Download or read book China Standard GB T228 1 2010 Metallic materials Tensile testing Part 1 Method of test at room temperature written by www.1clicktong.com and published by Risk Management 1 Click Tong. This book was released on 2020-10-14 with total page 68 pages. Available in PDF, EPUB and Kindle. Book excerpt: This part in GB/T 228 stipulates the principle, meaning, symbol and explanation, sample and its size measurement, test equipment, test requirement, performance test, rounding off of value of measurement result and test report. This part in applicable to the measurement of tensile performance of metallic materials at room temperature. Note: Annex A gives supplemental advices on computerized testing machine.
Download or read book Springer Handbook of Metrology and Testing written by Horst Czichos and published by Springer Science & Business Media. This book was released on 2011-07-22 with total page 1244 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Springer Handbook of Metrology and Testing presents the principles of Metrology – the science of measurement – and the methods and techniques of Testing – determining the characteristics of a given product – as they apply to chemical and microstructural analysis, and to the measurement and testing of materials properties and performance, including modelling and simulation. The principal motivation for this Handbook stems from the increasing demands of technology for measurement results that can be used globally. Measurements within a local laboratory or manufacturing facility must be able to be reproduced accurately anywhere in the world. The book integrates knowledge from basic sciences and engineering disciplines, compiled by experts from internationally known metrology and testing institutions, and academe, as well as from industry, and conformity-assessment and accreditation bodies. The Commission of the European Union has expressed this as there is no science without measurements, no quality without testing, and no global markets without standards.
Download or read book Formability of Metallic Materials written by D. Banabic and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: After a brief introduction into crystal plasticity,the fun- damentals of crystallographic textures and plastic anisotro- py, a main topic of this book, are outlined. A large chapter is devoted to formability testing both for bulk metal and sheet metal forming. For the first time testing methods for plastic anisotropy of round bars and tubes are included. A profound survey is given of literature about yield criteria for anisotropic materials up to most recent developments and the calculation of forming limits of anisotropic sheet me- tal. Other chapters are concerned with properties of workpieces after metal forming as well as the fundamentals of the theory of plasticity and finite element simulation of metal forming processes. The book is completed by a collection of tables of international standards for formability testing and of flow curves of metals which are most commonly used in metal forming. It is addressed both to university and industrial readers.
Download or read book Applied Metrology for Manufacturing Engineering written by Ammar Grous and published by John Wiley & Sons. This book was released on 2013-03-04 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt: Applied Metrology for Manufacturing Engineering, stands out from traditional works due to its educational aspect. Illustrated by tutorials and laboratory models, it is accessible to users of non-specialists in the fields of design and manufacturing. Chapters can be viewed independently of each other. This book focuses on technical geometric and dimensional tolerances as well as mechanical testing and quality control. It also provides references and solved examples to help professionals and teachers to adapt their models to specific cases. It reflects recent developments in ISO and GPS standards and focuses on training that goes hand in hand with the progress of practical work and workshops dealing with measurement and dimensioning.
Download or read book Materials and Structures in Cold Regions written by Jia-Bao Yan and published by Elsevier. This book was released on 2024-08-10 with total page 523 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials and Structures in Cold Regions: The Impact of Low Temperatures on Construction Materials and the Structural Behaviour of Structural Members is based on the latest research undertaken at Tianjin University, P.R. China and National University of Singapore. The book provides detailed experimental research on the influences of low temperatures on the mechanical properties of constructional materials and structural behavior of typical structural members at low temperatures, e.g., beams, columns, and walls. The theoretical and numerical models in the book on structural members at low temperatures simplifies and provides guidelines for structural engineers working on cold-region projects.The book blends the fundamental development of concepts with the practical specification of materials and structures at low temperatures. - Provides detailed experimental research on the influence of low temperatures on the mechanical properties of constructional materials, and structural behavior of typical structural members at low temperatures, e.g., beams, columns, and walls - Covers fundamental development of concepts, with the practical specification of materials and structures at low temperatures - Presents the latest research, undertaken at Tianjin University, P.R. China and the National University of Singapore, Singapore
Download or read book Tensile Testing 2nd Edition written by Joseph R. Davis and published by ASM International. This book was released on 2004 with total page 283 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Journal of Research of the National Bureau of Standards written by United States. National Bureau of Standards and published by . This book was released on 1941 with total page 912 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Chinese Standard GB GB T GBT JB JB T YY HJ NB HG QC SL SN SH JJF JJG CJ TB YD YS NY FZ JG QB SJ SY DL AQ CB GY JC JR JT written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2018-01-01 with total page 7263 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document provides the comprehensive list of Chinese National Standards and Industry Standards (Total 17,000 standards).
Download or read book NBS Special Publication written by and published by . This book was released on 1971 with total page 1064 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Code of Federal Regulations written by and published by . This book was released on 1994 with total page 906 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book An Index of U S Voluntary Engineering Standards written by United States. National Bureau of Standards and published by . This book was released on 1971 with total page 1038 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book GB T 37681 2019 Translated English of Chinese Standard GBT 37681 2019 GB T37681 2019 GBT37681 2019 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2019-08-31 with total page 24 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the ordering requirements, manufacturing process, technical requirements, inspection rules and test methods, acceptance and delivery, etc. of heavy steel castings. This Standard applies to heavy steel castings cast using the sand mold or casting mold with equivalent thermal conductivity as the sand mold.
Download or read book GB T 24510 2017 Translated English of Chinese Standard GBT 24510 2017 GB T24510 2017 GBT24510 2017 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2018-09-14 with total page 14 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the ordering contents, size, shape, weight and permissible deviation, technical requirements, test methods, inspection rules, package, mark, quality certificate and transportation of nickel alloy steel plates for low temperature pressure vessels. This Standard is applicable to the nickel alloy steel plates with thickness no greater than 150mm for the liquefied gas storage and transportation device.
Download or read book Conference on Materials and Design for Low temperature Service written by United States. Army. Corps of Engineers and published by . This book was released on 1953 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Code of Federal Regulations of the United States of America written by and published by . This book was released on 1994 with total page 866 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Code of Federal Regulations is the codification of the general and permanent rules published in the Federal Register by the executive departments and agencies of the Federal Government.
Download or read book GB GB T GBT Product Catalog Translated English of Chinese Standard All national standards GB GB T GBT GBZ written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2018-01-01 with total page 2809 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document provides the comprehensive list of Chinese National Standards - Category: GB; GB/T, GBT.
Download or read book GB T 713 1 2023 Translated English of Chinese Standard GB T 713 1 2023 GBT713 1 2023 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2024-01-13 with total page 25 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document stipulates the designation representation, order content, size, shape, weight, technical requirements, inspection rules, test methods, packaging, marking and quality certificate of steel plate, sheet and strip for pressure equipments. This document applies to the manufacturing and acceptance of steel plate, sheet and strip for pressure equipments (hereinafter referred to as steel plate, sheet and strip) such as boilers, pressure vessels, and pressure pipelines. The specific requirements for steel plate, sheet and strip for pressure equipment are given separately in the applicable documents of GB/T 713 (all parts).
