Download or read book High Temperature Oxidation and Corrosion of Metals written by David John Young and published by Elsevier. This book was released on 2008-10-03 with total page 593 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is concerned with understanding the fundamental mechanisms of high temperature alloy oxidation. It uses this understanding to develop methods of predicting oxidation rates and the way they change with temperature, gas chemistry and alloy composition. The focus is on designing (or selecting) alloy compositions which provide optimal resistance to attack by corrosive gases. . Emphasises quantitative calculations for predicting reaction rates and the effects of temperature, oxidant activities and alloy compositions. . Uses phase diagrams and diffusion paths to analyse and interpret scale structures and internal precipitation distributions . Provides a detailed examination of corrosion in industrial gases (water vapour effects, carburisation and metal dusting, sulphidation) . Text is well supported by numerous micrographs, phase diagrams and tabulations of relevant thermodynamic and kinetic data . Combines physical chemistry and materials science methodologies.
Download or read book Developments in High Temperature Corrosion and Protection of Materials written by W Gao and published by Elsevier. This book was released on 2008-04-09 with total page 677 pages. Available in PDF, EPUB and Kindle. Book excerpt: High temperature corrosion is a phenomenon that occurs in components that operate at very high temperatures, such as gas turbines, jet engines and industrial plants. Engineers are constantly striving to understand and prevent this type of corrosion. This book examines the latest developments in the understanding of high temperature corrosion processes and protective oxide scales and coatings. Part one looks at high temperature corrosion. Chapters cover diffusion and solid state reactions, external and internal oxidation of alloys, metal dusting corrosion, tribological degradation, hot corrosion, and oxide scales on hot-rolled steel strips. Modern techniques for analysing high temperature oxidation and corrosion are also discussed. Part two discusses methods of protection using ceramics, composites, protective oxide scales and coatings. Chapters focus on layered ternary ceramics, alumina scales, Ti-Al intermetallic compounds, metal matrix composites, chemical vapour deposited silicon carbide, nanocrystalline coatings and thermal barrier coatings. Part three provides case studies illustrating some of the challenges of high temperature corrosion to industry and how they can be overcome. Case studies include the petrochemical industry, modern incinerators and oxidation processing of electronic materials. This book is a valuable reference tool for engineers who develop heat resistant materials, mechanical engineers who design and maintain high temperature equipment and plant, and research scientists and students who study high temperature corrosion and protection of materials. Describes the latest developments in understanding high temperature corrosion Presents the latest research by the leading innovators from around the globe Case studies are provided to illustrate key points
Download or read book Introduction to the High Temperature Oxidation of Metals written by Neil Birks and published by Cambridge University Press. This book was released on 2009-07-16 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: A straightforward treatment describing the oxidation processes of metals and alloys at elevated temperatures. This 2006 second edition retains the fundamental theory but incorporates advances made in understanding degradation phenomena. The first half provides an authoritative introduction to the basic principles, covering thermodynamics and mechanisms of high temperature corrosion of metals and alloys. The latter half extends the discussion to oxidation processes in complex systems, from reactions in mixed environments to protective techniques, including coatings and atmosphere control. The authors provide a logical and expert treatment of the subject, producing a revised edition that will be a comprehensive guide to material scientists and engineers requiring an understanding of this elementary process.
Download or read book Fatigue and Durability of Metals at High Temperatures written by S. S. Manson and published by ASM International. This book was released on 2009 with total page 277 pages. Available in PDF, EPUB and Kindle. Book excerpt: From concept to application, this book describes the method of strain-range partitioning for analyzing time-dependent fatigue. Creep (time-dependent) deformation is first introduced for monotonic and cyclic loading. Multiple chapters then discuss strain-range partitioning in details for multi-axial loading conditions and how different loading permutations can lead to different micro-mechanistic effects. Notably, the total-strain method of strain-range partitioning (SRP) is described, which is a methodology that sees use in several industries. Examples from aerospace illustrate applications, and methods for predicting time-dependent metal fatigue are critiqued.
Download or read book Ultra High Temperature Materials I written by Igor L. Shabalin and published by Springer. This book was released on 2014-05-16 with total page 800 pages. Available in PDF, EPUB and Kindle. Book excerpt: This exhaustive work in three volumes with featuring cross-reference system provides a thorough overview of ultra-high temperature materials – from elements and chemical compounds to alloys and composites. Topics included are physical (crystallographic, thermodynamic, thermo-physical, electrical, optical, physico-mechanical, nuclear) and chemical (solid-state diffusion, interaction with chemical elements and compounds, interaction with gases, vapours and aqueous solutions) properties of the individual physico-chemical phases and multi-phase materials with melting (or sublimation) points over or about 2500 °C. The first volume focuses on carbon (graphite/graphene) and refractory metals (W, Re, Os, Ta, Mo, Nb, Ir). The second and third volumes are dedicated solely to refractory (ceramic) compounds (oxides, nitrides, carbides, borides, silicides) and to the complex materials – refractory alloys, carbon and ceramic composites, respectively. It will be of interest to researchers, engineers, postgraduate, graduate and undergraduate students in various disciplines alike. The reader is provided with the full qualitative and quantitative assessment for the materials, which could be applied in various engineering devices and environmental conditions at ultra-high temperatures, on the basis of the latest updates in the field of physics, chemistry, materials science, nanotechnology and engineering.
Download or read book The Production and Processing of Inorganic Materials written by James Evans and published by Springer. This book was released on 2016-12-06 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: Guiding readers from the significance, history, and sources of materials to advanced materials and processes, this textbook looks at the production and primary processing of inorganic materials, such as ceramics, metals, silicon, and some composite materials. The text encourages instructors to teach the production of all types of inorganic materials as one. While recognizing the differences between producing various types of materials, the authors focus on the commonality of thermodynamics, kinetics, transport phenomena, phase equilibria and transformation, process engineering, and surface chemistry to all inorganic materials. The text focuses on fundamentals and how fundamentals can be applied to understand how the major inorganic materials are produced and the initial stages of their processing. Understanding of these fundamentals will equip students for engineering future processes for producing materials or for studying the processing of the many less common materials not examined in this text. The text is intended for use in an undergraduate course at the junior or senior level, but will also serve as a useful introductory and reference work for graduate students and practicing scientists and engineers.
Download or read book High Temperature Coatings written by Sudhangshu Bose and published by Butterworth-Heinemann. This book was released on 2017-11-27 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: High Temperature Coatings, Second Edition, demonstrates how to counteract the thermal effects of rapid corrosion and degradation of exposed materials and equipment that can occur under high operating temperatures. This is the first true practical guide on the use of thermally protective coatings for high-temperature applications, including the latest developments in materials used for protective coatings. It covers the make-up and behavior of such materials under thermal stress and the methods used for applying them to specific types of substrates, as well as invaluable advice on inspection and repair of existing thermal coatings. With his long experience in the aerospace gas turbine industry, the author has compiled the very latest in coating materials and coating technologies, as well as hard-to-find guidance on maintaining and repairing thermal coatings, including appropriate inspection protocols. The book is supplemented with the latest reference information and additional support to help readers find more application- and industry-type coatings specifications and uses. Offers an overview of the underlying fundamental concepts of thermally-protective coatings, including thermodynamics, energy kinetics, crystallography and equilibrium phases Covers essential chemistry and physics of underlying substrates, including steels, nickel-iron alloys, nickel-cobalt alloys and titanium alloys Provides detailed guidance on a wide variety of coating types, including those used against high temperature corrosion and oxidative degradation and thermal barrier coatings
Download or read book Handbook of Thermophysical Properties of Metals at High Temperatures written by Vladislav Evgenʹevich Zinovʹev and published by . This book was released on 1996 with total page 598 pages. Available in PDF, EPUB and Kindle. Book excerpt: A compendium of findings about such characteristics of metals at high temperature as density, thermal expansion, heat capacity, diffusivity, elastic properties, transport coefficients, electrical resistance, thermal conductivity, absolute thermoelectric power, and the Hall coefficient. After explain
Download or read book Introduction to the High Temperature Oxidation of Metals written by Neil Birks and published by Cambridge University Press. This book was released on 2006-03-30 with total page 5 pages. Available in PDF, EPUB and Kindle. Book excerpt: A straightforward treatment describing the oxidation processes of metals and alloys at elevated temperatures. This 2006 second edition retains the fundamental theory but incorporates advances made in understanding degradation phenomena. The first half provides an authoritative introduction to the basic principles, covering thermodynamics and mechanisms of high temperature corrosion of metals and alloys. The latter half extends the discussion to oxidation processes in complex systems, from reactions in mixed environments to protective techniques, including coatings and atmosphere control. The authors provide a logical and expert treatment of the subject, producing a revised edition that will be a comprehensive guide to material scientists and engineers requiring an understanding of this elementary process.
Download or read book High Temperature Deformation and Fracture of Materials written by Jun-Shan Zhang and published by Elsevier. This book was released on 2010-09-01 with total page 383 pages. Available in PDF, EPUB and Kindle. Book excerpt: The energy, petrochemical, aerospace and other industries all require materials able to withstand high temperatures. High temperature strength is defined as the resistance of a material to high temperature deformation and fracture. This important book provides a valuable reference to the main theories of high temperature deformation and fracture and the ways they can be used to predict failure and service life. Analyses creep behaviour of materials, the evolution of dislocation substructures during creep, dislocation motion at elevated temperatures and importantly, recovery-creep theories of pure metals Examines high temperature fracture, including nucleation of creep cavity, diffusional growth and constrained growth of creep cavities A valuable reference to the main theories of high temperature deformation and fracture and the ways they can be used to predict failure and service life
Download or read book High temperature Oxidation of Metals written by Per Kofstad and published by . This book was released on 1966 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Introduction to High Temperature Oxidation and Corrosion written by A. S. Khanna and published by ASM International. This book was released on 2002-01-01 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text for graduate and post graduate students covers fundamentals of high temperature corrosion and related topics. Early chapters cover the thermodynamics and kinetics of oxidation and defect structure of oxides and diffusion in oxides, and later chapters cover thin and thick layer oxidation, o
Download or read book High Temperature Materials and Mechanisms written by Yoseph Bar-Cohen and published by CRC Press. This book was released on 2014-03-03 with total page 586 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of high-temperature materials in current and future applications, including silicone materials for handling hot foods and metal alloys for developing high-speed aircraft and spacecraft systems, has generated a growing interest in high-temperature technologies. High Temperature Materials and Mechanisms explores a broad range of issues related to high-temperature materials and mechanisms that operate in harsh conditions. While some applications involve the use of materials at high temperatures, others require materials processed at high temperatures for use at room temperature. High-temperature materials must also be resistant to related causes of damage, such as oxidation and corrosion, which are accelerated with increased temperatures. This book examines high-temperature materials and mechanisms from many angles. It covers the topics of processes, materials characterization methods, and the nondestructive evaluation and health monitoring of high-temperature materials and structures. It describes the application of high temperature materials to actuators and sensors, sensor design challenges, as well as various high temperature materials and mechanisms applications and challenges. Utilizing the knowledge of experts in the field, the book considers the multidisciplinary nature of high temperature materials and mechanisms, and covers technology related to several areas including energy, space, aerospace, electronics, and metallurgy. Supplies extensive references at the end of each chapter to enhance further study Addresses related science and engineering disciplines Includes information on drills, actuators, sensors and more A comprehensive resource of information consolidated in one book, this text greatly benefits students in materials science, aerospace and mechanical engineering, and physics. It is also an ideal resource for professionals in the industry.
Download or read book Metals at High Temperatures written by Frances Hurd Clark and published by . This book was released on 1950 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book High temperature Property Data written by Michael F. Rothman and published by ASM International(OH). This book was released on 1988 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume organizes information by alloy so that pertinent data can be found easily. Physical and mechanical properties from room temperature to temperatures in excess of 100 C are shown graphically or in tabular form. All data is thoroughly referenced. Now high-temperature property data can be found in one complete reference! Over 200 alloys are organized by AISI number into 11 major sections: Irons, Carbon Steels, Alloy Steels, ASTM Steels, Low Alloy Constructional Steels, Ultra High Strength Steels, Tool Steels, Maraging Steels, Wrought Stainless Steels, Heat Resistant Casting Alloys, and Wrought Iron-Nickel Alloys and Iron-Nickel Superalloys. Each alloy record lists the designation, specifications, UNS number composition product forms and a comment on the high-temperature properties and applications. Data is then given for physical properties such as density, specific heat, thermal conductivity, thermal expansion, electrical conductivity. Poisons ratio, moduli of elasticity and rigidity, etc. Mechanical properties follow, and include tensile properties, shearing and bearing properties, impact properties, creep, stress rupture and stress relaxation, and fatigue properties.The last part of the alloy record gives other effects of temperature, such as hot hardness, corrosion, and growth.
Download or read book Coatings for High Temperature Structural Materials written by National Research Council and published by National Academies Press. This book was released on 1996-05-13 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book assesses the state of the art of coatings materials and processes for gas-turbine blades and vanes, determines potential applications of coatings in high-temperature environments, identifies needs for improved coatings in terms of performance enhancements, design considerations, and fabrication processes, assesses durability of advanced coating systems in expected service environments, and discusses the required inspection, repair, and maintenance methods. The promising areas for research and development of materials and processes for improved coating systems and the approaches to increased coating standardization are identified, with an emphasis on materials and processes with the potential for improved performance, quality, reproducibility, or manufacturing cost reduction.
Download or read book Thermal Conductivity of Metals at High Temperatures written by Paul H. Sidles and published by . This book was released on 1951 with total page 30 pages. Available in PDF, EPUB and Kindle. Book excerpt: