Download or read book Methodology and Tools for Distributed Debugging written by Bao Minh Dang and published by . This book was released on 1989 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Distributed Debugging An Integrated Approach written by Stephen Lesavich and published by Coconut Avenue, Inc.. This book was released on 1991-03-15 with total page 163 pages. Available in PDF, EPUB and Kindle. Book excerpt: The design and development of digital computer software for distributed concurrent programming environments has increased significantly in the past few years. The presence of remote processors and concurrency greatly complicates the creation, analysis, testing, and debugging of all software produced for these environments. It appears that few tools developed for sequential environments are adequate for debugging software programs in a distributed concurrent environment. The distributed concurrent environment also presents the need for special debugging tools that were not needed for sequential environments. This research will present a new model for debugging programs in a distributed concurrent programming environment. This new model was used to design, develop, and implement an integrated, cooperating set of concurrent debugging tools. The new debugging model and tool set were used in a distributed Concurrent C development environment running under the UNIX® operating system and connected by an Ethernet local area network. Actual results obtained from using the new debugging scheme and integrated debugging tool set to detect, locate, and correct software faults in distributed Concurrent C programs are also presented.
Download or read book Millipede written by Erik Helge Tribou and published by . This book was released on 2005 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Distributed Tracing in Practice written by Austin Parker and published by "O'Reilly Media, Inc.". This book was released on 2020-04-13 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since most applications today are distributed in some fashion, monitoring their health and performance requires a new approach. Enter distributed tracing, a method of profiling and monitoring distributed applications—particularly those that use microservice architectures. There’s just one problem: distributed tracing can be hard. But it doesn’t have to be. With this guide, you’ll learn what distributed tracing is and how to use it to understand the performance and operation of your software. Key players at LightStep and other organizations walk you through instrumenting your code for tracing, collecting the data that your instrumentation produces, and turning it into useful operational insights. If you want to implement distributed tracing, this book tells you what you need to know. You’ll learn: The pieces of a distributed tracing deployment: instrumentation, data collection, and analysis Best practices for instrumentation: methods for generating trace data from your services How to deal with (or avoid) overhead using sampling and other techniques How to use distributed tracing to improve baseline performance and to mitigate regressions quickly Where distributed tracing is headed in the future
Download or read book An Approach to Distributed Software Systems Debugging written by Dejan Srdjevic and published by . This book was released on 1987 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Computational Science ICCS 2001 written by Vassil N. Alexandrov and published by Springer. This book was released on 2003-05-15 with total page 1068 pages. Available in PDF, EPUB and Kindle. Book excerpt: LNCS volumes 2073 and 2074 contain the proceedings of the International Conference on Computational Science, ICCS 2001, held in San Francisco, California, May 27-31, 2001. The two volumes consist of more than 230 contributed and invited papers that reflect the aims of the conference to bring together researchers and scientists from mathematics and computer science as basic computing disciplines, researchers from various application areas who are pioneering advanced application of computational methods to sciences such as physics, chemistry, life sciences, and engineering, arts and humanitarian fields, along with software developers and vendors, to discuss problems and solutions in the area, to identify new issues, and to shape future directions for research, as well as to help industrial users apply various advanced computational techniques.
Download or read book Tutorials on Emerging Methodologies and Applications in Operations Research written by Harvey J. Greenberg and published by Springer Science & Business Media. This book was released on 2006-06-16 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume reflects the theme of the INFORMS 2004 Meeting in Denver: Back to OR Roots. Emerging as a quantitative approach to problem-solving in World War II, our founders were physicists, mathematicians, and engineers who quickly found peace-time uses. It is fair to say that Operations Research (OR) was born in the same incubator as computer science, and it has spawned many new disciplines, such as systems engineering, health care management, and transportation science. Although people from many disciplines routinely use OR methods, many scientific researchers, engineers, and others do not understand basic OR tools and how they can help them. Disciplines ranging from finance to bioengineering are the beneficiaries of what we do — we take an interdisciplinary approach to problem-solving. Our strengths are modeling, analysis, and algorithm design. We provide a quanti- tive foundation for a broad spectrum of problems, from economics to medicine, from environmental control to sports, from e-commerce to computational - ometry. We are both producers and consumers because the mainstream of OR is in the interfaces. As part of this effort to recognize and extend OR roots in future probl- solving, we organized a set of tutorials designed for people who heard of the topic and want to decide whether to learn it. The 90 minutes was spent addre- ing the questions: What is this about, in a nutshell? Why is it important? Where can I learn more? In total, we had 14 tutorials, and eight of them are published here.
Download or read book Middleware 2008 written by Valérie Issarny and published by Springer Science & Business Media. This book was released on 2008-11-24 with total page 443 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the ACM/IFIP/USENIX 9th International Middleware Conference 2008, held in Leuven, Belgium, in December 2008. The 21 revised full papers presented were carefully reviewed and selected from 117 submissions for inclusion in the book. The papers are organized in topical sections on platforms extended to new capabilities, advanced software engineering focusing on specific system properties, system management techniques, as well as components and system algorithms and properties.
Download or read book A Model and a Methodology for Distributed Debugging written by Ioakim Hamamtzoglou and published by . This book was released on 1989 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Hello Startup written by Yevgeniy Brikman and published by "O'Reilly Media, Inc.". This book was released on 2015-10-21 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the "Hello, World" tutorial for building products, technologies, and teams in a startup environment. It's based on the experiences of the author, Yevgeniy (Jim) Brikman, as well as interviews with programmers from some of the most successful startups of the last decade, including Google, Facebook, LinkedIn, Twitter, GitHub, Stripe, Instagram, AdMob, Pinterest, and many others. Hello, Startup is a practical, how-to guide that consists of three parts: Products, Technologies, and Teams. Although at its core, this is a book for programmers, by programmers, only Part II (Technologies) is significantly technical, while the rest should be accessible to technical and non-technical audiences alike. If you’re at all interested in startups—whether you’re a programmer at the beginning of your career, a seasoned developer bored with large company politics, or a manager looking to motivate your engineers—this book is for you.
Download or read book New Trends in Software Methodologies Tools and Techniques written by Hamido Fujita and published by IOS Press. This book was released on 2006 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: Software is the essential enabler for the new economy and science. It creates new markets and new directions for a more reliable, flexible, and robust society. It empowers the exploration of our world in ever more depth. However, software often falls short behind our expectations. Current software methodologies, tools and techniques remain expensive and not yet reliable for a highly changeable and evolutionary market. Many approaches have been proven only as case-by-case oriented methods. This book presents a number of new trends and theories in the direction in which we believe software science and engineering may develop to transform the role of software and science in tomorrow's information society. This publication is an attempt to capture the essence of a new state-of-art in software science and its supporting technology. It also aims at identifying the challenges such a technology has to master.
Download or read book Advanced Debugging Methods written by Raimondas Lencevicius and published by Springer Science & Business Media. This book was released on 2012-09-07 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: Object relationships in modern software systems are becoming increasingly numerous and complex, and program errors due to violations of object relationships are difficult to detect. Programmers need new tools that allow them to explore objects in a large system more efficiently and to detect broken object relationships instantaneously. Such tools incorporate approaches used in such areas as data visualization, pattern matching and extraction, database querying, active databases, and rule-based programming. The query-based debugging approach developed by the author of this book is another powerful yet efficient tool to be added to the developer's tool chest. Advanced Debugging Methods presents practice and tools for debugging computer programs. This book proposes new powerful approaches that simplify the daunting task of debugging complex software systems. Although debugging has been addressed in numerous research papers, many of its methods have yet to be explored in a book-length format. This book helps to fill this gap by presenting an overview of existing debugging tools with motivating examples and case studies, as well as presenting new, state-of-the-art debugging methods. Advanced Debugging Methods will be of use to software developers looking for tools to be applied in cutting edge practice; system architects looking at the relationship between software design and debugging; tools and programming language researchers looking for new ideas in run-time tool implementation as well as detailed descriptions of advanced implementations; and university professors and graduate students who will use this book as supplementary reading for graduate courses in programming tools, language implementation, and advanced object-oriented systems. Advanced Debugging Methods is also a handy reference of currently existing debugging methodologies as well as a springboard for cutting-edge research to simplify the difficult task of debugging and to facilitate the development of more robust software systems.
Download or read book Parallel Program Development for Cluster Computing written by José Cardoso Cunha and published by Nova Publishers. This book was released on 2001 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is divided into two parts, the first one covering the concepts and methodologies, and the second describing the tools and integrated environments that were developed in those projects. In this way, we hope that the reader will find the book useful not only concerning an identification of current trends in parallel program development, but also concerning their practical illustration through concrete tools and environments.
Download or read book UML Assisted Visual Debugging for Distributed Systems written by Benjamin R. Musial and published by . This book was released on 2003-03 with total page 112 pages. Available in PDF, EPUB and Kindle. Book excerpt: The DOD is developing a Joint Battlespace Infosphere, linking a large number of data sources and user applications. To assist in this process, debugging and analysis tools are required. Software debugging is an extremely difficult cognitive process requiring comprehension of the overall application behavior, along with detailed understanding of specific application components. This is further complicated with distributed systems by the addition of other programs, their large size and synchronization issues. Typical debuggers provide inadequate support for this process, focusing primarily on the details accessible through source code. To overcome this deficiency, this research links the dynamic program execution state to a Unified Modeling Language (UML) class diagram that is reverse-engineered from data accessed within the Java Platform Debug Architecture. This research uses focus + context, graph layout, and color encoding techniques to enhance the standard UML diagram. These techniques organize and present objects and events in a manner that facilitates analysis of system behavior. High-level abstractions commonly used in system design support debugging while maintaining access to low-level details with an interactive display. The user is also able to monitor the control flow through highlighting of the relevant object and method in the display.
Download or read book A Debugging Methodology written by Larry R. Fisher and published by . This book was released on 2002 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Distributed Debugging Tools for Heterogeneous Distributed Systems written by University of Massachusetts at Amherst. Department of Computer and Information Science and published by . This book was released on 1987 with total page 19 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Site Reliability Engineering written by Niall Richard Murphy and published by "O'Reilly Media, Inc.". This book was released on 2016-03-23 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: The overwhelming majority of a software system’s lifespan is spent in use, not in design or implementation. So, why does conventional wisdom insist that software engineers focus primarily on the design and development of large-scale computing systems? In this collection of essays and articles, key members of Google’s Site Reliability Team explain how and why their commitment to the entire lifecycle has enabled the company to successfully build, deploy, monitor, and maintain some of the largest software systems in the world. You’ll learn the principles and practices that enable Google engineers to make systems more scalable, reliable, and efficient—lessons directly applicable to your organization. This book is divided into four sections: Introduction—Learn what site reliability engineering is and why it differs from conventional IT industry practices Principles—Examine the patterns, behaviors, and areas of concern that influence the work of a site reliability engineer (SRE) Practices—Understand the theory and practice of an SRE’s day-to-day work: building and operating large distributed computing systems Management—Explore Google's best practices for training, communication, and meetings that your organization can use
