Download or read book Metallographic Etching Reagents Vol 2 written by Henry S. Rawdon and published by Forgotten Books. This book was released on 2018-02-24 with total page 48 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from Metallographic Etching Reagents, Vol. 2: For Copper Alloys, Nickel, and the Alpha Alloys of Nickel The work herein described forms part of the general investiga tion of nietallographic etching reagents in progress at the Bureau of Standards, In a previous article 1 the authors summarized the results obtained with typical etching regents when copper was used as the metal which Was etched. The results reported below were obtained in the extension of this investigation to the important industrial alloys of copper, the brasses and bronzes, to nickel, and to the common lnickel-rich alloys. Since the pres ent work was a direct continuation of_ the former study, the general method of investigation was similar to that previously employed. In addition to the reagents'of the previous investi gation certain others which were found to be' particularly suited to some of the new materials were also used. The results ob tained With copper suggested strongly the importance of oxida tion in the successful etching of metallographic specimens. _it was shown that most oi. The metaiiographic etching reagents. Used for etching. Copper and its alloys are oxidizing in their nature, the efi'iciency of the reagent depending largely upon this charf acteristic feature of the solution. Reagents Which have at best only a very slight efl'ect upon copper can be made to etch fairly readily either by passing oxygen through the liquid while the specimen is immersed or by adding an oxidizing agent. The character of the etched surface produced - that is, whether of 'the plain or of the contrast type - depends almost entirely upon the results of the oxidation which aids and accompanies the solution of the metal. In general, the results obtained in the present investigation with the typical copper-rich alloys chosen serve to confirm and to substantiate the conclusions reached in the former study. The alloys containing nickel are usually con siderably more resistant to etching reagents than are the alloys of copper.. This is particularly true for nickel itself, Which is often satisfactorily etched only With extreme difficulty. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Download or read book Metallographic Etching Reagents written by Henry S Rawdon and published by Nabu Press. This book was released on 2014-01-08 with total page 46 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a reproduction of a book published before 1923. This book may have occasional imperfections such as missing or blurred pages, poor pictures, errant marks, etc. that were either part of the original artifact, or were introduced by the scanning process. We believe this work is culturally important, and despite the imperfections, have elected to bring it back into print as part of our continuing commitment to the preservation of printed works worldwide. We appreciate your understanding of the imperfections in the preservation process, and hope you enjoy this valuable book. ++++ The below data was compiled from various identification fields in the bibliographic record of this title. This data is provided as an additional tool in helping to ensure edition identification: ++++ Metallographic Etching Reagents: I, For Copper, Volume 2; Metallographic Etching Reagents: I, For Copper; United States. National Bureau Of Standards Henry S. Rawdon, Marjorie Geraldine Lorentz, United States. National Bureau of Standards Govt. print. off., 1922 Science; Chemistry; Inorganic; Copper; Science / Chemistry / Inorganic; Technology & Engineering / Material Science; Technology & Engineering / Metallurgy
Download or read book Metallographic Etching Reagents written by Henry S Rawdon and published by Legare Street Press. This book was released on 2022-10-27 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work has been selected by scholars as being culturally important, and is part of the knowledge base of civilization as we know it. This work is in the "public domain in the United States of America, and possibly other nations. Within the United States, you may freely copy and distribute this work, as no entity (individual or corporate) has a copyright on the body of the work. Scholars believe, and we concur, that this work is important enough to be preserved, reproduced, and made generally available to the public. We appreciate your support of the preservation process, and thank you for being an important part of keeping this knowledge alive and relevant.
Download or read book Metallographic Etching Reagents I for Copper written by Henry S. Rawdon and published by . This book was released on 1920 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metallographic Etching Reagents written by Henry S. Rawdon and published by . This book was released on 1920 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metallographic Etching Reagents written by Henry S. Rawdon and published by . This book was released on 1922 with total page 42 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book CRC Handbook of Metal Etchants written by Perrin Walker and published by CRC Press. This book was released on 1990-12-11 with total page 1434 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication presents cleaning and etching solutions, their applications, and results on inorganic materials. It is a comprehensive collection of etching and cleaning solutions in a single source. Chemical formulas are presented in one of three standard formats - general, electrolytic or ionized gas formats - to insure inclusion of all necessary operational data as shown in references that accompany each numbered formula. The book describes other applications of specific solutions, including their use on other metals or metallic compounds. Physical properties, association of natural and man-made minerals, and materials are shown in relationship to crystal structure, special processing techniques and solid state devices and assemblies fabricated. This publication also presents a number of organic materials which are widely used in handling and general processing...waxes, plastics, and lacquers for example. It is useful to individuals involved in study, development, and processing of metals and metallic compounds. It is invaluable for readers from the college level to industrial R & D and full-scale device fabrication, testing and sales. Scientific disciplines, work areas and individuals with great interest include: chemistry, physics, metallurgy, geology, solid state, ceramic and glass, research libraries, individuals dealing with chemical processing of inorganic materials, societies and schools.
Download or read book Metallographic Etching Reagents I for Copper written by Henry S. Rawdon and published by . This book was released on 1922 with total page 48 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metallographic Etching 2nd Edition written by G. Petzow and published by ASM International. This book was released on 1999-01-01 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: An English translation of the 1994 second edition, this book is an outstanding source of etchants of all types, and electrolytic polishing solutions used by metallographers to reveal the structure of nearly any material ever prepared and examined. The introductory text on specimen preparation and theory of etching has been expanded and updated to cover all common procedures as well as some infrequently used methods. Safety procedures and precautions is a valuable addition as well.
Download or read book Metallographic Etching Reagents written by Edward Center Groesbeck and published by . This book was released on 1925 with total page 62 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metallographic etching Reagents I for copper written by Henry S. Rawdon and published by . This book was released on 1920 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Engineering Index written by and published by . This book was released on 1922 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since its creation in 1884, Engineering Index has covered virtually every major engineering innovation from around the world. It serves as the historical record of virtually every major engineering innovation of the 20th century. Recent content is a vital resource for current awareness, new production information, technological forecasting and competitive intelligence. The world?s most comprehensive interdisciplinary engineering database, Engineering Index contains over 10.7 million records. Each year, over 500,000 new abstracts are added from over 5,000 scholarly journals, trade magazines, and conference proceedings. Coverage spans over 175 engineering disciplines from over 80 countries. Updated weekly.
Download or read book The Journal of the Iron and Steel Institute written by Iron and Steel Institute and published by . This book was released on 1922 with total page 840 pages. Available in PDF, EPUB and Kindle. Book excerpt: Includes the institute's Proceedings.
Download or read book Transactions written by Iron and Steel Institute and published by . This book was released on 1915 with total page 862 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A S T M Standards written by American Society for Testing Materials and published by . This book was released on 1927 with total page 890 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Book of A S T M Standards with Related Material written by and published by . This book was released on 1927 with total page 890 pages. Available in PDF, EPUB and Kindle. Book excerpt:
