Download or read book MEMS and Nanotechnology Volume 4 written by Tom Proulx and published by Springer Science & Business Media. This book was released on 2011-05-21 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: MEMS and Nanotechnology, Volume 4 represents one of eight volumes of technical papers presented at the Society for Experimental Mechanics Annual Conference on Experimental and Applied Mechanics, held at Uncasville, Connecticut, June 13-16, 2011. The full set of proceedings also includes volumes on Dynamic Behavior of Materials, Mechanics of Biological Systems and Materials, Mechanics of Time-Dependent Materials and Processes in Conventional and Multifunctional Materials; Optical Measurements, Modeling and, Metrology; Experimental and Applied Mechanics, Thermomechanics and Infra-Red Imaging, and Engineering Applications of Residual Stress.
Download or read book MEMS and Nanotechnology Volume 2 written by Tom Proulx and published by Springer Science & Business Media. This book was released on 2011-03-24 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: This the second volume of six from the Annual Conference of the Society for Experimental Mechanics, 2010, brings together 40 chapters on Microelectromechanical Systems and Nanotechnology. It presents early findings from experimental and computational investigations on MEMS and Nanotechnology including contributions on Nanomechanical Standards, Magneto-mechanical MEMS Sensors, Piezoelectric MEMS for Energy Harvesting, and Linear and Nonlinear Mass Sensing.
Download or read book Mems and Nanotechnology written by Tom Proulx and published by . This book was released on 2011-05-23 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book BioMEMS and Biomedical Nanotechnology written by Mihrimah Ozkan and published by Springer Science & Business Media. This book was released on 2007-04-03 with total page 554 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contributions reporting on fundamental and applied investigations of the material science, biochemistry, and physics of biomedical microdevices with applications to Genomics and Proteomics. Topics include gene expression profiling utilizing microarray technology; imaging and sensing for gene detection and use in DNA analysis; and coverage of advanced microfluidic devices and the Humane Genome Project.
Download or read book Materials and Failures in MEMS and NEMS written by Atul Tiwari and published by John Wiley & Sons. This book was released on 2015-09-11 with total page 435 pages. Available in PDF, EPUB and Kindle. Book excerpt: The fabrication of MEMS has been predominately achieved by etching the polysilicon material. However, new materials are in large demands that could overcome the hurdles in fabrication or manufacturing process. Although, an enormous amount of work being accomplished in the area, most of the information is treated as confidential or privileged. It is extremely hard to find the meaningful information for the new or related developments. This book is collection of chapters written by experts in MEMS and NEMS technology. Chapters are contributed on the development of new MEMS and NEMS materials as well as on the properties of these devices. Important properties such as residual stresses and buckling behavior in the devices are discussed as separate chapters. Various models have been included in the chapters that studies the mode and mechanism of failure of the MEMS and NEMS. This book is meant for the graduate students, research scholars and engineers who are involved in the research and developments of advanced MEMS and NEMS for a wide variety of applications. Critical information has been included for the readers that will help them in gaining precise control over dimensional stability, quality, reliability, productivity and maintenance in MEMS and NEMS. No such book is available in the market that addresses the developments and failures in these advanced devices.
Download or read book Springer Handbook of Nanotechnology written by Bharat Bhushan and published by Springer. This book was released on 2006-11-10 with total page 1916 pages. Available in PDF, EPUB and Kindle. Book excerpt: This major work has established itself as the definitive reference in the nanoscience and nanotechnology area in one volume. In presents nanostructures, micro/nanofabrication, and micro/nanodevices. Special emphasis is on scanning probe microscopy, nanotribology and nanomechanics, molecularly thick films, industrial applications and microdevice reliability, and on social aspects. Reflecting further developments, the new edition has grown from six to eight parts. The latest information is added to fields such as bionanotechnology, nanorobotics, and NEMS/MEMS reliability. This classic reference book is orchestrated by a highly experienced editor and written by a team of distinguished experts for those learning about the field of nanotechnology.
Download or read book Electrical Contacts written by Paul G. Slade and published by CRC Press. This book was released on 2017-12-19 with total page 1314 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering the theory, application, and testing of contact materials, Electrical Contacts: Principles and Applications, Second Edition introduces a thorough discussion on making electric contact and contact interface conduction; presents a general outline of, and measurement techniques for, important corrosion mechanisms; considers the results of contact wear when plug-in connections are made and broken; investigates the effect of thin noble metal plating on electronic connections; and relates crucial considerations for making high- and low-power contact joints. It examines contact use in switching devices, including the interruption of AC and DC circuits with currents in the range 10mA to 100kA and circuits up to 1000V, and describes arc formation between open contacts and between opening contacts. Arcing effects on contacts such as erosion, welding, and contamination are also addressed. Containing nearly 3,000 references, tables, equations, figures, drawings, and photographs, the book provides practical examples encompassing everything from electronic circuits to high power circuits, or microamperes to mega amperes. The new edition: Reflects the latest advances in electrical contact science and technology Examines current research on contact corrosion, materials, and switching Includes updates and revisions in each chapter, as well as up-to-date references and new figures and examples throughout Delivers three new chapters on the effects of dust contamination, electronic sensing for switching systems, and contact phenomena for micro-electronic systems (MEMS) applications With contributions from recognized experts in the field, Electrical Contacts: Principles and Applications, Second Edition assists practicing scientists and engineers in the prevention of costly system failures, as well as offers a comprehensive introduction to the subject for technology graduate students, by expanding their knowledge of electrical contact phenomena.
Download or read book MEMS Product Development written by Alissa M. Fitzgerald and published by Springer Nature. This book was released on 2021-03-16 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: Drawing on their experiences in successfully executing hundreds of MEMS development projects, the authors present the first practical guide to navigating the technical and business challenges of MEMS product development, from the initial concept stage all the way to commercialization. The strategies and tactics presented, when practiced diligently, can shorten development timelines, help avoid common pitfalls, and improve the odds of success, especially when resources are limited. MEMS Product Development illuminates what it really takes to develop a novel MEMS product so that innovators, designers, entrepreneurs, product managers, investors, and executives may properly prepare their companies to succeed.
Download or read book Nanotechnology written by Jeremy Ramsden and published by William Andrew. This book was released on 2016-05-11 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanotechnology: An Introduction, Second Edition, is ideal for the newcomer to nanotechnology, someone who also brings a strong background in one of the traditional disciplines, such as physics, mechanical or electrical engineering, or chemistry or biology, or someone who has experience working in microelectromechanical systems (MEMS) technology. This book brings together the principles, theory, and practice of nanotechnology, giving a broad, yet authoritative, introduction to the possibilities and limitations of this exciting and rapidly developing field. The book's author, Prof Ramsden, also discusses design, manufacture, and applications and their impact on a wide range of nanotechnology areas. - Provides an overview of the rapidly growing and developing field of nanotechnology - Focuses on key essentials, and structured around a robust anatomy of the subject - Brings together the principles, theory, and practice of nanotechnology, giving a broad, yet authoritative, introduction to the possibilities and limitations of this exciting and rapidly developing field
Download or read book Microelectromechanical Systems and Devices written by Nazmul Islam and published by BoD – Books on Demand. This book was released on 2012-03-28 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: The advances of microelectromechanical systems (MEMS) and devices have been instrumental in the demonstration of new devices and applications, and even in the creation of new fields of research and development: bioMEMS, actuators, microfluidic devices, RF and optical MEMS. Experience indicates a need for MEMS book covering these materials as well as the most important process steps in bulk micro-machining and modeling. We are very pleased to present this book that contains 18 chapters, written by the experts in the field of MEMS. These chapters are groups into four broad sections of BioMEMS Devices, MEMS characterization and micromachining, RF and Optical MEMS, and MEMS based Actuators. The book starts with the emerging field of bioMEMS, including MEMS coil for retinal prostheses, DNA extraction by micro/bio-fluidics devices and acoustic biosensors. MEMS characterization, micromachining, macromodels, RF and Optical MEMS switches are discussed in next sections. The book concludes with the emphasis on MEMS based actuators.
Download or read book Electrochemical Nanotechnologies written by Tetsuya Osaka and published by Springer Science & Business Media. This book was released on 2009-12-15 with total page 283 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book, the term "electrochemical nanotechnology" is defined as nanoprocessing by means of electrochemical techniques. This introductory book reviews the application of electrochemical nanotechnologies with the aim of understanding their wider applicability in evolving nanoindustries. These advances have impacted microelectronics, sensors, materials science, and corrosion science, generating new fields of research that promote interaction between biology, medicine, and microelectronics. This volume reviews nanotechnology applications in selected high technology areas with particular emphasis on advances in such areas. Chapters are classified under four different headings: Nanotechnology for energy devices - Nanotechnology for magnetic storage devices - Nanotechnology for bio-chip applications - Nanotechnology for MEMS/Packaging.
Download or read book Software Technology And Engineering Proceedings Of The International Conference On Icste 2009 written by Venkatesh Mahadevan and published by World Scientific. This book was released on 2009-07-16 with total page 415 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 2009 International Conference on Software Technology and Engineering (ICSTE 2009) will be held in Chennai, India during July 24-26, 2009. The objective of the ICSTE 2009 is to provide a platform for researchers, engineers, academicians as well as industrial professionals from all over the world to present their research results and development activities in Software Technology and Engineering. This conference provides opportunities for the delegates to exchange new ideas and application experiences, to establish business or research relations and to find global partners for future collaboration. Submitted conference papers will be reviewed by technical committees of the conference.
Download or read book Handbook of Conducting Polymers 2 Volume Set written by Terje A. Skotheim and published by CRC Press. This book was released on 2007-01-16 with total page 1692 pages. Available in PDF, EPUB and Kindle. Book excerpt: Learn how recent advances are fueling new possibilities in textiles, optics, electronics, and biomedicine! As the field of conjugated, electrically conducting, and electroactive polymers has grown, the Handbook of Conducting Polymers has been there to document and celebrate these changes along the way. Now split into two vo
Download or read book Mechanical Properties of Structural Films written by Christopher L. Muhlstein and published by ASTM International. This book was released on 2001 with total page 333 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent advances in the mechanical properties of structural films are described in these papers from a November 2000 symposium held in Orlando, Florida. Papers are organized in sections on fracture and fatigue of structural films, elastic behavior and residual stress in thin films, tensile testing of
Download or read book Advanced Micro and Nano manufacturing Technologies written by Shrikrishna Nandkishor Joshi and published by Springer Nature. This book was released on 2021-10-01 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume focuses on the fundamentals and advancements in micro and nanomanufacturing technologies applied in the biomedical and biochemical domain. The contents of this volume provide comprehensive coverage of the physical principles of advanced manufacturing technologies and the know-how of their applications in the fabrication of biomedical devices and systems. The book begins by documenting the journey of miniaturization and micro-and nano-fabrication. It then delves into the fundamentals of various advanced technologies such as micro-wire moulding, 3D printing, lithography, imprinting, direct laser machining, and laser-induced plasma-assisted machining. It also covers laser-based technologies which are a promising option due to their flexibility, ease in control and application, high precision, and availability. These technologies can be employed to process several materials such as glass, polymers: polycarbonate, polydimethylsiloxane, polymethylmethacrylate, and metals such as stainless steel, which are commonly used in the fabrication of biomedical devices, such as microfluidic technology, optical and fiber-optic sensors, and electro-chemical bio-sensors. It also discusses advancements in various MEMS/NEMS based technologies and their applications in energy conversion and storage devices. The chapters are written by experts from the fields of micro- and nano-manufacturing, materials engineering, nano-biotechnology, and end-users such as clinicians, engineers, academicians of interdisciplinary background. This book will be a useful guide for academia and industry alike.
Download or read book Micro and Smart Devices and Systems written by K. J. Vinoy and published by Springer. This book was released on 2014-05-21 with total page 509 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents cutting-edge research in the emerging fields of micro, nano and smart devices and systems from experts working in these fields over the last decade. Most of the contributors have built devices or systems or developed processes or algorithms in these areas. The book is a unique collection of chapters from different areas with a common theme and is immensely useful to academic researchers and practitioners in the industry who work in this field.
Download or read book Electrochemical Micromachining for Nanofabrication MEMS and Nanotechnology written by Bijoy Bhattacharyya and published by William Andrew. This book was released on 2015-04-10 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electrochemical Micromachining for Nanofabrication, MEMS and Nanotechnology is the first book solely dedicated to electrochemical micromachining (EMM). It begins with fundamentals, techniques, processes, and conditions, continuing with in-depth discussions of mechanisms of material removal, including an empirical model on the material removal rate for EMM (supported by experimental validation). The book moves next to construction-related features of EMM setup suitable for industrial micromachining applications, varying types of EMM, and the latest developments in the improvement of EMM setup. Further, it covers power supply, roll of electrolyte, and other major factors influencing EMM processes, and reports research findings concerning the improvement of machining accuracy and efficiency. Finally, the book devotes a chapter to the design and development of micro-tools, one of the most vital components in EMM. - Covers the generation of micro features used for advanced engineering of materials for fabrication of MEMS, microsystems and other micro-engineering applications - Explores the trend of decreasing size of fabricated devices, reflected in coverage of generation of high-precision nano-features on metal and semiconductors utilizing SPM, STM, and AFM, and nanotechnology aspects of EMM - Describes nanofabrication utilizing anodic dissolutions for mass manufacturing by overcoming obstacles utilizing electrochemical microsystem technology (EMST) and electrochemical nanotechnology (ENT)
