Download or read book Methodologies and New User Interfaces to Optimize Hydraulic Fracturing Design and Evaluate Fracturing Performance for Gas Wells written by Wenxin Wang and published by . This book was released on 2006 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis presents and develops efficient and effective methodologies for optimal hydraulic fracture design and fracture performance evaluation. These methods incorporate algorithms that simultaneously optimize all of the treatment parameters while accounting for required constraints. Damage effects, such as closure stress, gel damage and non-Darcy flow, are also considered in the optimal design and evaluation algorithms. Two user-friendly program modules, which are active server page (ASP) based, were developed to implement the utility of the methodologies. Case analysis was executed to demonstrate the workflow of the two modules. Finally, to validate the results from the two modules, results were compared to those from a 3D simulation program. The main contributions of this work are: An optimal fracture design methodology called unified fracture design (UFD)is presented and damage effects are considered in the optimal design calculation. As a by-product of UFD, a fracture evaluation methodology is proposed to conduct well stimulation performance evaluation. The approach is based on calculating and comparing the actual dimensionless productivity index of fractured wells with the benchmark which has been developed for optimized production. To implement the fracture design and evaluation methods, two web ASP based user interfaces were developed; one is called Frac Design (Screening), and the other is Frac Evaluation. Both modules are built to hold the following features. Friendly web ASP based user interface Minimum user inputo Proppant type and mesh size selection- Damage effects consideration options- Convenient on-line help.
Download or read book Optimization of Multistage Hydraulic Fracturing Treatment for Maximization of the Tight Gas Productivity written by Mengting Li and published by Cuvillier Verlag. This book was released on 2018-12-17 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydraulic fracturing is essential technology for the development of unconventional resources such as tight gas. So far, there are no numerical tools which can optimize the whole process from geological modeling, hydraulic fracturing until production simulation with the same 3D model with consideration of the thermo-hydro-mechanical coupling. In this dissertation, a workflow and a numerical tool chain were developed for design and optimization of multistage hydraulic fracturing in horizontal well regarding a maximum productivity of the tight gas wellbore. After the verification a full 3D reservoir model is generated based on a real tight gas field in the North German Basin. Through analysis of simulation results, a new calculation formula of FCD was proposed, which takes the proppant position and concentration into account and can predict the gas production rate more accurately. However, not only FCD but also proppant distribution and hydraulic connection of stimulated fractures to the well, geological structure and the interaction between fractures are determinant for the gas production volume. Through analysis the numerical results of sensitivity analysis and optimization variations, there is no unique criterion to determine the optimal number and spacing of the fractures, it should be analyzed firstly in detail to the actual situation and decided then from case to case.
Download or read book Optimization of Hydraulic Fracture Stages and Sequencing in Unconventional Formations written by Ahmed Alzahabi and published by CRC Press. This book was released on 2018-07-03 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: Shale gas and/or oil play identification is subject to many screening processes for characteristics such as porosity, permeability, and brittleness. Evaluating shale gas and/or oil reservoirs and identifying potential sweet spots (portions of the reservoir rock that have high-quality kerogen content and brittle rock) requires taking into consideration multiple rock, reservoir, and geological parameters that govern production. The early determination of sweet spots for well site selection and fracturing in shale reservoirs is a challenge for many operators. With this limitation in mind, Optimization of Hydraulic Fracture Stages and Sequencing in Unconventional Formations develops an approach to improve the industry’s ability to evaluate shale gas and oil plays and is structured to lead the reader from general shale oil and gas characteristics to detailed sweet-spot classifications. The approach uses a new candidate selection and evaluation algorithm and screening criteria based on key geomechanical, petrophysical, and geochemical parameters and indices to obtain results consistent with existing shale plays and gain insights on the best development strategies going forward. The work introduces new criteria that accurately guide the development process in unconventional reservoirs in addition to reducing uncertainty and cost.
Download or read book Hydraulic Fracturing in Unconventional Reservoirs written by Hoss Belyadi and published by Gulf Professional Publishing. This book was released on 2019-06-18 with total page 636 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydraulic Fracturing in Unconventional Reservoirs: Theories, Operations, and Economic Analysis, Second Edition, presents the latest operations and applications in all facets of fracturing. Enhanced to include today's newest technologies, such as machine learning and the monitoring of field performance using pressure and rate transient analysis, this reference gives engineers the full spectrum of information needed to run unconventional field developments. Covering key aspects, including fracture clean-up, expanded material on refracturing, and a discussion on economic analysis in unconventional reservoirs, this book keeps today's petroleum engineers updated on the critical aspects of unconventional activity. - Helps readers understand drilling and production technology and operations in shale gas through real-field examples - Covers various topics on fractured wells and the exploitation of unconventional hydrocarbons in one complete reference - Presents the latest operations and applications in all facets of fracturing
Download or read book Hydraulic Fracturing written by Michael Berry Smith and published by CRC Press. This book was released on 2015-12-16 with total page 793 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydraulic Fracturing effectively busts the myths associated with hydraulic fracturing. It explains how to properly engineer and optimize a hydraulically fractured well by selecting the right materials, evaluating the economic benefits of the project, and ensuring the safety and success of the people, environment, and equipment. From data estimation
Download or read book Handbook of Hydraulic Fracturing written by James G. Speight and published by John Wiley & Sons. This book was released on 2016-04-11 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents an up-to-date description of current and new hydraulic fracturing processes Details Emerging Technologies such as Fracture Treatment Design, Open Hole Fracturing, Screenless Completions, Sand Control, Fracturing Completions and Productivity Covers Environmental Impact issues including Geological Disturbance; Chemicals used in Fracturing; General Chemicals; Toxic Chemicals; and Air, Water, Land, and Health impacts Provides many process diagrams as well as tables of feedstocks and their respective products
Download or read book Hydraulic Fracturing Operations written by Nicholas P. Cheremisinoff and published by John Wiley & Sons. This book was released on 2015-03-16 with total page 792 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydraulic fracturing, commonly referred to as “fracking,” is a technique used by the oil and gas industry to mine hydrocarbons trapped deep beneath the Earth’s surface. The principles underlying the technology are not new. Fracking was first applied at the commercial level in the United States as early as 1947, and over the decades it has been applied in various countries including Canada, the UK, and Russia. The author worked with engineering teams as early as the mid-1970s in evaluating ways to improve oil recovery from this practice. By and large fracking was not an economically competitive process and had limited applications until the early 2000s. Several factors altered the importance of this technology, among them being significant technological innovations in drilling practices with impressive high tech tools for exploration, well construction and integrity, and recovery along with discoveries of massive natural gas reserves in the United States and other parts of the world. These factors have catapulted the application of the technology to what is best described as the gold rush of the 21st century, with exploration and natural gas plays proceeding at a pace that seemingly is unrivaled by any historical industrial endeavor. But this level of activity has invoked widespread criticism from concerned citizens and environmental groups in almost every nation across the Globe. This outstanding new volume offers the industry a handbook of environmental management practices that can mitigate risks to the environment and, through best practices and current technologies, to conform to the current standards and regulations that are in place to provide the world with the energy it needs while avoiding environmental damage. For the new hire, veteran engineer, and student alike, this is a one-of-a-kind volume, a must-have for anyone working in hydraulic fracturing.
Download or read book Emerging Technologies in Hydraulic Fracturing and Gas Flow Modelling written by Kenneth Imo-Imo Israel Eshiet and published by BoD – Books on Demand. This book was released on 2022-11-02 with total page 174 pages. Available in PDF, EPUB and Kindle. Book excerpt: Emerging Technologies in Hydraulic Fracturing and Gas Flow Modelling features the latest strategies for exploiting depleted and unconventional petroleum rock formations as well as simulating associated gas flow mechanisms. The book covers a broad range of multivarious stimulation methods currently applied in practice. It introduces new stimulation techniques including a comprehensive description of interactions between formation/hydraulic fracturing fluids and the host rock material. It provides further insight into practices aimed at advancing the operation of hydrocarbon reservoirs and can be used either as a standalone resource or in combination with other related literature. The book can serve as a propaedeutic resource and is appropriate for those seeking rudimentary information on the exploitation of ultra-impermeable oil and gas reservoirs. Professionals and researchers in the field of petroleum, civil, oil and gas, geotechnical and geological engineering who are interested in the production of unconventional petroleum resources as well as students undertaking studies in similar subject areas will find this to be an instructional reference.
Download or read book Mechanics of Hydraulic Fracturing written by Ching H. Yew and published by Gulf Professional Publishing. This book was released on 2014-09-25 with total page 245 pages. Available in PDF, EPUB and Kindle. Book excerpt: Revised to include current components considered for today's unconventional and multi-fracture grids, Mechanics of Hydraulic Fracturing, Second Edition explains one of the most important features for fracture design — the ability to predict the geometry and characteristics of the hydraulically induced fracture. With two-thirds of the world's oil and natural gas reserves committed to unconventional resources, hydraulic fracturing is the best proven well stimulation method to extract these resources from their more remote and complex reservoirs. However, few hydraulic fracture models can properly simulate more complex fractures. Engineers and well designers must understand the underlying mechanics of how fractures are modeled in order to correctly predict and forecast a more advanced fracture network. Updated to accommodate today's fracturing jobs, Mechanics of Hydraulic Fracturing, Second Edition enables the engineer to: - Understand complex fracture networks to maximize completion strategies - Recognize and compute stress shadow, which can drastically affect fracture network patterns - Optimize completions by properly modeling and more accurately predicting for today's hydraulic fracturing completions - Discusses the underlying mechanics of creating a fracture from the wellbore - Enhanced to include newer modeling components such as stress shadow and interaction of hydraulic fracture with a natural fracture, which aids in more complex fracture networks - Updated experimental studies that apply to today's unconventional fracturing cases
Download or read book Design and Appraisal of Hydraulic Fractures written by Jack R. Jones and published by . This book was released on 2009 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a basic yet comprehensive introduction to the completion and reservoir engineering aspects of hydraulic fracture stimulation.
Download or read book Essentials of Hydraulic Fracturing written by Ralph W. Veatch and published by Pennwell Books. This book was released on 2017 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydraulic fracturing was first developed in the United States during the 1940s and has since spread internationally. A proven technology that is reaching deeper and tighter formations, hydraulic fracturing now delivers hydrocarbons from fields previously considered economically unviable. Essentials of Hydraulic Fracturing focuses on consolidating the fundamental basics of fracturing technology with advances in extended horizontal wellbores and fracturing applications. It provides the essentials required to understand fracturing behavior and offers advice for applying that knowledge to fracturing treatment design and application. Essentials of Hydraulic Fracturingis a long-awaited text for petroleum engineering students, industry-wide hydraulic fracturing training courses or seminars, and practicing fracturing treatment engineers. Features include: Understanding of fracture propagation geometry and fracture conductivity and how it affects treatment results A focus on safety and environmental prudence Economic optimization of fracturing treatments Fracturing fluid system and propping agent performance Important considerations in designing the fracture treatment for both vertical and horizontal wellbores Algorithms and examples pertinent to treatment design and analysis Pre- and post-fracturing approaches and diagnostics for evaluating treatment performance Hydraulic fracturing model construction and applicability Comparative design examples Construction of spreadsheet calculations key to treatment designs
Download or read book Formation Evaluation and Numerical Modeling on Hydraulic Fracturing for an Emerging Marine Shale Gas Reservoir written by Chenji Wei and published by . This book was released on 2013 with total page 151 pages. Available in PDF, EPUB and Kindle. Book excerpt: Shale gas development has more than 3 decades of history and remains one of the hottest topics in the petroleum industry. Shale gas development in China is underway. Our study focuses on an emerging marine shale gas reservoir in southern China, with its huge reserves that have attracted strong attention. The first part of this dissertation is the petrophysical characterization, which is an important step for a new shale gas play to better understand the geology of the formation, and it provides vital data to optimize a production plan and stimulation design. A systematic petrophysical study was conducted for the marine shale gas reservoir by conducting a series of 6 parallel experiments for 12 groups of samples to measure the total organic content (TOC), vitrinite reflectance (Ro), porosity, permeability, mineralogy, and gas content. Second, the extra-low porosity and permeability of shale formations complicate the mechanisms of shale gas storage and flow. Understanding the microstructure is significant for evaluating a new shale gas play toward accurate reserve estimation and recovery prediction. Both physical measurement (nitrogen adsorption experiment) and visualization technology (Scanning Electron Microscope) were used to characterize the nanopore structure of the Longmaxi Shale. Isotherms were obtained from adsorption experiments, and specific surface area and pore size distribution were calculated from the experimental results. Combining with the TOC, gas content, and mineralogy of the Longmaxi Shale, the significance and the controlling factors of the specific surface area and the nanopore volume were discussed. In addition, various types of porosity and several microfractures were observed from SEM images. Third, preliminary interpretation of the imaging logs revealed natural fractures in the formation that can significantly affect the production performance of shale gas wells since preexisting natural fractures will influence hydraulic fracture propagation. Thus, numerical simulation was conducted focusing on the interaction between hydraulically induced fractures and preexisting natural fractures. A hydraulic fracturing model considering the in-situ stress response to turbulent flow process was developed and validated with regression tests of a bi-wing hydraulic fracture model. Field-scale simulation results indicate that our model is capable of capturing the interactions between hydraulic fractures and the preexisting natural fractures defined by the initial fracture maps. Finally, a new model was built to model the actual network of hydraulic and preexisting fractures from geological interpretations and microseismic mapping results. The discrete fracture modeling (DFM) approach was applied to represent each fracture individually and explicitly. The near-well effects were modeled in detail by refining the unstructured 3D grid to the point where we fully resolve stimulated fractures. Simulations of the detailed model of an actual shale gas reservoir considered various mechanisms including adsorption/desorption, matrix/fracture transfer, and non-Darcy effects. Furthermore, the dissertation illustrates upscaling from the discrete fracture model to a coarse continuum model using multiple subregion (MSR), and the high degree of accuracy provided by this technique is demonstrated by comparing the solution of the upscaled model with the corresponding fine-grid solution for a synthetic case.
Download or read book Hydraulic Fracturing Explained written by Erle C. Donaldson and published by Elsevier. This book was released on 2014-02-25 with total page 225 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rocks mechanics legend Erle Donaldson, along with colleagues Waqi Alam and Nasrin Begum from the oil and gas consultant company Tetrahedron, have authored this handbook on updated fundamentals and more recent technology used during a common hydraulic fracturing procedure. Meant for technical and non-technical professionals interested in the subject of hydraulic fracturing, the book provides a clear and simple explanation of the technology and related issues to promote the safe development of petroleum reserves leading to energy independence throughout the world.
Download or read book Applied Petroleum Geomechanics written by Test Test and published by Gulf Professional Publishing. This book was released on 2019-06-15 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: Applied Petroleum Geomechanics provides a bridge between theory and practice as a daily use reference that contains direct industry applications. Going beyond the basic fundamentals of rock properties, this guide covers critical field and lab tests, along with interpretations from actual drilling operations and worldwide case studies, including abnormal formation pressures from many major petroleum basins. Rounding out with borehole stability solutions and the geomechanics surrounding hydraulic fracturing and unconventional reservoirs, this comprehensive resource gives petroleum engineers a much-needed guide on how to tackle today's advanced oil and gas operations. - Presents methods in formation evaluation and the most recent advancements in the area, including tools, techniques and success stories - Bridges the gap between theory of rock mechanics and practical oil and gas applications - Helps readers understand pore pressure calculations and predictions that are critical to shale and hydraulic activity
Download or read book Master s Theses Directories written by and published by . This book was released on 2006 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Education, arts and social sciences, natural and technical sciences in the United States and Canada".
Download or read book Fracturing Horizontal Wells written by Mohamed Y. Soliman and published by McGraw Hill Professional. This book was released on 2016-04-21 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: Effectively Apply Modern Fracturing Methods in Horizontal Wells Improve productivity and maximize natural gas extraction using the practical information contained in this comprehensive guide. Written by world-renowned experts, Fracturing Horizontal Wells features complete details on the latest fracking tools and technologies. Illustrations, tables, and real-world examples are found throughout. Discover how to handle site selection and testing, build accurate simulations, and efficiently extract energy from horizontal sources, including shale formations. Environmental standards, regulatory compliance, and safety protocols are also included. Fracturing Horizontal Wells covers: • Fracture Stimulation of Horizontal Wells • Transitioning from Vertical to Horizontal Wellbores • Reservoir Engineering Aspects of Horizontal Wells • Reservoir Engineering Aspects of Fractured Horizontal Wells • Fracturing Horizontal Wells: Rock Mechanics Overview • Drilling of Horizontal Wells • Proppant and Proppant Transport • Fracture Diagnostic Testing • Interval Isolation • Horizontal Completion Fracturing Methods and Techniques • Use of Well Logging Measurements and Analysis for Fracturing Design • Fracture Treatment Diagnostics • Environmental Stewardship
Download or read book Numerical Simulation in Hydraulic Fracturing Multiphysics Theory and Applications written by Xinpu Shen and published by CRC Press. This book was released on 2017-03-27 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: The expansion of unconventional petroleum resources in the recent decade and the rapid development of computational technology have provided the opportunity to develop and apply 3D numerical modeling technology to simulate the hydraulic fracturing of shale and tight sand formations. This book presents 3D numerical modeling technologies for hydraulic fracturing developed in recent years, and introduces solutions to various 3D geomechanical problems related to hydraulic fracturing. In the solution processes of the case studies included in the book, fully coupled multi-physics modeling has been adopted, along with innovative computational techniques, such as submodeling. In practice, hydraulic fracturing is an essential project component in shale gas/oil development and tight sand oil, and provides an essential measure in the process of drilling cuttings reinjection (CRI). It is also an essential measure for widened mud weight window (MWW) when drilling through naturally fractured formations; the process of hydraulic plugging is a typical application of hydraulic fracturing. 3D modeling and numerical analysis of hydraulic fracturing is essential for the successful development of tight oil/gas formations: it provides accurate solutions for optimized stage intervals in a multistage fracking job. It also provides optimized well-spacing for the design of zipper-frac wells. Numerical estimation of casing integrity under stimulation injection in the hydraulic fracturing process is one of major concerns in the successful development of unconventional resources. This topic is also investigated numerically in this book. Numerical solutions to several other typical geomechanics problems related to hydraulic fracturing, such as fluid migration caused by fault reactivation and seismic activities, are also presented. This book can be used as a reference textbook to petroleum, geotechnical and geothermal engineers, to senior undergraduate, graduate and postgraduate students, and to geologists, hydrogeologists, geophysicists and applied mathematicians working in this field. This book is also a synthetic compendium of both the fundamentals and some of the most advanced aspects of hydraulic fracturing technology.
