Download or read book Micro and Nanostructured Microfluidic Devices for Localized Protein Immobilization and Other Biomedical Applications written by Steidle, Nicole E. and published by KIT Scientific Publishing. This book was released on 2014-12-23 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt: A new immobilization method for the localized adsorption of proteins on thermoplastic surfaces is introduced. Artificial three-phase interfaces were realized by surface structuring to control the wetting behavior which lead to a preferred adsorption in these modified areas. Additionally, different fabrication methods were analyzed to determine mass fabrication capabilities. These fabrication methods also allowed the production of fully structured microchannels to tune the fluids behavior within.

Download or read book Micro and Nanostructured Microfluidic Devices for Localized Protein Immobilization and Other Biomedical Applications written by Nicole E Steidle and published by . This book was released on 2020-10-09 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt: A new immobilization method for the localized adsorption of proteins on thermoplastic surfaces is introduced. Artificial three-phase interfaces were realized by surface structuring to control the wetting behavior which lead to a preferred adsorption in these modified areas. Additionally, different fabrication methods were analyzed to determine mass fabrication capabilities. These fabrication methods also allowed the production of fully structured microchannels to tune the fluids behavior within. This work was published by Saint Philip Street Press pursuant to a Creative Commons license permitting commercial use. All rights not granted by the work's license are retained by the author or authors.

Download or read book Hot Embossing written by Matthias Worgull and published by Elsevier. This book was released on 2024-06-17 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of Hot Embossing: Theory of Microreplication will present the current state of the art in microreplication with a focus on hot embossing, nanoimprint, thermoforming, and roll-to-roll replication. Polymer processing, the theory of polymers and the processing of polymers are discussed in detail. Aspects of process simulation and the corresponding material models are also covered. The book contains in-depth analysis of processing processes and replication techniques including mold fabrication. Monitoring, data analysis and reliability of molded parts is also discussed. In the Second Edition new processes are included, including the process of micro- and nanothermoforming to generate 3D structures and the hot pulling processes to generate hierarchical structures with high aspect ratios. Based on hot pulling, “Nanofur for Oil-water-separation is a large-scale biomimetic application. Upscaling, especially the seamless roll-to-roll replication, is also explored. The book is designed to cover the entire workflow for a seamless lithographic sleeve.This new edition marks a substantial update of the previous edition, incorporating several new chapters. It is an important resource for materials scientists and engineers working in the areas of micro- and nanofabrication. Comprehensively updated to include new techniques, processes, and variables that have come to prominence in recent years Includes new chapters that address monitoring, properties of molded parts, 3D thermoforming, hot pulling, functional materials, smart surfaces, and upscaling by roll-2-roll Discusses the entire microreplication process, from theory and processes to technology and mold to surface-oriented applications

Download or read book NMR micro detectors tailored for multinuclear and electrochemistry lab on a chip applications written by Davoodi, Hossein and published by KIT Scientific Publishing. This book was released on 2022-01-14 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work offers three solutions tailored to specific applications to overcome NMR challenges in the micro-domain. As the first sub-topic of this work, different potential electrode designs, compatible with NMR technique, are suggested and experimentally evaluated. As the second focus point, this work tackles multinuclear detection challenges. In parallel, a low-cost, broadband insert is discussed to enhance the sensitivity of standard NMR coils when a small sample volume is available.

Download or read book Innovative micro NMR MRI functionality utilizing flexible electronics and control systems written by Nassar, Omar and published by KIT Scientific Publishing. This book was released on 2023-08-15 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: The advantages offered by the flexible electronics and control systems technologies were utilized for tackling the challenges facing two crucial Magnetic Resonance (MR) applications. The first application is in the field of interventional Magnetic Resonance Imaging (MRI), and the other application is in the field of Nuclear Magnetic Resonance spectroscopy (NMR).

Download or read book Bioinspired Superhydrophobic Nano and Microstructured Surfaces for Drag Reduction and Optoelectronics written by Felix Vüllers and published by KIT Scientific Publishing. This book was released on 2018-08-30 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt: Inspired by superhydrophobic leaves of water plants, a flexible superhydrophobic self-cleaning, transparent thin polymeric nanofur film was fabricated through highly scalable hot embossing and hot pulling techniques. Nanofur can retain an air film underwater, whose stability against external stimuli such as high pressure and movement through fluids is investigated. Additionally, the optical properties of nanofur are investigated and exploited to enhance the efficiency of optoelectronic devices.

Download or read book Advanced Elastocaloric Cooling Devices Based on Shape Memory Alloy Films written by Brüderlin, Florian and published by KIT Scientific Publishing. This book was released on 2022-11-15 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: Elastocaloric cooling is an emerging solid-state cooling technology with the potential to provide environmentally friendly, efficient cooling. The elastocaloric effect in superelastic shape memory alloy films is used to develop advanced cooling devices for small-scale applications. Cascaded and parallelized devices are developed to increase device temperature span and cooling capacity. The concepts are proven experimentally, a maximum temperature span of 27° C is achieved in a cascaded device.

Download or read book Photon upconversion heterostructures made from surface anchored metal organic frameworks written by Oldenburg, Michael and published by KIT Scientific Publishing. This book was released on 2019-01-22 with total page 179 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Power Generation by Resonant Self Actuation written by Joseph, Joel and published by KIT Scientific Publishing. This book was released on 2023-12-28 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: Die Forschung im Bereich der Mikro-Energiegewinnungssysteme wurde durch den Bedarf an autarken, stabilen Energiequellen für vernetzte drahtlose Sensoren vorangetrieben. Abwärme, insbesondere bei Temperaturen unter 200 °C, stellt eine vielversprechende, aber mit den derzeitigen Umwandlungstechnologien schwer zu gewinnende Energiequelle dar. - Research into micro energy harvesting systems has been driven by the need for self-sustaining, stable power sources for interconnected wireless sensors. Waste heat, particularly at temperatures below 200 °C, presents a promising but challenging energy source to recover using current conversion technology.

Download or read book Novel MRI Technologies for Structural and Functional Imaging of Tissues with Ultra short T Values written by Oezen, Ali Caglar and published by KIT Scientific Publishing. This book was released on 2017-06-30 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book X ray optics made by X ray lithography Process optimization and quality control written by Koch, Frieder Johannes and published by KIT Scientific Publishing. This book was released on 2017-10-16 with total page 170 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book In Situ Characterization and Modelling of Drying Dynamics for Scalable Printing of Hybrid Perovskite Photovoltaics written by Ternes, Simon and published by KIT Scientific Publishing. This book was released on 2023-03-27 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hybrid perovskite photovoltaics could play a vital role in future’s renewable energy production. However, there are still severe challenges when scaling the technology. In this work, perovskite solution films drying in laminar and slot-jet air flows are investigated extensively by optical in situ characterization. The main results are a quantitative model of perovskite drying dynamics and a novel in situ imaging technique – yielding valuable predictions for large-scale perovskite fabrication.

Download or read book Microfluidic Devices for Biomedical Applications written by Xiujun (James) Li and published by Woodhead Publishing. This book was released on 2021-08-05 with total page 724 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microfluidic Devices for Biomedical Applications, Second Edition provides updated coverage on the fundamentals of microfluidics, while also exploring a wide range of medical applications. Chapters review materials and methods, microfluidic actuation mechanisms, recent research on droplet microfluidics, applications in drug discovery and controlled-delivery, including micro needles, consider applications of microfluidic devices in cellular analysis and manipulation, tissue engineering and their role in developing tissue scaffolds, and cover the applications of microfluidic devices in diagnostic sensing, including genetic analysis, low-cost bioassays, viral detection, and radio chemical synthesis. This book is an essential reference for medical device manufacturers, scientists and researchers concerned with microfluidics in the field of biomedical applications and life-science industries. Discusses the fundamentals of microfluidics or lab-on-a-chip (LOC) and explores a wide range of medical applications Considers materials and methods for microfabrication, microfluidic actuation mechanisms and digital microfluidic technologies Details applications of microfluidic devices in cellular analysis and manipulation, tissue engineering and its role in developing tissue scaffolds, and stem cell engineering

Download or read book Biomedical Applications of Microfluidic Devices written by Michael R. Hamblin and published by Academic Press. This book was released on 2020-11-12 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biomedical Applications of Microfluidic Devices introduces the subject of microfluidics and covers the basic principles of design and synthesis of actual microchannels. The book then explores how the devices are coupled to signal read-outs and calibrated, including applications of microfluidics in areas such as tissue engineering, organ-on-a-chip devices, pathogen identification, and drug/gene delivery. This book covers high-impact fields (microarrays, organ-on-a-chip, pathogen detection, cancer research, drug delivery systems, gene delivery, and tissue engineering) and shows how microfluidics is playing a key role in these areas, which are big drivers in biomedical engineering research. This book addresses the fundamental concepts and fabrication methods of microfluidic systems for those who want to start working in the area or who want to learn about the latest advances being made. The subjects covered are also an asset to companies working in this field that need to understand the current state-of-the-art. The book is ideal for courses on microfluidics, biosensors, drug targeting, and BioMEMs, and as a reference for PhD students. The book covers the emerging and most promising areas of biomedical applications of microfluidic devices in a single place and offers a vision of the future. Covers basic principles and design of microfluidics devices Explores biomedical applications to areas such as tissue engineering, organ-on-a-chip, pathogen identification, and drug and gene delivery Includes chemical applications in organic and inorganic chemistry Serves as an ideal text for courses on microfluidics, biosensors, drug targeting, and BioMEMs, as well as a reference for PhD students

Download or read book Microfluidic Technologies for Human Health written by Utkan Demirci and published by World Scientific. This book was released on 2012 with total page 495 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ch. 1. A microscale bioinspired cochlear-like sensor / Robert D. White, Robert Littrell, and Karl Grosh -- ch. 2. Systematic evaluation of the efficiencies of proteins and chemicals in pharmaceutical applications / Morgan Hamon and Jong Wook Hong -- ch. 3. Microfluidic glucose sensors / Jithesh V. Veetil [und weitere] -- ch. 4. Applications of microfabrication and microfluidic techniques in mesenchymal stem cell research / Abhijit Majumder [und weitere] -- ch. 5. Patient-specific modeling of low-density lipoprotein transport in coronary arteries / Ufuk Olgac -- ch. 6. Point-of-care microdevices for global health diagnostics of infectious diseases / Sau Yin Chin [und weitere] -- ch. 7. Integrated microfluidic sample preparation for chip-based molecular diagnostics / Jane Y. Zhang [und weitere] -- ch. 8. Microfluidic devices for cellular proteomic studies / Yihong Zhan and Chang Lu -- ch. 9. Microfluidics for neuroscience: novel tools and future implications / Vivian M. Hernandez and P. Hande Ozdinler -- ch. 10. Microfluidics: on-chip platforms as in vitro disease models / Shan Gao, Erkin Seker, and Martin L. Yarmush -- ch. 11. Application of microfluidics in stem cell and tissue engineering / Sasha H. Bakhru, Christopher Highley, and Stefan Zappe -- ch. 12. Microfluidic "on-the-fly" fabrication of microstructures for biomedical applications / Edward Kang, Sau Fung Wong, and Sang-Hoon Lee -- ch. 13. Microfluidics as a promising tool toward distributed viral detection / Elodie Sollier and Dino Di Carlo -- ch. 14. Electrophoresis and dielectrophoresis for lab-on-a-chip (LOC) analyses / Yagmur Demircan, Gurkan Yilmaz, and Haluk Kulah -- ch. 15. Ultrasonic embossing of carbon nanotubes for the fabrication of polymer microfluidic chips for DNA sample purification / Puttachat Khuntontong, Min Gong, and Zhiping Wang -- ch. 16. Ferrofluidics / A. Rezzan Kose and Hur Koser -- ch. 17. Antibody-based blood bioparticle capture and separation using microfluidics for global health / ZhengYuan Luo [und weitere] -- ch. 18. Applications of quantum dots for fluorescence imaging in biomedical research / ShuQi Wang [und weitere]

Download or read book Microfluidics for Biological Applications written by Wei-Cheng Tian and published by Springer Science & Business Media. This book was released on 2009-03-02 with total page 429 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microfluidics for Biological Applications provides researchers and scientists in the biotechnology, pharmaceutical, and life science industries with an introduction to the basics of microfluidics and also discusses how to link these technologies to various biological applications at the industrial and academic level. Readers will gain insight into a wide variety of biological applications for microfluidics. The material presented here is divided into four parts, Part I gives perspective on the history and development of microfluidic technologies, Part II presents overviews on how microfluidic systems have been used to study and manipulate specific classes of components, Part III focuses on specific biological applications of microfluidics: biodefense, diagnostics, high throughput screening, and tissue engineering and finally Part IV concludes with a discussion of emerging trends in the microfluidics field and the current challenges to the growth and continuing success of the field.

Download or read book Applications of Microfluidic Systems in Biology and Medicine written by Manabu Tokeshi and published by Springer. This book was released on 2019-04-25 with total page 387 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on state-of-the-art microfluidic research in medical and biological applications. The top-level researchers in this research field explain carefully and clearly what can be done by using microfluidic devices. Beginners in the field —undergraduates, engineers, biologists, medical researchers—will easily learn to understand microfluidic-based medical and biological applications. Because a wide range of topics is summarized here, it also helps experts to learn more about fields outside their own specialties. The book covers many interesting subjects, including cell separation, protein crystallization, single-cell analysis, cell diagnosis, point-of-care testing, immunoassay, embyos/worms on a chip and organ-on-a-chip. Readers will be convinced that microfluidic devices have great potential for medical and biological applications.