Download or read book Photovoltaic Module Reliability written by John H. Wohlgemuth and published by John Wiley & Sons. This book was released on 2020-01-08 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides practical guidance on the latest quality assurance and accelerated stress test methods for improved long-term performance prediction of PV modules This book has been written from a historical perspective to guide readers through how the PV industry learned what the failure and degradation modes of PV modules were, how accelerated tests were developed to cause the same failures and degradations in the laboratory, and then how these tests were used as tools to guide the design and fabrication of reliable and long-life modules. Photovoltaic Module Reliability starts with a brief history of photovoltaics, discussing some of the different types of materials and devices used for commercial solar cells. It then goes on to offer chapters on: Module Failure Modes; Development of Accelerated Stress Tests; Qualification Testing; and Failure Analysis Tools. Next, it examines the use of quality management systems to manufacture PV modules. Subsequent chapters cover the PVQAT Effort; the Conformity Assessment and IECRE; and Predicting PV Module Service Life. The book finishes with a look at what the future holds for PV. A comprehensive treatment of current photovoltaic (PV) technology reliability and necessary improvement to become a significant part of the electric utility supply system Well documented with experimental and practical cases throughout, enhancing relevance to both scientific community and industry Timely contribution to the harmonization of methodological aspects of PV reliability evaluation with test procedures implemented to certify PV module quality Written by a leading international authority in PV module reliability Photovoltaic Module Reliability is an excellent book for anyone interested in PV module reliability, including those working directly on PV module and system reliability and preparing to purchase modules for deployment.

Download or read book Metallic and Other Inorganic Coatings written by and published by . This book was released on 2015 with total page 8 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Corrosion and Protection written by Einar Bardal and published by Springer Science & Business Media. This book was released on 2007-06-14 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion and Protection is an essential guide for mechanical, marine and civil engineering students and also provides a valuable reference for practicing engineers. Bardal combines a description of practical corrosion processes and problems with a theoretical explanation of the various types and forms of corrosion, with a central emphasis on the connections between practical problems and basic scientific principles. This well thought-out introduction to corrosion science, with excellent examples and useful tables, is also extremely well illustrated with 167 diagrams and photographs. Readers with a limited background in chemistry can also find it accessible.

Download or read book Carbon Dioxide Utilization to Sustainable Energy and Fuels written by Inamuddin and published by Springer Nature. This book was released on 2021-11-30 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edited book provides an in-depth overview of carbon dioxide (CO2) transformations to sustainable power technologies. It also discusses the wide scope of issues in engineering avenues, key designs, device fabrication, characterizations, various types of conversions and related topics. It includes studies focusing on the applications in catalysis, energy conversion and conversion technologies, etc. This is a unique reference guide, and one of the detailed works is on this technology. The book is the result of commitments by leading researchers from various backgrounds and expertise. The book is well structured and is an essential resource for scientists, undergraduate, postgraduate students, faculty, R&D professionals, energy chemists and industrial experts.

Download or read book Electrophoretic Deposition of Nanomaterials written by James H. Dickerson and published by Springer Science & Business Media. This book was released on 2011-09-18 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive overview of contemporary basic research, emerging technology, and commercial and industrial applications associated with the electrophoretic deposition of nanomaterials. This presentation of the subject includes an historical survey, the underlying theory of electrophoresis, dielectrophoresis, and the colloidal deposition of materials. This is followed by an assessment of the experimental equipment and procedures for electrophoretic and dielectrophoretic aggregation, manipulation, and deposition of nanoparticles, nanotubes, and other nanomaterials. Additional chapters explore the specific science and technology of electrophoretic film formation, using widely studied and application-driven nanomaterials, such as carbon nanotubes, luminescent nanocrystals, and nano-ceramics. The concluding chapters explore industrial applications and procedures associated with electrophoretic deposition of nanomaterials.

Download or read book Techno Societal 2020 written by Prashant M. Pawar and published by Springer Nature. This book was released on 2021-06-19 with total page 1090 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, divided in two volumes, originates from Techno-Societal 2020: the 3rd International Conference on Advanced Technologies for Societal Applications, Maharashtra, India, that brings together faculty members of various engineering colleges to solve Indian regional relevant problems under the guidance of eminent researchers from various reputed organizations. The focus of this volume is on technologies that help develop and improve society, in particular on issues such as advanced and sustainable technologies for manufacturing processes, environment, livelihood, rural employment, agriculture, energy, transport, sanitation, water, education. This conference aims to help innovators to share their best practices or products developed to solve specific local problems which in turn may help the other researchers to take inspiration to solve problems in their region. On the other hand, technologies proposed by expert researchers may find applications in different regions. This offers a multidisciplinary platform for researchers from a broad range of disciplines of Science, Engineering and Technology for reporting innovations at different levels.

Download or read book Industrial Applications for Intelligent Polymers and Coatings written by Majid Hosseini and published by Springer. This book was released on 2016-05-14 with total page 715 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a comprehensive collaboration on intelligent polymers and coatings for industrial applications by worldwide researchers and specialists. The authors cover the basis and fundamental aspects of intelligent polymers and coatings, challenges, and potential mechanisms and properties. They include recent and emerging industrial applications in medical, smart textile design, oil and gas, electronic, aerospace, and automobile industries as well as other applications including microsystems, sensors, and actuators, among others. The authors discuss the potential for future research in these areas for improvement and growth of marketable applications of intelligent polymers and coatings.

Download or read book Electroless Copper and Nickel Phosphorus Plating written by W Sha and published by Elsevier. This book was released on 2011-01-01 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: Unlike electroplating, electroless plating allows uniform deposits of coating materials over all surfaces, regardless of size, shape and electrical conductivity. Electroless copper and nickel-phosphorus deposits provide protective and functional coatings in industries as diverse as electronics, automotive, aerospace and chemical engineering. This book discusses the latest research in electroless depositions.After an introductory chapter, part one focuses on electroless copper depositions reviewing such areas as surface morphology and residual stress, modelling surface structure, adhesion strength of electroless copper deposit, electrical resistivity and applications of electroless copper deposits. Part two goes on to look at electroless nickel-phosphorus depositions with chapters on the crystallisation of nickel-phosphorus deposits, modelling the thermodynamics and kinetics of crystallisation of nickel-phosphorus deposits, artificial neural network (ANN) modelling of crystallisation temperatures, hardness evolution of nickel-phosphorus deposits and applications of electroless nickel-phosphorus plating.Written by leading experts in the field Electroless copper and nickel-phosphorus plating: Processing, characterisation and modelling is an invaluable guide for researchers studying electroless deposits or materials science as well as for those working in the chemical, oil and gas, automotive, electronics and aerospace industries. Written by leading experts in the field, this important book reviews the deposition process and the key properties of electroless copper and nickel-phosphorus deposits as well as their practical applications Chapters review areas such as surface morphology and residual stress, modelling surface structure, crystallisation of nickel-phosphorus deposits and hardness evolution An invaluable guide for researchers studying electroless deposits or materials science as well as for those working in the chemical, oil and gas, automotive, electronics and aerospace industries

Download or read book Nickel and Chromium Plating written by J. K. Dennis and published by Butterworth-Heinemann. This book was released on 2013-10-22 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nickel and Chromium Plating, Second Edition, does not merely update the first edition but also places additional emphasis on certain methods that have achieved increased industrial use in the 14 years since the first edition was published. The book begins by tracing the history of nickel and chromium plating. This is followed by a discussion of the electrochemistry of electrodeposition from aqueous electrolyte solutions. Separate chapters cover topics such as autocatalytic (electroless) nickel deposition; nickel plating onto aluminum and other difficult substrates; plating onto plastics and high-speed plating; the deposition of various nickel alloys for decorative and functional applications; composite coatings; and tampon (brush) plating. This book will be helpful to those new to the plating industry; those experienced in the industry will find that this revised version enables them to keep up-to-date with the latest developments in this specialized technology.

Download or read book Soot Formation in Combustion written by Henning Bockhorn and published by Springer Science & Business Media. This book was released on 2013-03-08 with total page 595 pages. Available in PDF, EPUB and Kindle. Book excerpt: Soot Formation in Combustion represents an up-to-date overview. The contributions trace back to the 1991 Heidelberg symposium entitled "Mechanism and Models of Soot Formation" and have all been reedited by Prof. Bockhorn in close contact with the original authors. The book gives an easy introduction to the field for newcomers, and provides detailed treatments for the specialists. The following list of contents illustrates the topics under review:

Download or read book Advanced Nanomaterials and Nanotechnology written by P. K. Giri and published by Springer Science & Business Media. This book was released on 2013-03-17 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanoscale science and technology have occupied centre stage globally in modern scientific research and discourses in the early twenty first century. The enabling nature of the technology makes it important in modern electronics, computing, materials, healthcare, energy and the environment. This volume contains selected articles presented (as Invited/Oral/Poster presentations) at the 2nd international conference on advanced materials and nanotechnology (ICANN-2011) held recently at the Indian Institute of Technology Guwahati, during Dec 8-10, 2011. The list of topics covered in this proceedings include: Synthesis and self assembly of nanomaterials Nanoscale characterisation Nanophotonics & Nanoelectronics Nanobiotechnology Nanocomposites F Nanomagnetism Nanomaterials for Energy Computational Nanotechnology Commercialization of Nanotechnology The conference was represented by around 400 participants from several countries including delegates invited from USA, Germany, Japan, UK, Taiwan, Italy, Singapore, India etc.

Download or read book Electrochemistry for Materials Science written by Walfried Plieth and published by Elsevier. This book was released on 2008-01-08 with total page 433 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the principles of electrochemistry with a special emphasis on materials science. This book is clearly organized around the main topic areas comprising electrolytes, electrodes, development of the potential differences in combining electrolytes with electrodes, the electrochemical double layer, mass transport, and charge transfer, making the subject matter more accessible.In the second part, several important areas for materials science are described in more detail. These chapters bridge the gap between the introductory textbooks and the more specialized literature. They feature the electrodeposition of metals and alloys, electrochemistry of oxides and semiconductors, intrinsically conducting polymers, and aspects of nanotechnology with an emphasis on the codeposition of nanoparticles.This book provides a good introduction into electrochemistry for the graduate student. For the research student as well as for the advanced reader there is sufficient information on the basic problems in special chapters. The book is suitable for students and researchers in chemistry, physics, engineering, as well as materials science.- Introduction into electrochemistry- Metal and alloy electrodeposition- Oxides and semiconductors, corrosion- Intrinsically conducting polymers- Codeposition of nanoparticles, multilayers

Download or read book Amorphous and Nano Alloys Electroless Depositions written by Bangwei Zhang and published by Elsevier. This book was released on 2015-12-07 with total page 774 pages. Available in PDF, EPUB and Kindle. Book excerpt: Amorphous and Nano Alloys Electroless Depositions: Technology, Theory, Structure and Property describes the whole development and the most important subjects (technology, theory, structure and property) up to date of electroless plating (EP). The author concentrates on the fundamental scientific and academic problems (principle, mechanism and theory) in EP today.Based on the history of EP, this valuable reference describes lots of new EP processes, including electroless Fe based alloy system deposits, formation and theoretical description of electroless alloys, microscopic theory of electroless plating deposits, microscopic structures and surface morphology of electroless deposits, and weldability property of electroless deposits. - Focus on the fundamental scientific and academic problems (principles, mechanisms and theory) in electroless plating - The book gives a very good overview of the research and development in this field and each chapter is fully referenced - Detailed analysis and review of the current data, logically structured for ease of use

Download or read book Handbook of Non Ferrous Metal Powders written by Oleg D Neikov and published by Elsevier. This book was released on 2009-02-24 with total page 644 pages. Available in PDF, EPUB and Kindle. Book excerpt: The manufacture and use of the powders of non-ferrous metals has been taking place for many years in what was previously Soviet Russia, and a huge amount of knowledge and experience has built up in that country over the last forty years or so. Although accounts of the topic have been published in the Russian language, no English language account has existed until now.Six prominent academics and industrialists from the Ukraine and Russia have produced this highly-detailed account which covers the classification, manufacturing methods, treatment and properties of the non-ferrous metals ( aluminium, titanium, magnesium, copper, nickel, cobalt, zinc, cadmium, lead, tin, bismuth, noble metals and earth metals).The result is a formidable reference source for those in all aspects of the metal powder industry. - Covers the manufacturing methods, properties and importance of the following metals: aluminium, titanium, magnesium, copper, nickel, cobalt, zinc, cadmium, noble metals, rare earth metals, lead, tin and bismuth - Expert Russian team of authors, all very experienced - English translation and update of book previously published in Russian

Download or read book Handbook of Electrochemistry written by Cynthia G. Zoski and published by Elsevier. This book was released on 2007-02-07 with total page 935 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electrochemistry plays a key role in a broad range of research and applied areas including the exploration of new inorganic and organic compounds, biochemical and biological systems, corrosion, energy applications involving fuel cells and solar cells, and nanoscale investigations. The Handbook of Electrochemistry serves as a source of electrochemical information, providing details of experimental considerations, representative calculations, and illustrations of the possibilities available in electrochemical experimentation. The book is divided into five parts: Fundamentals, Laboratory Practical, Techniques, Applications, and Data. The first section covers the fundamentals of electrochemistry which are essential for everyone working in the field, presenting an overview of electrochemical conventions, terminology, fundamental equations, and electrochemical cells, experiments, literature, textbooks, and specialized books. Part 2 focuses on the different laboratory aspects of electrochemistry which is followed by a review of the various electrochemical techniques ranging from classical experiments to scanning electrochemical microscopy, electrogenerated chemiluminesence and spectroelectrochemistry. Applications of electrochemistry include electrode kinetic determinations, unique aspects of metal deposition, and electrochemistry in small places and at novel interfaces and these are detailed in Part 4. The remaining three chapters provide useful electrochemical data and information involving electrode potentials, diffusion coefficients, and methods used in measuring liquid junction potentials. * serves as a source of electrochemical information * includes useful electrochemical data and information involving electrode potentials, diffusion coefficients, and methods used in measuring liquid junction potentials * reviews electrochemical techniques (incl. scanning electrochemical microscopy, electrogenerated chemiluminesence and spectroelectrochemistry)

Download or read book Extractive Metallurgy of Nickel Cobalt and Platinum Group Metals written by Frank Crundwell and published by Elsevier. This book was released on 2011-07-18 with total page 623 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes and explains the methods by which three related ores and recyclables are made into high purity metals and chemicals, for materials processing. It focuses on present day processes and future developments rather than historical processes. Nickel, cobalt and platinum group metals are key elements for materials processing. They occur together in one book because they (i) map together on the periodic table (ii) occur together in many ores and (iii) are natural partners for further materials processing and materials manufacturing. They all are, for example, important catalysts – with platinum group metals being especially important for reducing car and truck emissions. Stainless steels and CoNiFe airplane engine super alloys are examples of practical usage. The product emphasises a sequential, building-block approach to the subject gained through the author's previous writings (particularly Extractive Metallurgy of Copper in four editions) and extensive experience. Due to the multiple metals involved and because each metal originates in several types of ore – e.g. tropical ores and arctic ores this necessitates a multi-contributor work drawing from multiple networks and both engineering and science. - Synthesizes detailed review of the fundamental chemistry and physics of extractive metallurgy with practical lessons from industrial consultancies at the leading international plants - Discusses Nickel, Cobalt and Platinum Group Metals for the first time in one book - Reviews extraction of multiple metals from the same tropical or arctic ore - Industrial, international and multidisciplinary focus on current standards of production supports best practice use of industrial resources

Download or read book Corrosion and Fouling Control in Desalination Industry written by Viswanathan S. Saji and published by Springer. This book was released on 2021-02-06 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses two critical problems that plague materials that make up components in both desalination and cooling water systems: corrosion, and fouling. The book addresses various types and components of industrial desalination technologies with solutions for controlling corrosion, scaling and biofouling. Issues unique to desalination systems, vital for the production of clean water, are considered as well. Green technologies are discussed throughout, along with environmental and economic considerations. The book presents solutions to the problems encountered by internal and external parts of these systems and will aid professionals that design, operate, and maintain them. It will be valuable to professionals in the materials, corrosion, electrochemical and wastewater industries, as well as chemical engineers. Addresses the corrosion issues facing the conventional and modern water desalination systems; Discusses the causes and remediation of problems caused by corrosion, scaling, and biofouling in water treatment; Offers green solutions, thereby minimizing environmental impact while increasing control and productivity of water systems; Suitable for professionals working with water desalination plants, materials scientists and corrosion engineers.