Download or read book Methanol Production from Natural Gas Cost Analysis Methanol E11A written by Intratec and published by Intratec Solutions. This book was released on 2019-09-17 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of large-scale Methanol production from natural gas. The process examined is a typical arrangement based on conventional steam reforming of natural gas for syngas generation. Natural gas is sent to the steam reformer for producing syngas, which is then converted to Methanol. This report was developed based essentially on the following reference(s): "Methanol", Kirk-Othmer Encyclopedia of Chemical Technology, 5th edition Keywords: Synthesis gas, conventional methanol process, large-scale methanol
Download or read book Methanol Production from Natural Gas Cost Analysis Methanol E11A written by Intratec and published by Intratec. This book was released on 2017-06-01 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of large-scale Methanol production from natural gas The process examined is a typical arrangement based on conventional steam reforming of natural gas for syngas generation. Natural gas is sent to the steam reformer for producing syngas, which is then converted to Methanol. This report was developed based essentially on the following reference(s): "Methanol", Kirk-Othmer Encyclopedia of Chemical Technology, 5th edition Keywords: Synthesis gas, conventional methanol process, large-scale methanol
Download or read book Methanol Production from Natural Gas Cost Analysis Methanol E12A written by Intratec and published by Intratec Solutions. This book was released on 2019-09-17 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of large-scale Methanol production from natural gas. The process examined employs combined reforming for syngas generation similarly to the technologies developed by the following companies: Lurgi, Toyo, KBR, Johnson Matthey/Davy and Haldor-Topsoe. In this process, natural gas is converted into syngas in two steps: steam reforming and autothermal reforming. In the steam reformer, the natural gas reacts with steam and, in the secondary (autothermal) reformer, it reacts with oxygen. The syngas generated is then converted to Methanol. This report was developed based essentially on the following reference(s): (1) US Patent 8629190, issued to Lurgi in 2014 (2) US Patent 8388864, issued to Lurgi in 2013 Keywords: Synthesis Gas, Lurgi MegaMethanol, Johnson Matthey, JM Davy Technologies, Toyo, Kellogg Brown and Root, KBR, Johnson Matthey/Davy, Haldor-Topsoe
Download or read book Syngas Production from Natural Gas Cost Analysis Syngas E11A written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 103 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Syngas (Synthesis Gas) production from natural gas. The process examined is a typical autothermal reforming process. The final product obtained is Syngas with a H2/CO ratio of 2. This report was developed based essentially on the following reference(s): "Gas Production", Ullmann's Encyclopedia of Industrial Chemistry, 7th edition Keywords: Methane, Carbon Monoxide, Catalytic Reforming
Download or read book Methanol Production and Use written by Wh-Hsun Cheng and published by CRC Press. This book was released on 1994-06-10 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work details the technical, environmental and business aspects of current methanol production processes and presents recent developments concerning the use of methanol in transportation fuel and in agriculture. It is written by internationally renowned methanol experts from academia and industry.
Download or read book Methanol Production from Natural Gas Cost Analysis Methanol E13A written by Intratec and published by Intratec. This book was released on 2017-06-01 with total page 101 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of large-scale Methanol production from natural gas The process examined is similar to JM Catalysts LCM Process. In this process, natural gas passes through a gas heated reformer to be converted into syngas, which is then converted to Methanol. This report was developed based essentially on the following reference(s): (1) US Patent 7087652, issued to Johnson Matthey in 2006 (2) "Methanol", Kirk-Othmer Encyclopedia of Chemical Technology, 5th edition Keywords: JM Catalysts, Leading Concept Methanol, autothermal reformer, gas heated reformer
Download or read book Hydrogen via Natural Gas Steam Reforming Cost Analysis Hydrogen E11A written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Hydrogen production from natural gas. The process examined is a typical steam reforming process. This process comprises the following main steps: natural gas steam reforming for syngas production; shift conversion, i.e., reaction of carbon monoxide with steam, producing carbon dioxide and additional Hydrogen; Hydrogen purification by means of a pressure swing adsorption (PSA) system. This report was developed based essentially on the following reference(s): (1) "Hydrogen, 2. Production", Ullmann's Encyclopedia of Industrial Chemistry, 2011 (2) "Hydrogen", Kirk-Othmer Encyclopedia of Chemical Technology, 5th edition Keywords: H2, NG, Water-gas Shifting, Reformer, Steam Methane Reforming, SMR
Download or read book Methanol Production from Syngas Cost Analysis Methanol E21A written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Methanol production starting from synthesis gas (syngas). In the process examined, the methanol synthesis is carried out in a dual reactor system, which consists in an isothermal reactor combined in series with a gas-cooled reactor. This report was developed based essentially on the following reference(s): Keywords: Methyl Alcohol, Catalytic Synthesis
Download or read book Methyl Ester Sulfonate Production Process Cost Analysis MES E11A written by Intratec and published by Intratec. This book was released on 2017-06-01 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Methyl Ester Sulfonate (MES) production from palm oil The process examined consists of two steps: a transesterification step similar to Lurgi Transesterification process and a sulfonation step similar to Chemithon process. In this process, palm oil and methanol are reacted forming methyl ester, which is then sulfonated to Methyl Ester Sulfonate. This report was developed based essentially on the following reference(s): (1) US Patent 8288574, issued to Lurgi in 2012 (2) Handbook of Detergents, Part F: Production Keywords: Methyl Alcohol, Sulfur Burning, Air/SO3 Sulfonation
Download or read book Methanol Production from Natural Gas Or Coal written by A. Stratton and published by . This book was released on 1982 with total page 70 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Methyl Methacrylate from Acetone Cost Analysis MMA E11A written by Intratec and published by Intratec. This book was released on 2017-06-01 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Methyl Methacrylate (MMA) production from acetone, ammonia and natural gas The process examined is similar to Evonik Aveneer process. In this process, hydrogen cyanide, acetone and methanol are used as raw materials for the production of MMA. Different from the conventional acetone cyanohydrin (ACH) process, this process does not use sulfuric acid. The hydrogen cyanide used is generated from ammonia and natural gas in an on-site unit. This report was developed based essentially on the following reference(s): (1) US Patent 8569539, issued to Evonik in 2013 (2) US Patent 20120232305, issued to Evonik in 2012 (3) US Patent 20080194875, issued to Evonik in 2008 Keywords: Propanone, Hydrolysis, Transesterification, Dehydration, Prussic Acid
Download or read book Dimethyl Carbonate Production Process Cost Analysis DMC E11A written by Intratec and published by Intratec Solutions. This book was released on 2019-09-17 with total page 101 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Dimethyl Carbonate (DMC) production from methanol. The process examined is a typical oxidative carbonylation process. This process is a non-phosgene alternative for DMC production, in which CO, O2 and methanol react in the presence of copper chloride (CuCI) catalyst. Although reaction occurs in the liquid phase, a heterogeneous-phase mixture forms and the product stream is withdrawn from the reactor in vapor phase. The vapor is partially condensed, treated for recovery of catalyst and then subjected to distillation operations. Unreacted methanol is recovered and recycled to the reactor. Purified Dimethyl Carbonate is obtained after separation of side-product water. This report was developed based essentially on the following reference(s): (1) US Patent 20030236428, issued to General Electric Company (2) US Patent 5685957, issued to Enichem Synthesis in 1997 Keywords: Non-Phosgene Process, Phosgene-Free, Oxidative Carbonylation, Enichem, Eni
Download or read book Acetylene Production from Natural Gas Cost Analysis Acetylene E11A written by Intratec and published by Intratec. This book was released on 2017-06-01 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Acetylene production from natural gas using a partial combustion process The process examined is similar to BASF process. In this process, natural gas is subjected to high temperatures and is converted to acetylene and hydrogen. The heat required by this endothermic reaction is provided by the combustion of natural gas, which occurs at the same time in the burner, in the presence of substoichiometric amounts of oxygen. The Acetylene product is recovered by selective absorption into N-methylpyrrolidinone solvent and subsequently passed through stripping columns. This report was developed based essentially on the following reference(s): "Acetylene", Ullmann's Encyclopedia of Industrial Chemistry, 7th edition Keywords: Methane, Partial Oxidation, Oxygen, Acetylene Burner
Download or read book Methanol from wood waste written by A E. Hokanson and published by . This book was released on 1977 with total page 26 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Methanol Production from Naphtha Cost Analysis Methanol E31A written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Methanol production from naphtha. The process examined is a typical arrangement based on conventional partial oxidation of naphtha for syngas generation. In this process, naphtha undergoes partial oxidation producing syngas, which is then converted to Methanol. This report was developed based essentially on the following reference(s): Keywords: Synthesis Gas, Partial Oxidation
Download or read book How to Produce Methanol from Coal written by Emil Supp and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 211 pages. Available in PDF, EPUB and Kindle. Book excerpt: Owing to efforts and legislative action - initiated above all by the government of the United States - to use cleaner fuels and thus make a contribution towards a better environment, public attention is back again on using methanol in carbu rettor and diesel engines. Most prominent among the raw materials from which methanol can be produced is coal, whose deposits and resources are many times larger than those of liquid and gaseous hydrocarbons. This book deals with the production of methanol from coal. It describes both the individual steps that are required for this process and the essential ancillary units and offsites associated with the process itself . . It is not meant to inform the reader about the intricate details of the processes, which can much better be taken from the specialized literature that deals exclusively and in detail with them or from the well-known standard engineering books. Rather, this book is to give the reader an impression how manifold a field this is, how many process variations and combinations the designer of such plants has to consider in order to arrive at an optimum design in each particular case. Apart from the production of chemical-grade methanol, the book deals briefly also with fuel methanol production, i. e. with the production of alcohol mixes. One of the many possible routes from coal to methanol is illustrated by a process flow diagram, and a material and energy balance is compiled for this typical example.
Download or read book Methanol Synthesis Technology written by Sunggyu Lee and published by CRC Press. This book was released on 1989-12-04 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: This easy-to-read work is a comprehensive review which focuses primarily on catalytic methanol synthesis. It includes a historic summary of the development of methanol synthesis technology, as well as extensive discussions on statistical experimental design, fabrication and operation of laboratory scale systems. This unique volume also discusses various new catalysts and processes, with special attention to the thermodynamics of methanol synthesis-especially in relation to the new liquid phase process. The comprehensive and practical approach to chemical and synfuel process development makes it an excellent reference in methanol synthesis, reactor design, and scale-up. Written as a practical guide to researchers who are involved in hands-on process research, this book is also a valuable asset to practicing chemical engineers and graduate students interested in reaction engineering, thermodynamics, catalyst development and process design.