Download or read book Methods for Real Time Measurement of THMs and HAAs in Distribution Systems Part 2 written by and published by American Water Works Association. This book was released on 2007 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this project researchers developed a practical, low-cost chemical analyzer for real-time monitoring of trihalomethanes (THMs) and haloacetic acids (HAAs) in drinking water distribution systems. THMs and HAAs are possibly harmful to humans if ingested. For this reason the US Environmental Protection Agency established maximum contaminant levels. Future regulations might lower the MCL of these substances. Real-time monitoring of THMs and HAAs will become necessary for future regulatory compliance.
Download or read book Methods for Real time Monitoring of THMs and HAAs in Drinking Water Distribution Systems part 2 written by and published by . This book was released on 2007 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The overall goal of this research was to develop chemical analyzers and associated analytical methods for online monitoring of THM and HAA concentrations directly from drinking water distribution systems.
Download or read book Installation Condition Assessment and Reliability of Service Lines written by Yann Le Gouellec De Schwarz and published by American Water Works Association. This book was released on 2007 with total page 68 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this project researchers developed a practical, low-cost chemical analyzer for real-time monitoring of trihalomethanes (THMs) and haloacetic acids (HAAs) in drinking water distribution systems. THMs and HAAs are possibly harmful to humans if ingested. For this reason the US Environmental Protection Agency established maximum contaminant levels. Future regulations might lower the MCL of these substances. Real-time monitoring of THMs and HAAs will become necessary for future regulatory compliance.(Part 1: ISBN
Download or read book Disinfection By products in Drinking Water written by K. Clive Thompson and published by Royal Society of Chemistry. This book was released on 2016 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering the latest developments in themes related to water disinfection by-products, this book brings the academic and industry researchers right up to date.
Download or read book Drinking Water Distribution Systems written by National Research Council and published by National Academies Press. This book was released on 2006-12-22 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: Protecting and maintaining water distributions systems is crucial to ensuring high quality drinking water. Distribution systems-consisting of pipes, pumps, valves, storage tanks, reservoirs, meters, fittings, and other hydraulic appurtenances-carry drinking water from a centralized treatment plant or well supplies to consumers' taps. Spanning almost 1 million miles in the United States, distribution systems represent the vast majority of physical infrastructure for water supplies, and thus constitute the primary management challenge from both an operational and public health standpoint. Recent data on waterborne disease outbreaks suggest that distribution systems remain a source of contamination that has yet to be fully addressed. This report evaluates approaches for risk characterization and recent data, and it identifies a variety of strategies that could be considered to reduce the risks posed by water-quality deteriorating events in distribution systems. Particular attention is given to backflow events via cross connections, the potential for contamination of the distribution system during construction and repair activities, maintenance of storage facilities, and the role of premise plumbing in public health risk. The report also identifies advances in detection, monitoring and modeling, analytical methods, and research and development opportunities that will enable the water supply industry to further reduce risks associated with drinking water distribution systems.
Download or read book Fiscal Year 1999 EPA R D Budget Authorization written by United States. Congress. House. Committee on Science. Subcommittee on Energy and Environment and published by . This book was released on 1998 with total page 1434 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fiscal Year 2001 Budget Authorization Request written by United States. Congress. House. Committee on Science. Subcommittee on Energy and Environment and published by . This book was released on 2001 with total page 1612 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book EPA Publications Bibliography written by United States. Environmental Protection Agency and published by . This book was released on 1994 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Drinking Water Distribution Systems written by National Research Council and published by National Academies Press. This book was released on 2007-01-22 with total page 405 pages. Available in PDF, EPUB and Kindle. Book excerpt: Protecting and maintaining water distributions systems is crucial to ensuring high quality drinking water. Distribution systems-consisting of pipes, pumps, valves, storage tanks, reservoirs, meters, fittings, and other hydraulic appurtenances-carry drinking water from a centralized treatment plant or well supplies to consumers' taps. Spanning almost 1 million miles in the United States, distribution systems represent the vast majority of physical infrastructure for water supplies, and thus constitute the primary management challenge from both an operational and public health standpoint. Recent data on waterborne disease outbreaks suggest that distribution systems remain a source of contamination that has yet to be fully addressed. This report evaluates approaches for risk characterization and recent data, and it identifies a variety of strategies that could be considered to reduce the risks posed by water-quality deteriorating events in distribution systems. Particular attention is given to backflow events via cross connections, the potential for contamination of the distribution system during construction and repair activities, maintenance of storage facilities, and the role of premise plumbing in public health risk. The report also identifies advances in detection, monitoring and modeling, analytical methods, and research and development opportunities that will enable the water supply industry to further reduce risks associated with drinking water distribution systems.
Download or read book On site Generation of Hypochlorite written by American Water Works Association and published by . This book was released on 2014-10 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: As more water systems turn to safer alternatives to chlorine gas, the generation of hypochlorite on site has become increasingly common. M65, On-Site Generation of Hypochlorite, presents the principles of on-site generation (OSG), the differences between low-strength and high-strength OSG systems, and the subsequent impact each of these systems has on design, construction, and maintenance for water and wastewater utilities. M65 provides operators and engineering staff with a basic understanding of how to design and install both low- and high-strength OSG systems, how they work, and how they compare with other popular forms of chlorine currently on the market. A cost analysis and an examination of how OSG affects disinfection by-product formation are also included. This manual should help operators, planners, management, and engineers improve their decision-making processes about OSG systems using a holistic risk management approach that considers not only triple-bottom-line approaches but also the specific regional situation when choosing a chlorination system.
Download or read book Online Monitoring for Drinking Water Utilities written by CRS PROAQUA. and published by American Water Works Association. This book was released on 2002 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discussions in this book center on proper management for quantity and quality of drinking water based on sophisticated surveillance and communication systems that help water utilities manage, treat, and deliver drinking water to consumers.
Download or read book Watershed Management for Potable Water Supply written by National Research Council and published by National Academies Press. This book was released on 2000-02-17 with total page 569 pages. Available in PDF, EPUB and Kindle. Book excerpt: In 1997, New York City adopted a mammoth watershed agreement to protect its drinking water and avoid filtration of its large upstate surface water supply. Shortly thereafter, the NRC began an analysis of the agreement's scientific validity. The resulting book finds New York City's watershed agreement to be a good template for proactive watershed management that, if properly implemented, will maintain high water quality. However, it cautions that the agreement is not a guarantee of permanent filtration avoidance because of changing regulations, uncertainties regarding pollution sources, advances in treatment technologies, and natural variations in watershed conditions. The book recommends that New York City place its highest priority on pathogenic microorganisms in the watershed and direct its resources toward improving methods for detecting pathogens, understanding pathogen transport and fate, and demonstrating that best management practices will remove pathogens. Other recommendations, which are broadly applicable to surface water supplies across the country, target buffer zones, stormwater management, water quality monitoring, and effluent trading.
Download or read book Disinfection By products in Drinking Water written by M.N.V. Prasad and published by Butterworth-Heinemann. This book was released on 2020-03-06 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt: Disinfection Byproducts in Drinking Water: Detection and Treatment presents cutting-edge research on how to understand the procedures, processes and considerations for detecting and treating disinfection by-products from drinking water, swimming pool water, and wastewater. The book begins with an overview of the different groups of Disinfection Byproducts (DBPs), such as: Trihalomethanes (THM), Halo acetic acids, and Haloacetonitrile (HAN). This coverage is quickly followed by a clear and rigorous exposition of the latest methods and technologies for the characterization, occurrence, formation, transformation and removal of DBPs in drinking water. Other chapters focus on ultraviolet-visible spectroscopy, electron spin resonance, and gas chromatography-mass spectrometry. Researchers will find a valuable resource to a breath of topics for DBP detection and treatment, including various recent techniques, such as microfiltration, nanofiltration membrane and nanotechnology. Explains the latest research in detection, treatment processes and remediation technologies Includes sampling, analytical and characterization methods and approaches Covers cutting-edge research, including membrane based technologies, nanotechnology treatment technologies and bioremediation treatment technologies Provides background information regarding contamination sources
Download or read book Guidelines for Drinking water Quality written by World Health Organization and published by World Health Organization. This book was released on 1993 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume describes the methods used in the surveillance of drinking water quality in the light of the special problems of small-community supplies, particularly in developing countries, and outlines the strategies necessary to ensure that surveillance is effective.
Download or read book Water Loss Assessment in Distribution Networks written by Taha M. Al-Washali and published by CRC Press. This book was released on 2021-06-08 with total page 197 pages. Available in PDF, EPUB and Kindle. Book excerpt: Water utilities worldwide lose 128 billion cubic meters annually, causing annual monetary losses estimated at USD 40 billion. Most of these losses occur in developing countries (74%). This calls for rethinking the challenges facing water utilities in developing countries, foremost of which is the assessment of water losses in intermittent supply networks. Water loss assessment methods were originally developed in continuous supply systems, and their application in intermittently operated networks (in developing countries) is hindered by the widespread use of household water tanks and unauthorised consumption. This study provides an extensive review of existing methods and (software) tools for water loss assessment. In addition, several new methods were developed, which offer improved water loss assessment in intermittent supply. As the volume of water loss varies monthly and annually according to the amount of supplied water, this study proposes procedures to normalise the volume of water loss in order to enable water utilities to monitor and benchmark their performance on water loss management. The study also developed a novel method of estimating apparent losses using routine data of WWTP inflows, enabling future real-time monitoring of losses in networks. Different methods have also been suggested to estimate the unauthorised consumption in networks. This study found that minimum night flow analysis can still be applied in intermittent supply if an area of the network is supplied for several days. Furthermore, this study concluded that water meter performance is enhanced in intermittent supply conditions. However, continuous supply in the presence of float-valves significantly reduces the accuracy of water meters. Finally, this study provides guidance and highlights several knowledge gaps in order to improve the accuracy of water loss assessment in intermittent supply. Accurate assessment of water loss is a prerequisite for reliable leakage modelling and minimisation as well as planning for, and monitoring of water loss management in distribution networks.
Download or read book Architecture of Near Real time Monitoring Systems for Water Distribution Systems written by Sebastian Karl Friedrich Bögershausen and published by . This book was released on 2001 with total page 146 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Real Time Demand Estimation for Water Distribution Systems written by and published by . This book was released on 2008 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: The goal of a water distribution system (WDS) is to supply the desired quantity of fresh water to consumers at the appropriate time. In order to properly operate a WDS, system operators need information about the system states, such as tank water level, nodal pressure, and water quality for the system wide locations. Most water utilities now have some level of SCADA (Supervisory Control and Data Acquisition) systems providing nearly real-time monitoring data. However, due to the prohibitive metering costs and lack of applications for the data, only portions of systems are monitored and the use of the SCADA data is limited. This dissertation takes a comprehensive view of real-time demand estimation in water distribution systems. The goal is to develop an optimal monitoring system plan that will collect appropriate field data to determine accurate, precise demand estimates and to understand their impact on model predictions. To achieve that goal, a methodology for real-time demand estimates and associated uncertainties using limited number of field measurements is developed. Further, system wide nodal pressure and chlorine concentration and their uncertainties are predicted using the estimated nodal demands. This dissertation is composed of three journal manuscripts that address these three key steps beginning with uncertainty evaluation, followed by demand estimation and finally optimal metering layout. The uncertainties associated with the state estimates are quantified in terms of confidence limits. To compute the uncertainties in real-time alternative schemes that reduce computational efforts while providing good statistical approximations are evaluated and verified by Monte Carlo simulation (MCS). The first order second moment(FOSM) method provides accurate variance estimates for pressure; however, because of its linearity assumption it has limited predictive ability for chlorine under unsteady conditions. Latin Hypercube sampling (LHS) provides good estimates of prediction uncertainty for chlorine and pressure in steady and unsteady conditions with significantly less effort. For real-time demand estimation, two recursive state estimators; tracking state estimator (TSE) based on weighted least squares (WLS) scheme and Kalman filter (KF), are applied. In addition, in order to find available field data types for demand estimation, comparative studies are performed using pipe flow rate and nodal pressure head as measurements. To reduce the number of unknowns and make the system solvable, nodes with similar user characteristics are grouped and assumed to have same demand pattern. The uncertainties in state variables are quantified in terms of confidence limits using the approximate methods (i.e., FOSM and LHS). Results show that TSE with pipe flow rates as measurements provide reliable demand estimations. Also, the model predictions computed using the estimated demands match well with the synthetically generated true values. Field measurements are critical elements to obtaining quality real-time state estimates. However, the limited number of metering locations has been a significant obstacle for the real-time studies and identifying locations to best gain information is critical. Here, an optimal meter placement (OMP) is formulated as a multi-objective optimization problem and solved using a multi-objective genetic algorithm (MOGA) based on Pareto-optimal solutions. Results show that model accuracy and precision should be pursued at the same time as objectives since both measures have trade-off relationship. GA solutions were improvements over the less robust methods or designers' experienced judgment.