect the devices vertically for the most effective integration. Such 3D packaging also paves the way for further heterogenous integration of MEMS devices, electronics, and other functional devices. This book consists of chapters written by leaders developing products in a MEMS industrial setting and faculty members conducting research in an academic setting. After an introduction chapter, the practical issues are covered: through-silicon vias (TSVs), vertical interconnects, wafer level packaging, motion sensor-to-CMOS bonding, and use of printed circuit board technology to fabricate MEMS. These chapters are written by leaders developing MEMS products. Then, fundamental issues are discussed, topics including encapsulation of MEMS, heterogenous integration, microfluidics, solder bonding, localized sealing, microsprings, and reliability. Contents: Introduction to MEMS Packaging (Y C Lee, Ramesh Ramadoss and Nils Hoivik)Silex's TSV Technology: Overview of Processes and MEMS Applications (Tomas Bauer and Thorbjörn Ebefors)Vertical Interconnects for High-end MEMS (Maaike M Visser Taklo and Sigurd Moe)Using Wafer-Level Packaging to Improve Sensor Manufacturability and Cost (Paul Pickering, Collin Twanow and Dean Spicer)Nasiri Fabrication Process for Low-Cost Motion Sensors in the Consumer Market (Steven Nasiri, Ramesh Ramadoss and Sandra Winkler)PCB Based MEMS and Microfluidics (Ramesh Ramadoss, Antonio Luque and Carmen Aracil)Single Wafer Encapsulation of MEMS Resonators (Janna Rodriguez and Thomas Kenny)Heterogeneous Integration and Wafer-Level Packaging of MEMS (Masayoshi Esashi and Shuji Tanaka)Packaging of Membrane-Based Polymer Microfluidic Systems (Yu-Chuan Su)Wafer-Level Solder Bonding by Using Localized Induction Heating (Hsueh-An Yang, Chiung-Wen Lin and Weileun Fang)Localized Sealing Schemes for MEMS Packaging (Y T Cheng, Y C Su and Liwei Lin)Microsprings for High-Density Flip-Chip Packaging (Eugene M Chow and Christopher L Chua)MEMS Reliability (Chien-Ming Huang, Arvind Sai SarathiVasan, Yunhan Huang, Ravi Doraiswami, Michael Osterman and Michael Pecht) Readership: Researchers and graduate students participating in research, R&D, and manufacturing of MEMS products; professionals associated with the integration for systems represented by smartphones, AR/VR, and wearable electronics. Keywords: MEMS;Packaging;Microelectromechanical Systems;Reliability;Microstructures;Sensors;ActuatorsReview: Key Features: The book covers engineering topics critical to product development as well as research topics critical to integration for future MEMS-enabled systemsIt is a major resource for those participating in MEMS and for every professional associated with the integration for systems represented by smartphones, AR/VR and wearable electronics
