Download or read book Unit Manufacturing Processes written by National Research Council and published by National Academies Press. This book was released on 1995-01-03 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing, reduced to its simplest form, involves the sequencing of product forms through a number of different processes. Each individual step, known as an unit manufacturing process, can be viewed as the fundamental building block of a nation's manufacturing capability. A committee of the National Research Council has prepared a report to help define national priorities for research in unit processes. It contains an organizing framework for unit process families, criteria for determining the criticality of a process or manufacturing technology, examples of research opportunities, and a prioritized list of enabling technologies that can lead to the manufacture of products of superior quality at competitive costs. The study was performed under the sponsorship of the National Science Foundation and the Defense Department's Manufacturing Technology Program.

Download or read book Metal Deformation Processing written by F. W. Boulger and published by . This book was released on 1967 with total page 174 pages. Available in PDF, EPUB and Kindle. Book excerpt: As part of the Metalworking Processes and Equipment Program, information was collected on deformation characteristics of metals and their effect on processing operations. The report presents the information collected from technical engineering reports on Government contracts and from general engineering and metallurgical publications. The objective is to help the nonspecialist in recognizing the implications of scientific findings and in applying them in specific operations. This report contains a series of articles covering the following subjects: Ductile Fracture; Application of High Pressure to the Forming of Brittle Metals; Superplasticity; Lubrication in Metal-Deformation Processes; Swaging; Adiabatic Conditions in Deformation Processing; Residual Stresses produced by Deformation. These subjects are treated in two ways: (1) generalized discussions of common processes point out why specific variables must be modified in order to deform certain types of metals satisfactorily; and (2) data on the more difficult-to-form metals are used to illustrate the principles, limitations, and effects of the processes. (Author).

Download or read book Deformation Processing written by Walter A. Backofen and published by . This book was released on 1972 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Metal Deformation Processing written by F. W. Boulger and published by . This book was released on 1964 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt: As part of the Metalworking Process and Equipment Program, a survey was conducted to collect and summarize information on deformation characteristics of metals and their effect on processing operations. This report presents information obtained from reports on Governmentsponsored work and from articles in technical publications. The report covers eight subjects: extrusion, forging, rolling, thermal mechanical variables affecting the properties of refractory metals and alloys, development of preferred orientations, anisotropy of strength and ductility, high-strain-rate deformation, and strain aging. In order to be useful to engineering students and production engineers the topics are treated in two ways. Generalized discussions of common processes point out why specific variables must be modified in order to deform certain types of metals satisfactorily. When practical, data on the more-difficultto-form metals are used to illustrate the principles, limitations, and effects of the processes. The objective is to help the non-specialist recognize the implications of specific findings and to apply them to specific operations. (Author).

Download or read book Metal Shaping Processes written by Vukota Boljanovic and published by Industrial Press Inc.. This book was released on 2010 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the only comprehensive text focusing on metal shaping processes, which are still the most widely used processes in the manufacture of products and structures, Metal Shaping Processes carefully presents the fundamentals of metal shaping processes with their relevant applications. The treatment of the subject matter is adequately descriptive for those unfamiliar with the various processes and yet is sufficiently analytical for an introductory academic course in manufacturing. The text, as well as the numerous formulas and illustrations in each chapter, clearly show that shaping processes, as a part of manufacturing engineering, are a complex and interdisciplinary subject. The topics are organized and presented in such a manner that they motivate and challenge students to present technically and economically viable solutions to a wide variety of questions and problems, including product design. It is the perfect textbook for students in mechanical, industrial, and manufacturing engineering programs at both the Associate Degree and Bachelor Degree programs, as well a valuable reference for manufacturing engineers (those who design, execute and maintain the equipment and tools); process engineers (those who plan and engineer the manufacturing steps, equipment, and tooling needed in production); manufacturing managers and supervisors; product design engineers; and maintenance and reliability managers and technicians. Each chapter begins with a brief highlighted outline of the topics to be described. Carefully presents the fundamentals of the particular metal-shaping process with its relevant applications within each chapter, so that the student and teacher can clearly assess the capabilities, limitation, and potentials of the process and its competitive aspects. Features sections on product design considerations, which present guidelines on design for manufacturing in many of the chapters. Offers practical, understandable explanations, even for complex processes. Includes text entries that are coded as in an outline, with these numerical designations carried over the 320 related illustrations for easy cross-referencing. Provides a dual (ISO and USA) unit system. Contains end-of-chapter Review Questions. Includes a chapter on sheet metalworking covering cutting processes; bending process; tubes and pipe bending; deep drawing processes; other sheet metal forming process (stretch forming, spinning, rubber forming, and superplatic forming and diffusion bonding). Provides a useful die classification with 15 illustrations and description; presses for sheet metalworking; and high energy-rate forming processes. A chapter on nontraditional manufacturing process discusses such important processes as mechanical energy processes (ultrasonic machining, water jet cutting); electrochemical machining processes (electrochemical machining, electrochemical grinding); thermal energy processes (electric discharge processes, laser beam machining, electron beam machining); and chemical processes (chemical milling).

Download or read book The Deformation and Processing of Structural Materials written by Z. X. Guo and published by Elsevier. This book was released on 2005-05-25 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: Having a good understanding of a construction material’s performance under different conditions is essential for helping engineers in selecting the right type of material for a job and for setting design specifications. Keeping abreast of the latest research is an important part of this. The deformation and processing of structural materials is divided into eight chapters, each one exploring a material’s processing and deformation behaviour. They also consider how the microstructural composition of materials is affected by processing and what influence this has on its subsequent in situ performance. The materials and behaviours looked at in the chapters include: aluminium and its alloys; magnesium alloys; ferrous alloys; superalloys (Ni-based alloys); semisolid metal (SSM) processing of metallic alloys; plastic deformation of intermetallic alloys; metal matrix composites (MMCs); and fine grain superplasticity in SP materials. The first of its kind to give comprehensive coverage to the subject, The deformation and processing of structural materials is a valuable resource for engineers, researchers in mechanical, civil and structural engineering. Contains research on the preformance of materials Valuable resource for researchers in mechanical, civil and structural engineering Comprehensive coverage to the deformation and processing of all types of structural materials

Download or read book Metal Deformation Processing Volume I a Survey Conducted as Part of the Metalworking Process and Equipment Program mpep written by F. W. BOULGER and published by . This book was released on 1964 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt: As part of the Metalworking Process and Equipment Program, a survey was conducted to collect and summarize information on deformation characteristics of metals and their effect on processing operations. This report presents information obtained from reports on Governmentsponsored work and from articles in technical publications. The report covers eight subjects: extrusion, forging, rolling, thermal mechanical variables affecting the properties of refractory metals and alloys, development of preferred orientations, anisotropy of strength and ductility, high-strain-rate deformation, and strain aging. In order to be useful to engineering students and production engineers the topics are treated in two ways. Generalized discussions of common processes point out why specific variables must be modified in order to deform certain types of metals satisfactorily. When practical, data on the more-difficultto-form metals are used to illustrate the principles, limitations, and effects of the processes. The objective is to help the non-specialist recognize the implications of specific findings and to apply them to specific operations. (Author).

Download or read book Principles of Metal Manufacturing Processes written by J. Beddoes and published by Butterworth-Heinemann. This book was released on 1999-05-28 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metals are still the most widely used structural materials in the manufacture of products and structures. Their properties are extremely dependent on the processes they undergo to form the final product. Successful manufacturing therefore depends on a detailed knowledge of the processing of the materials involved. This highly illustrated book provides that knowledge.Metal processing is a technical subject requiring a quantitative approach. This book illustrates this approach with real case studies derived from industry. Real industrial case studies Quantitative approach Challenging student problems

Download or read book The Application of High Pressure in Metal deformation Processing written by F. W. Boulger and published by . This book was released on 1964 with total page 82 pages. Available in PDF, EPUB and Kindle. Book excerpt: On October 3, 1963, a symposium was sponsored by the Bureau of Naval Weapons, Metalworking Processes and Equipment Program, on the application of high pressure in metal-deformation processing. Past research has shown that superimposed hydrostatic pressure can significantly increase the ductility at fracture of various materials. These observations have stimulated considerable interest in applying this hydrostatic-pressure effect to metal deformation processing, where it was anticipated that improved ductility and fabricability of brittle materials could be realized. Hydrostatic extrusion and hydrodynamic compressive forging were two such fabrication techniques discussed at the symposium, and preliminary results were found to be encouraging. Another fabrication process that will be investigated in the near future is sheet drawing, where the effect of superimposed pressure improves the ductility to fracture, it was noted that pressure cycling did not improve either the strength or ductility of steels containing various amounts of carbon. In addition to the mechanical-property effects, hydrostatic pressure has been found to affect measurably, numerous metallurgical properties of metals and alloys. (Author).

Download or read book Advances in Deformation Processing written by John J. Burke and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Army Materials and Mechanics Research Center has con ducted the Sagamore Army Materials Research Conference in coop eration with the Materials Science Group of the Department of Chemical Engineering and Materials Science of Syracuse University since 1954. The purpose of the conference has been to gather to gether scientists and engineers from academic institutions, in dustry and government who are uniquely qualified to explore in depth a subject of importance to the Army, the Department of Defense and the scientific community. This volume, Advances in Deformation Processing, addresses the areas of Analytical Advances, Workability, Processing to Optimize Properties, Advanced Applications - Materials, and Advanced Applications - Processes. The dedicated assistance of Mr. Joseph Bernier of the Army Materials and Mechanics Research Center throughout the stages of the conference planning and finally the publication of the Sagamore Conference Proceedings is deeply appreciated. The support of Helen Brown DeMascio of Syracuse University in p- paring the final manuscript is acknowledged. The continued active interest and support of these conferences by Dr. A. E. Gorum, Director of the Army Materials and Mechanics Research Center, is appreciated. Syracuse University Syracuse, New York The Editors vii Contents SESSION I INTRODUCTION A. E. Gorum, Moderator Continuum Mechanics and Deformation Processing 1.

Download or read book Microstructure Evolution in Metal Forming Processes written by J Lin and published by Elsevier. This book was released on 2012-07-09 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: Monitoring and control of microstructure evolution in metal processing is essential in developing the right properties in a metal. Microstructure evolution in metal forming processes summarises the wealth of recent research on the mechanisms, modelling and control of microstructure evolution during metal forming processes. Part one reviews the general principles involved in understanding and controlling microstructure evolution in metal forming. Techniques for modelling microstructure and optimising processes are explored, along with recrystallisation, grain growth, and severe plastic deformation. Microstructure evolution in the processing of steel is the focus of part two, which reviews the modelling of phase transformations in steel, unified constitutive equations and work hardening in microalloyed steels. Part three examines microstructure evolution in the processing of other metals, including ageing behaviour in the processing of aluminium and microstructure control in processing nickel, titanium and other special alloys. With its distinguished editors and international team of expert contributors, Microstructure evolution in metal forming processes is an invaluable reference tool for metal processors and those using steels and other metals, as well as an essential guide for academics and students involved in fundamental metal research. Summarises the wealth of recent research on the mechanisms, modelling and control of microstructure evolution during metal forming processes Comprehensively discusses microstructure evolution in the processing of steel and reviews the modelling of phase transformations in steel, unified constitutive equations and work hardening in microalloyed steels Examines microstructure evolution in the processing of other materials, including ageing behaviour in the processing of aluminium

Download or read book Additive Friction Stir Deposition written by Hang Z. Yu and published by Elsevier. This book was released on 2022-07-19 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive Friction Stir Deposition is a comprehensive summary of the state-of-the-art understanding on this emerging solid-state additive manufacturing technology. Sections cover additive friction stir deposition, encompassing advances in processing science, metallurgical science and innovative applications. The book presents a clear description of underlying physical phenomena, shows how the process determines the printing quality, covers resultant microstructure and properties in the as-printed state, highlights its key capabilities and limitations, and explores niche applications in repair, cladding and multi-material 3D printing. Serving as an educational and research guide, this book aims to provide a holistic picture of additive friction stir deposition-based solid-state additive manufacturing as well as a thorough comparison to conventional beam-based metal additive manufacturing, such as powder bed fusion and directed energy deposition. Provides a clear process description of additive friction stir deposition and highlights key capabilities Summarizes the current research and application of additive friction stir deposition, including material flow, microstructure evolution, repair and dissimilar material cladding Discusses future applications and areas of research for this technology

Download or read book Fundamentals of Deformation Processing written by and published by . This book was released on 1964 with total page 446 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Hot Deformation and Processing of Aluminum Alloys written by Hugh J. McQueen and published by CRC Press. This book was released on 2016-04-19 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive treatise on the hot working of aluminum and its alloys, Hot Deformation and Processing of Aluminum Alloys details the possible microstructural developments that can occur with hot deformation of various alloys, as well as the kind of mechanical properties that can be anticipated. The authors take great care to explain and differenti

Download or read book Metal Deformation Processing Volume Iii a Survey Conducted as Part of the Metalworking Process and Equipment Program mpep written by F. W. Boulger and published by . This book was released on 1967 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: As part of the Metalworking Processes and Equipment Program, information was collected on deformation characteristics of metals and their effect on processing operations. The report presents the information collected from technical engineering reports on Government contracts and from general engineering and metallurgical publications. The objective is to help the nonspecialist in recognizing the implications of scientific findings and in applying them in specific operations. This report contains a series of articles covering the following subjects: Ductile Fracture; Application of High Pressure to the Forming of Brittle Metals; Superplasticity; Lubrication in Metal-Deformation Processes; Swaging; Adiabatic Conditions in Deformation Processing; Residual Stresses produced by Deformation. These subjects are treated in two ways: (1) generalized discussions of common processes point out why specific variables must be modified in order to deform certain types of metals satisfactorily; and (2) data on the more difficult-to-form metals are used to illustrate the principles, limitations, and effects of the processes. (Author).

Download or read book Metal Deformation Processing Volume Ii a Survey Conducted as Part of the Metalworking Processes and Equipment Program mpep written by F. W. Boulger and published by . This book was released on 1966 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt: As part of the Metalworking Processes and Equipment Program, information was collected on deformation characteristics of metals and their effect on processing operations. This report presents the information collected from technical engineering reports on Government contracts and from general engineering and metallurgical publications. The objective is to help the nonspecialist in recognizing the implications of scientific findings and in applying them in specific operations. This report contains a series of articles covering the following subjects: Theory of Plasticity; High-Velocity Forming; Work-Hardening Mechanisms in Metals; Shear Forming and Spinning of Metals; Friction and Wear in Metal-Deformation Processed; Rod, Wire, and Tube Drawing; and Applications of Static High Pressure to the Forming of Metals-Hydrostatic Extrusion. These subjects are treated in two ways: (1) generalized discussions of common processes point out why specific variables must be modified in order to deform certain types of metals satisfactorily; and (2) data on the more difficult-to-form metals are used to illustrate the principles, limitations, and effects of the processes. (Author).

Download or read book Severe Plastic Deformation written by Ghader Faraji and published by Elsevier. This book was released on 2018-07-14 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: Severe Plastic Deformation: Methods, Processing and Properties examines all severe plastic deformation techniques developed over the past two decades, exploring the appropriate severe plastic deformation method for a particular case. The book offers an overview of these methods, introduces ultrafine-grained and nano-grained metals and methods for various bulk, sheet, tubular and large size samples, reviews effective parameters to make a severe plastic deformation method better, from property (mechanical) and processing (cost, time, load, etc.) viewpoints, discusses mechanical, physical and chemical properties of UFG and NS metals, and concludes with various applications for these methods. Over the last several decades, a large number of severe plastic deformation methods have been developed for processing a wide array of metals for superior properties, making this a timely resource. Collects all severe plastic deformation methods in a unique reference Compares severe plastic deformation methods from several viewpoints, including processing and final property Classifies severe plastic deformation methods based on the sample shape and mechanics, as well as the properties achieved in the processed metal Introduces ultrafine-grained and nano-grained metals and methods for various bulk, sheet, tubular and large size samples