Download or read book Micro and Nanobubbles written by Hideki Tsuge and published by CRC Press. This book was released on 2014-08-04 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microbubbles and nanobubbles have several characteristics that are comparable with millimeter- and centimeter-sized bubbles. These characteristics are their small size, which results in large surface area and high bioactivity, low rising velocity, decreased friction drag, high internal pressure, large gas dissolution capacity, negatively charged surface, and ability to be crushed and form free radicals. Microbubbles and nanobubbles have found applications in a variety of fields such as engineering, agriculture, environment, food, and medicine. Microbubbles have been successfully used in aquacultures of oysters in Hiroshima, scallops in Hokkaido, and pearls in Mie Prefecture, Japan. This field has shown a strong potential for growth. This book comprehensively discusses microbubbles and nanobubbles and their application in aquaculture, environment, engineering, medicine, stock raising, agriculture, and marine industry. It presents their potential as a new technology that can be utilized globally.

Download or read book Micro and Nanobubbles written by Hideki Tsuge and published by CRC Press. This book was released on 2014-08-04 with total page 375 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microbubbles and nanobubbles have several characteristics that are comparable with millimeter- and centimeter-sized bubbles. These characteristics are their small size, which results in large surface area and high bioactivity, low rising velocity, decreased friction drag, high internal pressure, large gas dissolution capacity, negatively charged su

Download or read book Ultrafine Bubbles written by Koichi Terasaka and published by CRC Press. This book was released on 2021-09-15 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ultrafine bubbles (UFBs) are gas-filled bubbles with a diameter smaller than 1 μm. They are sometimes called bulk nanobubbles because these are not on a solid surface but inside a bulk liquid (water). They are already being used in commercial processes such as cleaning and plant cultivation. However, many mysteries still exist with respect to UFBs, such as mechanisms of stability, OH radical formation, and biological and medical effects. This is the first book on UFBs that reviews research done on them. It is helpful for those interested in the fundamentals of this emerging field and its applications, including cleaning, biological, medical, and dental students and researchers.

Download or read book Drops and Bubbles in Contact with Solid Surfaces written by Michele Ferrari and published by CRC Press. This book was released on 2016-04-19 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: The third volume in a series dedicated to colloids and interfaces, Drops and Bubbles in Contact with Solid Surfaces presents an up-to-date overview of the fundamentals and applications of drops and bubbles and their interaction with solid surfaces. The chapters cover the theoretical and experimental aspects of wetting and wettability, liquid-solid

Download or read book Proceedings of the International Conference of Mechatronics and Cyber MixMechatronics 2017 written by Gheorghe I. Gheorghe and published by Springer. This book was released on 2017-08-07 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: This first edition of conference Proceedings reflects the expansion of the field of Mechatronics, which has now taken its place in the world of newer transdisciplinary fields of Adaptronics, Integronics, and Cyber-Mix Mechatronics. It presents state-of-the art advances in Mechatronics, Adaptronics, Integronics and Cyber-Mix-Mechatronics. The 1st International Conference of Mechatronics and Cyber-MixMechatronics/ICOMECYME was organized by the National Institute of R&D in Mechatronics and Measurement Technique in Bucharest (Romania), on September 7th–8th, 2017 and attracted specialists from all over the world—including North America, South America, and Asia. In addition to presenting research results, ICOMECYME also offered a forum for exchange between R&D experts.

Download or read book Micro and Nanoscale Fluid Mechanics written by Brian J. Kirby and published by Cambridge University Press. This book was released on 2010-07-26 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text focuses on the physics of fluid transport in micro- and nanofabricated liquid-phase systems, with consideration of gas bubbles, solid particles, and macromolecules. This text was designed with the goal of bringing together several areas that are often taught separately - namely, fluid mechanics, electrodynamics, and interfacial chemistry and electrochemistry - with a focused goal of preparing the modern microfluidics researcher to analyse and model continuum fluid mechanical systems encountered when working with micro- and nanofabricated devices. This text serves as a useful reference for practising researchers but is designed primarily for classroom instruction. Worked sample problems are included throughout to assist the student, and exercises at the end of each chapter help facilitate class learning.

Download or read book Application of Nanotechnology in Mining Processes written by Elvis Fosso-Kankeu and published by John Wiley & Sons. This book was released on 2022-01-31 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: b”Application of Nanotechnology in Mining ProcessesNanotechnology has revolutionized processes in many industries but its application in the mining industry has not been widely discussed. This unique book provides an overview of the successful implementation of nanotechnology in some of the key environmental and beneficiation mining processes. This book explores extensively the potential of nanotechnology to revolutionize the mining industry which has been relying for a very long on processes with limited efficiencies. The nine specialized chapters focus on applying nanoflotation to improve mineral processing, effective extraction of metals from leachates or pregnant solutions using nanoscale supramolecular hosts, and development of nano-adsorbents or nano-based strategies for the remediation or valorization of AMD. The application of nanotechnology in mining has so far received little attention from the industry and researchers and this groundbreaking book features critical issues so far under-reported in the literature: Application of nanotechnology in mineral processing for the enhancement of froth flotation Development of smart nanomaterials and application for the treatment of acid mine drainage Recovery of values from pregnant solutions using nanoadsorbents Valorization of AMD through formation of multipurpose nanoproducts. Audience Industrial interest will be from mining plant operators, environmental managers, water treatment plants managers, and operators. Researchers in nanotechnology, environmental science, mining, and metallurgy engineering will find the book valuable, as will government entities such as regulatory bodies officers and environmentalists.

Download or read book Nanopharmaceutical Advanced Delivery Systems written by Vivek Dave and published by John Wiley & Sons. This book was released on 2020-12-29 with total page 467 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book provides a single volume covering detailed descriptions about various delivery systems, their principles and how these are put in use for the treatment of multiple diseases. It is divided into four sections where the first section deals with the introduction and importance of novel drug delivery system. The second section deals with the most advanced drug delivery systems like microbubbles, dendrimers, lipid-based nanoparticles, nanofibers, microemulsions etc., describing the major principles and techniques of the preparations of the drug delivery systems. The third section elaborates on the treatments of diverse diseases like cancer, topical diseases, tuberculosis etc. The fourth and final section provides a brief informative description about the regulatory aspects of novel drug delivery system that is followed in various countries.

Download or read book Analytical Techniques in the Pharmaceutical Sciences written by Anette Müllertz and published by Springer. This book was released on 2016-08-30 with total page 829 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this book is to present a range of analytical methods that can be used in formulation design and development and focus on how these systems can be applied to understand formulation components and the dosage form these build. To effectively design and exploit drug delivery systems, the underlying characteristic of a dosage form must be understood--from the characteristics of the individual formulation components, to how they act and interact within the formulation, and finally, to how this formulation responds in different biological environments. To achieve this, there is a wide range of analytical techniques that can be adopted to understand and elucidate the mechanics of drug delivery and drug formulation. Such methods include e.g. spectroscopic analysis, diffractometric analysis, thermal investigations, surface analytical techniques, particle size analysis, rheological techniques, methods to characterize drug stability and release, and biological analysis in appropriate cell and animal models. Whilst each of these methods can encompass a full research area in their own right, formulation scientists must be able to effectively apply these methods to the delivery system they are considering. The information in this book is designed to support researchers in their ability to fully characterize and analyze a range of delivery systems, using an appropriate selection of analytical techniques. Due to its consideration of regulatory approval, this book will also be suitable for industrial researchers both at early stage up to pre-clinical research.

Download or read book Nanoscience written by Victor M. Starov and published by CRC Press. This book was released on 2011-06-03 with total page 1610 pages. Available in PDF, EPUB and Kindle. Book excerpt: The common perception is that nanoscience is something entirely new, that it sprung forth whole and fully formed like some mythological deity. But the truth is that like all things scientific, nanoscience is the natural result of the long evolution of scientific inquiry. Following a historical trail back to the middle of the 19th century, nanoscience is the inborn property of colloid and interface science. What’s important today is for us to recognize that nanoparticles are small colloidal objects. It should also be appreciated that over the past decades, a number of novel nanostructures have been developed, but whatever we call them, we cannot forget that their properties and behavior are still in the realm of colloid and interface science. However one views it, the interest and funding in nano-science is a tremendous opportunity to advance critical research in colloid chemistry. Nanoscience: Colloidal and Interfacial Aspects brings together a prominent roster of 42 leading investigators and their teams, who detail the wide range of theoretical and experimental knowledge that can be successfully applied for investigating nanosystems, many of which are actually well-known colloidal systems. This international grouping of pioneering investigators from academia and industry use these pages to provide researchers of today and tomorrow with a full examination of nano-disperse colloids, homogeneous and heterogeneous nano-structured materials (and their properties), and shelf-organization at the nano-scale. This cutting-edge reference provides information on investigations into non-linear electrokinetic phenomena in nano-sized dispersions and nano-sized biological systems. It discusses application aspects of technological processes in great detail, providing scientists and engineers across all fields with authoritative commentary on colloid and interface science operating at the nanoscale. Nano-Science: Colloidal and Interfacial Aspects provides an authoritative resource for those wanting to familiarize themselves with current progress as well as for those looking to make their own impact on the development of new technologies and practical applications in fields as diverse as medicine, materials, and environmental science to name but a few. Whether you call the technology nano or colloids, the field continues to be ripe with opportunity.

Download or read book The Encyclopedia of Physics written by Robert Martin Besançon and published by Van Nostrand Reinhold Company. This book was released on 1974 with total page 1096 pages. Available in PDF, EPUB and Kindle. Book excerpt: Concise, signed articles--most of them including bibliographic references--on physics in general, its major areas, divisions, and subdivisions as well as related topics such as astrophysics, geophysics, and biophysics. Intended for physicists who need information outside their special field of interest, librarians, teachers, engineers, and other scientists "who encounter physical concepts in pursuit of their profession."--Pref. As a rule, the technical level of the writing is higher for the more specialized areas than for the general topics. Useful cross references. Indexed. Published 1974.

Download or read book Mechanical Behavior of Concrete written by Jean-Michel Torrenti and published by John Wiley & Sons. This book was released on 2013-03-01 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: This title provides a comprehensive overview of all aspects of the mechanical behavior of concrete, including such features as its elastoplasticity, its compressive and tensile strength, its behavior over time (including creep and shrinkage, cracking and fatigue) as well as modeling techniques and its response to various stimuli. As such, it will be required reading for anyone wishing to increase their knowledge in this area.

Download or read book Nanoparticle Technology Handbook written by Masuo Hosokawa and published by Elsevier. This book was released on 2007-10-19 with total page 645 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanoparticle technology, which handles the preparation, processing, application and characterisation of nanoparticles, is a new and revolutionary technology. It becomes the core of nanotechnology as an extension of the conventional Fine Particle / Powder Technology. Nanoparticle technology plays an important role in the implementation of nanotechnology in many engineering and industrial fields including electronic devices, advanced ceramics, new batteries, engineered catalysts, functional paint and ink, Drug Delivery System, biotechnology, etc.; and makes use of the unique properties of the nanoparticles which are completely different from those of the bulk materials. This new handbook is the first to explain complete aspects of nanoparticles with many application examples showing their advantages and advanced development. There are handbooks which briefly mention the nanosized particles or their related applications, but no handbook describing the complete aspects of nanoparticles has been published so far. The handbook elucidates of the basic properties of nanoparticles and various nanostructural materials with their characterisation methods in the first part. It also introduces more than 40 examples of practical and potential uses of nanoparticles in the later part dealing with applications. It is intended to give readers a clear picture of nanoparticles as well as new ideas or hints on their applications to create new materials or to improve the performance of the advanced functional materials developed with the nanoparticles. * Introduces all aspects of nanoparticle technology, from the fundamentals to applications. * Includes basic information on the preparation through to the characterization of nanoparticles from various viewpoints * Includes information on nanostructures, which play an important role in practical applications.

Download or read book Nanopharmaceuticals Principles and Applications Vol 3 written by Vinod Kumar Yata and published by Springer Nature. This book was released on 2020-08-19 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the third volume on this subject and focuses on the recent advances of nanopharmaceuticals in cancer, dental, dermal and drug delivery applications and presents their safety, toxicity and therapeutic efficacy. The book also includes the transport phenomenon of nanomaterials and important pathways for drug delivery applications. It goes on to explain the toxicity of nanoparticles to different physiological systems and methods used to assess this for different organ systems using examples of in vivo systems.

Download or read book Ultrasound Imaging and Therapy written by Aaron Fenster and published by Taylor & Francis. This book was released on 2015-05-08 with total page 331 pages. Available in PDF, EPUB and Kindle. Book excerpt: Up-to-Date Details on Using Ultrasound Imaging to Help Diagnose Various DiseasesDue to improvements in image quality and the reduced cost of advanced features, ultrasound imaging is playing a greater role in the diagnosis and image-guided intervention of a wide range of diseases. Ultrasound Imaging and Therapy highlights the latest advances in usin

Download or read book Treatise on Water Science written by Peter A. Wilderer and published by IWA Publishing. This book was released on 2011-02-15 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Treatise on Water Science, Four-Volume Set Available online and in print for a limited time Water quality and management are of great significance globally, as the demand for clean, potable water far exceeds the availability. Water science research brings together the natural and applied sciences, engineering, chemistry, law and policy, and economics. The Treatise on Water Science seeks to unite these areas through contributions from a global team of author-experts. The work examines topics in depth, with an emphasis on innovative research and technologies for those working in applied areas. Development partnership with and endorsement from the International Water Association (IWA) demonstrates the authority of the content. Editor-in-Chief: Peter Wilderer, a Stockholm Water Prize recipient, has assembled a world-class team of contributors, ensuring market reach across all related sciences and a global approach to the subject. Topics related to resource management, water quality and supply, and handling of wastewater are treated in depth with up to 30 pages of coverage per topic, relative to a handful of pages per topic in comparable reference works. To buy from Elsevier, visit: http://store.elsevier.com/product.jsp?isbn=9780444531933&dmnum=CWS1 Co-Published with Elsevier

Download or read book Drying Technologies for Biotechnology and Pharmaceutical Applications written by Satoshi Ohtake and published by John Wiley & Sons. This book was released on 2020-06-02 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive source of information about modern drying technologies that uniquely focus on the processing of pharmaceuticals and biologicals Drying technologies are an indispensable production step in the pharmaceutical industry and the knowledge of drying technologies and applications is absolutely essential for current drug product development. This book focuses on the application of various drying technologies to the processing of pharmaceuticals and biologicals. It offers a complete overview of innovative as well as standard drying technologies, and addresses the issues of why drying is required and what the critical considerations are for implementing this process operation during drug product development. Drying Technologies for Biotechnology and Pharmaceutical Applications discusses the state-of-the-art of established drying technologies like freeze- and spray- drying and highlights limitations that need to be overcome to achieve the future state of pharmaceutical manufacturing. The book also describes promising next generation drying technologies, which are currently used in fields outside of pharmaceuticals, and how they can be implemented and adapted for future use in the pharmaceutical industry. In addition, it deals with the generation of synergistic effects (e.g. by applying process analytical technology) and provides an outlook toward future developments. -Presents a full technical overview of well established standard drying methods alongside various other drying technologies, possible improvements, limitations, synergies, and future directions -Outlines different drying technologies from an application-oriented point of view and with consideration of real world challenges in the field of drug product development -Edited by renowned experts from the pharmaceutical industry and assembled by leading experts from industry and academia Drying Technologies for Biotechnology and Pharmaceutical Applications is an important book for pharma engineers, process engineers, chemical engineers, and others who work in related industries.