Download or read book Metallurgical Developments in Carbon Steels written by Iron and Steel Institute and published by . This book was released on 1963 with total page 112 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metallurgical Developments in Carbon Steels written by Bristh Iron and Steel Research Association and published by . This book was released on 1963 with total page 95 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metallurgical Developments in Carbon Steels Papers and Discussions from the Conference Sponsored by the Carbon Steels Committee of the British Iron and Steel Research Association and the Iron and Steel Institute Held on 15 and 16 May 1963 written by British Iron and Steel Research Association. Carbon Steels Committee and published by . This book was released on 1963 with total page 95 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metallurgical Developments in High alloy Steels written by British Iron and Steel Research Association and published by . This book was released on 1964 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metallurgical Developments in Carbon Steels written by and published by . This book was released on 1963 with total page 95 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Special Report No 81 Metallurgical Developments in Carbon Steels written by Iron and Steel Institute and published by . This book was released on 1963 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in the Physical Metallurgy and Applications of Steels written by Metals Society and published by . This book was released on 1982 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metallurgical Developments in Carbon Steels Papers and Discussions from the Conference Sponsored by the Carbon Steels Committee of the British Iron and Steel Research Association and the Iron and Steel Institute Held on 15 and 16 May 1963 written by and published by . This book was released on 1963 with total page 95 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metallurgical Development in Carbon Steels written by and published by . This book was released on 1963 with total page 95 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metallurgical Developments in Carbon Steels written by and published by . This book was released on 1963 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Steels written by George Krauss and published by ASM International. This book was released on 2005 with total page 613 pages. Available in PDF, EPUB and Kindle. Book excerpt: Steels: Processing, Structure, and Performance is a comprehensive guide to the broad, dynamic physical metallurgy of steels. The volume is an extensively revised and updated edition of the classic 1990 book Steels: Heat Treatment and Processing Principles. Eleven new chapters expand the coverage in the previous edition, and other chapters have been reorganized and updated. This volume is an essential reference for anyone who makes, uses, studies, or designs with steel. The interrelationships between chemistry, processing, structure, and performance--the elements of physical metallurgy--are integrated for all the types of steel discussed. The evolution, characterization, and performance of steel microstructures are described, with increased emphasis on deformation and fracture. Heat treatment remains a vital aspect of the manufacture of steel products, and the coverage of thermal processing and its effect on steels is expanded in this edition. Dramatic changes in steel manufacture have occurred in the 15 years since the publication of the 1990 edition. Low-carbon sheet steels have experienced the most dynamic changes: thermal processing of sheet steels on a massive continuous scale has produced new grades with only subtle changes in chemistry. Low carbon sheet steels, together with strengthening mechanisms, developments in microalloyed forging steels, steels with bainitic and a variety of ferritic microstructures, quench and tempered steel performance, high-carbon steels for rail and ultra-high strength wire, and the causes of low toughness and embrittlement are all discussed in new chapters. Brief coverage is provided on the history of steel, including the time frame for important developments. A link to steelmaking and solidification is made in the chapter on the effects of primary processing on steel microstructure. The text is meant to be informative, readable, up-to-date, and self contained. Principles, concepts, and understanding of microstructural evolution and performance, within the framework of processing and properties, are illustrated, by plots of data, micrographs and schematic diagrams. A special effort has been made to include references to the most pertinent books, reviews, and technical papers on a given subject. About the Author Dr. George Krauss is currently University Emeritus Professor at the Colorado School of Mines and a metallurgical consultant specializing in steel microstructural systems. He served at Lehigh University as Assistant Professor, Associate Professor, and Professor of Metallurgy and Materials Science from 1963 to 1975, and in 1975, joined the faculty of the Colorado School of Mines as the AMAX Foundation Professor in Physical Metallurgy. He was the John Henry Moore Professor of Metallurgical and Materials Engineering at the time of his retirement from the Colorado School of Mines in 1997. In 1984, Dr. Krauss was a principal in the establishment of the Advanced Steel Processing and Products Research Center, a National Science Foundation Industry-University cooperative research center at the Colorado School of Mines, and served as its first Director until 1993. In addition to the three editions of the present volume, he coauthored the book Tool Steels, Fifth Edition, ASM International, 1998, and edited or co-edited conference volumes on tempering of steel, carburizing, zinc-based coatings on steel, and microalloyed forging steels. He has published over 300 papers and lectured widely in technical conferences, universities, corporations and ASM International chapters, including a number of keynote, invited and honorary lectures. He presented the Edward DeMille Campbell Memorial Lecture of ASM International in 2000 and the Howe Memorial Lecture of the Iron and Steel Society in 2003. Dr. Krauss has served as the President of the International Federation of Heat Treatment and Surface Engineering (IFHTSE), 1989-91, and as President of ASM International, 1996-97. He is Fellow of ASM International, TMS, and IFHTSE. He has been awarded the Adolf Martens Medal of the German Society for Heat Treatment and Materials, the Charles S. Barrett Silver Medal of the Rocky Mountain Chapter of ASM, the George Brown Gold Medal of 3.
Download or read book Processing and Properties of Low Carbon Steel written by J. Malcolm Gray and published by . This book was released on 1973 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Metallurgy of Iron and Steel written by Sir Robert Abbott Hadfield (bart.) and published by . This book was released on 1922 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Steels written by D. T. Llewellyn and published by Elsevier. This book was released on 2013-10-22 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: Steels: Metallurgy and Applications deals with the metallurgy and applications of steel and covers the broad spectrum of the mainstream commercial grades as well as the service or manufacturing requirements that govern their use. Standard specifications and some of the design considerations that provide satisfactory service performance are considered. Brief reference is also made to some of the steel prices that were effective on January 1, 1991. Comprised of five chapters, this book begins with an overview of technological trends in the steelmaking industry since 1980s, paying particular attention to energy conservation, iron-making, continuous casting, and product requirements. The next chapter is devoted to low-carbon strip steels and their cold-forming behavior, applications, and metallurgical factors affecting cold formability. The third chapter focuses on low-carbon structural steels and their strengthening mechanisms, while the fourth chapter considers engineering steels and their heat treatment aspects. The final chapter describes stainless steels and their composition-structure relationships, commercial grades, corrosion resistance, welding, and cold working. The mechanical properties of stainless steels at elevated and sub-zero temperatures are also examined. This monograph will be of interest to students and practicing metallurgists.
Download or read book Powder Metallurgy Stainless Steels written by Erhard Klar and published by ASM International. This book was released on 2007-01-01 with total page 247 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Introduction to Steels written by P.C. Angelo and published by CRC Press. This book was released on 2019-03-20 with total page 149 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book briefly describes the structure, properties and applications of various grades of steel, primarily aimed at non-metallurgical students from other engineering streams. The book consists of nine chapters covering most of the important types of steels and their physical metallurgy, microstructure and engineering applications including iron-carbon diagram, heat treatment, surface hardening methods, effect of alloying, specific applications, selection of materials, case studies and so forth. The book also contains subjective and objective questions aimed at exam preparation. Key Features Exclusive title aimed at introduction to steels for non-metallurgy audience Includes microstructure, composition, and properties of all the most commonly used steels Describes the heat treatments and the required alloying additions to process steel for the intended applications Discusses effects of alloying elements on steel Explores development of steels for specialized areas such as the automobile, aerospace, and nuclear industries
Download or read book High speed Steel written by Otto Matthew Becker and published by Рипол Классик. This book was released on 1910 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt:
