Download or read book Beryllium Chemistry and Processing written by Kenneth A. Walsh and published by ASM International. This book was released on 2009-01-01 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces beryllium; its history, its chemical, mechanical, and physical properties including nuclear properties. The 29 chapters include the mineralogy of beryllium and the preferred global sources of ore bodies. The identification and specifics of the industrial metallurgical processes used to form oxide from the ore and then metal from the oxide are thoroughly described. The special features of beryllium chemistry are introduced, including analytical chemical practices. Beryllium compounds of industrial interest are identified and discussed. Alloying, casting, powder processing, forming, metal removal, joining and other manufacturing processes are covered. The effect of composition and process on the mechanical and physical properties of beryllium alloys assists the reader in material selection. The physical metallurgy chapter brings conformity between chemical and physical metallurgical processing of beryllium, metal, alloys, and compounds. The environmental degradation of beryllium and its alloys both in aqueous and high temperature condition are presented. The health and environmental issues are thoroughly presented the current requirements and established practices for handling beryllium in the workplace are available. A thorough list of references will assist the user of this book.

Download or read book Powder Metallurgy of Beryllium written by Stanley W. Porembka and published by . This book was released on 1967 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report discusses the powder metallurgy of beryllium from the preparation of powders through the production from the powders of solid products. Various methods of powder compaction are presented including die pressing, isopressing, slip casting, vibration packing and explosive compaction. Sintering, and methods of elevated temperature consolidation, including vacuum hot pressing, hot isostatic pressing, forging, extrusion, and plasma spraying, are discussed. The final sections of the report cover properties of powder beryllium products, applications of beryllium prepared by powder metallurgy and current trends in the powder metallurgy of beryllium. (Author).

Download or read book Critical Mineral Resources of the United States written by K. J. Schulz and published by Geological Survey. This book was released on 2017 with total page 868 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the importance and dependence of specific mineral commodities increase, so does concern about their supply. The United States is currently 100 percent reliant on foreign sources for 20 mineral commodities and imports the majority of its supply of more than 50 mineral commodities. Mineral commodities that have important uses and face potential supply disruption are critical to American economic and national security. However, a mineral commodity's importance and the nature of its supply chain can change with time; a mineral commodity that may not have been considered critical 25 years ago may be critical today, and one considered critical today may not be so in the future. The U.S. Geological Survey has produced this volume to describe a select group of mineral commodities currently critical to our economy and security. For each mineral commodity covered, the authors provide a comprehensive look at (1) the commodity's use; (2) the geology and global distribution of the mineral deposit types that account for the present and possible future supply of the commodity; (3) the current status of production, reserves, and resources in the United States and globally; and (4) environmental considerations related to the commodity's production from different types of mineral deposits. The volume describes U.S. critical mineral resources in a global context, for no country can be self-sufficient for all its mineral commodity needs, and the United States will always rely on global mineral commodity supply chains. This volume provides the scientific understanding of critical mineral resources required for informed decisionmaking by those responsible for ensuring that the United States has a secure and sustainable supply of mineral commodities.

Download or read book Berllium its Metallurgy and Properties written by Henry Herman Hausner and published by Univ of California Press. This book was released on with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Metallurgy of Rare Metals written by Abram Naumovich Zelikman and published by Nova Snova. This book was released on 2018 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rare metals play an important role in the development of major branches of industry, such as vacuum equipment, semiconductor electronics, nuclear power and rocket production, as well as in the production of special steels and hard, refractory and corrosion-resistant alloys.Rapid development and improvement in the production of rare metals took place in the ten years which have elapsed since the publication of the first edition of this book. These ten years have witnessed the beginning of large-scale production of titanium, zirconium, and germanium, and a significant increase in the production volume; new, improved methods for the separation and purification of metals and compounds (ion-exchange, extraction, crystallization methods) as well as arc and electron-beam melting processes for metals were developed. This made it necessary to rewrite most of this book.In view of the growing importance of the lanthanides and rhenium, chapters on these metals were also included. At the same time, we decided to dispense with the chapters on lead and antimony, since these are not usually listed as rare metals. In describing the metallurgy of each metal, much attention was paid to its physicochemical nature and to the practical operations involved in the main technological processes for the production of its chemical compounds and of the pure metal.This book is a textbook for students specializing in the metallurgy of the rare metals. It is assumed that the student is familiar with the physicochemical fundamentals .of metallurgy, ore dressing, metallurgical furnaces, and processes and apparatus used in extractive metallurgy. The description of standard equipment (leaching apparatus, thickeners, filters, comminution installations, etc.) has accordingly been omitted. The references are grouped together at the end of the book.

Download or read book Chemical Methods of Rock Analysis written by D. Hutchison and published by Elsevier. This book was released on 2012-12-02 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: A practical guide to the methods in general use for the complete analysis of silicate rock material and for the determination of all those elements present in major, minor or trace amounts in silicate and other rocks that are routinely, commonly or occasionally determined by methods that are considered to be essentially chemical in character. Such methods include those based upon spectrophotometry, flame emission spectrometry and atomic absorption spectroscopy, as well as gravimetry, titrimetry and the use of ion-selective electrodes. Separation stages are described in full, using precipitation, solvent extraction, distillation, and ion-ex procedures as appropriate. The third edition has been fully revised and updated.

Download or read book Manufacturing Technology for Aerospace Structural Materials written by Flake C Campbell Jr and published by Elsevier. This book was released on 2011-08-31 with total page 617 pages. Available in PDF, EPUB and Kindle. Book excerpt: The rapidly-expanding aerospace industry is a prime developer and user of advanced metallic and composite materials in its many products. This book concentrates on the manufacturing technology necessary to fabricate and assemble these materials into useful and effective structural components. Detailed chapters are dedicated to each key metal or alloy used in the industry, including aluminum, magnesium, beryllium, titanium, high strength steels, and superalloys. In addition the book deals with composites, adhesive bonding and presents the essentials of structural assembly. This book will be an important resource for all those involved in aerospace design and construction, materials science and engineering, as well as for metallurgists and those working in related sectors such as the automotive and mass transport industries. Flake Campbell Jr has over thirty seven years experience in the aerospace industry and is currently Senior Technical Fellow at the Boeing Phantom Works in Missouri, USA.* All major aerospace structural materials covered: metals and composites* Focus on details of manufacture and use* Author has huge experience in aerospace industry* A must-have book for materials engineers, design and structural engineers, metallurgical engineers and manufacturers for the aerospace industry

Download or read book ASM Materials Engineering Dictionary written by Joseph R. Davis and published by ASM International. This book was released on 1992-01-01 with total page 590 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 10,000 entries (arranged from A to Z) are supplemeted by hundreds of figures (approximately 700) & tables (more than 150) that clearly demonstrate the principles & concepts behind important manufacturing processes, illustrate the important structures, or provide representative compositional & property data for a wide variety of ferrous & nonferrous materials, plastics, ceramics, composites (resin-metal-carbon-&-cermaic-matrix) & adhesives. "Technical Briefs" provide encyclopedic-type coverage for some 64 key material groups. Each Technical Brief contains a "Recommended Reading" list to guide the user to additional information. Published by ASM International (tm), Materials Park, OH 44073.

Download or read book Encyclopedia of the Alkaline Earth Compounds written by Richard C. Ropp and published by Newnes. This book was released on 2012-12-31 with total page 1201 pages. Available in PDF, EPUB and Kindle. Book excerpt: Encyclopedia of the Alkaline Earth Compounds is a compilation describing the physical and chemical properties of all of the alkaline earth compounds that have been elucidated to date in the scientific literature. These compounds are used in applications such as LEDs and electronic devices such as smart phones and tablet computers. Preparation methods for each compound are presented to show which techniques have been successful. Structures and phase diagrams are presented where applicable to aid in understanding the complexities of the topics discussed. With concise descriptions presenting the chemical, physical and electrical properties of any given compound, this subject matter will serve as an introduction to the field. This compendium is vital for students and scientific researchers in all fields of scientific endeavors, including non-chemists. 2013 Honorable Mention in Chemistry & Physics from the Association of American Publishers' PROSE Awards Presents a systematic coverage of all known alkaline earth inorganic compounds and their properties Provides a clear, consistent presentation based on groups facilitatating easy comparisons Includes the structure of all the compounds in high quality full-color graphics Summarizes all currently known properties of the transition metals compounds Lists the uses and applications of these compounds in electronics, energy, and catalysis

Download or read book Extractive Metallurgy of Niobium written by A.K. Suri and published by Routledge. This book was released on 2017-11-13 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: The growth and development witnessed today in modern science, engineering, and technology owes a heavy debt to the rare, refractory, and reactive metals group, of which niobium is a member. Extractive Metallurgy of Niobium presents a vivid account of the metal through its comprehensive discussions of properties and applications, resources and resource processing, chemical processing and compound preparation, metal extraction, and refining and consolidation. Typical flow sheets adopted in some leading niobium-producing countries for the beneficiation of various niobium sources are presented, and various chemical processes for producing pure forms of niobium intermediates such as chloride, fluoride, and oxide are discussed. The book also explains how to liberate the metal from its intermediates and describes the physico-chemical principles involved. It is an excellent reference for chemical metallurgists, hydrometallurgists, extraction and process metallurgists, and minerals processors. It is also valuable to a wide variety of scientists, engineers, technologists, and students interested in the topic.

Download or read book Elements of Metallurgy and Engineering Alloys written by Flake C. Campbell and published by ASM International. This book was released on 2008-01-01 with total page 671 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical reference provides thorough and systematic coverage on both basic metallurgy and the practical engineering aspects of metallic material selection and application.

Download or read book Descriptive Inorganic Chemistry written by James E. House and published by Academic Press. This book was released on 2010-09-22 with total page 585 pages. Available in PDF, EPUB and Kindle. Book excerpt: Descriptive Inorganic Chemistry, Second Edition, covers the synthesis, reactions, and properties of elements and inorganic compounds for courses in descriptive inorganic chemistry. This updated version includes expanded coverage of chemical bonding and enhanced treatment of Buckminster Fullerenes, and incorporates new industrial applications matched to key topics in the text. It is suitable for the one-semester (ACS-recommended) course or as a supplement in general chemistry courses. Ideal for majors and non-majors, the book incorporates rich graphs and diagrams to enhance the content and maximize learning. - Includes expanded coverage of chemical bonding and enhanced treatment of Buckminster Fullerenes - Incorporates new industrial applications matched to key topics in the text

Download or read book Metallurgy for the Non Metallurgist Second Edition written by Arthur C. Reardon and published by ASM International. This book was released on 2011-01-01 with total page 527 pages. Available in PDF, EPUB and Kindle. Book excerpt: The completely revised Second Edition of Metallurgy for the Non-Metallurgist provides a solid understanding of the basic principles and current practices of metallurgy. This major new edition is for anyone who uses, makes, buys or tests metal products. For both beginners and others seeking a basic refresher, the new Second Edition of the popular Metallurgy for the Non-Metallurgist gives an all-new modern view on the basic principles and practices of metallurgy. This new edition is extensively updated with broader coverage of topics, new and improved illustrations, and more explanation of basic concepts. Why are cast irons so suitable for casting? Do some nonferrous alloys respond to heat treatment like steels? Why is corrosion so pernicious? These are questions that can be answered in this updated reference with many new illustrations, examples, and descriptions of basic metallurgy.

Download or read book Toxicological Profile for Beryllium written by and published by . This book was released on 2002 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book SME Mineral Processing and Extractive Metallurgy Handbook written by Courtney A. Young and published by Society for Mining, Metallurgy & Exploration. This book was released on 2019-02-01 with total page 2258 pages. Available in PDF, EPUB and Kindle. Book excerpt: This landmark publication distills the body of knowledge that characterizes mineral processing and extractive metallurgy as disciplinary fields. It will inspire and inform current and future generations of minerals and metallurgy professionals. Mineral processing and extractive metallurgy are atypical disciplines, requiring a combination of knowledge, experience, and art. Investing in this trove of valuable information is a must for all those involved in the industry—students, engineers, mill managers, and operators. More than 192 internationally recognized experts have contributed to the handbook’s 128 thought-provoking chapters that examine nearly every aspect of mineral processing and extractive metallurgy. This inclusive reference addresses the magnitude of traditional industry topics and also addresses the new technologies and important cultural and social issues that are important today. Contents Mineral Characterization and AnalysisManagement and ReportingComminutionClassification and WashingTransport and StoragePhysical SeparationsFlotationSolid and Liquid SeparationDisposalHydrometallurgyPyrometallurgyProcessing of Selected Metals, Minerals, and Materials

Download or read book Metallurgy Fundamentals written by Daniel A. Brandt and published by Goodheart-Wilcox Publisher. This book was released on 1999 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: The revised and expanded edition of Metallurgy Fundamentals provides the student with instruction on the basic properties, characteristics, and production of the major metal families. Clear, concise language and numerous illustrations make this an easy-to-understand text for an introductory course in metallurgy. Over 450 tables, diagrams, and photographs show both the theoretical and practical aspects of metallurgy.

Download or read book Reactor Materials written by and published by . This book was released on 1970 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: