Download or read book MEMS and Microstructures in Aerospace Applications written by Robert Osiander and published by CRC Press. This book was released on 2018-10-03 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: The promise of MEMS for aerospace applications has been germinating for years, and current advances bring the field to the very cusp of fruition. Reliability is chief among the challenges limiting the deployment of MEMS technologies in space, as the requirement of zero failure during the mission is quite stringent for this burgeoning field. MEMS and Microstructures in Aerospace Applications provides all the necessary tools to overcome these obstacles and take MEMS from the lab bench to beyond the exosphere. The book begins with an overview of MEMS development and provides several demonstrations of past and current examples of MEMS in space. From this platform, the discussion builds to fabrication technologies; the effect of space environmental factors on MEMS devices; and micro technologies for space systems, instrumentation, communications, thermal control, guidance navigation and control, and propulsion. Subsequent chapters explore factors common to all of the described systems, such as MEMS packaging, handling and contamination control, material selection for specific applications, reliability practices for design and application, and assurance practices. Edited and contributed by an outstanding team of leading experts from industry, academia, and national laboratories, MEMS and Microstructures in Aerospace Applications illuminates the path toward qualifying and integrating MEMS devices and instruments into future space missions and developing innovative satellite systems.
Download or read book Mems for Automotive and Aerospace Applications written by Michael Kraft and published by Elsevier. This book was released on 2013-01-02 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: MEMS for automotive and aerospace applications reviews the use of Micro-Electro-Mechanical-Systems (MEMS) in developing solutions to the unique challenges presented by the automotive and aerospace industries. Part one explores MEMS for a variety of automotive applications. The role of MEMS in passenger safety and comfort, sensors for automotive vehicle stability control applications and automotive tire pressure monitoring systems are considered, along with pressure and flow sensors for engine management, and RF MEMS for automotive radar sensors. Part two then goes on to explore MEMS for aerospace applications, including devices for active drag reduction in aerospace applications, inertial navigation and structural health monitoring systems, and thrusters for nano- and pico-satellites. A selection of case studies are used to explore MEMS for harsh environment sensors in aerospace applications, before the book concludes by considering the use of MEMS in space exploration and exploitation. With its distinguished editors and international team of expert contributors, MEMS for automotive and aerospace applications is a key tool for MEMS manufacturers and all scientists, engineers and academics working on MEMS and intelligent systems for transportation. Chapters consider the role of MEMS in a number of automotive applications, including passenger safety and comfort, vehicle stability and control MEMS for aerospace applications are also discussed, including active drag reduction, inertial navigation and structural health monitoring systems Presents a number of case studies exploring MEMS for harsh environment sensors in aerospace
Download or read book MEMS Micro ElectroMechanical Systems in Aerospace Applications written by Technology Research Editors and published by Search-In-Print. This book was released on 2006-01-01 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book MEMS and Nanotechnology Volume 4 written by Tom Proulx and published by Springer Science & Business Media. This book was released on 2011-05-21 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: MEMS and Nanotechnology, Volume 4 represents one of eight volumes of technical papers presented at the Society for Experimental Mechanics Annual Conference on Experimental and Applied Mechanics, held at Uncasville, Connecticut, June 13-16, 2011. The full set of proceedings also includes volumes on Dynamic Behavior of Materials, Mechanics of Biological Systems and Materials, Mechanics of Time-Dependent Materials and Processes in Conventional and Multifunctional Materials; Optical Measurements, Modeling and, Metrology; Experimental and Applied Mechanics, Thermomechanics and Infra-Red Imaging, and Engineering Applications of Residual Stress.
Download or read book Implantable Sensor Systems for Medical Applications written by Andreas Inmann and published by Elsevier. This book was released on 2013-01-02 with total page 535 pages. Available in PDF, EPUB and Kindle. Book excerpt: Implantable sensor systems offer great potential for enhanced medical care and improved quality of life, consequently leading to major investment in this exciting field. Implantable sensor systems for medical applications provides a wide-ranging overview of the core technologies, key challenges and main issues related to the development and use of these devices in a diverse range of medical applications.Part one reviews the fundamentals of implantable systems, including materials and material-tissue interfaces, packaging and coatings, microassembly, electrode array design and fabrication, and the use of biofuel cells as sustainable power sources. Part two goes on to consider the challenges associated with implantable systems. Biocompatibility, sterilization considerations and the development of active implantable medical devices in a regulated environment are discussed, along with issues regarding data protection and patient privacy in medical sensor networks. Applications of implantable systems are then discussed in part three, beginning with Microelectromechanical systems (MEMS) for in-vivo applications before further exploration of tripolar interfaces for neural recording, sensors for motor neuroprostheses, implantable wireless body area networks and retina implants.With its distinguished editors and international team of expert contributors, Implantable sensor systems for medical applications is a comprehensive guide for all those involved in the design, development and application of these life-changing technologies. Provides a wide-ranging overview of the core technologies, key challenges and main issues related to the development and use of implantable sensor systems in a range of medical applications Reviews the fundamentals of implantable systems, including materials and material-tissue interfaces, packaging and coatings, and microassembly Considers the challenges associated with implantable systems, including biocompatibility and sterilization
Download or read book Nanorobotics written by Constantinos Mavroidis and published by Springer Science & Business Media. This book was released on 2013-01-04 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanorobots can be defined as intelligent systems with overall dimensions at or below the micrometer range that are made of assemblies of nanoscale components with individual dimensions ranging between 1 to 100 nm. These devices can now perform a wide variety of tasks at the nanoscale in a wide variety of fields including but not limited to fields such as manufacturing, medicine, supply chain, biology, and aerospace. Nanorobotics: Current Approaches and Techniques offers a comprehensive overview of this emerging interdisciplinary field with a wide ranging discussion that includes nano-manipulation and industrial nanorobotics, nanorobotic manipulation in biology and medicine, nanorobotic sensing, navigation and swarm behavior and CNT, and protein and DNA-based nanorobotics.
Download or read book Sensors for Automotive and Aerospace Applications written by Shantanu Bhattacharya and published by Springer. This book was released on 2018-11-01 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume covers the various sensors related to automotive and aerospace sectors, discussing their properties as well as how they are realized, calibrated and deployed. Written by experts in the field, it provides a ready reference to product developers, researchers and students working on sensor design and fabrication, and provides perspective on both current and future research.
Download or read book Mems for Biomedical Applications written by Shekhar Bhansali and published by Elsevier. This book was released on 2012-07-18 with total page 511 pages. Available in PDF, EPUB and Kindle. Book excerpt: The application of Micro Electro Mechanical Systems (MEMS) in the biomedical field is leading to a new generation of medical devices. MEMS for biomedical applications reviews the wealth of recent research on fabrication technologies and applications of this exciting technology.The book is divided into four parts: Part one introduces the fundamentals of MEMS for biomedical applications, exploring the microfabrication of polymers and reviewing sensor and actuator mechanisms. Part two describes applications of MEMS for biomedical sensing and diagnostic applications. MEMS for in vivo sensing and electrical impedance spectroscopy are investigated, along with ultrasonic transducers, and lab-on-chip devices. MEMS for tissue engineering and clinical applications are the focus of part three, which considers cell culture and tissue scaffolding devices, BioMEMS for drug delivery and minimally invasive medical procedures. Finally, part four reviews emerging biomedical applications of MEMS, from implantable neuroprobes and ocular implants to cellular microinjection and hybrid MEMS.With its distinguished editors and international team of expert contributors, MEMS for biomedical applications provides an authoritative review for scientists and manufacturers involved in the design and development of medical devices as well as clinicians using this important technology. Reviews the wealth of recent research on fabrication technologies and applications of Micro Electro Mechanical Systems (MEMS) in the biomedical field Introduces the fundamentals of MEMS for biomedical applications, exploring the microfabrication of polymers and reviewing sensor and actuator mechanisms Considers MEMS for biomedical sensing and diagnostic applications, along with MEMS for in vivo sensing and electrical impedance spectroscopy
Download or read book International Youth Conference on Electronics Telecommunications and Information Technologies written by Elena Velichko and published by Springer Nature. This book was released on 2022-01-12 with total page 594 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents peer-reviewed and selected papers of the International Youth Conference on Electronics, Telecommunications, and Information Technologies (YETI-2021), held in Peter the Great St. Petersburg Polytechnic University, St. Petersburg, on April 22–23, 2021. For the third time around, the conference brings together students and early career scientists, serving to disseminate the current trends and advances in electronics, telecommunications, optical, and information technologies. A series of workshops and poster sessions focusing, in particular, on the theoretical and practical challenges in nanotechnologies, photonics, signal processing, and telecommunications allow to establish contacts between potential partners, share new ideas, and start new collaborations. The conference is held in an online format, thus considerably expanding its geographical reach and offering an even wider scope of discussion.
Download or read book Proceedings of Regional Tribology Conference 2011 written by M.A. Maleque and published by Malaysian Tribology Society. This book was released on 2011-11-22 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a compilation of papers presented at the Regional Tribology Conference 2011 (RTC2011) - Langkawi, Malaysia on 22 ~ 24 November 2011.
Download or read book Microsensors written by Oleg Minin and published by BoD – Books on Demand. This book was released on 2011-06-09 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is planned to publish with an objective to provide a state-of-art reference book in the area of microsensors for engineers, scientists, applied physicists and post-graduate students. Also the aim of the book is the continuous and timely dissemination of new and innovative research and developments in microsensors. This reference book is a collection of 13 chapters characterized in 4 parts: magnetic sensors, chemical, optical microsensors and applications. This book provides an overview of resonant magnetic field microsensors based on MEMS, optical microsensors, the main design and fabrication problems of miniature sensors of physical, chemical and biochemical microsensors, chemical microsensors with ordered nanostructures, surface-enhanced Raman scattering microsensors based on hybrid nanoparticles, etc. Several interesting applications area are also discusses in the book like MEMS gyroscopes for consumer and industrial applications, microsensors for non invasive imaging in experimental biology, a heat flux microsensor for direct measurements in plasma surface interactions and so on.
Download or read book Evolvable Systems From Biology to Hardware written by Gregory S. Hornby and published by Springer Science & Business Media. This book was released on 2008-09-08 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 8th International Conference on Evolvable Systems, ICES 2008, held in Prague, Czech Republic, in September 2008. The 28 revised full papers and 14 revised poster papers presented were carefully reviewed and selected from 52 submissions. The papers are organized in topical sections on evolution of analog circuits, evolution of digital circuits, hardware-software codesign and platforms for adaptive systems, evolutionary robotics, development, real-world applications, evolutionary networking, evolvable artificial neural networks, and transistor-level circuit evolution.
Download or read book Smart Material Systems and MEMS written by Vijay K. Varadan and published by John Wiley & Sons. This book was released on 2006-11-02 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presenting unified coverage of the design and modeling of smart micro- and macrosystems, this book addresses fabrication issues and outlines the challenges faced by engineers working with smart sensors in a variety of applications. Part I deals with the fundamental concepts of a typical smart system and its constituent components. Preliminary fabrication and characterization concepts are introduced before design principles are discussed in detail. Part III presents a comprehensive account of the modeling of smart systems, smart sensors and actuators. Part IV builds upon the fundamental concepts to analyze fabrication techniques for silicon-based MEMS in more detail. Practicing engineers will benefit from the detailed assessment of applications in communications technology, aerospace, biomedical and mechanical engineering. The book provides an essential reference or textbook for graduates following a course in smart sensors, actuators and systems.
Download or read book Handbook of Space Engineering Archaeology and Heritage written by Ann Darrin and published by CRC Press. This book was released on 2009-06-26 with total page 1038 pages. Available in PDF, EPUB and Kindle. Book excerpt: Some might think that the 27 thousand tons of material launched by earthlings into outer space is nothing more than floating piles of debris. However, when looking at these artifacts through the eyes of historians and anthropologists, instead of celestial pollution, they are seen as links to human history and heritage.Space: The New Frontier for Ar
Download or read book Nanosatellites written by Rogerio Atem de Carvalho and published by John Wiley & Sons. This book was released on 2020-03-19 with total page 712 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanosatellites: Space and Ground Technologies, Operations and Economics Rogerio Atem de Carvalho, Instituto Federal Fluminense, Brazil Jaime Estela, Spectrum Aerospace Group, Germany and Peru Martin Langer, Technical University of Munich, Germany Covering the latest research on nanosatellites Nanosatellites: Space and Ground Technologies, Operations and Economics comprehensively presents the latest research on the fast-developing area of nanosatellites. Divided into three distinct sections, the book begins with a brief history of nanosatellites and introduces nanosatellites technologies and payloads, also explaining how these are deployed into space. The second section provides an overview of the ground segment and operations, and the third section focuses on the regulations, policies, economics, and future trends. Key features: Payloads for nanosatellites Nanosatellites components design Examines the cost of development of nanosatellites. Covers the latest policies and regulations. Considers future trends for nanosatellites. Nanosatellites: Space and Ground Technologies, Operations and Economics is a comprehensive reference for researchers and practitioners working with nanosatellites in the aerospace industry.
Download or read book Systems Engineering for Microscale and Nanoscale Technologies written by M. Ann Garrison Darrin and published by CRC Press. This book was released on 2016-04-19 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt: To realize the full potential of micro- and nanoscale devices in system building, it is critical to develop systems engineering methodologies that successfully integrate stand-alone, small-scale technologies that can effectively interface with the macro world. So how do we accomplish this?Systems Engineering for Microscale and Nanoscale Technologie
Download or read book Vibration Analysis and Control in Mechanical Structures and Wind Energy Conversion Systems written by Francisco Beltran-Carbajal and published by BoD – Books on Demand. This book was released on 2018-04-18 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on recent and innovative methods on vibration analysis, system identification, and diverse control design methods for both wind energy conversion systems and vibrating systems. Advances on both theoretical and experimental studies about analysis and control of oscillating systems in several engineering disciplines are discussed. Various control devices are synthesized and implemented for vibration attenuation tasks. The book is addressed to researchers and practitioners on the subject, as well as undergraduate and postgraduate students and other experts and newcomers seeking more information about the state of the art, new challenges, innovative solutions, and new trends and developments in these areas. The six chapters of the book cover a wide range of interesting issues related to modeling, vibration control, parameter identification, active vehicle suspensions, tuned vibration absorbers, electronically controlled wind energy conversion systems, and other relevant case studies.
