Download or read book Method for Formation of High Quality Back Contact with Screen printed Local Back Surface Field written by and published by . This book was released on 2010 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: A thin silicon solar cell having a back dielectric passivation and rear contact with local back surface field is described. Specifically, the solar cell may be fabricated from a crystalline silicon wafer having a thickness from 50 to 500 micrometers. A barrier layer and a dielectric layer are applied at least to the back surface of the silicon wafer to protect the silicon wafer from deformation when the rear contact is formed. At least one opening is made to the dielectric layer. An aluminum contact that provides a back surface field is formed in the opening and on the dielectric layer. The aluminum contact may be applied by screen printing an aluminum paste having from one to 12 atomic percent silicon and then applying a heat treatment at 750 degrees Celsius.
Download or read book Inorganic Flexible Optoelectronics written by Zhenqiang Ma and published by John Wiley & Sons. This book was released on 2019-04-29 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensively covering inorganic flexible optoelectronics and their applications This highly application-oriented book provides an overview of the vibrant research field of inorganic flexible optoelectronics ? from materials to applications ? covering bulk materials as well as nanowires, thin films, nanomembranes for application in light emitting diodes, photodetectors, phototransistors, and solar cells. Edited and written by world-leading experts in the field, Inorganic Flexible Optoelectronics: Materials and Applications begins by covering flexible inorganic light emitting diodes enabled by new materials and designs, and provides examples of their use in neuroscience research. It then looks at flexible light-emitting diodes based on inorganic semiconductor nanostructures ? from thin films to nanowires. Next, the book examines flexible photodetectors with nanomembranes and nanowires; 2-D material based photodetectors on flexible substrates; and IV group materials based solar cells and their flexible photovoltaic technologies. Following that, it presents readers with a section on thin-film III-V single junction and multijunction solar cells and demonstrates their integration onto heterogeneous substrates. Finally, the book finishes with in-depth coverage of novel materials based flexible solar cells. -A must-have book that provides an unprecedented overview of the state of the art in flexible optoelectronics -Supplies in-depth information for new and already active researchers in the field of optoelectronics -Lays down the undiluted knowledge on inorganic flexible optoelectronics ? from materials to devices -Focuses on materials and devices for high-performance applications such as light-emitting diodes, solar cells, and photodetectors Inorganic Flexible Optoelectronics: Materials and Applications appeals to materials scientists, electronics engineers, electrical engineers, inorganic chemists, and solid state physicists.
Download or read book Semiconductor Devices written by Krishan Lal and published by . This book was released on 1996 with total page 688 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Sixteenth European Photovoltaic Solar Energy Conference written by and published by . This book was released on 2000 with total page 1056 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book New Perspectives on Surface Passivation Understanding the Si Al2O3 Interface written by Lachlan E. Black and published by Springer. This book was released on 2016-04-15 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book addresses the problem of passivation at the surface of crystalline silicon solar cells. More specifically, it reports on a high-throughput, industrially compatible deposition method for Al2O3, enabling its application to commercial solar cells. One of the main focus is on the analysis of the physics of Al2O3 as a passivating dielectric for silicon surfaces. This is accomplished through a comprehensive study, which moves from the particular, the case of aluminium oxide on silicon, to the general, the physics of surface recombination, and is able to connect theory with practice, highlighting relevant commercial applications.
Download or read book Advances in Photovoltaics Part 3 written by and published by Academic Press. This book was released on 2014-12-01 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is the third of a set of seven on the topic of photovoltaics. Solar cell-related technologies covered here include: ribbon silicon; heterojunction crystalline silicon; wafer equivalent crystalline silicon; and other advanced silicon solar cell structures and processes. Semiconductors and Semimetals has distinguished itself through the careful selection of well-known authors, editors, and contributors. Originally widely known as the "Willardson and Beer" Series, it has succeeded in publishing numerous landmark volumes and chapters. The series publishes timely, highly relevant volumes intended for long-term impact and reflecting the truly interdisciplinary nature of the field. The volumes in Semiconductors and Semimetals have been and will continue to be of great interest to physicists, chemists, materials scientists, and device engineers in academia, scientific laboratories and modern industry. - Written and edited by internationally renowned experts - Relevant to a wide readership: physicists, chemists, materials scientists, and device engineers in academia, scientific laboratories and modern industry
Download or read book Practical Handbook of Photovoltaics written by T. Markvart and published by Elsevier. This book was released on 2003-10-30 with total page 1014 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook opens with an overview of solar radiation and how its energy can be tapped using photovoltaic cells. Other chapters cover the technology, manufacture and application of PV cells in real situations. The book ends by exploring the economic and business aspects of photovoltaics.
Download or read book Handbook of Silicon Photonics written by Laurent Vivien and published by Taylor & Francis. This book was released on 2016-04-19 with total page 831 pages. Available in PDF, EPUB and Kindle. Book excerpt: The development of integrated silicon photonic circuits has recently been driven by the Internet and the push for high bandwidth as well as the need to reduce power dissipation induced by high data-rate signal transmission. To reach these goals, efficient passive and active silicon photonic devices, including waveguide, modulators, photodetectors,
Download or read book High Efficient Low Cost Photovoltaics written by Vesselinka Petrova-Koch and published by Springer Nature. This book was released on 2019-11-27 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a bird’s-eye view of the recent development trends in photovoltaics – a big business field that is rapidly growing and well on its way to maturity. The book describes current efforts to develop highly efficient, low-cost photovoltaic devices based on crystalline silicon, III–V compounds, copper indium gallium selenide (CIGS) and perovskite photovoltaic cells along with innovative, cost-competitive glass/ flexible tubular glass concentrator modules and systems, highlighting recent attempts to develop highly efficient, low-cost, flexible photovoltaic cells based on CIGS and perovskite thin films. This second edition presents, for the first time, the possible applications of perovskite modules together with Augsburger Tubular photovoltaics.
Download or read book Fundamentals Of Solar Cells written by Alan Fahrenbruch and published by Elsevier. This book was released on 2012-12-02 with total page 580 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Solar Cells: Photovoltaic Solar Energy Conversion provides an introduction to the fundamental physical principles of solar cells. It aims to promote the expansion of solar photovoltaics from relatively small and specialized use to a large-scale contribution to energy supply. The book begins with a review of basic concepts such as the source of energy, the role of photovoltaic conversion, the development of photovoltaic cells, and sequence of phenomena involved in solar power generation. This is followed by separate chapters on each of the processes that take place in solar cell. These include solar input; properties of semiconductors; recombination and the flow of photogenerated carriers; charge separation and the characteristics of junction barriers; and calculation of solar efficiency. Subsequent chapters deal with the operation of specific solar cell devices such as a single-crystal homojunction (Si); a single-crystal-heterojunction/buried-homojunction (AlGaAs/GaAs); and a polycrystalline, thin-film cell (CuxS/CdS). This book is intended for upper-level graduate students who have a reasonably good understanding of solid state physics and for scientists and engineers involved in research and development of solar cells.
Download or read book Photodiodes written by Ilgu Yun and published by BoD – Books on Demand. This book was released on 2012-12-19 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book represents recent progress and development of the photodiodes including the fundamental reviews and the specific applications developed by the authors themselves. The key idea of this book is that it allows authors to deal with a wide range of backgrounds and research progresses in photodiode-related areas. With respect to the original collection of the book chapters, this book contains several improvements and new problems and related solutions are also discussed in the areas from fundamental physics and design to device and circuit applications. The book is intended for graduate students, engineers, and researchers who are especially interested in the area of optoelectronic device applications, including photodiodes, solar cells, CMOS image sensors, Optoelectronic Integrated Circuits, etc.
Download or read book Materials for Advanced Packaging written by Daniel Lu and published by Springer. This book was released on 2016-11-18 with total page 974 pages. Available in PDF, EPUB and Kindle. Book excerpt: Significant progress has been made in advanced packaging in recent years. Several new packaging techniques have been developed and new packaging materials have been introduced. This book provides a comprehensive overview of the recent developments in this industry, particularly in the areas of microelectronics, optoelectronics, digital health, and bio-medical applications. The book discusses established techniques, as well as emerging technologies, in order to provide readers with the most up-to-date developments in advanced packaging.
Download or read book McEvoy s Handbook of Photovoltaics written by Soteris Kalogirou and published by Academic Press. This book was released on 2017-08-24 with total page 1341 pages. Available in PDF, EPUB and Kindle. Book excerpt: Practical Handbook of Photovoltaics, Third Edition, is a 'benchmark' publication for those involved in the design, manufacture and use of these devices. This fully revised handbook includes brand new sections on smart grids, net metering and the modeling of photovoltaic systems, as well as fully revised content on developments in photovoltaic applications, the economics of PV manufacturing and updated chapters on solar cell function, raw materials, photovoltaic standards, calibration and testing, all with new examples and case studies. The editor has assembled internationally-respected contributors from industry and academia around the world to make this a truly global reference. It is essential reading for electrical engineers, designers of systems, installers, architects, policymakers and physicists working with photovoltaics. - Presents a cast of international experts from industry and academia to ensure the highest quality information from multiple stakeholder perspectives - Covers all things photovoltaics, from the principles of solar cell function and their raw materials, to the installation and design of full photovoltaic systems - Includes case studies, practical examples, and reports on the latest advances and worldwide applications
Download or read book Solar Cells written by Tom Markvart and published by Elsevier. This book was released on 2004-12-15 with total page 569 pages. Available in PDF, EPUB and Kindle. Book excerpt: The capture and use of solar energy has been growing for many years, but only in recent times have advances in design and manufacture allowed us to see the incorporation of solar energy as a significant player in the renewable energy arena. Solar cells are at the heart of any photovoltaic system and in this book the various types are described and their characteristics reviewed. Going beyond materials, design and function, ‘Solar Cells’ also covers their testing, monitoring and calibration thus providing a comprehensive account of current activity in this important field of research and industry. ‘Solar Cells’ has been abstracted from the recent ‘Practical Handbook of Photovoltaics’ by the same editors (ISBN 185617 3909. 2003: Elsevier) Internationally-respected contributors from industry and academia Abstracted from ‘The Practical Handbook of Photovoltaics' by the same Editors A comprehensive source-book on all aspects of solar cells
Download or read book Encyclopedia of Sustainable Technologies written by Martin Abraham and published by Elsevier. This book was released on 2017-07-04 with total page 2276 pages. Available in PDF, EPUB and Kindle. Book excerpt: Encyclopedia of Sustainable Technologies, Eight Volume Set provides an authoritative assessment of the sustainable technologies that are currently available or in development. Sustainable technology includes the scientific understanding, development and application of a wide range of technologies and processes and their environmental implications. Systems and lifecycle analyses of energy systems, environmental management, agriculture, manufacturing and digital technologies provide a comprehensive method for understanding the full sustainability of processes. In addition, the development of clean processes through green chemistry and engineering techniques are also described. The book is the first multi-volume reference work to employ both Life Cycle Analysis (LCA) and Triple Bottom Line (TBL) approaches to assessing the wide range of technologies available and their impact upon the world. Both approaches are long established and widely recognized, playing a key role in the organizing principles of this valuable work. Provides readers with a one-stop guide to the most current research in the field Presents a grounding of the fundamentals of the field of sustainable technologies Written by international leaders in the field, offering comprehensive coverage of the field and a consistent, high-quality scientific standard Includes the Life Cycle Analysis and Triple Bottom Line approaches to help users understand and assess sustainable technologies
Download or read book Eleventh International Workshop on the Physics of Semiconductor Devices written by Vikram Kumar and published by Allied Publishers (India). This book was released on 2002 with total page 808 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Silicon Heterojunction Solar Cells written by W.R. Fahrner and published by Trans Tech Publications Ltd. This book was released on 2006-08-15 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: The world of today must face up to two contradictory energy problems: on the one hand, there is the sharply growing consumer demand in countries such as China and India. On the other hand, natural resources are dwindling. Moreover, many of those countries which still possess substantial gas and oil supplies are politically unstable. As a result, renewable natural energy sources have received great attention. Among these, solar-cell technology is one of the most promising candidates. However, there still remains the problem of the manufacturing costs of such cells. Many attempts have been made to reduce the production costs of conventional solar cells (manufactured from monocrystalline silicon using diffusion methods) by instead using cheaper grades of silicon, and simpler pn-junction fabrication. That is the hero of this book; the heterojunction solar cell.
