Download or read book Method of Dimensionality Reduction in Contact Mechanics and Friction written by Valentin L. Popov and published by Springer. This book was released on 2014-08-19 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes for the first time a simulation method for the fast calculation of contact properties and friction between rough surfaces in a complete form. In contrast to existing simulation methods, the method of dimensionality reduction (MDR) is based on the exact mapping of various types of three-dimensional contact problems onto contacts of one-dimensional foundations. Within the confines of MDR, not only are three dimensional systems reduced to one-dimensional, but also the resulting degrees of freedom are independent from another. Therefore, MDR results in an enormous reduction of the development time for the numerical implementation of contact problems as well as the direct computation time and can ultimately assume a similar role in tribology as FEM has in structure mechanics or CFD methods, in hydrodynamics. Furthermore, it substantially simplifies analytical calculation and presents a sort of “pocket book edition” of the entirety contact mechanics. Measurements of the rheology of bodies in contact as well as their surface topography and adhesive properties are the inputs of the calculations. In particular, it is possible to capture the entire dynamics of a system – beginning with the macroscopic, dynamic contact calculation all the way down to the influence of roughness – in a single numerical simulation model. Accordingly, MDR allows for the unification of the methods of solving contact problems on different scales. The goals of this book are on the one hand, to prove the applicability and reliability of the method and on the other hand, to explain its extremely simple application to those interested.
Download or read book Method of Dimensionality Reduction in Contact Mechanics written by Valentin L. Popov and published by Technische Universität Berlin, Department of System Dynamics and Friction Physics. This book was released on 2018-08-08 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt: The present book is a collection of open-access papers describing the foundations and applications of the Method of Dimensionality Reduction (MDR), first published in the Journal “Facta Universitatis. Series Mechanical Enginerring” in the years 2014-2018. The Method of Dimensionality Reduction (MDR) is a method of calculation and simulation of contacts of elastic and viscoelastic bodies. It consists essentially of two simple steps: (a) substitution of the three-dimensional continuum by a uniquely defined one-dimensional linearly elastic or viscoelastic foundation (Winkler foundation) and (b) transformation of the three-dimensional profile of the contacting bodies by means of the MDR-transformation. As soon as these two steps are done, the contact problem can be considered to be solved. For axial symmetric contacts, only a small calculation by hand is required which does not exceed elementary calculus and will not be a barrier for any practically-oriented engineer. Alternatively, the MDR can be implemented numerically, which is almost trivial due to the independence of the foundation elements. In spite of its simplicity, all results are exact. The present book brings together papers covering the most important aspects of the MDR and providing a practical guide for its use.
Download or read book Handbook of Contact Mechanics written by Valentin L. Popov and published by Springer. This book was released on 2019-04-26 with total page 357 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book contains a structured collection of the complete solutions of all essential axisymmetric contact problems. Based on a systematic distinction regarding the type of contact, the regime of friction and the contact geometry, a multitude of technically relevant contact problems from mechanical engineering, the automotive industry and medical engineering are discussed. In addition to contact problems between isotropic elastic and viscoelastic media, contact problems between transversal-isotropic elastic materials and functionally graded materials are addressed, too. The optimization of the latter is a focus of current research especially in the fields of actuator technology and biomechanics. The book takes into account adhesive effects which allow access to contact-mechanical questions about micro- and nano-electromechanical systems. Solutions of the contact problems include both the relationships between the macroscopic force, displacement and contact length, as well as the stress and displacement fields at the surface and, if appropriate, within the half-space medium. Solutions are always obtained with the simplest available method - usually with the method of dimensionality reduction (MDR) or approaches which use the solution of the non-adhesive normal contact problem to solve the respective contact problem.
Download or read book Contact Mechanics and Friction written by Valentin L. Popov and published by Springer. This book was released on 2017-03-10 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: This application-oriented book introduces readers to the associations and relationships between contact mechanics and friction, providing them with a deeper understanding of tribology. It addresses the related phenomena of contacts, adhesion, capillary forces, friction, lubrication, and wear from a consistent point of view. The author presents (1) methods for rough estimates of tribological quantities, (2) simple and general methods for analytical calculations, and (3) the crossover into numerical simulation methods, the goal being to convey a consistent view of tribological processes at various scales of magnitude (from nanotribology to earthquake research). The book also explores the system dynamic aspects of tribological systems, such as squeal and its suppression, as well as other types of instabilities and spatial patterns. It includes problems and worked-out solutions for the respective chapters, giving readers ample opportunity to apply the theory to practical situations and to deepen their understanding of the material discussed. The second edition has been extended with a more detailed exposition of elastohydrodynamic lubrication, an updated chapter on numerical simulation methods in contact mechanics, a new section on fretting in the chapter on wear, as well as numerous new exercises and examples, which help to make the book an excellent reference guide.
Download or read book A Review of the Method of Dimensionality Reduction in Contact Mechanics Applications for Structural Damping Wear and Adhesion written by Valentin L. Popov and published by . This book was released on 2020 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Contact mechanics perspective of tribology written by Irina Goryacheva and published by Frontiers Media SA. This book was released on 2021-06-04 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Contact Mechanics written by J.R. Barber and published by Springer. This book was released on 2018-02-09 with total page 585 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the solution of contact problems with an emphasis on idealized (mainly linear) elastic problems that can be treated with elementary analytical methods. General physical and mathematical features of these solutions are highlighted. Topics covered include the contact of rough surfaces and problems involving adhesive (e.g. van der Waals) forces. The author is a well-known researcher in the subject with hands-on experience of the topics covered and a reputation for lucid explanations. The target readership for the book includes researchers who encounter contact problems but whose primary focus is not contact mechanics. Coverage is also suitable for a graduate course in contact mechanics and end-of-chapter problems are included.
Download or read book Contact Mechanics of Articular Cartilage Layers written by Ivan Argatov and published by Springer. This book was released on 2015-06-15 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a comprehensive and unifying approach to articular contact mechanics with an emphasis on frictionless contact interaction of thin cartilage layers. The first part of the book (Chapters 1–4) reviews the results of asymptotic analysis of the deformational behavior of thin elastic and viscoelastic layers. A comprehensive review of the literature is combined with the authors’ original contributions. The compressible and incompressible cases are treated separately with a focus on exact solutions for asymptotic models of frictionless contact for thin transversely isotropic layers bonded to rigid substrates shaped like elliptic paraboloids. The second part (Chapters 5, 6, and 7) deals with the non-axisymmetric contact of thin transversely isotropic biphasic layers and presents the asymptotic modelling methodology for tibio-femoral contact. The third part of the book consists of Chapter 8, which covers contact problems for thin bonded inhomogeneous transversely isotropic elastic layers and Chapter 9, which addresses various perturbational aspects in contact problems and introduces the sensitivity of articular contact mechanics. This book is intended for advanced undergraduate and graduate students, researchers in the area of biomechanics, and engineers interested and involved in the analysis and design of thin-layer structures.
Download or read book Friction and Wear From Elementary Mechanisms to Macroscopic Behavior written by Valentin L. Popov and published by Frontiers Media SA. This book was released on 2019-08-21 with total page 104 pages. Available in PDF, EPUB and Kindle. Book excerpt: Friction and the interaction of surfaces can usually be felt at the scale of the contacting bodies. Indeed, phenomena such as the frictional resistance or the occurrence of wear can be observable with plain eye, but to characterize them and in order to make a prediction, a more detailed understanding at smaller scales is often required. These can include individual roughness peaks or single molecule interactions. In this Research Topic, we have gathered a collection of articles representing the state of the art in tribology’s endeavor to bridge the gap between nano scale elementary research and the macroscopic behavior of contacting bodies. These articles showcase the breadth of questions related to the interaction of micro and macro scale and give examples of successful transfer of insights from one to the other. We are delighted to present this Research Topic to the reader with the hope that it will further inspire and stimulate research in the field.
Download or read book Handbook of Contact Mechanics written by Valentin L. Popov and published by . This book was released on 2019 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book contains a structured collection of complete solutions of all significant axially symmetric contact problems. It provides solutions for classical profiles such as the sphere, cone or flat cylindrical punch as well as a multitude of other technically relevant shapes, e.g. the truncated cone, the worn sphere, rough profiles, hollow cylinders, etc. Normal, tangential and torsional contacts with and without adhesion are examined. Elastically isotropic, transversally isotropic, viscoelastic and functionally graded media are addressed. The solutions of the contact problems cover the relationships between the macroscopic quantities of force and displacement, the contact configuration as well as the stress and displacement fields at the surface and in some cases within the half-space medium. The solutions are obtained by the simplest available method - usually involving the method of dimensionality reduction or approaches of reduction to the non-adhesive normal contact problem. The target audiences This book is geared towards engineers working in e.g. mechanical engineering, the tire industry, the automotive industry, polymer- and elastomer manufacturing. Additionally, it functions as a reference work for research and teaching. Prof. Dr. rer. nat. Valentin L. Popov studied physics and obtained his doctorate in 1985 from the Lomonosov Moscow State University. He habilitated 1994 at the Institute of Strength Physics and Materials Science of the Russian Academy of Sciences. Since 2002 he has headed the Chair of System Dynamics and Friction Physics in the Institute of Mechanics at TU Berlin. Dr. Markus Heß studied Engineering Science at TU Berlin. He obtained his doctorate in 2011 and in the same year received the research award of the German Tribology Society for his dissertation. From 2011 to 2015 he headed the physics department of the preparatory college of TU Berlin and since 2015 has been working as an assistant professor at the Chair of System Dynamics and Friction Physics. M. Sc. Emanuel Willert studied Engineering Science at TU Berlin and the Tomsk Polytech-nic University. Since 2015 he has been working as a research assistant at the Chair of System Dynamics and Friction Physics.
Download or read book Proceedings of the 1st International Conference on Numerical Modelling in Engineering written by Magd Abdel Wahab and published by Springer. This book was released on 2018-08-28 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers outstanding papers on numerical modeling in Mechanical Engineering (Volume 2) as part of the proceedings of the 1st International Conference on Numerical Modeling in Engineering (NME 2018), which was held in Ghent, Belgium. The overall objective of the conference was to bring together international scientists and engineers in academia and industry from fields related to advanced numerical techniques, such as the finite element method (FEM), boundary element method (BEM), isogeometric analysis (IGA), etc., and their applications to a wide range of engineering disciplines. This book addresses various industrial engineering applications of numerical simulations to Mechanical and Materials Engineering, including: Aerospace applications, Acoustic analysis, Biomechanical applications, Contact problems and wear, Heat transfer analysis, Vibration and dynamics, Transient analysis, Nonlinear analysis, Composite materials, Polymers, Metal alloys, Fracture mechanics, Fatigue of materials, Creep behavior, Phase transformation, and Crystal plasticity.
Download or read book Nonlinear Ultrasonic and Vibro Acoustical Techniques for Nondestructive Evaluation written by Tribikram Kundu and published by Springer. This book was released on 2018-10-19 with total page 759 pages. Available in PDF, EPUB and Kindle. Book excerpt: This multi-contributed volume provides a practical, applications-focused introduction to nonlinear acoustical techniques for nondestructive evaluation. Compared to linear techniques, nonlinear acoustical/ultrasonic techniques are much more sensitive to micro-cracks and other types of small distributed damages. Most materials and structures exhibit nonlinear behavior due to the formation of dislocation and micro-cracks from fatigue or other types of repetitive loadings well before detectable macro-cracks are formed. Nondestructive evaluation (NDE) tools that have been developed based on nonlinear acoustical techniques are capable of providing early warnings about the possibility of structural failure before detectable macro-cracks are formed. This book presents the full range of nonlinear acoustical techniques used today for NDE. The expert chapters cover both theoretical and experimental aspects, but always with an eye towards applications. Unlike other titles currently available, which treat nonlinearity as a physics problem and focus on different analytical derivations, the present volume emphasizes NDE applications over detailed analytical derivations. The introductory chapter presents the fundamentals in a manner accessible to anyone with an undergraduate degree in Engineering or Physics and equips the reader with all of the necessary background to understand the remaining chapters. This self-contained volume will be a valuable reference to graduate students through practising researchers in Engineering, Materials Science, and Physics. Represents the first book on nonlinear acoustical techniques for NDE applications Emphasizes applications of nonlinear acoustical techniques Presents the fundamental physics and mathematics behind nonlinear acoustical phenomenon in a simple, easily understood manner Covers a variety of popular NDE techniques based on nonlinear acoustics in a single volume
Download or read book Multiscale Biomechanics and Tribology of Inorganic and Organic Systems written by Georg-Peter Ostermeyer and published by Springer Nature. This book was released on 2020-11-23 with total page 571 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book gathers authoritative contributions concerning multiscale problems in biomechanics, geomechanics, materials science and tribology. It is written in memory of Sergey Grigorievich Psakhie to feature various aspects of his multifaceted research interests, ranging from theoretical physics, computer modeling of materials and material characterization at the atomic scale, to applications in space industry, medicine and geotectonics, and including organizational, psychological and philosophical aspects of scientific research and teaching as well. This book covers new advances relating to orthopedic implants, concerning the physiological, tribological and materials aspects of their behavior; medical and geological applications of permeable fluid-saturated materials; earthquake dynamics together with aspects relating to their managed and gentle release; lubrication, wear and material transfer in natural and artificial joints; material research in manufacturing processes; hard-soft matter interaction, including adhesive and capillary effects; using nanostructures for influencing living cells and for cancer treatment; manufacturing of surfaces with desired properties; self-organization of hierarchical structures during plastic deformation and thermal treatment; mechanics of composites and coatings; and many more. Covering established knowledge as well as new models and methods, this book provides readers with a comprehensive overview of the field, yet also with extensive details on each single topic.
Download or read book Biomedical Methods written by Malgorzata Lekka and published by Walter de Gruyter GmbH & Co KG. This book was released on 2023-02-20 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: The mechanical properties of cells can be used to distinguish pathological from normal cells and tissues in many diseases. This book will outline the physics behind cell and tissue mechanics, describe the methods which can be used to determine their mechanical properties, and present various diseases in which a mechanical fingerprint could be established. The book is designed to not require a background in either Physics or Life Sciences.
Download or read book Handbook of Contact Mechanics written by Emanuel Willert and published by . This book was released on 2020-10-08 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book contains a structured collection of the complete solutions of all essential axisymmetric contact problems. Based on a systematic distinction regarding the type of contact, the regime of friction and the contact geometry, a multitude of technically relevant contact problems from mechanical engineering, the automotive industry and medical engineering are discussed. In addition to contact problems between isotropic elastic and viscoelastic media, contact problems between transversal-isotropic elastic materials and functionally graded materials are addressed, too. The optimization of the latter is a focus of current research especially in the fields of actuator technology and biomechanics. The book takes into account adhesive effects which allow access to contact-mechanical questions about micro- and nano-electromechanical systems. Solutions of the contact problems include both the relationships between the macroscopic force, displacement and contact length, as well as the stress and displacement fields at the surface and, if appropriate, within the half-space medium. Solutions are always obtained with the simplest available method - usually with the method of dimensionality reduction (MDR) or approaches which use the solution of the non-adhesive normal contact problem to solve the respective contact problem. This work was published by Saint Philip Street Press pursuant to a Creative Commons license permitting commercial use. All rights not granted by the work's license are retained by the author or authors.
Download or read book Fractal Approach to Tribology of Elastomers written by Ahad Kh Janahmadov and published by Springer. This book was released on 2018-07-28 with total page 401 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book summarizes the results of years of research on the problem of strength and fracture of polymers and elastomers. It sets out the modern approach to the strength theory from the standpoint of fractals, the kinetic and thermodynamic theories as well as the meso-mechanic destruction. The dimension reduction method is applied to model the friction processes in elastomers subjected to the complex dynamic loading. Finally, it analyses a relation between the fracture mechanism and the relation phenomena, and provides new experimental data on the sealing nodes in accordance with their specific working conditions where the effect of self-sealing is observed.
Download or read book Analysis of Structures on Elastic Foundation written by Levon G. Petrosian and published by CRC Press. This book was released on 2022-06-12 with total page 571 pages. Available in PDF, EPUB and Kindle. Book excerpt: - Introduces a general approach to the method of integral transforms based on the spectral theory of the linear differential operators. - Presents a new, versatile foundation model with a number of advantages over the ground-based models currently used in practical calculations. - Provides new transforms which will aid in solving various problems relevant to bars, beams, plates, and shells in particular for the structures on elastic foundation. - Examines the methods of solving boundary-value problems typical for structural mechanics and related fields.
