Download or read book Metallurgical Technology written by United States. Division of Vocational and Technical Education and published by . This book was released on 1968 with total page 124 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Elements of Metallurgy and Engineering Alloys written by Flake C. Campbell and published by ASM International. This book was released on 2008-01-01 with total page 671 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical reference provides thorough and systematic coverage on both basic metallurgy and the practical engineering aspects of metallic material selection and application.
Download or read book Chemical and Metallurgical Technologies written by United States. Division of Vocational and Technical Education and published by . This book was released on 1962 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Chemical and Metallurgical Technologies written by W. Robert Bokelman and published by . This book was released on 1962 with total page 112 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Powder Metallurgy written by Anish Upadhyaya and published by Universities Press. This book was released on 2018-08-16 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the 1920s, modern powder metallurgy has been used to produce a wide range of structural powder metallurgy components, self-lubricating bearings, and cutting tools. The conventional method involves the production of metal powders and the manufacture of useful objects from such powders by die compaction and sintering. Powder injection molding permits the production of stronger, more uniform, and more complex powder metallurgy parts. A detailed discussion of powder metallurgy materials and products is given in this book. Worked examples, exercises, questions, and problems are included in each chapter.
Download or read book Theory and Methods of Metallurgical Process Integration written by Ruiyu Yin and published by Elsevier. This book was released on 2016-05-26 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: Theory and Methods of Metallurgical Process Integration analyzes the basic elements and characteristics of steel manufacturing processes and operation, also proposing a theory of precise dynamic design and integration of steel plants. Following several case studies, a new generation steel manufacturing process is proposed. Through deep description and analysis of the dynamic operation of the steel manufacturing process, this book can help readers understand that the study of dynamic integration for the "mass-energy-time-space-information" during the steel manufacturing process has to be highly emphasized in order to further promote optimization of the steel manufacturing process and plant. - Extends the research methodology and future direction of the metallurgical process - Concentrates on the study of the physical essence and the running rules of the dynamic operation of the steel manufacturing process - Summarizes six rules for the dynamic operation of the steel manufacturing process for newly-built or existing steel plants, which provides useful guidance for engineering design, production technology, and production and technology management
Download or read book Wire Technology written by Roger N. Wright and published by Butterworth-Heinemann. This book was released on 2016-01-21 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wire Technology: Process Engineering and Metallurgy, Second Edition, covers new developments in high-speed equipment and the drawing of ultra-high strength steels, along with new computer-based design and analysis software and techniques, including Finite Element Analysis. In addition, the author shares his design and risk prediction calculations, as well as several new case studies. New and extended sections cover measurement and instrumentation, die temperature and cooling, multiwire drawing, and high strength steel wire. Coverage of process economics has been greatly enhanced, including an exploration of product yields and cost analysis, as has the coverage of sustainability aspects such as energy use and recycling. As with the first edition, questions and problems are included at the end of each chapter to reinforce key concepts. - Written by an internationally-recognized specialist in wire drawing with extensive academic and industry experience - Provides real-world examples, problems, and case studies that allow engineers to easily apply the theory to their workplace, thus improving productivity and process efficiency - Covers both ferrous and non-ferrous metals in one volume
Download or read book Metallurgical Technologies Energy Conversion and Magnetohydrodynamic Flows written by Herman Branover and published by AIAA. This book was released on 1993 with total page 766 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Refractory Metal Alloys Metallurgy and Technology written by I. Machlin and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 493 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication documents Proceedings of the Symposium on Metal lurgy and Technology of Refractory Metal Alloys, held in Washington, D.C. at the Washington Hilton Hotel on April 25-26, 1968, under sponsorship of the Refractory Metals Committee, Institute of Metals Division, of the Metallurgical Society of AIME, and the National Aeronautics and Space Administration. The Symposium presented critical reviews of selected topics in refractory metal alloys, thereby contributing to an in-depth understanding of the state-of-the-art, and establishing a base line for further research, development, and application. This Symposium is fifth in a series of conferences on refractory metals, sponsored by the Metallurgical Society of AlME. Publications issuing from the conferences are valuable technical and historical source books, tracing the evolution of refractory metals from early laboratory alloying studies to their present status as useful engineering materials. Refractory metals are arbitrarily defined by melting point. A 0 melting temperature of over 3500 F was selected as the minimum for this Symposium, thus excluding chromium and vanadium, which logically could be treated with other refractory metals in Groups VA and VIA of the periodic table. The Refractory Metals Committee is planning reviews of chromium and vanadium in subsequent conferences.
Download or read book 5th International Symposium on High Temperature Metallurgical Processing written by Tao Jiang and published by John Wiley & Sons. This book was released on 2014-01-10 with total page 672 pages. Available in PDF, EPUB and Kindle. Book excerpt: The analysis, development, and/or operation of high temperature processes that involve the production of ferrous and nonferrous metals, alloys, and refractory and ceramic materials are covered in the book. The innovative methods for achieving impurity segregation and removal, by-product recovery, waste minimization, and/or energy efficiency are also involved. Eight themes are presented in the book: 1: High Efficiency New Metallurgical Technology 2: Fundamental Research of Metallurgical Process 3: Alloy and Materials Preparation 4: Roasting, Reduction, and Smelting 5: Sintering of Ores and Powder 6: Simulation and Modeling 7: Treatment of Solid Slag/Wastes and Complex Ores 8: Microwave Heating, Energy, and Environment
Download or read book 10th International Symposium on High Temperature Metallurgical Processing written by Tao Jiang and published by Springer. This book was released on 2019-02-12 with total page 785 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years, global metallurgical industries have experienced fast and prosperous growth. High-temperature metallurgical technology is the backbone to support the technical, environmental, and economical needs for this growth. This collection features contributions covering the advancements and developments of new high-temperature metallurgical technologies and their applications to the areas of processing of minerals; extraction of metals; preparation of refractory and ceramic materials; sintering and synthesis of fine particles; treatment and recycling of slag and wastes; and saving of energy and protection of environment. The volume will have a broad impact on the academics and professionals serving the metallurgical industries around the world.
Download or read book Transactions of the American Institute of Mining Metallurgical and Petroleum Engineers written by American Institute of Mining, Metallurgical, and Petroleum Engineers and published by . This book was released on 1915 with total page 880 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Annual Report written by United States. Office of Education and published by . This book was released on 1902 with total page 1316 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metallurgical Process Engineering written by Ruiyu Yin and published by Springer Science & Business Media. This book was released on 2011-09-15 with total page 355 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Metallurgical Process Engineering" discusses large-scale integrated theory on the level of manufacturing production processes, putting forward concepts for exploring non-equilibrium and irreversible complex system. It emphasizes the dynamic and orderly operation of the steel plant manufacturing process, the major elements of which are the flow, process network and program. The book aims at establishing a quasi-continuous and continuous process system for improving several techno-economic indices, minimizing dissipation and enhancing the market competitiveness and sustainability of steel plants. The book is intended for engineers, researchers and managers in the fields of metallurgical engineering, industrial design, and process engineering. Prof. Ruiyu Yin is honorary president of the Central Iron and Steel Research Institute, China, and a member of the Chinese Academy of Engineering.
Download or read book Routledge German Dictionary of Chemistry and Chemical Technology Worterbuch Chemie und Chemische Technik written by Gross and published by Routledge. This book was released on 2014-06-17 with total page 770 pages. Available in PDF, EPUB and Kindle. Book excerpt: This dictionary consists of some 63,000 terms and over 100,000 translations drawn from all of the main areas of chemistry and chemical technology.
Download or read book 7th International Symposium on High Temperature Metallurgical Processing written by Jiann-Yang Hwang and published by John Wiley & Sons. This book was released on 2016-02-08 with total page 759 pages. Available in PDF, EPUB and Kindle. Book excerpt: The technology, operation, energy, environmental, analysis, and future development of the metallurgical industries utilizing high temperature processes are covered in the book. The innovations on the extraction and production of ferrous and nonferrous metals, alloys, and refractory and ceramic materials, the heating approaches and energy management, and the treatment and utilizations of the wastes and by-products are the topics of special interests. This book focuses on the following issues: High Efficiency New Metallurgical Process and Technology Fundamental Research of Metallurgical Process Alloys and Materials Preparation Direct Reduction and Smelting Reduction Coking, New Energy and Environment Utilization of Solid Slag/Wastes and Complex Ores Characterization of High Temperature Metallurgical Process
Download or read book Metallurgy and Technology of Steel Castings written by Jan Głownia and published by Bentham Science Publishers. This book was released on 2017-12-22 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metallurgy and Technology of Steel Castings is a comprehensive textbook for students and professional engineers in the field of foundry engineering and materials science. The topics covered in this book explain the association between the quality of liquid metal and the properties of the finished cast. Readers will learn about the thermodynamic conditions for addition and recovery of chemical elements (such as Cr, Ni and Mo) in steel, degasifying processes, the influence of alloying additives for manufacturing steel castings that operate in extreme temperatures, anti-corrosive steels and basic cast conditions for making the castings (pouring and heat treatment systems). Metallurgy and Technology of Steel Castings gives readers essential information about steel and steel cast manufacturing processes and equips them with the knowledge to overcome the challenges faced in the foundry environment.
