Download or read book Metals and Alloys Used on Food Contact Materials and Articles written by Council of Europe. Committee of Experts on Packaging Materials for Food and Pharmaceutical Products and published by . This book was released on 2013-08-06 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt: This guide is intended to provide general provisions and recommendations to assist national policy makers and to enhance the harmonisation of technical standards among the States Parties to the Convention on the Elaboration of a European Pharmacopoeia

Download or read book Food contact materials metals and alloys written by Dorthe Licht Cederberg and published by Nordic Council of Ministers. This book was released on 2015-06-09 with total page 66 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metals and alloys are widely applied as food contact materials, e.g. as process equipment in the food industry and as household utensils. Therefore, they are a potential source of food contamination. Migration of substances from food contact materials to food must not occur in amounts that endanger human health. Relevant for food contact materials made from metals and alloys are the migration (release) of metals, both the main components and foreseen impurities. In-house control based on a declaration of compliance, DoC, and supporting documentation at the producers and importers are important prerequisites to limit this contamination and to ensure compliance with the legislation. This is considered a general part of quality assurance, even though the European legislation does not specifically require a DoC for metals and alloys used as food contact materials. This Nordic guideline gives a short overview of toxicology, analytical feasibility, legislation and guideline values for release of metals from food contact materials. Therefore, the guideline will be a useful tool for industry and official food inspectors.

Download or read book Food Contact Materials Metals and Alloys written by and published by . This book was released on 2015 with total page 63 pages. Available in PDF, EPUB and Kindle. Book excerpt: Abstract: Metals and alloys are widely applied as food contact materials, e.g. as process equipment in the food industry and as household utensils. Therefore, they are a potential source of food contamination. Migration of substances from food contact materials to food must not occur in amounts that endanger human health. Relevant for food contact materials made from metals and alloys are the migration (release) of metals, both the main components and foreseen impurities. In-house control based on a declaration of compliance, DoC, and supporting documentation at the producers and importers are important prerequisites to limit this contamination and to ensure compliance with the legislation. This is considered a general part of quality assurance, even though the European legislation does not specifically require a DoC for metals and alloys used as food contact materials. This Nordic guideline gives a short overview of toxicology, analytical feasibility, legislation and guideline values for release of metals from food contact materials. Therefore, the guideline will be a useful tool for industry and official food inspectors

Download or read book Food Packaging Hygiene written by Caterina Barone and published by Springer. This book was released on 2015-01-17 with total page 137 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Brief is concerned with the connection between food packaging and the chemical composition of packaging materials. In terms of the food packaging hygiene, the influence of the containers on the contained foods is discussed. The book explores new and emerging risks related to food packaging materials in connection with the contained commodities. It also discusses the technology of production with relation to the chemical risk in a “Hazard Analysis and Critical Control Point” (HACCP) investigation.

Download or read book Handbook of Hygiene Control in the Food Industry written by John Holah and published by Woodhead Publishing. This book was released on 2016-06-10 with total page 758 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Hygiene Control in the Food Industry, Second Edition, continues to be an authoritative reference for anyone who needs hands-on practical information to improve best practices in food safety and quality. The book is written by leaders in the field who understand the complex issues of control surrounding food industry design, operations, and processes, contamination management methods, route analysis processing, allergenic residues, pest management, and more. Professionals and students will find a comprehensive account of risk analysis and management solutions they can use to minimize risks and hazards plus tactics and best practices for creating a safe food supply, farm to fork. Presents the latest research and development in the field of hygiene, offering a broad range of the microbiological risks associated with food processing Provides practical hygiene related solutions in food facilities to minimize foodborne pathogens and decrease the occurrence of foodborne disease Includes the latest information on biofilm formation and detection for prevention and control of pathogens as well as pathogen resistance

Download or read book Encyclopedia of Food Safety written by and published by Academic Press. This book was released on 2013-12-12 with total page 2356 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the world’s growing population, the provision of a safe, nutritious and wholesome food supply for all has become a major challenge. To achieve this, effective risk management based on sound science and unbiased information is required by all stakeholders, including the food industry, governments and consumers themselves. In addition, the globalization of the food supply requires the harmonization of policies and standards based on a common understanding of food safety among authorities in countries around the world. With some 280 chapters, the Encyclopedia of Food Safety provides unbiased and concise overviews which form in total a comprehensive coverage of a broad range of food safety topics, which may be grouped under the following general categories: History and basic sciences that support food safety; Foodborne diseases, including surveillance and investigation; Foodborne hazards, including microbiological and chemical agents; Substances added to food, both directly and indirectly; Food technologies, including the latest developments; Food commodities, including their potential hazards and controls; Food safety management systems, including their elements and the roles of stakeholders. The Encyclopedia provides a platform for experts from the field of food safety and related fields, such as nutrition, food science and technology and environment to share and learn from state-of-the art expertise with the rest of the food safety community. Assembled with the objective of facilitating the work of those working in the field of food safety and related fields, such as nutrition, food science and technology and environment - this work covers the entire spectrum of food safety topics into one comprehensive reference work The Editors have made every effort to ensure that this work meets strict quality and pedagogical thresholds such as: contributions by the foremost authorities in their fields; unbiased and concise overviews on a multitude of food safety subjects; references for further information, and specialized and general definitions for food safety terminology In maintaining confidence in the safety of the food supply, sound scientific information is key to effectively and efficiently assessing, managing and communicating on food safety risks. Yet, professionals and other specialists working in this multidisciplinary field are finding it increasingly difficult to keep up with developments outside their immediate areas of expertise. This single source of concise, reliable and authoritative information on food safety has, more than ever, become a necessity

Download or read book Food contact materials in house documentation and traceability written by Nordiska Ministerrådet and published by Nordic Council of Ministers. This book was released on 2008 with total page 90 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Food Packaging written by Sanjay Mavinkere Rangappa and published by CRC Press. This book was released on 2020-10-20 with total page 413 pages. Available in PDF, EPUB and Kindle. Book excerpt: Food Packaging: Advanced Materials, Technologies, and Innovations is a one-stop reference for packaging materials researchers working across various industries. With chapters written by leading international researchers from industry, academia, government, and private research institutions, this book offers a broad view of important developments in food packaging. Presents an extensive survey of food packaging materials and modern technologies Demonstrates the potential of various materials for use in demanding applications Discusses the use of polymers, composites, nanotechnology, hybrid materials, coatings, wood-based, and other materials in packaging Describes biodegradable packaging, antimicrobial studies, and environmental issues related to packaging materials Offers current status, trends, opportunities, and future directions Aimed at advanced students, research scholars, and professionals in food packaging development, this application-oriented book will help expand the reader’s knowledge of advanced materials and their use of innovation in food packaging.

Download or read book Chemical Food Safety written by Leon Brimer and published by CABI. This book was released on 2011 with total page 295 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical food safety deals with all aspects of chemical risks in the food chain, predominantly with the biologically active components of food, additives, contaminants and their toxicology. Preventing the contamination of food with problematic chemical compounds requires a thorough understanding of how compounds enter and pass through the food production process, in addition to toxicology and risk management. Chemical Food Safety covers the underlying principles and applied science required to understand, analyse and take professional action on food safety problems and questions that call for interventions at a local, national or international level. The text follows food contaminants through the production and processing of plant, fungal, algal and animal foods, including oral exposure and intestinal absorption. Risk assessment is explained in the context of targeted future risk management and risk communication, with a view to assessing, managing and communicating risk in the food chain.Chemical Food Safety is ideal for higher level students as well as those working in the food production industry, consultants and national food authorities.

Download or read book Food Safety Management written by Veslemøy Andersen and published by Academic Press. This book was released on 2023-03-28 with total page 1160 pages. Available in PDF, EPUB and Kindle. Book excerpt: Food Safety Management: A Practical Guide for the Food Industry, Second Edition continues to present a comprehensive, integrated and practical approach to the management of food safety throughout the production chain. While many books address specific aspects of food safety, no other book guides you through the various risks associated with each sector of the production process or alerts you to the measures needed to mitigate those risks. This new edition provides practical examples of incidents and their root causes, highlighting pitfalls in food safety management and providing key insights into different means for avoiding them. Each section addresses its subject in terms of relevance and application to food safety and, where applicable, spoilage. The book covers all types of risks (e.g., microbial, chemical, physical) associated with each step of the food chain, making it an ideal resource. Addresses risks and controls at various stages of the food supply chain based on food type, including a generic HACCP study and new information on FSMA Covers the latest emerging technologies for ensuring food safety Includes observations on what works and what doesn't on issues in food safety management Provides practical guidelines for the implementation of elements of the food safety assurance system Explains the role of different stakeholders of the food supply

Download or read book Toxins and Other Harmful Compounds in Foods written by A. Witczak and published by CRC Press. This book was released on 2017-01-12 with total page 509 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents information, based on scientific evidence, on the contents of harmful compounds in food raw materials and products, such as grains, fruits and vegetables, mushrooms, seafood, milk and dairy products, meats, and various processed foods Shows the effects of environmental pollution and the conditions of harvesting and storage of the raw materials on food contamination Discusses the real food safety hazards to the consumers caused by toxins of microbial origin and chemical contamination Describes the beneficial role of processing to decrease the contents of harmful components in food products Presents the role of legislation, quality assurance systems, and available analytical techniques in assuring food safety

Download or read book The EDQM a leading organisation that protects public health written by Council of Europe and published by Council of Europe. This book was released on 2014-11-04 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt: The European Directorate for the Quality of Medicines & HealthCare (EDQM) of the Council of Europe traces its origins and statutes to the Convention on the Elaboration of a European Pharmacopoeia (an international treaty adopted by the Council of Europe in 1964). The 37 member states and European Union (EU) that have signed the Convention are committed to achieving harmonisation of the quality of medicines throughout the European continent and beyond. This brochure presents the activities of the EDQM.

Download or read book Hygienic Design of Food Factories written by John Holah and published by Woodhead Publishing. This book was released on 2023-05-25 with total page 994 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in food safety knowledge, combined with the continuing rapid development of new food products, have had an impact on the need for improved hygiene in the food manufacturing infrastructure. This has created a need for the second edition of Hygienic Design of Food Factories, which expands all existing chapters and includes new topics, such as cold storage and the control of air in food refrigeration facilities. Additionally, chapters explore the prevention of food contamination when building during production, the risk assessment of which is becoming important globally, and hygienic building design regulations in Russia and Brazil. Divided into 6 parts, the book is now thoroughly updated and expanded. Part one reviews the implications of hygiene and construction regulation in various countries on food factory design, while taking into account retailer requirements as well. Part two describes site selection, factory layout and the associated issue of airflow. Parts three through four and five then address the hygienic design of the essential parts of a food factory. These include walls, ceilings, floors, selected utility and process support systems, entry and exit points, storage areas and changing rooms. Lastly part six covers the management of building work and factory inspection when commissioning the plant. With its distinguished editors and international team of contributors, Hygienic Design of Food Factories, 2nd edition, continues to be an essential reference for managers of food factories, food plant engineers and all those with an academic research interest in the field. Presents an authoritative overview of hygiene control in the design, construction and renovation of food factories Examines the implications of hygiene and construction regulation in various countries on food factory design Describes site selection, factory layout and associated issues of service provision

Download or read book Hamilton and Hardy s Industrial Toxicology written by Raymond D. Harbison and published by John Wiley & Sons. This book was released on 2015-04-13 with total page 1364 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing a concise, yet comprehensive, reference on all aspects of industrial exposures and toxicants; this book aids toxicologists, industrial hygienists, and occupational physicians to investigate workplace health problems. • Updates and expands coverage with new chapters covering regulatory toxicology, toxicity testing, physical hazards, high production volume (HPV) chemicals, and workplace drug use • Includes information on occupational and environmental sources of exposure, mammalian toxicology, industrial hygiene, medical management and ecotoxicology • Retains a succinct chapter format that has become the hallmark for the previous editions • Distils a vast amount of information into one resource for both academics and professionals

Download or read book Global Legislation for Food Packaging Materials written by Rinus Rijk and published by John Wiley & Sons. This book was released on 2010-03-19 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing a truly global overview of legislation in all major countries, this practical volume contains the information vital for manufactures of food contact materials and food producers, facilitating a comparison of the requirements and making mutual requirements easier to identify. It covers not only plastics but also other food contact materials, such as paper, board, coatings, ceramics, cork, rubber, and textiles.

Download or read book Chemical Migration and Food Contact Materials written by K Barnes and published by Woodhead Publishing. This book was released on 2006-12-22 with total page 481 pages. Available in PDF, EPUB and Kindle. Book excerpt: Food and beverages can be very aggressive chemical milieu and may interact strongly with materials that they touch. Whenever food is placed in contact with another substance, there is a risk that chemicals from the contact material may migrate into the food. These chemicals may be harmful if ingested in large quantities, or impart a taint or odour to the food, negatively affecting food quality. Food packaging is the most obvious example of a food contact material. As the demand for pre-packaged foods increases, so might the potential risk to consumers from the release of chemicals into the food product. Chemical migration and food contact materials reviews the latest controls and research in this field and how they can be used to ensure that food is safe to eat. Part one discusses the regulation and quality control of chemical migration into food. Part two reviews the latest developments in areas such as exposure estimation and analysis of food contact materials. The final part contains specific chapters on major food contact materials and packaging types, such as recycled plastics, metals, paper and board, multi-layer packaging and intelligent packaging. With its distinguished editors and international team of authors, Chemical migration and food contact materials is an essential reference for scientists and professionals in food packaging manufacture and food processing, as well as all those concerned with assessing the safety of food. Reviews worldwide regulation of food contact materials Includes the latest developments in the analysis of food contact materials Looks in detail at different food contact materials

Download or read book Food Hygiene and Toxicology written by Jaden Richardson and published by Scientific e-Resources. This book was released on 2018-01-05 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: Food shapes a standout amongst the most basic parts imperative to human living, and with expanding mindfulness about issues of wellbeing, cleanliness and sanitation, shoppers have at long last woken upto the issue of food cleanliness. The fundamental worry of a customer lies in food security, quality and validness. Food control strategies have turn out to be greatly fundamental in nowadays and age, where flare-ups of food-borne infections are normal. These methods ought not just accentuation after keeping up clean food in all regards, they should be quick, solid and practical. This book portrays in detail a portion of the food cleanliness methods utilized mechanically and also in homes. It concentrates on various units, instruments and frameworks utilized for quality and cleanliness control of food, food stiffs and food handling condition, with accentuation additionally being given to the approval systems of official associations required 'in food administration. Food cleanliness preparing is fundamental for any individual who handles food as a major aspect of their work and in that capacity is a critical component of many courses. This book has been doled out keeping in minds the requirements of the individuals who handle food in a scope of occupations and it is trusted that this book is of tremendous use to them. We hope therefore that this book will not only reach those who are now responsible for product quality and safety in food companies, and for the design, building and installation of food plants, but particularly also to those who will assume such responsibility in the future.