Download or read book Metal Micro Droplet Based 3D Printing Technology written by Lehua Qi and published by Springer Nature. This book was released on 2023-05-04 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces a unique 3D printing method that prints metal parts by ejecting metal micro-droplets: a low-cost, contactless, and environmentally friendly 3D printing technology. This book follows a deductive approach to describe the fundamentals of metal droplet-based 3D printing and reveal the relationships and unique features among multiple specific techniques used in droplet-based 3D printing. It starts with a general description of the principles and techniques involved in this technology and then focuses on the details of several specific metal droplet-ejection methods. Next, it puts forward various specific 3D printing techniques and illustrates their applications. This book is a valuable reference for scholars and researchers who work on metal 3D printing and other related areas. It is also used as a textbook for college graduate courses in mechanical manufacturing and material processing.
Download or read book Inkjet Based 3D Additive Manufacturing of Metals written by Mojtaba Salehi and published by Materials Research Forum LLC. This book was released on 2018-01-02 with total page 158 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive Manufacturing (AM) is a highly promising rapid manufacturing process. Based on incremental layer-upon-layer deposits, three dimensional components of high geometrical complexity can be produced; applications ranging from aerospace and automotive to biomedical industries. Laser, electron beam and wire-based techniques are reviewed. Particular emphasis is placed on 3D inkjet printing of metals, which is reviewed here in great depth and for the first time. This is an ambient temperature technology which offers some unique advantages for printing metals and alloys, as well as composite and functionally graded materials. Material selection guidelines are presented and the various deposition techniques and post-printing treatments are discussed; together with the resulting properties of the printed components: Density, shrinkage, resolution and surface roughness, porosity-related and mechanical properties, as well as biological properties The various metal printing techniques are compared with each other and case studies are referred to. Additive Manufacturing, Inkjet Printing of Metals, 3D Printed Components, Laser Melting, Laser Sintering, Laser Powder Deposition, Material Selection Guidelines for Inkjet Printing of Metals, Biological Properties of AM Metals, Surface Properties of AM Metals, Porosity of AM Metals, Shrinkage of AM Metals, Mechanical of Properties of AM Metals, Density of Properties of AM Metals
Download or read book Springer Handbook of Additive Manufacturing written by Eujin Pei and published by Springer Nature. This book was released on 2023-11-25 with total page 994 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Handbook is the ultimate definitive guide that covers key fundamentals and advanced applications for Additive Manufacturing. The Handbook has been structured into seven sections, comprising of a thorough Introduction to Additive Manufacturing; Design and Data; Processes; Materials; Post-processing, Testing and Inspection; Education and Training; and Applications and Case Study Examples. The general principles and functional relationships are described in each chapter and supplemented with industry use cases. The aim of this book is to help designers, engineers and manufacturers understand the state-of-the-art developments in the field of Additive Manufacturing. Although this book is primarily aimed at students and educators, it will appeal to researchers and industrial professionals working with technology users, machine or component manufacturers to help them make better decisions in the implementation of Additive Manufacturing and its applications.
Download or read book Fabricated written by Hod Lipson and published by John Wiley & Sons. This book was released on 2013-01-22 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fabricated tells the story of 3D printers, humble manufacturing machines that are bursting out of the factory and into schools, kitchens, hospitals, even onto the fashion catwalk. Fabricated describes our emerging world of printable products, where people design and 3D print their own creations as easily as they edit an online document. A 3D printer transforms digital information into a physical object by carrying out instructions from an electronic design file, or 'blueprint.' Guided by a design file, a 3D printer lays down layer after layer of a raw material to 'print' out an object. That's not the whole story, however. The magic happens when you plug a 3D printer into today’s mind-boggling digital technologies. Add to that the Internet, tiny, low cost electronic circuitry, radical advances in materials science and biotech and voila! The result is an explosion of technological and social innovation. Fabricated takes the reader onto a rich and fulfilling journey that explores how 3D printing is poised to impact nearly every part of our lives. Aimed at people who enjoy books on business strategy, popular science and novel technology, Fabricated will provide readers with practical and imaginative insights to the question 'how will this technology change my life?' Based on hundreds of hours of research and dozens of interviews with experts from a broad range of industries, Fabricated offers readers an informative, engaging and fast-paced introduction to 3D printing now and in the future.
Download or read book Emerging Micro and Nanotechnologies for Medical and Pharmacological Applications written by Wei Tao and published by Frontiers Media SA. This book was released on 2021-03-29 with total page 295 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Additive Manufacturing Classification written by Sanjay Kumar and published by Springer Nature. This book was released on 2022-10-02 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive manufacturing classification is one of the biggest issues faced by AM community. The book provides a comprehensive classification of AM, which can be useful to anyone working in any area of manufacturing. As the classification depends on the interrelation of various AM processes, the book provides concise and critical information of those processes, which can be helpful to anyone looking for a concise book on AM. The book provides original information unavailable in research papers.
Download or read book 3D Printing written by Rupinder Singh and published by Walter de Gruyter GmbH & Co KG. This book was released on 2024-05-06 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book provides a detailed methodology for addressing the needs of material processing (polymer/ metals/ bio-gels etc.) and various engineering applications in the next 5-10 years. The book presents a detailed mechanical, morphological, thermal, and rheological characterization of selected materials and highilights the required environmental standards to be maintained.
Download or read book Quality Analysis of Additively Manufactured Metals written by Javad Kadkhodapour and published by Elsevier. This book was released on 2022-11-30 with total page 858 pages. Available in PDF, EPUB and Kindle. Book excerpt: Quality Analysis of Additively Manufactured Metals: Simulation Approaches, Processes, and Microstructure Properties provides readers with a firm understanding of the failure and fatigue processes of additively manufactured metals. With a focus on computational methods, the book analyzes the process-microstructure-property relationship of these metals and how it affects their quality while also providing numerical, analytical, and experimental data for material design and investigation optimization. It outlines basic additive manufacturing processes for metals, strategies for modeling the microstructural features of metals and how these features differ based on the manufacturing process, and more.Improvement of additively manufactured metals through predictive simulation methods and microdamage and micro-failure in quasi-static and cyclic loading scenarios are covered, as are topology optimization methods and residual stress analysis techniques. The book concludes with a section featuring case studies looking at additively manufactured metals in automotive, biomedical and aerospace settings. Provides insights and outlines techniques for analyzing why additively manufactured metals fail and strategies for avoiding those failures Defines key terms and concepts related to the failure analysis, quality assurance and optimization processes of additively manufactured metals Includes simulation results, experimental data and case studies
Download or read book Fundamentals of the Shoulder written by Gazi Huri and published by Springer Nature. This book was released on 2022-04-22 with total page 285 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprehensively covers both basic and clinical aspects of the shoulder, from its anatomy and biomechanics, to the diagnosis and treatment of a broad range of shoulder disorders. Designed as a practical and richly illustrated reference guide, it provides the reader with the essentials needed to evaluate and treat shoulder injuries, including radiologic assessments, rehabilitative techniques and surgical procedures (both open and arthroscopic). It includes extensive coverage of the anatomy and pathology, while clinical topics covered include fractures around the shoulder joint, sport injuries and arthroplasty. Written by an international team of experts, who share tips, pearls and pitfalls, as well as best practices from their own experience, the book will be of interest to orthopedic surgeons, physical therapists, rehabilitation specialists and biomechanists alike.
Download or read book Handbook of Materials Structures Properties Processing and Performance written by Lawrence E. Murr and published by Springer. This book was released on 2021-01-14 with total page 1500 pages. Available in PDF, EPUB and Kindle. Book excerpt: This extensive knowledge base provides a coherent description of advanced topics in materials science and engineering with an interdisciplinary/multidisciplinary approach. The book incorporates a historical account of critical developments and the evolution of materials fundamentals, providing an important perspective for materials innovations, including advances in processing, selection, characterization, and service life prediction. It includes the perspectives of materials chemistry, materials physics, engineering design, and biological materials as these relate to crystals, crystal defects, and natural and biological materials hierarchies, from the atomic and molecular to the macroscopic, and emphasizing natural and man-made composites. This expansive presentation of topics explores interrelationships among properties, processing, and synthesis (historic and contemporary). The book serves as both an authoritative reference and roadmap of advanced materials concepts for practitioners, graduate-level students, and faculty coming from a range of disciplines.
Download or read book Multimaterial 3D Printing Technology written by Jiquan Yang and published by Academic Press. This book was released on 2021-01-21 with total page 233 pages. Available in PDF, EPUB and Kindle. Book excerpt: Multi-material 3D Printing Technology introduces the first models for complex construction and manufacturing using a multi-material 3D printer. The book also explains the advantages that these innovative models provide at various points of the manufacturing supply chain. Innovations in fields such as medicine and aerospace are seeing 3D printing applied to problems that require the technology to develop beyond its traditional definitions. This groundbreaking book provides broad coverage of the theory behind this emerging technology, and the technical details required for readers to investigate these methods for themselves. In addition to describing new models for application of this technology, this book also systematically summarizes the historical models, materials and relevant technologies that are important in multi-material 3D printing. Introduces the heterogeneous object model for 3D printing Provides case studies of the use of hybrid 3D Printing to create gears and human bone Presents techniques which are easy to realize using commercial 3D printers
Download or read book Advances in Additive Manufacturing Modeling Systems and 3D Prototyping written by Massimo Di Nicolantonio and published by Springer. This book was released on 2019-06-04 with total page 671 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the latest advances in digital modeling systems (DMSs) and additive manufacturing (AM) technologies. It covers applications of networked technologies, ubiquitous computing, new materials and hybrid production systems, discussing how they are changing the processes of conception, modeling and production of products and systems of product. The book emphasizes ergonomic and sustainability issues, as well as timely topics such as DMSs and AM in Industry 4.0, DMSs and AM in developing countries, DMSs and AM in extreme environments, thus highlighting future trends and promising scenarios for further developing those technologies. Based on the AHFE 2019 International Conference on Additive Manufacturing, Modeling Systems and 3D Prototyping, held on July 24-28, 2019, in Washington D.C., USA, the book is intended as source of inspiration for researchers, engineers and stakeholders, and to foster interdisciplinary and international collaborations between them.
Download or read book Polymer 3D Printing and 3D Copying Technology written by Weimin Yang and published by Springer Nature. This book was released on 2023-07-21 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on 3D printing and molding/ copying technologies and approaches, which innovatively proposes the concept of polymer 3D copying technology. It introduces the two technologies of polymer 3D printing and 3D copying by analogy and elaborates the core principles and processes of polymer 3D copying technology, the composition, basic parameters and structure design of polymer 3D copying machines, precision control methods, defect generation mechanism and solutions of polymer 3D copying products, and also discussed the future development of polymer 3D copying technology. The novel concept of 3D copying is one of the major features of the book, which is particularly suited for readers who are interested in rapid prototyping and molding. The book is based on both traditional and new knowledges, with novel content and concept, focusing on both principles and engineering practice. It systematically reflects the content and application of polymer 3D printing and 3D copying technology, which can benefit researchers, engineers, and students of related majors engaged in the fields of polymer processing, rapid prototyping, 3D printing and molding/ copying, etc.
Download or read book 3D Printed Microfluidic Devices written by Savas Tasoglu and published by MDPI. This book was released on 2019-01-10 with total page 213 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue "3D Printed Microfluidic Devices" that was published in Micromachines
Download or read book Additive Manufacturing Technologies written by Ian Gibson and published by Springer. This book was released on 2014-11-26 with total page 498 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers in detail the various aspects of joining materials to form parts. A conceptual overview of rapid prototyping and layered manufacturing is given, beginning with the fundamentals so that readers can get up to speed quickly. Unusual and emerging applications such as micro-scale manufacturing, medical applications, aerospace, and rapid manufacturing are also discussed. This book provides a comprehensive overview of rapid prototyping technologies as well as support technologies such as software systems, vacuum casting, investment casting, plating, infiltration and other systems. This book also: Reflects recent developments and trends and adheres to the ASTM, SI, and other standards Includes chapters on automotive technology, aerospace technology and low-cost AM technologies Provides a broad range of technical questions to ensure comprehensive understanding of the concepts covered
Download or read book 3D Printing of Metals written by Manoj Gupta and published by MDPI. This book was released on 2019-08-13 with total page 138 pages. Available in PDF, EPUB and Kindle. Book excerpt: 3D printing is rapidly emerging as a key manufacturing technique that is capable of serving a wide spectrum of applications, ranging from engineering to biomedical sectors. Its ability to form both simple and intricate shapes through computer-controlled graphics enables it to create a niche in the manufacturing sector. Key challenges remain, and a great deal of research is required to develop 3D printing technology for all classes of materials including polymers, metals, ceramics, and composites. In view of the growing importance of 3D manufacturing worldwide, this Special Issue aims to seek original articles to further assist in the development of this promising technology from both scientific and technological perspectives. Targeted reviews, including mini-reviews, are also welcome, as they play a crucial role in educating students and young researchers.
Download or read book Nanomaterials for 2D and 3D Printing written by Shlomo Magdassi and published by John Wiley & Sons. This book was released on 2017-06-06 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first book to paint a complete picture of the challenges of processing functional nanomaterials for printed electronics devices, and additive manufacturing fabrication processes. Following an introduction to printed electronics, the book focuses on various functional nanomaterials available, including conducting, semi-conducting, dielectric, polymeric, ceramic and tailored nanomaterials. Subsequent sections cover the preparation and characterization of such materials along with their formulation and preparation as inkjet inks, as well as a selection of applications. These include printed interconnects, passive and active modules, as well as such high-tech devices as solar cells, transparent electrodes, displays, touch screens, sensors, RFID tags and 3D objects. The book concludes with a look at the future for printed nanomaterials. For all those working in the field of printed electronics, from entrants to specialized researchers, in a number of disciplines ranging from chemistry and materials science to engineering and manufacturing, in both academia and industry.
