Download or read book Mercury Cadmium Telluride written by Peter Capper and published by Wiley. This book was released on 2010-11-03 with total page 590 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mercury cadmium telluride (MCT) is the third most well-regarded semiconductor after silicon and gallium arsenide and is the material of choice for use in infrared sensing and imaging. The reason for this is that MCT can be ‘tuned’ to the desired IR wavelength by varying the cadmium concentration. Mercury Cadmium Telluride: Growth, Properties and Applications provides both an introduction for newcomers, and a comprehensive review of this fascinating material. Part One discusses the history and current status of both bulk and epitaxial growth techniques, Part Two is concerned with the wide range of properties of MCT, and Part Three covers the various device types that have been developed using MCT. Each chapter opens with some historical background and theory before presenting current research. Coverage includes: Bulk growth and properties of MCT and CdZnTe for MCT epitaxial growth Liquid phase epitaxy (LPE) growth Metal-organic vapour phase epitaxy (MOVPE) Molecular beam epitaxy (MBE) Alternative substrates Mechanical, thermal and optical properties of MCT Defects, diffusion, doping and annealing Dry device processing Photoconductive and photovoltaic detectors Avalanche photodiode detectors Room-temperature IR detectors
Download or read book Metalorganic Vapor Phase Epitaxy MOVPE written by Stuart Irvine and published by John Wiley & Sons. This book was released on 2019-10-07 with total page 582 pages. Available in PDF, EPUB and Kindle. Book excerpt: Systematically discusses the growth method, material properties, and applications for key semiconductor materials MOVPE is a chemical vapor deposition technique that produces single or polycrystalline thin films. As one of the key epitaxial growth technologies, it produces layers that form the basis of many optoelectronic components including mobile phone components (GaAs), semiconductor lasers and LEDs (III-Vs, nitrides), optical communications (oxides), infrared detectors, photovoltaics (II-IV materials), etc. Featuring contributions by an international group of academics and industrialists, this book looks at the fundamentals of MOVPE and the key areas of equipment/safety, precursor chemicals, and growth monitoring. It covers the most important materials from III-V and II-VI compounds to quantum dots and nanowires, including sulfides and selenides and oxides/ceramics. Sections in every chapter of Metalorganic Vapor Phase Epitaxy (MOVPE): Growth, Materials Properties and Applications cover the growth of the particular materials system, the properties of the resultant material, and its applications. The book offers information on arsenides, phosphides, and antimonides; nitrides; lattice-mismatched growth; CdTe, MCT (mercury cadmium telluride); ZnO and related materials; equipment and safety; and more. It also offers a chapter that looks at the future of the technique. Covers, in order, the growth method, material properties, and applications for each material Includes chapters on the fundamentals of MOVPE and the key areas of equipment/safety, precursor chemicals, and growth monitoring Looks at important materials such as III-V and II-VI compounds, quantum dots, and nanowires Provides topical and wide-ranging coverage from well-known authors in the field Part of the Materials for Electronic and Optoelectronic Applications series Metalorganic Vapor Phase Epitaxy (MOVPE): Growth, Materials Properties and Applications is an excellent book for graduate students, researchers in academia and industry, as well as specialist courses at undergraduate/postgraduate level in the area of epitaxial growth (MOVPE/ MOCVD/ MBE).
Download or read book Optical Constants of Crystalline and Amorphous Semiconductors written by Sadao Adachi and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 725 pages. Available in PDF, EPUB and Kindle. Book excerpt: Knowledge of the refractive indices and absorption coefficients of semiconductors is especially import in the design and analysis of optical and optoelectronic devices. The determination of the optical constants of semiconductors at energies beyond the fundamental absorption edge is also known to be a powerful way of studying the electronic energy-band structures of the semiconductors. The purpose of this book is to give tabulated values and graphical information on the optical constants of the most popular semiconductors over the entire spectral range. This book presents data on the optical constants of crystalline and amorphous semiconductors. A complete set of the optical constants are presented in this book. They are: the complex dielectric constant (E=e.+ieJ, complex refractive index (n*=n+ik), absorption coefficient (a.), and normal-incidence reflectivity (R). The semiconductor materials considered in this book are the group-IV elemental and binary, llI-V, IT-VI, IV-VI binary semiconductors, and their alloys. The reader will fmd the companion book "Optical Properties of Crystalline and Amorphous Semiconductors: Materials and Fundamental Principles" useful since it emphasizes the basic material properties and fundamental prinCiples.
Download or read book Mercury Cadmium Telluride Imagers written by Anders C. Onshage and published by . This book was released on 1997 with total page 439 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mercury Cadmium Telluride as a 1 to 20 micro meter Wavelength Infrared Detector for Space Applications written by Richard D. Packard and published by . This book was released on 1968 with total page 26 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Properties of Narrow Gap Cadmium based Compounds written by Peter Capper and published by IET. This book was released on 1994 with total page 648 pages. Available in PDF, EPUB and Kindle. Book excerpt: This highly structured volume contains sections on growth and device aspects of mercury cadmium telluride (MCT).
Download or read book Mercury Cadmium Telluride written by Peter Capper and published by John Wiley & Sons. This book was released on 2011-06-20 with total page 610 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mercury cadmium telluride (MCT) is the third most well-regarded semiconductor after silicon and gallium arsenide and is the material of choice for use in infrared sensing and imaging. The reason for this is that MCT can be ‘tuned’ to the desired IR wavelength by varying the cadmium concentration. Mercury Cadmium Telluride: Growth, Properties and Applications provides both an introduction for newcomers, and a comprehensive review of this fascinating material. Part One discusses the history and current status of both bulk and epitaxial growth techniques, Part Two is concerned with the wide range of properties of MCT, and Part Three covers the various device types that have been developed using MCT. Each chapter opens with some historical background and theory before presenting current research. Coverage includes: Bulk growth and properties of MCT and CdZnTe for MCT epitaxial growth Liquid phase epitaxy (LPE) growth Metal-organic vapour phase epitaxy (MOVPE) Molecular beam epitaxy (MBE) Alternative substrates Mechanical, thermal and optical properties of MCT Defects, diffusion, doping and annealing Dry device processing Photoconductive and photovoltaic detectors Avalanche photodiode detectors Room-temperature IR detectors
Download or read book Infrared Detectors written by Antonio Rogalski and published by CRC Press. This book was released on 2010-11-15 with total page 900 pages. Available in PDF, EPUB and Kindle. Book excerpt: Completely revised and reorganized while retaining the approachable style of the first edition, Infrared Detectors, Second Edition addresses the latest developments in the science and technology of infrared (IR) detection. Antoni Rogalski, an internationally recognized pioneer in the field, covers the comprehensive range of subjects necessary to un
Download or read book Expanding the Vision of Sensor Materials written by Committee on New Sensor Technologies: Materials and Applications and published by National Academies Press. This book was released on 1995-07-06 with total page 146 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in materials science and engineering have paved the way for the development of new and more capable sensors. Drawing upon case studies from manufacturing and structural monitoring and involving chemical and long wave-length infrared sensors, this book suggests an approach that frames the relevant technical issues in such a way as to expedite the consideration of new and novel sensor materials. It enables a multidisciplinary approach for identifying opportunities and making realistic assessments of technical risk and could be used to guide relevant research and development in sensor technologies.
Download or read book Fundamentals of Infrared Detector Materials written by Michael A. Kinch and published by SPIE Press. This book was released on 2007 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: The choice of available infrared (IR) detectors for insertion into modern IR systems is both large and confusing. The purpose of this volume is to provide a technical database from which rational IR detector selection criteria evolve, and thus clarify the options open to the modern IR system designer. Emphasis concentrates mainly on high-performance IR systems operating in a tactical environment, although there also is discussion of both strategic environments and low- to medium-performance system requirements.
Download or read book CdTe and Related Compounds Physics Defects Hetero and Nano structures Crystal Growth Surfaces and Applications written by and published by Elsevier. This book was released on 2009-11-11 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: Almost thirty years after the remarkable monograph of K. Zanio and the numerous conferences and articles dedicated since that time to CdTe and CdZnTe, after all the significant progresses in that field and the increasing interest in these materials for several extremely attractive industrial applications, such as nuclear detectors and solar cells, the edition of a new enriched and updated monograph dedicated to these two very topical II-VI semiconductor compounds, covering all their most prominent, modern and fundamental aspects, seemed very relevant and useful. - Detailed coverage of the main topics associated with the very topical II-VI semiconductor compound CdTe and its alloy CZT - Review of the CdTe recent developments - Fundamental background of many topics clearly introduced and exposed
Download or read book Crystal Growth Technology written by Hans J. Scheel and published by John Wiley & Sons. This book was released on 2009-07-31 with total page 695 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume deals with the technologies of crystal fabrication, of crystal machining, and of epilayer production and is the first book on industrial and scientific aspects of crystal and layer production. The major industrial crystals are treated: Si, GaAs, GaP, InP, CdTe, sapphire, oxide and halide scintillator crystals, crystals for optical, piezoelectric and microwave applications and more. Contains 29 contributions from leading crystal technologists covering the following topics: * General aspects of crystal growth technology * Silicon * Compound semiconductors * Oxides and halides * Crystal machining * Epitaxy and layer deposition Scientific and technological problems of production and machining of industrial crystals are discussed by top experts, most of them from the major growth industries and crystal growth centers. In addition, it will be useful for the users of crystals, for teachers and graduate students in materials sciences, in electronic and other functional materials, chemical and metallurgical engineering, micro-and optoelectronics including nanotechnology, mechanical engineering and precision-machining, microtechnology, and in solid-state sciences.
Download or read book Liquid Phase Epitaxy of Electronic Optical and Optoelectronic Materials written by Peter Capper and published by John Wiley & Sons. This book was released on 2007-08-20 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: Liquid-Phase Epitaxy (LPE) is a technique used in the bulk growth of crystals, typically in semiconductor manufacturing, whereby the crystal is grown from a rich solution of the semiconductor onto a substrate in layers, each of which is formed by supersaturation or cooling. At least 50% of growth in the optoelectronics area is currently focussed on LPE. This book covers the bulk growth of semiconductors, i.e. silicon, gallium arsenide, cadmium mercury telluride, indium phosphide, indium antimonide, gallium nitride, cadmium zinc telluride, a range of wide-bandgap II-VI compounds, diamond and silicon carbide, and a wide range of oxides/fluorides (including sapphire and quartz) that are used in many industrial applications. A separate chapter is devoted to the fascinating field of growth in various forms of microgravity, an activity that is approximately 30-years old and which has revealed many interesting features, some of which have been very surprising to experimenters and theoreticians alike. Covers the most important materials within the field The contributors come from a wide variety of countries and include both academics and industrialists, to give a balanced treatment Builds-on an established series known in the community Highly pertinent to current and future developments in telecommunications and computer-processing industries.
Download or read book Extractive Metallurgy of Copper written by A.K. Biswas and published by Elsevier. This book was released on 2013-10-22 with total page 519 pages. Available in PDF, EPUB and Kindle. Book excerpt: A completely revised and up-to-date edition containing comprehensive industrial data. The many significant changes which occurred during the 1980s and 1990s are chronicled. Modern high intensity smelting processes are presented in detail, specifically flash, Contop, Isasmelt, Noranda, Teniente and direct-to-blister smelting. Considerable attention is paid to the control of SO2 emissions and manufacture of H2SO4. Recent developments in electrorefining, particularly stainless steel cathode technology are examined. Leaching, solvent extraction and electrowinning are evaluated together with their impact upon optimizing mineral resource utilization. The volume targets the recycling of copper and copper alloy scrap as an increasingly important source of copper and copper alloys. Copper quality control is also discussed and the book incorporates an important section on extraction economics.Each chapter is followed by a summary of concepts previously described and offers suggested further reading and references.
Download or read book Cadmium Telluride Quantum Dots written by John Donegan and published by CRC Press. This book was released on 2013-12-03 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the last two decades, semiconductor quantum dots—small colloidal nanoparticles—have garnered a great deal of scientific interest because of their unique properties. Among nanomaterials, CdTe holds special technological importance as the only known II–VI material that can form conventional p–n junctions. This makes CdTe very important for the development of novel optoelectronic devices such as light-emitting diodes, solar cells, and lasers. Moreover, the demand for water-compatible light emitters and the most common biological buffers give CdTe quantum dots fields a veritable edge in biolabeling and bioimaging. Cadmium Telluride Quantum Dots: Advances and Applications focuses on CdTe quantum dots and addresses their synthesis, assembly, optical properties, and applications in biology and medicine. It makes for a very informative reading for anyone involved in nanotechnology and will also benefit those scientists who are looking for a comprehensive account on the current state of quantum dot–related research.
Download or read book Mercury Cadmium Telluride Imagers written by A.C. Onshage and published by Elsevier. This book was released on 1997-06-18 with total page 457 pages. Available in PDF, EPUB and Kindle. Book excerpt: In two parts, this book describes the evolution of mercury cadmium telluride (HgCdTe) imager structures based upon published patents and patent applications. The first part covers monolithic arrays, and the second part describes hybrid arrays. Each part has 5 chapters, with each document placed in chronological order, with the documents with the earliest priority placed first. Focus has been directed at the steps of manufacturing and structures of imagers.There is an index at the end of the book containing the patent number, the name of the applicant and the date of publication of each cited document.This monograph will serve as a useful summary of the patents and patent applications in the field of mercury cadmium telluride imagers.
Download or read book Infrared Detectors and Emitters Materials and Devices written by Peter Capper and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: An up-to-date view of the various detector/emitter materials systems currently in use or being actively researched. The book is aimed at newcomers and those already working in the IR industry. It provides both an introductory text and a valuable overview of the entire field.
