Download or read book MEMS Cost Analysis written by Ron Lawes and published by CRC Press. This book was released on 2016-04-19 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume demonstrates show cost analysis can be adapted to MEMS, taking into account the wide range of processes and equipment, the major differences with the established semiconductor industry, and the presence of both large-scale, product-orientated manufacturers and small- and medium-scale foundries. The content examines the processes and equ

Download or read book MEMS written by Jan Korvink and published by William Andrew. This book was released on 2005-11-17 with total page 993 pages. Available in PDF, EPUB and Kindle. Book excerpt: Does MEMS technology offer advantages to your company's products? Will miniature machines on a chip solve your application objectives for ôsmaller, better, cheaper, and faster'ö If you are a product development engineer or manager, the decision to design a MEMS device implies having an application and market. This book offers you a practical guide to making this important business decision. Here, both veterans and newcomers to MEMS device design will get advice on evaluating MEMS for their business, followed by guidance on selecting solutions, technologies and design support tools. You will see how experts from around the world have explored MEMS possibilities and achieved new breakthrough devices such as RF-MEMS for mobile telecommunications, micro-optics for internet hardware, catheter-based minimal-invasive operating theatre tools, and in vivo monitoring of exact dosage of medication in ailing patients. This handbook offers a wealth of analytical techniques treating problematic areas such as alternative designs reliability, packaging, and cost effectiveness.

Download or read book MEMS Product Development written by Alissa M. Fitzgerald and published by Springer Nature. This book was released on 2021-03-16 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: Drawing on their experiences in successfully executing hundreds of MEMS development projects, the authors present the first practical guide to navigating the technical and business challenges of MEMS product development, from the initial concept stage all the way to commercialization. The strategies and tactics presented, when practiced diligently, can shorten development timelines, help avoid common pitfalls, and improve the odds of success, especially when resources are limited. MEMS Product Development illuminates what it really takes to develop a novel MEMS product so that innovators, designers, entrepreneurs, product managers, investors, and executives may properly prepare their companies to succeed.

Download or read book MEMS written by Jan Korvink and published by William Andrew. This book was released on 2007-01-14 with total page 990 pages. Available in PDF, EPUB and Kindle. Book excerpt: Does MEMS technology offer advantages to your company's products? Will miniature machines on a chip solve your application objectives for ôsmaller, better, cheaper, and faster'ö If you are a product development engineer or manager, the decision to design a MEMS device implies having an application and market. This book offers you a practical guide to making this important business decision. Here, both veterans and newcomers to MEMS device design will get advice on evaluating MEMS for their business, followed by guidance on selecting solutions, technologies and design support tools. You will see how experts from around the world have explored MEMS possibilities and achieved new breakthrough devices such as RF-MEMS for mobile telecommunications, micro-optics for internet hardware, catheter-based minimal-invasive operating theatre tools, and in vivo monitoring of exact dosage of medication in ailing patients. This handbook offers a wealth of analytical techniques treating problematic areas such as alternative designs reliability, packaging, and cost effectiveness.

Download or read book Practical MEMS written by Ville Kaajakari and published by . This book was released on 2009 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt: Practical MEMS focuses on analyzing the operational principles of microsystems. The salient features of the book include: Tutorial approach. The book emphasizes the design and analysis through over 100 calculated examples covering all aspects of MEMS design. Emphasis on design. This book focuses on the microdevice operation. First, the physical operation principles are covered. Second, the design equations are derived and exemplified. Practical MEMS is a perfect companion to MEMS fabrication textbooks. Quantitative performance analysis. The critical performance parameters for the given application are identified and analyzed. For example, the noise and power performance of piezoresistive and capacitive accelerometers is analyzed in detail. Mechanical, resistive (thermal and 1/f-noise), and circuit noise analysis is covered. Application specifications. Different MEMS applications are compared to commercial design requirements. For example, the optical MEMS is analyzed in the context of bar code scanner, projection displays, and optical cross connect specifications. MEMS economics and market analysis. A full chapter is devoted to yield and cost analysis of microfabricated devices. In addition, the market economics for emerging applications such as RF MEMS is discussed.

Download or read book MEMS Materials and Processes Handbook written by Reza Ghodssi and published by Springer Science & Business Media. This book was released on 2011-03-18 with total page 1211 pages. Available in PDF, EPUB and Kindle. Book excerpt: MEMs Materials and Processes Handbook" is a comprehensive reference for researchers searching for new materials, properties of known materials, or specific processes available for MEMS fabrication. The content is separated into distinct sections on "Materials" and "Processes". The extensive Material Selection Guide" and a "Material Database" guides the reader through the selection of appropriate materials for the required task at hand. The "Processes" section of the book is organized as a catalog of various microfabrication processes, each with a brief introduction to the technology, as well as examples of common uses in MEMs.

Download or read book An Introduction to Microelectromechanical Systems Engineering written by Nadim Maluf and published by Artech House. This book was released on 2004 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bringing you up-to-date with the latest developments in MEMS technology, this major revision of the best-selling An Introduction to Microelectromechanical Systems Engineering offers you a current understanding of this cutting-edge technology. You gain practical knowledge of MEMS materials, design, and manufacturing, and learn how it is being applied in industrial, optical, medical and electronic markets. The second edition features brand new sections on RF MEMS, photo MEMS, micromachining on materials other than silicon, reliability analysis, plus an expanded reference list. With an emphasis on commercialized products, this unique resource helps you determine whether your application can benefit from a MEMS solution, understand how other applications and companies have benefited from MEMS, and select and define a manufacturable MEMS process for your application. You discover how to use MEMS technology to enable new functionality, improve performance, and reduce size and cost. The book teaches you the capabilities and limitations of MEMS devices and processes, and helps you communicate the relative merits of MEMS to your company's management. From critical discussions on design operation and process fabrication of devices and systems, to a thorough explanation of MEMS packaging, this easy-to-understand book clearly explains the basics of MEMS engineering, making it an invaluable reference for your work in the field.

Download or read book Economic Analysis of Using MEMS Technology for Monitoring Warp Tension and Breaks in Weaving written by and published by . This book was released on 2001 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Micro-electro-mechanical-systems (MEMS) comprise a range of technologies that enable the fabrication of micron-sized, solid state devices such as sensors and actuators. MEMS manufacturing technologies enable the development of many exciting micro-scale or micro miniaturized products. This paper presents a decision model for evaluating the potential cost/benefit of different applications of MEMS for textiles. The objective is to determine the feasibility of replacing current warp tension measurement methods with MEMS. In order to accomplish this goal, a literature survey was conducted to document the current economic models and cost justification issues as well as the fundamentals of MEMS. From this survey, decision methodologies were identified and a decision model was established. To establish this model, Microsoft Excel (version Excel 2000) spreadsheet was used as a tool. The results from this model have been used to analyze the feasibility of using MEMS technology in measuring warp tension for textile applications. Finally, conclusions and recommendations for future applications have been covered.

Download or read book MEMS Accelerometers written by Mahmoud Rasras and published by MDPI. This book was released on 2019-05-27 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micro-electro-mechanical system (MEMS) devices are widely used for inertia, pressure, and ultrasound sensing applications. Research on integrated MEMS technology has undergone extensive development driven by the requirements of a compact footprint, low cost, and increased functionality. Accelerometers are among the most widely used sensors implemented in MEMS technology. MEMS accelerometers are showing a growing presence in almost all industries ranging from automotive to medical. A traditional MEMS accelerometer employs a proof mass suspended to springs, which displaces in response to an external acceleration. A single proof mass can be used for one- or multi-axis sensing. A variety of transduction mechanisms have been used to detect the displacement. They include capacitive, piezoelectric, thermal, tunneling, and optical mechanisms. Capacitive accelerometers are widely used due to their DC measurement interface, thermal stability, reliability, and low cost. However, they are sensitive to electromagnetic field interferences and have poor performance for high-end applications (e.g., precise attitude control for the satellite). Over the past three decades, steady progress has been made in the area of optical accelerometers for high-performance and high-sensitivity applications but several challenges are still to be tackled by researchers and engineers to fully realize opto-mechanical accelerometers, such as chip-scale integration, scaling, low bandwidth, etc. This Special Issue on "MEMS Accelerometers" seeks to highlight research papers, short communications, and review articles that focus on: Novel designs, fabrication platforms, characterization, optimization, and modeling of MEMS accelerometers. Alternative transduction techniques with special emphasis on opto-mechanical sensing. Novel applications employing MEMS accelerometers for consumer electronics, industries, medicine, entertainment, navigation, etc. Multi-physics design tools and methodologies, including MEMS-electronics co-design. Novel accelerometer technologies and 9DoF IMU integration. Multi-accelerometer platforms and their data fusion.

Download or read book Microelectromechanical Systems written by Committee on Advanced Materials and Fabrication Methods for Microelectromechanical Systems and published by National Academies Press. This book was released on 1997-12-15 with total page 76 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microelectromenchanical systems (MEMS) is a revolutionary field that adapts for new uses a technology already optimized to accomplish a specific set of objectives. The silicon-based integrated circuits process is so highly refined it can produce millions of electrical elements on a single chip and define their critical dimensions to tolerances of 100-billionths of a meter. The MEMS revolution harnesses the integrated circuitry know-how to build working microsystems from micromechanical and microelectronic elements. MEMS is a multidisciplinary field involving challenges and opportunites for electrical, mechanical, chemical, and biomedical engineering as well as physics, biology, and chemistry. As MEMS begin to permeate more and more industrial procedures, society as a whole will be strongly affected because MEMS provide a new design technology that could rival--perhaps surpass--the societal impact of integrated circuits.

Download or read book Portable Spectroscopy and Spectrometry Technologies and Instrumentation written by Richard A. Crocombe and published by John Wiley & Sons. This book was released on 2021-04-19 with total page 612 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides complete and up-to-date coverage of the foundational principles, enabling technologies, and specific instruments of portable spectrometry Portable Spectroscopy and Spectrometry: Volume One is both a timely overview of the miniature technologies used in spectrometry, and an authoritative guide to the specific instruments employed in a wide range of disciplines. This much-needed resource is the first comprehensive work to describe the enabling technologies of portable spectrometry, explain how various handheld and portable instruments work, discuss their potential limitations, and provide clear guidance on optimizing their utility and accuracy in the field. In-depth chapters—written by a team of international authors from a wide range of disciplinary backgrounds—have been carefully reviewed both by the editors and by third-party experts to ensure their quality and completeness. Volume One begins with general discussion of portable spectrometer engineering before moving through the electromagnetic spectrum to cover x-ray fluorescence (XRF), UV-visible, near-infrared, mid-infrared, and Raman spectroscopies. Subsequent chapters examine microplasmas, laser induced breakdown spectroscopy (LIBS), nuclear magnetic resonance (NMR) spectroscopy, and a variety of portable mass spectrometry instrument types. Featuring detailed chapters on DNA instrumentation and biological analyzers—topics of intense interest in light of the global coronavirus pandemic—this timely volume: Provides comprehensive coverage of the principles and instruments central to portable spectroscopy Includes contributions by experienced professionals working in instrument companies, universities, research institutes, the military, and hazardous material teams Discusses special topics such as smartphone spectroscopy, optical filter technology, stand-off detection, and MEMS/MOEMS technology Covers elemental spectroscopy, optical molecular spectroscopy, mass spectrometry, and molecular and imaging technologies Portable Spectroscopy and Spectrometry: Volume One is an indispensable resource for developers of portable instruments, civilian and government purchasers and operators, and teachers and students of portable spectroscopy. When combined with Volume Two, which focuses on the multitude of applications of portable instrumentation, Portable Spectroscopy and Spectrometry provides the most thorough coverage of the field currently available.

Download or read book Technical Proceedings of the 2007 Cleantech Conference and Trade Show written by NanoScience & Technology Inst and published by CRC Press. This book was released on 2019-08-22 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Cleantech conference, which runs parallel with NSTI's Nanotech, is designed to promote advancements in traditional technologies, emerging technologies, and clean business practices, covering important developments in renewable energy, clean technologies, business and policy, bio-energy, and novel technologies, as well as environme

Download or read book MEMS and NEMS written by Sergey Edward Lyshevski and published by CRC Press. This book was released on 2018-10-03 with total page 335 pages. Available in PDF, EPUB and Kindle. Book excerpt: The development of micro- and nano-mechanical systems (MEMS and NEMS) foreshadows momentous changes not only in the technological world, but in virtually every aspect of human life. The future of the field is bright with opportunities, but also riddled with challenges, ranging from further theoretical development through advances in fabrication technologies, to developing high-performance nano- and microscale systems, devices, and structures, including transducers, switches, logic gates, actuators and sensors. MEMS and NEMS: Systems, Devices, and Structures is designed to help you meet those challenges and solve fundamental, experimental, and applied problems. Written from a multi-disciplinary perspective, this book forms the basis for the synthesis, modeling, analysis, simulation, control, prototyping, and fabrication of MEMS and NEMS. The author brings together the various paradigms, methods, and technologies associated with MEMS and NEMS to show how to synthesize, analyze, design, and fabricate them. Focusing on the basics, he illustrates the development of NEMS and MEMS architectures, physical representations, structural synthesis, and optimization. The applications of MEMS and NEMS in areas such as biotechnology, medicine, avionics, transportation, and defense are virtually limitless. This book helps prepare you to take advantage of their inherent opportunities and effectively solve problems related to their configurations, systems integration, and control.

Download or read book Mems Nems written by Cornelius T. Leondes and published by Springer Science & Business Media. This book was released on 2007-10-08 with total page 2142 pages. Available in PDF, EPUB and Kindle. Book excerpt: This significant and uniquely comprehensive five-volume reference is a valuable source for research workers, practitioners, computer scientists, students, and technologists. It covers all of the major topics within the subject and offers a comprehensive treatment of MEMS design, fabrication techniques, and manufacturing methods. It also includes current medical applications of MEMS technology and provides applications of MEMS to opto-electronic devices. It is clearly written, self-contained, and accessible, with helpful standard features including an introduction, summary, extensive figures and design examples with comprehensive reference lists.

Download or read book Proceedings of 2020 Chinese Intelligent Systems Conference written by Yingmin Jia and published by Springer Nature. This book was released on 2020-09-29 with total page 841 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book focuses on new theoretical results and techniques in the field of intelligent systems and control. It provides in-depth studies on a number of major topics such as Multi-Agent Systems, Complex Networks, Intelligent Robots, Complex System Theory and Swarm Behavior, Event-Triggered Control and Data-Driven Control, Robust and Adaptive Control, Big Data and Brain Science, Process Control, Intelligent Sensor and Detection Technology, Deep learning and Learning Control Guidance, Navigation and Control of Flight Vehicles and so on. Given its scope, the book will benefit all researchers, engineers, and graduate students who want to learn about cutting-edge advances in intelligent systems, intelligent control, and artificial intelligence.

Download or read book Intelligent Control and Applications for Robotics Volume II written by Yimin Zhou and published by Frontiers Media SA. This book was released on 2023-11-22 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: Driven by sustaining demands from industrial automation, space applications and the lack of labor forces, robotics has received increasing attention from researchers in the field of automation and control. Optimizing control schemes is critical to fully exploit the potential of industrial and daily-use robots. Usually, accuracy and repeatability are measured to evaluate the performance of a robot, and deviation of the two parameters from normal status would inevitably leads to positional error and creates a problem for the process. Moreover, the repeatability of a robot is different in various parts of the working envelope, fluctuating with speed and payload. Due to the inherent complexity, an advanced learning methodology is crucial to the self-learning and fast adaptation to disturbances.

Download or read book Microelectromechanical Systems and Devices written by Nazmul Islam and published by BoD – Books on Demand. This book was released on 2012-03-28 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: The advances of microelectromechanical systems (MEMS) and devices have been instrumental in the demonstration of new devices and applications, and even in the creation of new fields of research and development: bioMEMS, actuators, microfluidic devices, RF and optical MEMS. Experience indicates a need for MEMS book covering these materials as well as the most important process steps in bulk micro-machining and modeling. We are very pleased to present this book that contains 18 chapters, written by the experts in the field of MEMS. These chapters are groups into four broad sections of BioMEMS Devices, MEMS characterization and micromachining, RF and Optical MEMS, and MEMS based Actuators. The book starts with the emerging field of bioMEMS, including MEMS coil for retinal prostheses, DNA extraction by micro/bio-fluidics devices and acoustic biosensors. MEMS characterization, micromachining, macromodels, RF and Optical MEMS switches are discussed in next sections. The book concludes with the emphasis on MEMS based actuators.