Download or read book Liquid Metal Magnetohydrodynamics written by J.J. Lielpeteris and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: Liquid metal MHO is within the scope of two series of international conferences. One is the International Congress on "MHD Power Generation", held every four years, which includes technical and economical aspects as well as scientific questions. The other if the Beer-Sheva Seminar on "MHO Flows and Turbulence", held every three years in Israel. In addition to these well established meetings, an IUTAM Symposium was previously organized in Cambridge (UK) in 1982 on "Metallurgical Applications of MHD" by the late Arthur Shercliff. It was focussed on a very specific subject developing radiply from the middle of the 1970's. The magnetic field was generally AC, including frequencies high enough for the skin-depth to be much smaller than the typical length scale of the liquide pool. And the development of new technologies, or the improvement of existing ones, was the main justification of most of the researches presented and discussed. Only two participants from Eastern countries attended this Symposium. By the middle of the 1980's we felt that on this very same topic ideas had reached much more maturity than in 1982. We also realized that a line of research on MHD flows related to fusion reactors (tokamaks) was developing significantly, with particular emphasis on flows at large interaction parameter.
Download or read book Metallurgical Applications of Magnetohydrodynamics written by Henry Keith Moffatt and published by . This book was released on 1984 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metallurgical Technologies Energy Conversion and Magnetohydrodynamic Flows written by Herman Branover and published by AIAA. This book was released on 1993 with total page 766 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book An Introduction to Magnetohydrodynamics written by P. A. Davidson and published by Cambridge University Press. This book was released on 2001-03-05 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is an introductory text on magnetohydrodynamics (MHD) - the study of the interaction of magnetic fields and conducting fluids.
Download or read book Liquid Metal Magnetohydrodynamics written by J.J. Lielpeteris and published by Springer. This book was released on 2011-12-06 with total page 481 pages. Available in PDF, EPUB and Kindle. Book excerpt: Liquid metal MHO is within the scope of two series of international conferences. One is the International Congress on "MHD Power Generation", held every four years, which includes technical and economical aspects as well as scientific questions. The other if the Beer-Sheva Seminar on "MHO Flows and Turbulence", held every three years in Israel. In addition to these well established meetings, an IUTAM Symposium was previously organized in Cambridge (UK) in 1982 on "Metallurgical Applications of MHD" by the late Arthur Shercliff. It was focussed on a very specific subject developing radiply from the middle of the 1970's. The magnetic field was generally AC, including frequencies high enough for the skin-depth to be much smaller than the typical length scale of the liquide pool. And the development of new technologies, or the improvement of existing ones, was the main justification of most of the researches presented and discussed. Only two participants from Eastern countries attended this Symposium. By the middle of the 1980's we felt that on this very same topic ideas had reached much more maturity than in 1982. We also realized that a line of research on MHD flows related to fusion reactors (tokamaks) was developing significantly, with particular emphasis on flows at large interaction parameter.
Download or read book Introduction to Magnetohydrodynamics written by P. A. Davidson and published by Cambridge University Press. This book was released on 2016-12-22 with total page 575 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive textbook prioritising physical ideas over mathematical detail. New material includes fusion plasma magnetohydrodynamics.
Download or read book Electromagnetic Processing of Materials written by Shigeo Asai and published by Springer Science & Business Media. This book was released on 2012-02-12 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is both a course book and a monograph. In fact, it has developed from notes given to graduate course students on materials processing in the years 1989 to 2006. Electromagnetic Processing of Materials (EPM), originates from a branch of materials science and engineering developed in the 1980s as a field aiming to create new materials and/or design processes by making use of various functions which appear when applying the electric and magnetic fields to materials. It is based on transport phenomena, materials processing and magnetohydrodynamics. The first chapter briefly introduces the history, background and technology of EPM. In the second chapter, the concept of transport phenomena is concisely introduced and in the third chapter the essential part of magnetohydrodynamics is transcribed and readers are shown that the concept of transport phenomena does not only apply to heat, mass and momentum, but also magnetic field. The fourth chapter describes electromagnetic processing of electrically conductive materials such as electromagnetic levitation, mixing, brake, and etc., which are caused by the Lorentz force. The fifth chapter treats magnetic processing of organic and non-organic materials such as magnetic levitation, crystal orientation, structural alignment and etc., which are induced by the magnetization force. This part is a new academic field named Magneto-Science, which focuses on the development of super-conducting magnets. This book is written so as to be understood by any graduate student in engineering courses but also to be of interest to engineers and researchers in industries.
Download or read book Superconductor Materials Science Metallurgy Fabrication and Applications written by Simon Foner and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 989 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book encompasses the science, measurement, fabrica tion, and use of superconducting materials in large scale and small scale technologies. The present book is in some sense a continuation and completion of a series of two earlier books based on NA TO Advanced Study Institutes held over the last decade. The first book in the series entitled Superconducting Machines ~nd Devices: Large Systems Appli cations edited by S. Foner and B. B. Schwartz (1974) represented a compilation of all the applications of superconducting technology. The second book entitled Superconductor Applications: Squids and Machines, edited by B. B. Schwartz and S. Foner (1977) reviewed small scale applications and up-dated the large scale applications of superconductiv ity at that time. These two books are both introductions and advanced reference volumes for almost all aspects of the applications of super conductivity. The growth of applied superconductivity has mushroomed in the decade of the 1970's. Technologies which were discussed in the beginning of the 1970's are now beyond the prototype stage. Materials development and performance in operating systems is the basis of the continued applications and economic viability of super conducting technology. In this book, a complete review of all materials technology is presented by leading authorities who were instrumental in the development of superconducting materials technology. The present book is based on the NATO Advanced Study vi PREFACE Institute entitled Superconducting Materials: Science and Technology which was held from August 20 to August 30, 1980 in Sintra, Portugal.
Download or read book Conference Record Industry Applications Society IEEE IAS 1985 Annual Meeting written by IEEE Industry Applications Society. Annual Meeting and published by . This book was released on 1985 with total page 1948 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Applications of Phase Diagrams in Metallurgy and Ceramics written by Gesina C. Carter and published by . This book was released on 1978 with total page 864 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Essential Readings in Light Metals Cast Shop for Aluminum Production written by John Grandfield and published by John Wiley & Sons. This book was released on 2013-04-03 with total page 1126 pages. Available in PDF, EPUB and Kindle. Book excerpt: ONE OF A FOUR-BOOK COLLECTION SPOTLIGHTING CLASSIC ARTICLES Original research findings and reviews spanning all aspectsof the science and technology of casting Since 1971, The Minerals, Metals & Materials Society haspublished the Light Metals proceedings. Highlighting some ofthe most important findings and insights reported over the pastfour decades, this volume features the best original researchpapers and reviews on cast shop science and technology for aluminumproduction published in Light Metals from 1971 to 2011. Papers have been divided into ten subject sections for ease ofaccess. Each section has a brief introduction and a list ofrecommended articles for researchers interested in exploring eachsubject in greater depth. Only 12 percent of the cast shop science and technology papersever published in Light Metals were chosen for this volume.Selection was based on a rigorous review process. Among the papers,readers will find landmark original research findings and expertreviews summarizing current thinking on key topics at the time ofpublication. From basic research to industry standards to advancedapplications, the articles published in this volume collectivelyrepresent a complete overview of cast shop science and technology,supporting the work of students, researchers, and engineers aroundthe world.
Download or read book Essential Readings in Light Metals Volume 3 Cast Shop for Aluminum Production written by John Grandfield and published by Springer. This book was released on 2016-12-23 with total page 1105 pages. Available in PDF, EPUB and Kindle. Book excerpt: ONE OF A FOUR-BOOK COLLECTION SPOTLIGHTING CLASSIC ARTICLES Original research findings and reviews spanning all aspects of the science and technology of casting Since 1971, The Minerals, Metals & Materials Society has published the Light Metals proceedings. Highlighting some of the most important findings and insights reported over the past four decades, this volume features the best original research papers and reviews on cast shop science and technology for aluminum production published in Light Metals from 1971 to 2011. Papers have been divided into ten subject sections for ease of access. Each section has a brief introduction and a list of recommended articles for researchers interested in exploring each subject in greater depth. Only 12 percent of the cast shop science and technology papers ever published in Light Metals were chosen for this volume. Selection was based on a rigorous review process. Among the papers, readers will find landmark original research findings and expert reviews summarizing current thinking on key topics at the time of publication. From basic research to industry standards to advanced applications, the articles published in this volume collectively represent a complete overview of cast shop science and technology, supporting the work of students, researchers, and engineers around the world.
Download or read book Advances in Turbulence Studies written by Yeshajahu Unger and published by AIAA. This book was released on 1993 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Conference Record Industry Applications Society IEEE IAS Annual Meeting written by IEEE Industry Applications Society and published by . This book was released on 1985 with total page 1860 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Magnetohydrodynamics written by R.J. Moreau and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 333 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Perspectives in Fluid Dynamics written by G. K. Batchelor and published by Cambridge University Press. This book was released on 2003 with total page 650 pages. Available in PDF, EPUB and Kindle. Book excerpt: Paperback edition of text on fluid dynamics for graduate students and specialists alike.
Download or read book Mathematical Methods for the Magnetohydrodynamics of Liquid Metals written by Jean-Frédéric Gerbeau and published by Clarendon Press. This book was released on 2006-08-31 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive text focuses on mathematical and numerical techniques for the simulation of magnetohydrodynamic phenomena, with an emphasis laid on the magnetohydrodynamics of liquid metals, and on a prototypical industrial application. Aimed at research mathematicians, engineers, and physicists, as well as those working in industry, and starting from a good understanding of the physics at play, the approach is a highly mathematical one, based on the rigorous analysis of the equations at hand, and a solid numerical analysis to found the simulations. At each stage of the exposition, examples of numerical simulations are provided, first on academic test cases to illustrate the approach, next on benchmarks well documented in the professional literature, and finally, whenever possible, on real industrial cases.
