Download or read book Metamodeling driven IP Reuse for SoC Integration and Microprocessor Design written by Deepak A. Mathaikutty and published by Artech House. This book was released on 2009 with total page 311 pages. Available in PDF, EPUB and Kindle. Book excerpt: This cutting-edge resource offers you an in-depth understanding of metamodeling approaches for the reuse of intellectual properties (IPs) in the form of reusable design or verification components. The book covers the essential issues associated with fast and effective integration of reusable design components into a system-on-a-chip (SoC) to achieve faster design turn-around time. Moreover, it addresses key factors related to the use of reusable verification IPs for a "write once, use many times" verification strategy - another effective approach that can attain a faster product design cycle.

Download or read book Electronic Design Automation for IC System Design Verification and Testing written by Luciano Lavagno and published by CRC Press. This book was released on 2017-12-19 with total page 773 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first of two volumes in the Electronic Design Automation for Integrated Circuits Handbook, Second Edition, Electronic Design Automation for IC System Design, Verification, and Testing thoroughly examines system-level design, microarchitectural design, logic verification, and testing. Chapters contributed by leading experts authoritatively discuss processor modeling and design tools, using performance metrics to select microprocessor cores for integrated circuit (IC) designs, design and verification languages, digital simulation, hardware acceleration and emulation, and much more. New to This Edition: Major updates appearing in the initial phases of the design flow, where the level of abstraction keeps rising to support more functionality with lower non-recurring engineering (NRE) costs Significant revisions reflected in the final phases of the design flow, where the complexity due to smaller and smaller geometries is compounded by the slow progress of shorter wavelength lithography New coverage of cutting-edge applications and approaches realized in the decade since publication of the previous edition—these are illustrated by new chapters on high-level synthesis, system-on-chip (SoC) block-based design, and back-annotating system-level models Offering improved depth and modernity, Electronic Design Automation for IC System Design, Verification, and Testing provides a valuable, state-of-the-art reference for electronic design automation (EDA) students, researchers, and professionals.

Download or read book IP Cores Design from Specifications to Production written by Khaled Salah Mohamed and published by Springer. This book was released on 2015-08-27 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the life cycle process of IP cores, from specification to production, including IP modeling, verification, optimization, and protection. Various trade-offs in the design process are discussed, including those associated with many of the most common memory cores, controller IPs and system-on-chip (SoC) buses. Readers will also benefit from the author’s practical coverage of new verification methodologies. such as bug localization, UVM, and scan-chain. A SoC case study is presented to compare traditional verification with the new verification methodologies. Discusses the entire life cycle process of IP cores, from specification to production, including IP modeling, verification, optimization, and protection; Introduce a deep introduction for Verilog for both implementation and verification point of view. Demonstrates how to use IP in applications such as memory controllers and SoC buses. Describes a new verification methodology called bug localization; Presents a novel scan-chain methodology for RTL debugging; Enables readers to employ UVM methodology in straightforward, practical terms.

Download or read book Reuse Methodology Manual for System On A Chip Designs written by Pierre Bricaud and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: Silicon technology now allows us to build chips consisting of tens of millions of transistors. This technology promises new levels of system integration onto a single chip, but also presents significant challenges to the chip designer. As a result, many ASIC developers and silicon vendors are re-examining their design methodologies, searching for ways to make effective use of the huge numbers of gates now available. These designers see current design tools and methodologies as inadequate for developing million-gate ASICs from scratch. There is considerable pressure to keep design team size and design schedules constant while design complexities grow. Tools are not providing the productivity gains required to keep pace with the increasing gate counts available from deep submicron technology. Design reuse - the use of pre-designed and pre-verified cores - is the most promising opportunity to bridge the gap between available gate-count and designer productivity. Reuse Methodology Manual for System-On-A-Chip Designs outlines an effective methodology for creating reusable designs for use in a System-on-a-Chip (SoC) design methodology. Silicon and tool technologies move so quickly that no single methodology can provide a permanent solution to this highly dynamic problem. Instead, this manual is an attempt to capture and incrementally improve on current best practices in the industry, and to give a coherent, integrated view of the design process. From the Foreword `Synopsys and Mentor Graphics have joined forces to help make IP reuse a reality. One of the goals of our Design Reuse Partnership is to develop, demonstrate, and document a reuse-based design methodology that works. The Reuse Manual (RMM) is the result of this effort.' Aart J. de Geus, Synopsys, Inc. Walden C. Rhines, Mentor Graphics Corporation

Download or read book The British National Bibliography written by Arthur James Wells and published by . This book was released on 2009 with total page 1922 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Design of Cost Efficient Interconnect Processing Units written by Marcello Coppola and published by CRC Press. This book was released on 2018-10-03 with total page 221 pages. Available in PDF, EPUB and Kindle. Book excerpt: Streamlined Design Solutions Specifically for NoC To solve critical network-on-chip (NoC) architecture and design problems related to structure, performance and modularity, engineers generally rely on guidance from the abundance of literature about better-understood system-level interconnection networks. However, on-chip networks present several distinct challenges that require novel and specialized solutions not found in the tried-and-true system-level techniques. A Balanced Analysis of NoC Architecture As the first detailed description of the commercial Spidergon STNoC architecture, Design of Cost-Efficient Interconnect Processing Units: Spidergon STNoC examines the highly regarded, cost-cutting technology that is set to replace well-known shared bus architectures, such as STBus, for demanding multiprocessor system-on-chip (SoC) applications. Employing a balanced, well-organized structure, simple teaching methods, numerous illustrations, and easy-to-understand examples, the authors explain: how the SoC and NoC technology works why developers designed it the way they did the system-level design methodology and tools used to configure the Spidergon STNoC architecture differences in cost structure between NoCs and system-level networks From professionals in computer sciences, electrical engineering, and other related fields, to semiconductor vendors and investors – all readers will appreciate the encyclopedic treatment of background NoC information ranging from CMPs to the basics of interconnection networks. The text introduces innovative system-level design methodology and tools for efficient design space exploration and topology selection. It also provides a wealth of key theoretical and practical MPSoC and NoC topics, such as technological deep sub-micron effects, homogeneous and heterogeneous processor architectures, multicore SoC, interconnect processing units, generic NoC components, and embeddings of common communication patterns.

Download or read book Quality Metrics Driven Functional Verification for IP Based SoC Design written by Tao Xie and published by . This book was released on 2013 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Real Time Systems Design and Analysis written by Phillip A. Laplante and published by Wiley-IEEE Press. This book was released on 1997 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: "IEEE Press is pleased to bring you this Second Edition of Phillip A. Laplante's best-selling and widely-acclaimed practical guide to building real-time systems. This book is essential for improved system designs, faster computation, better insights, and ultimate cost savings. Unlike any other book in the field, REAL-TIME SYSTEMS DESIGN AND ANALYSIS provides a holistic, systems-based approach that is devised to help engineers write problem-solving software. Laplante's no-nonsense guide to real-time system design features practical coverage of: Related technologies and their histories Time-saving tips * Hands-on instructions Pascal code Insights into decreasing ramp-up times and more!"

Download or read book Software Engineering with Reusable Components written by Johannes Sametinger and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 275 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book provides a clear understanding of what software reuse is, where the problems are, what benefits to expect, the activities, and its different forms. The reader is also given an overview of what sofware components are, different kinds of components and compositions, a taxonomy thereof, and examples of successful component reuse. An introduction to software engineering and software process models is also provided.

Download or read book ESL Design and Verification written by Grant Martin and published by Elsevier. This book was released on 2010-07-27 with total page 489 pages. Available in PDF, EPUB and Kindle. Book excerpt: Visit the authors' companion site! http://www.electronicsystemlevel.com/ - Includes interactive forum with the authors!Electronic System Level (ESL) design has mainstreamed – it is now an established approach at most of the world's leading system-on-chip (SoC) design companies and is being used increasingly in system design. From its genesis as an algorithm modeling methodology with 'no links to implementation', ESL is evolving into a set of complementary methodologies that enable embedded system design, verification and debug through to the hardware and software implementation of custom SoC, system-on-FPGA, system-on-board, and entire multi-board systems. This book arises from experience the authors have gained from years of work as industry practitioners in the Electronic System Level design area; they have seen "SLD" or "ESL" go through many stages and false starts, and have observed that the shift in design methodologies to ESL is finally occurring. This is partly because of ESL technologies themselves are stabilizing on a useful set of languages being standardized (SystemC is the most notable), and use models are being identified that are beginning to get real adoption. ESL DESIGN & VERIFICATION offers a true prescriptive guide to ESL that reviews its past and outlines the best practices of today.Table of ContentsCHAPTER 1: WHAT IS ESL? CHAPTER 2: TAXONOMY AND DEFINITIONS FOR THE ELECTRONIC SYSTEM LEVEL CHAPTER 3: EVOLUTION OF ESL DEVELOPMENT CHAPTER 4: WHAT ARE THE ENABLERS OF ESL? CHAPTER 5: ESL FLOW CHAPTER 6: SPECIFICATIONS AND MODELING CHAPTER 7: PRE-PARTITIONING ANALYSIS CHAPTER 8: PARTITIONING CHAPTER 9: POST-PARTITIONING ANALYSIS AND DEBUG CHAPTER 10: POST-PARTITIONING VERIFICATION CHAPTER 11: HARDWARE IMPLEMENTATION CHAPTER 12: SOFTWARE IMPLEMENTATION CHAPTER 13: USE OF ESL FOR IMPLEMENTATION VERIFICATION CHAPTER 14: RESEARCH, EMERGING AND FUTURE PROSPECTS APPENDIX: LIST OF ACRONYMS* Provides broad, comprehensive coverage not available in any other such book * Massive global appeal with an internationally recognised author team * Crammed full of state of the art content from notable industry experts

Download or read book Ebook Object Oriented Systems Analysis and Design Using UML written by BENNETT and published by McGraw Hill. This book was released on 2010-04-16 with total page 713 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ebook: Object-Oriented Systems Analysis and Design Using UML

Download or read book Model Driven Engineering and Software Development written by Slimane Hammoudi and published by Springer Nature. This book was released on 2021-02-01 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes thoroughly revised and selected papers from the 8th International Conference on Model-Driven Engineering and Software Development, MODELSWARD 2020, held in Valletta, Malta, in February 2020. The 15 revised and extended papers presented in this volume were carefully reviewed and selected from 66 submissions. They present recent research results and development activities in using models and model driven engineering techniques for software development. The papers are organized in topical sections on​ methodologies, processes and platforms; applications and software development; modeling languages, tools and architectures.

Download or read book Automotive Embedded Systems Handbook written by Nicolas Navet and published by CRC Press. This book was released on 2017-12-19 with total page 566 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Clear Outline of Current Methods for Designing and Implementing Automotive Systems Highlighting requirements, technologies, and business models, the Automotive Embedded Systems Handbook provides a comprehensive overview of existing and future automotive electronic systems. It presents state-of-the-art methodological and technical solutions in the areas of in-vehicle architectures, multipartner development processes, software engineering methods, embedded communications, and safety and dependability assessment. Divided into four parts, the book begins with an introduction to the design constraints of automotive-embedded systems. It also examines AUTOSAR as the emerging de facto standard and looks at how key technologies, such as sensors and wireless networks, will facilitate the conception of partially and fully autonomous vehicles. The next section focuses on networks and protocols, including CAN, LIN, FlexRay, and TTCAN. The third part explores the design processes of electronic embedded systems, along with new design methodologies, such as the virtual platform. The final section presents validation and verification techniques relating to safety issues. Providing domain-specific solutions to various technical challenges, this handbook serves as a reliable, complete, and well-documented source of information on automotive embedded systems.

Download or read book Enterprise Architecture at Work written by Marc Lankhorst and published by Springer Science & Business Media. This book was released on 2012-08-20 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: An enterprise architecture tries to describe and control an organisation’s structure, processes, applications, systems and techniques in an integrated way. The unambiguous specification and description of components and their relationships in such an architecture requires a coherent architecture modelling language. Lankhorst and his co‐authors present such an enterprise modelling language that captures the complexity of architectural domains and their relations and allows the construction of integrated enterprise architecture models. They provide architects with concrete instruments that improve their architectural practice. As this is not enough, they additionally present techniques and heuristics for communicating with all relevant stakeholders about these architectures. Since an architecture model is useful not only for providing insight into the current or future situation but can also be used to evaluate the transition from ‘as‐is’ to ‘to‐be’, the authors also describe analysis methods for assessing both the qualitative impact of changes to an architecture and the quantitative aspects of architectures, such as performance and cost issues. The modelling language presented has been proven in practice in many real‐life case studies and has been adopted by The Open Group as an international standard. So this book is an ideal companion for enterprise IT or business architects in industry as well as for computer or management science students studying the field of enterprise architecture.

Download or read book Service Oriented Holonic and Multi agent Manufacturing Systems for Industry of the Future written by Theodor Borangiu and published by Springer. This book was released on 2019-08-02 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings book presents selected peer-reviewed papers from the 9th International Workshop on ‘Service Oriented, Holonic and Multi-agent Manufacturing Systems for the Industry of the Future’ organized by Universitat Politècnica de València, Spain, and held on October 3–4, 2019. The SOHOMA 2019 Workshop aimed to foster innovation in the digital transformation of manufacturing and logistics by promoting new concepts and methods and solutions through service orientation in holonic and agent-based control with distributed intelligence. The book provides insights into the theme of the SOHOMA’19 Workshop – ‘Smart anything everywhere – the vertical and horizontal manufacturing integration, ’ addressing ‘Industry of the Future’ (IoF), a term used to describe the 4th industrial revolution initiated by a new generation of adaptive, fully connected, analytical and highly efficient robotized manufacturing systems. This global IoF model describes a new stage of manufacturing, that is fully automatized and uses advanced information, communication and control technologies such as industrial IoT, cyber-physical production systems, cloud manufacturing, resource virtualization, product intelligence, and digital twin, edge and fog computing. It presents the IoF interconnection of distributed manufacturing entities using a ‘system-of-systems’ approach, discussing new types of highly interconnected and self-organizing production resources in the entire value chain; and new types of intelligent decision-making support based on from real-time production data collected from resources, products and machine learning processing. This book is intended for researchers and engineers working in the manufacturing value chain, and specialists developing computer-based control and robotics solutions for the ‘Industry of the Future’. It is also a valuable resource for master’s and Ph.D. students in engineering sciences programs.

Download or read book Service Oriented Computing written by Munindar P. Singh and published by John Wiley & Sons. This book was released on 2006-02-22 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive text explains the principles and practice of Web services and relates all concepts to practical examples and emerging standards. Its discussions include: Ontologies Semantic web technologies Peer-to-peer service discovery Service selection Web structure and link analysis Distributed transactions Process modelling Consistency management. The application of these technologies is clearly explained within the context of planning, negotiation, contracts, compliance, privacy, and network policies. The presentation of the intellectual underpinnings of Web services draws from several key disciplines such as databases, distributed computing, artificial intelligence, and multi-agent systems for techniques and formalisms. Ideas from these disciplines are united in the context of Web services and service-based applications. Featuring an accompanying website and teacher’s manual that includes a complete set of transparencies for lectures, copies of open-source software for exercises and working implementations, and resources to conduct course projects, this book makes an excellent graduate textbook. It will also prove an invaluable reference and training tool for practitioners.

Download or read book Embedded System Design written by Daniel D. Gajski and published by Springer Science & Business Media. This book was released on 2009-08-14 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: Embedded System Design: Modeling, Synthesis and Verification introduces a model-based approach to system level design. It presents modeling techniques for both computation and communication at different levels of abstraction, such as specification, transaction level and cycle-accurate level. It discusses synthesis methods for system level architectures, embedded software and hardware components. Using these methods, designers can develop applications with high level models, which are automatically translatable to low level implementations. This book, furthermore, describes simulation-based and formal verification methods that are essential for achieving design confidence. The book concludes with an overview of existing tools along with a design case study outlining the practice of embedded system design. Specifically, this book addresses the following topics in detail: . System modeling at different abstraction levels . Model-based system design . Hardware/Software codesign . Software and Hardware component synthesis . System verification This book is for groups within the embedded system community: students in courses on embedded systems, embedded application developers, system designers and managers, CAD tool developers, design automation, and system engineering.