Download or read book Metal Oxide Nanowires as Building Blocks for Optoelectronic Devices written by Andreea Costas and published by . This book was released on 2019 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal oxide nanowires have become the new building blocks for the next generation optoelectronic devices due to their specific features such as quantum confinement and high aspect ratio. Thus, they can be integrated as active components in diodes, field effect transistors, photodetectors, sensors, solar cells and so on. ZnO, a n-type semiconductor with a direct wide band gap (3.3¬†eV) and CuO, a p-type semiconductor with a narrow band gap (1.2,Äì1.5¬†eV), are two metal oxides which were recently in the spotlight of the researchers for applications in the optoelectronic devices area. Therefore, in this chapter we focused on ZnO and CuO nanowires, the metal oxides nanowire arrays being prepared by straightforward wet and dry methods. Further, in order to emphasize their intrinsic transport properties, lithographic and thin films deposition techniques were used to integrate single ZnO and CuO nanowires into diodes and field effect transistors.
Download or read book Nanowires written by Xihong Peng and published by BoD – Books on Demand. This book was released on 2021-07-14 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: Low-dimensional structures have attracted extensive research interest due to their promising applications in nanotechnology. These low-dimensional materials have the potential to make revolutionary changes in science and technology because a reduction in size not only enables a faster speed and greater computing power but also helps reduce device form factors. As such, this book examines the behaviors of oxide nanowires, group III–V compounds, and other nanowires, including basic Si nanowires, metallic wires, and complex geometrical nanowires.
Download or read book Semiconductor Nanowires written by J Arbiol and published by Elsevier. This book was released on 2015-03-31 with total page 573 pages. Available in PDF, EPUB and Kindle. Book excerpt: Semiconductor nanowires promise to provide the building blocks for a new generation of nanoscale electronic and optoelectronic devices. Semiconductor Nanowires: Materials, Synthesis, Characterization and Applications covers advanced materials for nanowires, the growth and synthesis of semiconductor nanowires—including methods such as solution growth, MOVPE, MBE, and self-organization. Characterizing the properties of semiconductor nanowires is covered in chapters describing studies using TEM, SPM, and Raman scattering. Applications of semiconductor nanowires are discussed in chapters focusing on solar cells, battery electrodes, sensors, optoelectronics and biology. - Explores a selection of advanced materials for semiconductor nanowires - Outlines key techniques for the property assessment and characterization of semiconductor nanowires - Covers a broad range of applications across a number of fields
Download or read book The Chemistry of Nanostructured Materials written by Peidong Yang and published by World Scientific. This book was released on 2011 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a sequel to the first volume of The Chemistry of Nanostructured Materials. It covers the most exciting developments in the nanostructured materials field for the past five to ten years, with a particular focus on their applications in energy conversion and energy storage. Prominent authors of recognized authority in the field contribute their expertise in the review chapters.
Download or read book Nanowires for Energy Applications written by and published by Academic Press. This book was released on 2018-06-05 with total page 550 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanowires for Energy Applications, Volume 98, covers the latest breakthrough research and exciting developments in nanowires for energy applications. This volume focuses on various aspects of Nanowires for Energy Applications, presenting interesting sections on Electrospun semiconductor metal oxide nanowires for energy and sensing applications, Integration into flexible and functional materials, Nanowire Based Bulk Heterojunction Solar Cells, Semiconductor Nanowires for Thermoelectric Generation, Energy Scavenging: Mechanical, Thermoelectric, and Nanowire synthesis/growth methods, and more. - Features the latest breakthroughs and research and development in nanowires for energy applications - Covers a broad range of topics, including a wide variety of materials and many important aspects of solar fuels - Includes in-depth discussions on materials design, growth and synthesis, engineering, characterization and photoelectrochemical studies
Download or read book Optical Properties of Metal Oxide Nanostructures written by Vijay Kumar and published by Springer Nature. This book was released on 2023-10-25 with total page 515 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights the optical properties of metal oxides at both the fundamental and applied level and their use in various applications. The book offers a basic understanding of the optical properties and related spectroscopic techniques essential for anyone interested in learning about metal oxide nanostructures. This is partly due to the fact that optical properties are closely associated with other properties and functionalities (e.g., electronic, magnetic, and thermal), which are of essential significance to many technological applications, such as optical data communications, imaging, lighting, and displays, life sciences, health care, security, and safety. The book also highlights the fundamentals and systematic developments in various optical techniques to achieve better characterization, cost-effective, user-friendly approaches, and most importantly, state-of-the-art developing methodologies for various scientific and technological applications. It provides an adequate understanding of the imposed limitations and highlights the prospects and challenges associated with optical analytical methods to achieve the desired performance in targeted applications.
Download or read book Metal Oxides for Optoelectronics and Optics Based Medical Applications written by Suresh Sagadevan and published by Elsevier. This book was released on 2022-07-01 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Oxides for Optoelectronics and Optics-based Medical Applications reviews recent advances in metal oxides and their mechanisms for optoelectronic, photoluminescent and medical applications. In addition, the book examines the integration of key chemistry concepts with nanoelectronics that can improve performance in a diverse range of applications. Sections place a strong emphasis on synthesis processes that can improve the metal oxides' physical properties and the reflected surface chemical changes that can impact their performance in various devices like light-emitting diodes, luminescence materials, solar cells, etc. Finally, the book discusses the challenges associated with the handling and maintenance of metal oxides crystalline properties. This book will be suitable for academics and those working in R&D in industry looking to learn more about cheaper and more effective methods to produce metal oxides for use in the fields of electronics, photonics, biophotonics and engineering. - Reviews the latest advances in the utilization of metal oxide materials in photonics, optoelectronics and optics-based medical applications - Considers the most relevant synthesis strategies for the development of high-performing metal oxide-based devices - Addresses a wide range of metal oxides including photonic crystals, fibers, metastructures, glasses, and more
Download or read book Semiconductor Nanocrystals and Metal Nanoparticles written by Tupei Chen and published by CRC Press. This book was released on 2016-10-14 with total page 732 pages. Available in PDF, EPUB and Kindle. Book excerpt: Semiconductor nanocrystals and metal nanoparticles are the building blocks of the next generation of electronic, optoelectronic, and photonic devices. Covering this rapidly developing and interdisciplinary field, the book examines in detail the physical properties and device applications of semiconductor nanocrystals and metal nanoparticles. It begins with a review of the synthesis and characterization of various semiconductor nanocrystals and metal nanoparticles and goes on to discuss in detail their optical, light emission, and electrical properties. It then illustrates some exciting applications of nanoelectronic devices (memristors and single-electron devices) and optoelectronic devices (UV detectors, quantum dot lasers, and solar cells), as well as other applications (gas sensors and metallic nanopastes for power electronics packaging). Focuses on a new class of materials that exhibit fascinating physical properties and have many exciting device applications. Presents an overview of synthesis strategies and characterization techniques for various semiconductor nanocrystal and metal nanoparticles. Examines in detail the optical/optoelectronic properties, light emission properties, and electrical properties of semiconductor nanocrystals and metal nanoparticles. Reviews applications in nanoelectronic devices, optoelectronic devices, and photonic devices.
Download or read book Ultrathin Metal Hydroxide Oxide Nanowires written by Hemali Rathnayake and published by . This book was released on 2020 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The fundamental understanding of transition metal oxides nanowires,Äô crystal growth to control their anisotropy is critical for their applications in miniature devices. However, such studies are still in the premature stage. From an industrial point of view, the most exciting and challenging area of devices today is having the balance between the performance and the cost. Accordingly, it is essential to pay attention to the controlled cost-effective and greener synthesis of ultrathin TMOS NWs for industrial optoelectronic applications. This chapter provides a comprehensive summary of fundamental principles on the preperation methods to make dimensionality controlled anisotropic nanowires, their crystal growth studies, and optical and electrical properties. The chapter particularly addresses the governing theories of crystal growth processes and kinetics that controls the anisotropy and dimensions of nanowires. Focusing on the oriented attachment (OA) mechanism, the chapter describes the OA mechanism, nanocrystal,Äôs self-assembly, interparticle interactions, and OA-directed crystal growth to improve the state-of-the art kinetic models. Finally, we provide the future perspective of ultrathin TMOS NWs by addressing their current challenges in optoelectronic applications. It is our understanding that the dimension, and single crystallinity of nanowires are the main contributors for building all functional properties, which arise from quasi-1-D confinement of nanowire growth.
Download or read book 21st Century Nanostructured Materials written by Phuong Pham and published by BoD – Books on Demand. This book was released on 2022-04-20 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanostructured materials (NMs) are attracting interest as low-dimensional materials in the high-tech era of the 21st century. Recently, nanomaterials have experienced breakthroughs in synthesis and industrial and biomedical applications. This book presents recent achievements related to NMs such as graphene, carbon nanotubes, plasmonic materials, metal nanowires, metal oxides, nanoparticles, metamaterials, nanofibers, and nanocomposites, along with their physical and chemical aspects. Additionally, the book discusses the potential uses of these nanomaterials in photodetectors, transistors, quantum technology, chemical sensors, energy storage, silk fibroin, composites, drug delivery, tissue engineering, and sustainable agriculture and environmental applications.
Download or read book Metal Oxide Nanocomposite Thin Films for Optoelectronic Device Applications written by Rayees Ahmad Zargar and published by John Wiley & Sons. This book was released on 2023-11-07 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: METAL OXIDE NANOCOMPOSITE THIN FILMS FOR OPTOELECTRONIC DEVICE APPLICATIONS The book provides insight into the fundamental aspects, latest research, synthesis route development, preparation, and future applications of metal oxide nanocomposite thin films. The fabrication of thin film-based materials is important to the future production of safe, efficient, and affordable energy as the devices convert sunlight into electricity. Thin film devices allow excellent interface engineering for high-performance printable solar cells as their structures are highly reliable and stand-alone systems can provide the required megawatts. They have been used as power sources in solar home systems, remote buildings, water pumping, megawatt-scale power plants, satellites, communications, and space vehicles. Metal Oxide Nanocomposite Thin Films for Optoelectronic Device Applications covers the basics of advanced nanometal oxide-based materials, their synthesis, characterization, and applications, and all the updated information on optoelectronics. Topics discussed include the implications of metal oxide thin films, which are critical for device fabrications. It provides updated information on the economic aspect and toxicity, with great focus paid to display applications, and covers some core areas of nanotechnology, which are particularly concerned with optoelectronics and the available technologies. The book concludes with insights into the role of nanotechnology and the physics behind photovoltaics. Audience The book will be an important volume for electronics and electrical engineers, nanotechnologists, materials scientists, inorganic chemists in academic research, and those in industries, exploring the applications of nanoparticles in semiconductors, power electronics, and more.
Download or read book Nanowires and Nanobelts written by Zhong Lin Wang and published by Springer Science & Business Media. This book was released on 2005-09-29 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume 1, Metal and Semiconductor Nanowires covers a wide range of materials systems, from noble metals (such as Au, Ag, Cu), single element semiconductors (such as Si and Ge), compound semiconductors (such as InP, CdS and GaAs as well as heterostructures), nitrides (such as GaN and Si3N4) to carbides (such as SiC). The objective of this volume is to cover the synthesis, properties and device applications of nanowires based on metal and semiconductor materials. The volume starts with a review on novel electronic and optical nanodevices, nanosensors and logic circuits that have been built using individual nanowires as building blocks. Then, the theoretical background for electrical properties and mechanical properties of nanowires is given. The molecular nanowires, their quantized conductance, and metallic nanowires synthesized by chemical technique will be introduced next. Finally, the volume covers the synthesis and properties of semiconductor and nitrides nanowires.
Download or read book Nanotubes and Nanowires written by Chintamani Nagesa Ramachandra Rao and published by Royal Society of Chemistry. This book was released on 2005 with total page 21 pages. Available in PDF, EPUB and Kindle. Book excerpt: Research and literature on nanomaterials has exploded in volume in recent years. Nanotubes (both of carbon and inorganic materials) can be made in a variety of ways, and they demonstrate a wide range of interesting properties. Many of these properties, such as high mechanical strength and interesting electronic properties relate directly to potential applications. Nanowires have been made from a vast array of inorganic materials and provide great scope for further research into their properties and possible applications. This book provides a comprehensive and up-to-date survey of the research areas of carbon nanotubes, inorganic nanotubes and nanowires including: synthesis; characterisation; properties; applications Nanotubes and Nanowires includes an extensive list of references and is ideal both for graduates needing an introduction to the field of nanomaterials as well as for professionals and researchers in academia and industry.
Download or read book One Dimensional Nanostructures written by Zhiming M Wang and published by Springer Science & Business Media. This book was released on 2008-07-20 with total page 335 pages. Available in PDF, EPUB and Kindle. Book excerpt: One-dimensional (1D) nanostructures, including nanowires, nanotubes and quantum wires, have been regarded as the most promising building blocks for nanoscale electronic and optoelectronic devices. This book presents exciting, state-of-the-art developments in synthesis and properties of 1D nanostructures with many kinds of morphologies and compositions as well as their considerable impact on spintronics, information storage, and the design of field-effect transistors.
Download or read book Nanowires and Nanobelts Materials Properties and Devices written by Zhong Lin Wang and published by Springer Science & Business Media. This book was released on 2010-04-30 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume focuses on the synthesis, properties and applications of nanowires and nanobelts based on functional materials. Novel devices and applications made from functional oxide nanowires and nanobelts will be presented first, showing their unique properties and applications.
Download or read book Nano Metal Oxides written by B. Karthikeyan and published by Springer Nature. This book was released on 2023-03-07 with total page 122 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights theoretical and experimental facts about selective nano-metal oxides. TiO2 ,ZnO and transition metal oxides which are known to be semiconductors and find applications in various fields. This book presents about recent findings like photo catalysis, sensing ,coating and biomedical applications. Therapeutic and future applications that are recently been reported of various metal oxides are presented in this book.
Download or read book Nanotubes and Nanowires written by C N R Rao and published by Royal Society of Chemistry. This book was released on 2021-10-27 with total page 611 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanotubes (both of carbon and inorganic materials) can be made in a variety of ways, demonstrating a wide range of fascinating properties. Many of these, such as high mechanical strength and interesting electronic properties relate directly to potential applications. Nanowires have been made from a vast array of inorganic materials and provide great scope for further research into their properties and possible applications. Chapters in this book systematically describe the fundamentals and applications of nanotubes and nanowires, providing a comprehensive and up-to-date survey of the research area, including synthesis, characterisation, properties and applications. This new edition of Nanotubes and Nanowires includes an extensive list of references and is ideal both for graduates needing an introduction to the field of nanomaterials as well as for professionals and researchers in academia and industry. Review of Nanotubes and Nanowires 1st Edition: “This book does a truly admirable job of summarizing the literature in this rapidly changing field.” Journal of the American Chemical Society, 2006, 128, 4163-4164 Review of Nanotubes and Nanowires 2nd Edition: “Rao and Govindaraj do a superb job of distilling the huge literature on inorganic nanotubes and nanowires.” Chemistry & Industry, 2011, 24, 27
