Download or read book Metal Recycling Experience at Los Alamos National Laboratory Reuse Release and Recycle of Metals from Radiological Control Areas written by and published by . This book was released on 1997 with total page 8 pages. Available in PDF, EPUB and Kindle. Book excerpt: Approximately 15% of the Low-Level Waste (LLW) produced at Los Alamos consists of scrap metal equipment and materials. The majority of this material is produced by decommissioning and the modification of existing facilities. To reduce this waste stream, Department of Energy Headquarters, EM-77 Office, sponsored the Reuse, Recycle, and Release of Metals from Radiological Control Areas High Return on Investment (ROI) Project to implement recycle, reuse, and release of scrap metal at the laboratory. The goal of this project was to develop cost effective alternatives to LLW disposal of scrap metal and to avoid the disposal of 2,400 m3 of scrap metal. The ROI for this project was estimated at 948%. The ROI project was funded in March 1996 and is scheduled for completion by October 1997. At completion, a total of 2,400 m3 of LLW avoidance will have been accomplished and a facility to continue recycling activities will be operational. This paper will present the approach used to develop effective alternatives for scrap metal at Los Alamos and then discuss the tasks identified in the approach in detail. Current scrap metal inventory, waste projections, alternatives to LLW disposal, regulatory guidance, and efforts to institutionalize the alternatives to LLW disposal will be discussed in detail.
Download or read book The Office of Environmental Management Technical Reports A Bibliography written by and published by DIANE Publishing. This book was released on 2001 with total page 245 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Office of Environmental Management's (EM) technical reports bibliography is an annual publication that contains information on scientific and technical reports sponsored by the Office of Environmental Management added to the Energy Science and Technology Database from July 1, 1994 through June 30, 1995. This information is divided into the following categories: Focus Areas, Cross-Cutting Programs, and Support Programs. In addition, a category for general information is included. EM's Office of Science and Technology sponsors this bibliography.
Download or read book Expanded Recycling at Los Alamos National Laboratory written by and published by . This book was released on 1996 with total page 10 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Pollution Prevention Program Office has increased recycling activities, reuse, and options to reduce the solid waste streams through streamlining efforts that applied best management practices. The program has prioritized efforts based on volume and economic considerations and has greatly increased Los Alamos National Laboratory's (LANL's) recycle volumes. The Pollution Prevention Program established and chairs a Solid Waste Management Solutions Group to specifically address and solve problems in nonradioactive, Resource Conservation and Recovery Act (RCRA), state-regulated, and sanitary and industrial waste streams (henceforth referred to as sanitary waste in this paper). By identifying materials with recycling potential, identifying best management practices and pathways to return materials for reuse, and introducing the concept and practice of {open_quotes}asset management, {open_quotes} the Group will divert much of the current waste stream from disposal. This Group is developing procedures, agreements, and contracts to stage, collect, sort, segregate, transport and process materials, and is also garnering support for the program through the involvement of upper management, facility managers, and generators.
Download or read book Formerly Utilized MED AEC Sites Remedial Action Program written by Los Alamos National Laboratory and published by . This book was released on 1981 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Energy Use Patterns for Metal Recycling written by Charles L. Kusik and published by . This book was released on 1978 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fourth International Symposium on Recycling of Metals and Engineered Materials written by Donald L. Stewart, Jr. and published by John Wiley & Sons. This book was released on 2013-10-07 with total page 1244 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings collection continues the tradition established by earlier TMS Recycling Meetings in this series by presenting fundamental and practical aspects of recycling metals and engineered materials. This collection concentrates on fundamental and applied research and industrial practices in the recycling of a wide variety of materials including aluminum scrap recycling; aluminum dross processing; aluminum by-product recovery; automotive recycling; magnesium & titanium recycling; EAF dust processing; secondary zinc; secondary lead; secondary copper, nickel & coba< spent catalyst recycling; precious metals recycling; refractory recycling; and electronics/plating.
Download or read book Recycling of Metals and Materials written by Ruth K. Seidman and published by . This book was released on 1972 with total page 16 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Resource Recovery and Recycling from Waste Metal Dust written by Daniel Ogochukwu Okanigbe and published by Springer Nature. This book was released on 2023-03-15 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book examines resource recovery and recycling from waste metal dust, including currently used techniques for waste processing and recycling and their applications, with practical examples and economic potentials of the processes. The focus of this book is on resource recovery by suitable treatments and techniques, including those of recovery by-products. For the first time, this book provides a comprehensive, one-stop reference including seminal principles and methods, the advantages and disadvantages of the processes discussed, and the economics of the technology. It will serve as a technical reference for working scientists and engineers, while serving as an educational reference to students studying the waste recovery of metals.
Download or read book Recycled Metals in the United States written by and published by . This book was released on 1993 with total page 84 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Formerly Utilized MED AEC Sites Remedial Action Program written by Los Alamos Scientific Laboratory and published by . This book was released on 1979 with total page 76 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Recycling at Los Alamos National Laboratory written by and published by . This book was released on 2014 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book U S Department of Energy National Center of Excellence for Metals Recycle written by and published by . This book was released on 1998 with total page 10 pages. Available in PDF, EPUB and Kindle. Book excerpt: The US Department of Energy (DOE) National Center of Excellence for Metals Recycle has recently been established. The vision of this new program is to develop a DOE culture that promotes pollution prevention by considering the recycle and reuse of metal as the first and primary disposition option and burial as a last option. The Center of Excellence takes the approach that unrestricted release of metal is the first priority because it is the most cost-effective disposition pathway. Where this is not appropriate, restricted release, beneficial reuse, and stockpile of ingots are considered. Current recycling activities include the sale of 40,000 tons of scrap metal from the East Tennessee Technology Park (formerly K-25 Plant) K-770 scrap yard, K-1064 surplus equipment and machinery, 7,000 PCB-contaminated drums, 12,000 tons of metal from the Y-l2 scrap yard, and 1,000 metal pallets. In addition, the Center of Excellence is developing a toolbox for project teams that will contain a number of specific tools to facilitate metals recycle. This Internet-based toolbox will include primers, computer programs, and case studies designed to help sites to perform life cycle analysis, perform ALARA (As Low As is Reasonably Achievable) analysis for radiation exposures, provide pollution prevention information and documentation, and produce independent government estimates. The use of these tools is described for two current activities: disposition of scrap metal in the Y-12 scrapyard, and disposition of PCB-contaminated drums.
Download or read book Resource Recovery and Recycling from Metallurgical Wastes written by S.R. Ramachandra Rao and published by Elsevier. This book was released on 2011-08-29 with total page 581 pages. Available in PDF, EPUB and Kindle. Book excerpt: Resource recovery and recycling from millions of tons of wastes produced from industrial activities is a continuing challenge for environmental engineers and researchers. Demand for conservation of resources, reduction in the quantity of waste and sustainable development with environmental control has been growing in every part of the world. Resource Recovery and Recycling from Metallurgical Wastes brings together the currently used techniques of waste processing and recycling, their applications with practical examples and economic potentials of the processes. Emphasis is on resource recovery by appropriate treatment and techniques. Material on the subject is scatterend in waste management and environmental related journals, conference volumes and government departmental technical reports. This work serves as a source book of information and as an educational technical reference for practicing scientists and engineers, as well as for students. Describes the currently used and potential techniques for the recovery of valuable resources from mineral and metallurgical wastes Discusses the applications to specific kinds of wastes with examples from current practices, as well as eht economics of the processes Presents recent and emerging technologies of potentials in metal recycling and by-product utilization
Download or read book Metals in Wastes written by Karolina Wieszczycka and published by Walter de Gruyter GmbH & Co KG. This book was released on 2018-07-23 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metals in Wastes is an excellent guide for scientists, students, engineers, chemists, and industrial chemists who are looking for knowledge of the main sources of metals in industrial wastes. Metals are valuable materials that can be recycled again and again without degrading their properties. The recycling of metals enables us to preserve natural resources while requiring less energy to process than the manufacture of new products using virgin raw materials. A team of experts reviews the state-of-the-art and provides the readers not only with a comprehensive in-depth overview of the main composition of wastes but also discloses innovative methods which have been applied for recovery of critical and valuable metals in petrochemical industry, rubber, energy and automotive industries. This know-how could be considered as a useful reference tool for moving towards the zero-waste economy. Additionally, the book describes the economic aspects of metals recovery from various sources. This is essential for those already involved in the metals business and also for the financial, investment and advisory community internationally.
Download or read book The Physical Separation and Recovery of Metals from Waste Volume One written by Alan Veasey and published by CRC Press. This book was released on 1993-09-10 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with the physical processes used for the separation of secondary metals from waste sources. The introduction briefly considers the history of the secondary metals industries, defines the terms used in materials recycling and discusses the potential for resource recovery and improved processing. A comprehensive survey is given of the unit operations employed for metals recovery and reclamation, and this is followed by detailed descriptions of processes used to treat fragmentized metal wastes and granulated metal wastes. The final chapter reviews the processing of urban wastes for metals recovery, and gives details of modern plants and practices. The volume aims to bring together technical information on metals recovery from a wide range of sources in order to give a unified review of an important engineering and environmental topic.
Download or read book Biohydrometallurgical Recycling of Metals from Industrial Wastes written by Hong Hocheng and published by CRC Press. This book was released on 2017-09-11 with total page 191 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although many available metal recycling methods are simple and fast, they are also expensive and cause environmental pollution. Biohydrometallurgical processing of metals offers an alternative to overcome these issues, as the use of biological means not only helps to conserve dwindling ore resources but also fulfills the need for the unambiguous need to extract metals in nonpolluting, low-energy, and low-cost way. This book covers biohydrometallurgy and its application in the recovery of metals from secondary sources like wastes. It aims to provide readers with a comprehensive overview of different wastes for metal recovery and biological treatment methods that are both environmentally friendly and economically viable.
Download or read book Transitioning to Off site Disposal at Los Alamos National Laboratory written by and published by . This book was released on 2011 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
