Download or read book Methanol Reforming Over Oxide Supported Transition Metal Catalysts written by Easwar Santhosh Ranganathan and published by . This book was released on 2006 with total page 167 pages. Available in PDF, EPUB and Kindle. Book excerpt: A series of Mo2C and Mo2N supported catalysts were also evaluated for MSR. The Pt/Mo2N catalyst was 50% more active than a commercial Cu/Zn/Al catalyst; however, the CO2 selectivity was substantially lower. Results from varying the reaction conditions suggested that the H2O adsorption/reaction rate on the Mo2N surface was lower than that on the Cu/Zn/Al catalyst. Additionally, CH3OH and CO competed for adsorption sites on the Pt/Mo2N catalyst.

Download or read book Carbide and Nitride Supported Methanol Steam Reforming Catalysts written by Worajit Setthapun and published by . This book was released on 2006 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Methanol Oxidation Over Non precious Transition Metal Oxide Catalysts written by Richard F. Kueller and published by . This book was released on 1989 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Catalytic Steam Reforming of Methanol to Produce Hydrogen on Supported Metal Catalysts written by Raúl Pérez-Hernández and published by . This book was released on 2012 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Catalytic Steam Reforming of Methanol to Produce Hydrogen on Supported Metal Catalysts.

Download or read book Supported Metals in Catalysis written by James Arthur Anderson and published by World Scientific. This book was released on 2012 with total page 581 pages. Available in PDF, EPUB and Kindle. Book excerpt: With contributions from experts in supported metal catalysis, from both the industry and academia, this book presents the latest developments in characterization and application of supported metals in heterogeneous catalysis. In addition to a thorough and updated coverage of the traditional aspects of heterogeneous catalysis such as preparation, characterization and use in well-established technologies such as Naphtha reforming, the book also includes emerging areas where supported metal catalysis will make significant contributions in future developments, such as fuel cells and fine chemicals synthesis. The second edition of Supported Metals in Catalysis comes complete with new and updated chapters containing important summaries of research in a rapidly evolving field. Very few other books deal with this highly pertinent subject matter, and as such, it is a must-have for anyone working in the field of heterogeneous catalysis.

Download or read book Sustainable Ammonia Production written by Inamuddin and published by Springer Nature. This book was released on 2020-01-09 with total page 136 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents sustainable synthetic pathways and modern applications of ammonia. It focuses on the production of ammonia using various catalytic systems and its use in fuel cells, membrane, agriculture, and renewable energy sectors. The book highlights the history, investigation, and development of sustainable pathways for ammonia production, current challenges, and state-of-the-art reviews. While discussing industrial applications, it fills the gap between laboratory research and viable applications in large-scale production.

Download or read book Methanol Oxidation on Transition Elements Oxides written by Abdulmohsen Alshehri and published by . This book was released on 2013 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Methanol oxidation to formaldehyde is one of the most important industries in our lives; the reaction occurs on catalyst surface in heterogeneous catalysis. Iron molybdate is the current selective catalyst. However, molybdenum volatilises during methanol oxidation and leaving the catalyst with a low molybdenum ratio, which deactivates the catalyst, a 2.2 Mo: 1Fe iron molybdate catalyst was used instead the stoichiometric catalyst, while yield of formaldehyde cannot be 100%. The goal of this study is to find more selective and more productive catalyst than iron molybdate catalyst, the first step is to find another transition element as selective as molybdenum, because molybdenum is the selective part, and iron is the active part, the resulting iron molybdate catalyst is a selective catalyst to formaldehyde near molybdenum and active near iron. Experimentally, catalysts were prepared using co-precipitation method, however, some doped catalysts were papered by incipient wetness impregnation, also sol-immobilization was used to prepare nano-gold particles on the surfaces of few supports. Catalysts characterizations were carried out within several techniques for the surface analysis (XPS) and bulk analysis (XRD), also the surface area was measured by BET equipment. Raman too was used in this study, while micro-reactor was the reactor to determine selectivity and activity of each catalyst. When molybdenum replaced by vanadium, the catalyst yielded 100% formaldehyde at 200 oC; moreover, tungsten was selective. Likewise, iron was replaced by other active metals such as manganese, copper and bismuth, which are active. Nano-gold improved activity when doped on molybdenum oxide and iron molybdate supports.

Download or read book Fuel Processing written by Gunther Kolb and published by John Wiley & Sons. This book was released on 2008-05-05 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: Adopting a unique integrated engineering approach, this text covers all aspects of fuel processing: catalysts, reactors, chemical plant components and integrated system design. While providing an introduction to the subject, it also contains recent research developments, making this an invaluable handbook for chemical, power and process engineers, electrochemists, catalytic chemists, materials scientists and engineers in power technology.

Download or read book Plasma Catalysis written by Annemie Bogaerts and published by MDPI. This book was released on 2019-04-02 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasma catalysis is gaining increasing interest for various gas conversion applications, such as CO2 conversion into value-added chemicals and fuels, N2 fixation for the synthesis of NH3 or NOx, methane conversion into higher hydrocarbons or oxygenates. It is also widely used for air pollution control (e.g., VOC remediation). Plasma catalysis allows thermodynamically difficult reactions to proceed at ambient pressure and temperature, due to activation of the gas molecules by energetic electrons created in the plasma. However, plasma is very reactive but not selective, and thus a catalyst is needed to improve the selectivity. In spite of the growing interest in plasma catalysis, the underlying mechanisms of the (possible) synergy between plasma and catalyst are not yet fully understood. Indeed, plasma catalysis is quite complicated, as the plasma will affect the catalyst and vice versa. Moreover, due to the reactive plasma environment, the most suitable catalysts will probably be different from thermal catalysts. More research is needed to better understand the plasma–catalyst interactions, in order to further improve the applications.

Download or read book Carbon Dioxide Utilization for Global Sustainability written by Sang-Eon Park and published by Elsevier. This book was released on 2004-10-27 with total page 626 pages. Available in PDF, EPUB and Kindle. Book excerpt: Addressing global environmental problems, such as global warming is essential to global sustainability. Continued research leads to advancement in standard methods and produces new data. Carbon Dioxide Utilization for Global Sustainability: Proceedings of the 7th ICCDU (International Conference on Carbon Dioxide Utilization) reflects the most recent research results, as well as stimulating scientific discussions with new challenges in advancing the development of carbon dioxide utilization. Drawing on a wealth of information, this well structured book will benefit students, researchers and consultants looking to catch up on current developments in environmental and chemical engineering.* Provides comprehensive data on CO2 utilisation* Contains up-to-date information, including recent research trends* Is written for students, researchers and consultants in environmental and chemical engineering

Download or read book Methanol Synthesis written by Jerzy Skrzypek and published by . This book was released on 1994 with total page 174 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Methanol Tolerant Oxygen Reduction Catalysts Derived from Transition Metal Oxides written by Nina Katariina Beck and published by . This book was released on 2006 with total page 124 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Methanol written by Angelo Basile and published by Elsevier. This book was released on 2017-10-31 with total page 708 pages. Available in PDF, EPUB and Kindle. Book excerpt: Methanol: Science and Engineering provides a comprehensive review of the chemistry, properties, and current and potential uses and applications of methanol. Divided into four parts, the book begins with a detailed account of current production methods and their economics. The second part deals with the applications of methanol, providing useful insights into future applications. Modeling of the various reactor systems is covered in the next section, with final discussions in the book focusing on the economic and environmental impact of this chemical. Users will find this to be a must-have resource for all researchers and engineers studying alternative energy sources. - Provides the latest developments on methanol research - Reviews methanol production methods and their economics - Outlines the use of methanol as an alternative green transportation fuel - Includes new technologies and many new applications of methanol

Download or read book Perovskite Materials written by Likun Pan and published by BoD – Books on Demand. This book was released on 2016-02-03 with total page 652 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book summarizes the current state of the know-how in the field of perovskite materials: synthesis, characterization, properties, and applications. Most chapters include a review on the actual knowledge and cutting-edge research results. Thus, this book is an essential source of reference for scientists with research fields in energy, physics, chemistry and materials. It is also a suitable reading material for graduate students.

Download or read book Methane Reforming by Carbon Dioxide Over Metal Supported on Nanocrystalline Mixed Oxides written by Alexey Bobin and published by . This book was released on 2014 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Oxygen bonding strength, mobility and reactivity in nanocrystalline Ln-doped ceria-zirconia (Ln=La, Gd, Pr, Sm) with supported Pt, Ni, Ru were studied by state-of-the-art techniques such as isotopic exchange in static and flow reactors with 18O2 and C18O2, O2 TPD, H2 and CH4 TPR, pulse microcalorimetry and TAP reactor. Bulk oxygen mobility is found controlled by a rearrangement of Ce and Zr cations coordination sphere with doping as well as by fast oxygen migration along Pr3+/Pr4+ cationic chains. Surface and near-surface oxygen mobility appears controlled by a strong metal-support interaction with incorporation of metallic ions into surface layers and domain boundaries. In realistic feeds, the catalytic activity in dry reforming of methane correlates with oxygen mobility, required to prevent coking and metal sintering.Transient kinetic studies (non steady-state and SSITKA) allowed us to propose a bi-functional reaction mechanism corresponding to independent redox steps of CH4 and CO2 activation. The rate- limiting step is shown to be the irreversible activation of CH4 on metal sites, while CO2 dissociation on reduced sites of oxide supports proceeds much faster (being reversible for the steady-state surface) followed by a fast oxygen transfer along the surface/domain boundaries to metal sites where CH4 molecules are transformed to CO and H2. The CH4 selective conversion into syngas would involve strongly bound bridging oxygen species with heat of desorption ::600-650 kJ/mol O2. For optimized formulations, Ni+Ru clusters could be involved in CO2 activation via facilitating C-O bond breaking in the transition state, thus increasing the rate constant of the surface reoxidation by CO2, while strongly bound carbonates behave as spectators. For Pt/PrCeZrO, an additional fast route to syngas would occur on Pt ions with participation of weakly bound carbonates stabilized by neighboring Pr4+ ions. Such specificity makes this system highly promising for methane oxi-dry reforming, especially on structured corundum supports for short contact time compact reactors, well adapted to stranded and limited gas resources.

Download or read book Catalysis for Alternative Energy Generation written by László Guczi and published by Springer Science & Business Media. This book was released on 2012-04-17 with total page 543 pages. Available in PDF, EPUB and Kindle. Book excerpt: The increase of greenhouse gases in the atmosphere and the decrease of the available amount of fossil fuels necessitate finding new alternative and sustainable energy sources in the near future. This book summarizes the role and the possibilities of catalysis in the production of new energy carriers and in the utilization of different energy sources. The main goal of this work is to go beyond those results discussed in recent literature by identifying new developments that may lead to breakthroughs in the production of alternative energy. The book discusses the use of biomass or biomass derived materials as energy sources, hydrogen formation in methanol and ethanol reforming, biodiesel production, and the utilization of biogases. Separate sections also deal with fuel cells, photocatalysis, and solar cells, which are all promising processes for energy production that depend heavily on catalysts.

Download or read book Catalysis for Clean Energy and Environmental Sustainability written by K. K. Pant and published by Springer Nature. This book was released on 2021-04-01 with total page 754 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is part of a two-volume work that offers a unique blend of information on realistic evaluations of catalyst-based synthesis processes using green chemistry principles and the environmental sustainability applications of such processes for biomass conversion, refining, and petrochemical production. The volumes provide a comprehensive resource of state-of-the-art technologies and green chemistry methodologies from researchers, academics, and chemical and manufacturing industrial scientists. The work will be of interest to professors, researchers, and practitioners in clean energy catalysis, green chemistry, chemical engineering and manufacturing, and environmental sustainability. This volume focuses on catalyst synthesis and green chemistry applications for petrochemical and refining processes. While most books on the subject focus on catalyst use for conventional crude, fuel-oriented refineries, this book emphasizes recent transitions to petrochemical refineries with the goal of evaluating how green chemistry applications can produce clean energy through petrochemical industrial means. The majority of the chapters are contributed by industrial researchers and technicians and address various petrochemical processes, including hydrotreating, hydrocracking, flue gas treatment and isomerization catalysts.