Download or read book Memory Controllers for Real Time Embedded Systems written by Benny Akesson and published by Springer Science & Business Media. This book was released on 2011-09-15 with total page 235 pages. Available in PDF, EPUB and Kindle. Book excerpt: Verification of real-time requirements in systems-on-chip becomes more complex as more applications are integrated. Predictable and composable systems can manage the increasing complexity using formal verification and simulation. This book explains the concepts of predictability and composability and shows how to apply them to the design and analysis of a memory controller, which is a key component in any real-time system.
Download or read book Memory Controllers for Mixed Time Criticality Systems written by Sven Goossens and published by Springer. This book was released on 2016-04-11 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the design and performance analysis of SDRAM controllers that cater to both real-time and best-effort applications, i.e. mixed-time-criticality memory controllers. The authors describe the state of the art, and then focus on an architecture template for reconfigurable memory controllers that addresses effectively the quickly evolving set of SDRAM standards, in terms of worst-case timing and power analysis, as well as implementation. A prototype implementation of the controller in SystemC and synthesizable VHDL for an FPGA development board are used as a proof of concept of the architecture template.
Download or read book Real Time Embedded Systems written by Jiacun Wang and published by John Wiley & Sons. This book was released on 2017-07-10 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offering comprehensive coverage of the convergence of real-time embedded systems scheduling, resource access control, software design and development, and high-level system modeling, analysis and verification Following an introductory overview, Dr. Wang delves into the specifics of hardware components, including processors, memory, I/O devices and architectures, communication structures, peripherals, and characteristics of real-time operating systems. Later chapters are dedicated to real-time task scheduling algorithms and resource access control policies, as well as priority-inversion control and deadlock avoidance. Concurrent system programming and POSIX programming for real-time systems are covered, as are finite state machines and Time Petri nets. Of special interest to software engineers will be the chapter devoted to model checking, in which the author discusses temporal logic and the NuSMV model checking tool, as well as a chapter treating real-time software design with UML. The final portion of the book explores practical issues of software reliability, aging, rejuvenation, security, safety, and power management. In addition, the book: Explains real-time embedded software modeling and design with finite state machines, Petri nets, and UML, and real-time constraints verification with the model checking tool, NuSMV Features real-world examples in finite state machines, model checking, real-time system design with UML, and more Covers embedded computer programing, designing for reliability, and designing for safety Explains how to make engineering trade-offs of power use and performance Investigates practical issues concerning software reliability, aging, rejuvenation, security, and power management Real-Time Embedded Systems is a valuable resource for those responsible for real-time and embedded software design, development, and management. It is also an excellent textbook for graduate courses in computer engineering, computer science, information technology, and software engineering on embedded and real-time software systems, and for undergraduate computer and software engineering courses.
Download or read book Real Time Concepts for Embedded Systems written by Qing Li and published by CRC Press. This book was released on 2003-01-04 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: '... a very good balance between the theory and practice of real-time embedded system designs.' —Jun-ichiro itojun Hagino, Ph.D., Research Laboratory, Internet Initiative Japan Inc., IETF IPv6 Operations Working Group (v6ops) co-chair 'A cl
Download or read book Real Time Embedded Systems written by Xiaocong Fan and published by Newnes. This book was released on 2015-02-25 with total page 687 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book integrates new ideas and topics from real time systems, embedded systems, and software engineering to give a complete picture of the whole process of developing software for real-time embedded applications. You will not only gain a thorough understanding of concepts related to microprocessors, interrupts, and system boot process, appreciating the importance of real-time modeling and scheduling, but you will also learn software engineering practices such as model documentation, model analysis, design patterns, and standard conformance. This book is split into four parts to help you learn the key concept of embedded systems; Part one introduces the development process, and includes two chapters on microprocessors and interrupts---fundamental topics for software engineers; Part two is dedicated to modeling techniques for real-time systems; Part three looks at the design of software architectures and Part four covers software implementations, with a focus on POSIX-compliant operating systems. With this book you will learn: The pros and cons of different architectures for embedded systems POSIX real-time extensions, and how to develop POSIX-compliant real time applications How to use real-time UML to document system designs with timing constraints The challenges and concepts related to cross-development Multitasking design and inter-task communication techniques (shared memory objects, message queues, pipes, signals) How to use kernel objects (e.g. Semaphores, Mutex, Condition variables) to address resource sharing issues in RTOS applications The philosophy underpinning the notion of "resource manager" and how to implement a virtual file system using a resource manager The key principles of real-time scheduling and several key algorithms Coverage of the latest UML standard (UML 2.4) Over 20 design patterns which represent the best practices for reuse in a wide range of real-time embedded systems Example codes which have been tested in QNX---a real-time operating system widely adopted in industry
Download or read book Real Time Embedded Systems written by Meikang Qiu and published by CRC Press. This book was released on 2011-06-01 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ubiquitous in today's consumer-driven society, embedded systems use microprocessors that are hidden in our everyday products and designed to perform specific tasks. Effective use of these embedded systems requires engineers to be proficient in all phases of this effort, from planning, design, and analysis to manufacturing and marketing.Taking a sys
Download or read book Hands On RTOS with Microcontrollers written by Brian Amos and published by Packt Publishing Ltd. This book was released on 2020-05-15 with total page 479 pages. Available in PDF, EPUB and Kindle. Book excerpt: Build a strong foundation in designing and implementing real-time systems with the help of practical examples Key Features Get up and running with the fundamentals of RTOS and apply them on STM32 Enhance your programming skills to design and build real-world embedded systems Get to grips with advanced techniques for implementing embedded systems Book DescriptionA real-time operating system (RTOS) is used to develop systems that respond to events within strict timelines. Real-time embedded systems have applications in various industries, from automotive and aerospace through to laboratory test equipment and consumer electronics. These systems provide consistent and reliable timing and are designed to run without intervention for years. This microcontrollers book starts by introducing you to the concept of RTOS and compares some other alternative methods for achieving real-time performance. Once you've understood the fundamentals, such as tasks, queues, mutexes, and semaphores, you'll learn what to look for when selecting a microcontroller and development environment. By working through examples that use an STM32F7 Nucleo board, the STM32CubeIDE, and SEGGER debug tools, including SEGGER J-Link, Ozone, and SystemView, you'll gain an understanding of preemptive scheduling policies and task communication. The book will then help you develop highly efficient low-level drivers and analyze their real-time performance and CPU utilization. Finally, you'll cover tips for troubleshooting and be able to take your new-found skills to the next level. By the end of this book, you'll have built on your embedded system skills and will be able to create real-time systems using microcontrollers and FreeRTOS.What you will learn Understand when to use an RTOS for a project Explore RTOS concepts such as tasks, mutexes, semaphores, and queues Discover different microcontroller units (MCUs) and choose the best one for your project Evaluate and select the best IDE and middleware stack for your project Use professional-grade tools for analyzing and debugging your application Get FreeRTOS-based applications up and running on an STM32 board Who this book is for This book is for embedded engineers, students, or anyone interested in learning the complete RTOS feature set with embedded devices. A basic understanding of the C programming language and embedded systems or microcontrollers will be helpful.
Download or read book Introduction to Embedded Systems Second Edition written by Edward Ashford Lee and published by MIT Press. This book was released on 2017-01-06 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt: An introduction to the engineering principles of embedded systems, with a focus on modeling, design, and analysis of cyber-physical systems. The most visible use of computers and software is processing information for human consumption. The vast majority of computers in use, however, are much less visible. They run the engine, brakes, seatbelts, airbag, and audio system in your car. They digitally encode your voice and construct a radio signal to send it from your cell phone to a base station. They command robots on a factory floor, power generation in a power plant, processes in a chemical plant, and traffic lights in a city. These less visible computers are called embedded systems, and the software they run is called embedded software. The principal challenges in designing and analyzing embedded systems stem from their interaction with physical processes. This book takes a cyber-physical approach to embedded systems, introducing the engineering concepts underlying embedded systems as a technology and as a subject of study. The focus is on modeling, design, and analysis of cyber-physical systems, which integrate computation, networking, and physical processes. The second edition offers two new chapters, several new exercises, and other improvements. The book can be used as a textbook at the advanced undergraduate or introductory graduate level and as a professional reference for practicing engineers and computer scientists. Readers should have some familiarity with machine structures, computer programming, basic discrete mathematics and algorithms, and signals and systems.
Download or read book Real Time Modelling and Processing for Communication Systems written by Muhammad Alam and published by Springer. This book was released on 2017-12-27 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents cutting-edge work on real-time modelling and processing, a highly active research field in both the research and industrial domains. Going beyond conventional real-time systems, major efforts are required to develop accurate and computational efficient real-time modelling algorithms and design automation tools that reflect the technological advances in high-speed and ultra-low-power transceiver communication architectures based on nanoscale devices. The book addresses basic and more advanced topics, such as I/O buffer circuits for ensuring reliable chip-to-chip communication, I/O buffer behavioural modelling, multiport empirical models for memory interfaces, compact behavioural modelling for memristive devices, and resource reservation modelling for distributed embedded systems. The respective chapters detail new research findings, new models, algorithms, implementations and simulations of the above-mentioned topics. As such, the book will help both graduate students and researchers understand the latest research into real-time modelling and processing.
Download or read book Distributed Real Time Architecture for Mixed Criticality Systems written by Hamidreza Ahmadian and published by CRC Press. This book was released on 2018-09-05 with total page 709 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes a cross-domain architecture and design tools for networked complex systems where application subsystems of different criticality coexist and interact on networked multi-core chips. The architecture leverages multi-core platforms for a hierarchical system perspective of mixed-criticality applications. This system perspective is realized by virtualization to establish security, safety and real-time performance. The impact further includes a reduction of time-to-market, decreased development, deployment and maintenance cost, and the exploitation of the economies of scale through cross-domain components and tools. Describes an end-to-end architecture for hypervisor-level, chip-level, and cluster level. Offers a solution for different types of resources including processors, on-chip communication, off-chip communication, and I/O. Provides a cross-domain approach with examples for wind-power, health-care, and avionics. Introduces hierarchical adaptation strategies for mixed-criticality systems Provides modular verification and certification methods for the seamless integration of mixed-criticality systems. Covers platform technologies, along with a methodology for the development process. Presents an experimental evaluation of technological results in cooperation with industrial partners. The information in this book will be extremely useful to industry leaders who design and manufacture products with distributed embedded systems in mixed-criticality use-cases. It will also benefit suppliers of embedded components or development tools used in this area. As an educational tool, this material can be used to teach students and working professionals in areas including embedded systems, computer networks, system architecture, dependability, real-time systems, and avionics, wind-power and health-care systems.
Download or read book Embedded System Design written by Frank Vahid and published by John Wiley & Sons. This book was released on 2001-10-17 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces a modern approach to embedded system design, presenting software design and hardware design in a unified manner. It covers trends and challenges, introduces the design and use of single-purpose processors ("hardware") and general-purpose processors ("software"), describes memories and buses, illustrates hardware/software tradeoffs using a digital camera example, and discusses advanced computation models, controls systems, chip technologies, and modern design tools. For courses found in EE, CS and other engineering departments.
Download or read book Embedded Systems Architecture written by Tammy Noergaard and published by Newnes. This book was released on 2005 with total page 658 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive textbook provides a broad and in-depth overview of embedded systems architecture for engineering students and embedded systems professionals. The book is well suited for undergraduate embedded systems courses in electronics/electrical engineering and engineering technology (EET) departments in universities and colleges, as well as for corporate training of employees. The book is a readable and practical guide covering embedded hardware, firmware, and applications. It clarifies all concepts with references to current embedded technology as it exists in the industry today, including many diagrams and applicable computer code. Among the topics covered in detail are: · hardware components, including processors, memory, buses, and I/O · system software, including device drivers and operating systems · use of assembly language and high-level languages such as C and Java · interfacing and networking · case studies of real-world embedded designs · applicable standards grouped by system application * Without a doubt the most accessible, comprehensive yet comprehensible book on embedded systems ever written! * Leading companies and universities have been involved in the development of the content * An instant classic!
Download or read book A Journey of Embedded and Cyber Physical Systems written by Jian-Jia Chen and published by Springer Nature. This book was released on 2020-07-30 with total page 181 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Open Access book celebrates Professor Peter Marwedel's outstanding achievements in compilers, embedded systems, and cyber-physical systems. The contributions in the book summarize the content of invited lectures given at the workshop “Embedded Systems” held at the Technical University Dortmund in early July 2019 in honor of Professor Marwedel's seventieth birthday. Provides a comprehensive view from leading researchers with respect to the past, present, and future of the design of embedded and cyber-physical systems; Discusses challenges and (potential) solutions from theoreticians and practitioners on modeling, design, analysis, and optimization for embedded and cyber-physical systems; Includes coverage of model verification, communication, software runtime systems, operating systems and real-time computing.
Download or read book Distributed Embedded Control Systems written by Matjaž Colnaric and published by Springer Science & Business Media. This book was released on 2007-11-21 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: This fascinating new work comes complete with more than 100 illustrations and a detailed practical prototype. It explores the domains encountered when designing a distributed embedded computer control system as an integrated whole. Basic issues about real-time systems and their properties, especially safety, are examined first. Then, system and hardware architectures are dealt with, along with programming issues, embodying desired properties, basic language subsets, object orientation and language support for hardware and software specifications.
Download or read book Memory Architecture Exploration for Programmable Embedded Systems written by Peter Grun and published by Springer Science & Business Media. This book was released on 2003 with total page 139 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a "compiler-in-the-loop" exploration strategy for alternative memory architectures, allowing for effective matching of the target application to the processor-memory architecture. This new approach for memory architecture exploration replaces the traditional black-box view of the memory system. The utility of the approach is illustrated for a set of large, real-life benchmarks. Material is of interest to different groups in the embedded systems-on-chip field, including researchers and students in memory architecture, CAD developers, and system designers. Grun is affiliated with the Center for Embedded Computer Systems, University of California-Irvine. Annotation (c)2003 Book News, Inc., Portland, OR (booknews.com).
Download or read book Real World Multicore Embedded Systems written by Bryon Moyer and published by Newnes. This book was released on 2013-02-27 with total page 646 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Expert Guide gives you the techniques and technologies in embedded multicore to optimally design and implement your embedded system. Written by experts with a solutions focus, this encyclopedic reference gives you an indispensable aid to tackling the day-to-day problems when building and managing multicore embedded systems. Following an embedded system design path from start to finish, our team of experts takes you from architecture, through hardware implementation to software programming and debug. With this book you will learn: • What motivates multicore • The architectural options and tradeoffs; when to use what • How to deal with the unique hardware challenges that multicore presents • How to manage the software infrastructure in a multicore environment • How to write effective multicore programs • How to port legacy code into a multicore system and partition legacy software • How to optimize both the system and software • The particular challenges of debugging multicore hardware and software Examples demonstrating timeless implementation details Proven and practical techniques reflecting the authors’ expertise built from years of experience and key advice on tackling critical issues
Download or read book Embedded System Design with ARM Cortex M Microcontrollers written by Cem Ünsalan and published by Springer Nature. This book was released on 2022-01-03 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook introduces basic and advanced embedded system topics through Arm Cortex M microcontrollers, covering programmable microcontroller usage starting from basic to advanced concepts using the STMicroelectronics Discovery development board. Designed for use in upper-level undergraduate and graduate courses on microcontrollers, microprocessor systems, and embedded systems, the book explores fundamental and advanced topics, real-time operating systems via FreeRTOS and Mbed OS, and then offers a solid grounding in digital signal processing, digital control, and digital image processing concepts — with emphasis placed on the usage of a microcontroller for these advanced topics. The book uses C language, “the” programming language for microcontrollers, C++ language, and MicroPython, which allows Python language usage on a microcontroller. Sample codes and course slides are available for readers and instructors, and a solutions manual is available to instructors. The book will also be an ideal reference for practicing engineers and electronics hobbyists who wish to become familiar with basic and advanced microcontroller concepts.
