Download or read book Mechatronic Control of Distributed Noise and Vibration written by Christopher D. Rahn and published by Springer Science & Business Media. This book was released on 2013-03-14 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vibration and noise reduce the perceived quality, productivity, and efficiency of many and limit production speeds electromechanical systems. Vibration can cause defects during manufacturing and produce premature failure of finished products due to fa tigue. Potential contact with a vibrating system or hearing darnage from a noisy machine can produce a dangerous, unhealthy, and uncomfortable operating environ ment. Recent advances in computer technology have allowed the development of so phisticated electromechanical systems for the control of vibration and noise. The demanding specifications of many modern systems require higher performance than possible with the traditional, purely mechanical approaches of increasing system stiff ness or damping. Mechatronic systems that integrate computer software and hard ware with electromechanical sensors and actuators to control complex mechanical systems have been demonstrated to provide outstanding vibration and noise reduc tion. The current trends toward higher speed computation and lower cost, higher performance sensors and actuators indicate the continuing possibilities for this con trol approach in future applications.

Download or read book Mechatronic Control of Distributed Noise and Vibration written by Christopher D. Rahn and published by . This book was released on 2014-01-15 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Vibration Control Methods of Mechanical Distributed Parameter Systems written by Xueyan Xing and published by Springer Nature. This book was released on 2021-05-18 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book aims at investigating PDE modeling and vibration control of some typical mechanical distributed parameter systems. Several control methods are proposed to realize stabilization of the closed-loop system with the help of mathematical tools and stability analysis methods. Besides, some common engineering problems, such as input and output constraints, are also involved in the control design. This book offers a comprehensive introduction of mechanical distributed parameter systems, including PDE modeling, controller design and stability analysis. The related fundamental mathematical tools and analytical approaches involving in the PDE modeling and controller are also provided, which broadens its reach to readers.

Download or read book Dynamics and Control of Mechanical Systems in Offshore Engineering written by Wei He and published by Springer Science & Business Media. This book was released on 2013-10-02 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dynamics and Control of Mechanical Systems in Offshore Engineering is a comprehensive treatment of marine mechanical systems (MMS) involved in processes of great importance such as oil drilling and mineral recovery. Ranging from nonlinear dynamic modeling and stability analysis of flexible riser systems, through advanced control design for an installation system with a single rigid payload attached by thrusters, to robust adaptive control for mooring systems, it is an authoritative reference on the dynamics and control of MMS. Readers will gain not only a complete picture of MMS at the system level, but also a better understanding of the technical considerations involved and solutions to problems that commonly arise from dealing with them. The text provides: · a complete framework of dynamical analysis and control design for marine mechanical systems; · new results on the dynamical analysis of riser, mooring and installation systems together with a general modeling method for a class of MMS; · a general method and strategy for realizing the control objectives of marine systems with guaranteed stability the effectiveness of which is illustrated by extensive numerical simulation; and · approximation-based control schemes using neural networks for installation of subsea structures with attached thrusters in the presence of time-varying environmental disturbances and parametric uncertainties. Most of the results presented are analytical with repeatable design algorithms with proven closed-loop stability and performance analysis of the proposed controllers is rigorous and detailed. Dynamics and Control of Mechanical Systems in Offshore Engineering is primarily intended for researchers and engineers in the system and control community, but graduate students studying control and marine engineering will also find it a useful resource as will practitioners working on the design, running or maintenance of offshore platforms.

Download or read book Distributed Parameter Modeling and Boundary Control of Flexible Manipulators written by Jinkun Liu and published by Springer. This book was released on 2018-04-16 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book investigates fundamental issues in flexible manipulator systems, including distributed parameter modeling and boundary controller design. It presents theoretical explorations of several fundamental problems concerning the dynamics and control of these systems. By integrating fresh concepts and results to form a systematic approach to control, it also provides a basic theoretical framework. In turn, the book offers a comprehensive treatment of flexible manipulator systems, addressing topics ranging from related distributed parameter modeling and advanced boundary controller design for these systems with input constraint, to active control with output constraint. In brief, the book addresses dynamical analysis and control design for flexible manipulator systems. Though primarily intended for researchers and engineers in the control system and mechanical engineering community, it can also serve as supplemental reading on the modeling and control of flexible manipulator systems at the postgraduate level.

Download or read book PDE Modeling and Boundary Control for Flexible Mechanical System written by Zhijie Liu and published by Springer Nature. This book was released on 2020-03-16 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive review of fundamental issues in the dynamical modeling and vibration control design for several flexible mechanical systems, such as flexible satellites, flexible aerial refueling hoses, and flexible three-dimensional manipulators. Offering an authoritative reference guide to the dynamics and control of flexible mechanical systems, it equips readers to solve a host of problems concerning these systems. It provides not only a complete overview of flexible systems, but also a better understanding of the technical levels involved. The book is divided into ten chapters: Chapters 1 and 2 lay the foundations, while the remaining chapters explore several independent yet related topics in detail. The book’s final chapter presents conclusions and recommendations for future research. Given its scope, the book is intended for researchers, graduate students, and engineers whose work involves control systems, flexible mechanical systems, and related areas.

Download or read book Handbook of Research on Advanced Mechatronic Systems and Intelligent Robotics written by Habib, Maki K. and published by IGI Global. This book was released on 2019-07-26 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced research in the field of mechatronics and robotics represents a unifying interdisciplinary and intelligent engineering science paradigm. It is a holistic, concurrent, and interdisciplinary engineering science that identifies novel possibilities of synergizing and fusing different disciplines. The Handbook of Research on Advanced Mechatronic Systems and Intelligent Robotics is a collection of innovative research on the methods and applications of knowledge in both theoretical and practical skills of intelligent robotics and mechatronics. While highlighting topics including green technology, machine learning, and virtual manufacturing, this book is ideally designed for researchers, students, engineers, and computer practitioners seeking current research on developing innovative ideas for intelligent robotics and autonomous and smart interdisciplinary mechatronic products.

Download or read book Active Vibration Control and Stability Analysis of Flexible Beam Systems written by Wei He and published by Springer. This book was released on 2018-12-17 with total page 199 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents theoretical explorations of several fundamental problems in the dynamics and control of flexible beam systems. By integrating fresh concepts and results to form a systematic approach to control, it establishes a basic theoretical framework. It includes typical control design examples verified using MATLAB simulation, which in turn illustrate the successful practical applications of active vibration control theory for flexible beam systems. The book is primarily intended for researchers and engineers in the control system and mechanical engineering community, offering them a unique resource.

Download or read book Boundary Control of Flexible Three Dimensional Euler Bernoulli Beams written by Ning Ji and published by Springer Nature. This book was released on 2022-03-24 with total page 235 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on vibration suppression of flexible three-dimensional Euler–Bernoulli beams modeled by PDEs. Boundary control strategy and several control methods are proposed to stabilize the closed-loop system. Besides, some common engineering problems such as input constraint and output constraint are also considered in the control scheme design. This book offers a comprehensive introduction of the modeling process, controller design, stability analysis and numerical simulation. The detailed MATLAB codes in each chapter are also provided, which can make readers better understand the control flow of the system. This book is mainly targeted for researchers, senior undergraduate students and postgraduate students in the field of control theory and control engineering.

Download or read book Noise And Vibration Control written by M L Munjal and published by World Scientific. This book was released on 2013-06-07 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vibration and noise are two interrelated terms in the field of mechanical engineering. Vibration is caused by unbalanced inertial forces and moments whereas noise is the result of such vibrations. Noisy machines have always been a matter of concern. Lesser vibration ensures manufacturing to closer tolerances, lesser wear and tear, and longer fatigue life. Hence, a quieter machine is more cost-effective in the long run. It is now well understood that a quieter machine is in every way a better machine.This book deals with such industrial and automotive noise and vibration, their measurement and control. This textbook stresses on physical concepts and the application thereof to practical problems. The author's four decades of experience in teaching, research and industrial consultancy is reflected in the choice of the solved examples and unsolved problems.The book targets senior undergraduate students in mechanical engineering as well as designers of industrial machinery and layouts. It can readily be used for self-study by practicing designers and engineers.

Download or read book Bio inspired computation and its applications written by Tinggui Chen and published by Frontiers Media SA. This book was released on 2023-07-06 with total page 939 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Mechanical Vibration Practice and Noise Control written by V. Ramamurti and published by . This book was released on 2012 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: MECHANICAL VIBRATION PRACTICE AND NOISE CONTROL stresses the importance of physical parameters of significance associated with vibration and industrial noise and lateral and torsional critical speeds of industrial rotors. Design features of metallic and non metallic isolators, machine foundations, International Standards on noise and vibration. Seventeen case studies on industrial problems solved for process industries and engine diagnostics are very useful to a practicing engineer. Presentation of 3 D beam finite element method and two plane field balancing along with source codes in C and FORTRAN languages and over 100 worked out examples on industrial problems make the book versatile. Hints to exercises will be a priceless possession for students, teachers and professional Engineers.

Download or read book Modeling and Control of Vibration in Mechanical Systems written by Chunling Du and published by CRC Press. This book was released on 2018-09-03 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: From the ox carts and pottery wheels the spacecrafts and disk drives, efficiency and quality has always been dependent on the engineer’s ability to anticipate and control the effects of vibration. And while progress in negating the noise, wear, and inefficiency caused by vibration has been made, more is needed. Modeling and Control of Vibration in Mechanical Systems answers the essential needs of practitioners in systems and control with the most comprehensive resource available on the subject. Written as a reference for those working in high precision systems, this uniquely accessible volume: Differentiates between kinds of vibration and their various characteristics and effects Offers a close-up look at mechanical actuation systems that are achieving remarkably high precision positioning performance Includes techniques for rejecting vibrations of different frequency ranges Covers the theoretical developments and principles of control design with detail elaborate enough that readers will be able to apply the techniques with the help of MATLAB® Details a wealth of practical working examples as well as a number of simulation and experimental results with comprehensive evaluations The modern world’s ever-growing spectra of sophisticated engineering systems such as hard disk drives, aeronautic systems, and manufacturing systems have little tolerance for unanticipated vibration of even the slightest magnitude. Accordingly, vibration control continues to draw intensive focus from top control engineers and modelers. This resource demonstrates the remarkable results of that focus to date, and most importantly gives today’s researchers the technology that they need to build upon into the future. Chunling Du is currently researching modeling and advanced servo control of hard disk drives at the Data Storage Institute in Singapore. Lihua Xie is the Director of the Centre for Intelligent Machines and a professor at Nanyang Technological University in Singapore.

Download or read book Vibration with Control written by Daniel J. Inman and published by John Wiley & Sons. This book was released on 2017-01-30 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: An advanced look at vibration analysis with a focus on active vibration suppression As modern devices, from cell phones to airplanes, become lighter and more flexible, vibration suppression and analysis becomes more critical. Vibration with Control, 2nd Edition includes modelling, analysis and testing methods. New topics include metastructures and the use of piezoelectric materials, and numerical methods are also discussed. All material is placed on a firm mathematical footing by introducing concepts from linear algebra (matrix theory) and applied functional analysis when required. Key features: Combines vibration modelling and analysis with active control to provide concepts for effective vibration suppression. Introduces the use of piezoelectric materials for vibration sensing and suppression. Provides a unique blend of practical and theoretical developments. Examines nonlinear as well as linear vibration analysis. Provides Matlab instructions for solving problems. Contains examples and problems. PowerPoint Presentation materials and digital solutions manual available for instructors. Vibration with Control, 2nd Edition is an ideal reference and textbook for graduate students in mechanical, aerospace and structural engineering, as well as researchers and practitioners in the field.

Download or read book Mechanical Vibrations and Industrial Noise Control written by L.G. LASITHAN and published by PHI Learning Pvt. Ltd.. This book was released on 2013-06-05 with total page 649 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designed to serve as a textbook for undergraduate and postgraduate students of Mechanical Engineering, this book helps promote student understanding of complex phenomena of vibration technology. The book through clear and concise writing equips students with skills required to use vibration theory in analysis and design of engineering systems and devices. The book also discusses in an exclusive chapter the detrimental effects of industrial noise on human beings, and suggests measures to control noise. The book explains the basic principles and the fundamental concepts of the vibration theory related to the study of conventional vibration phenomena such as free response, response to harmonic excitation, general forced response, non-linear analysis, self-excited oscillations, random time functions, and torsional vibration. Besides, it discusses the vibration measuring instruments used for testing in various engineering applications. The book features a wealth of excellent worked-out examples of practical applications, and a host of challenging problems at the end of each chapter.

Download or read book Spatial Control of Vibration written by S. O. Reza Moheimani and published by World Scientific. This book was released on 2003 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vibration is a natural phenomenon that occurs in a variety of engineering systems. In many circumstances, vibration greatly affects the nature of engineering design as it often dictates limiting factors in the performance of the system. The conventional treatment is to redesign the system or to use passive damping. The former could be a costly exercise, while the latter is only effective at higher frequencies. Active control techniques have emerged as viable technologies to fill this low-frequency gap. This book is concerned with the study of feedback controllers for vibration control of flexible structures, with a view to minimizing vibration over the entire body of the structure. The book introduces a variety of flexible structures such as beams, strings, and plates with specific boundary conditions, and explains in detail how a spatially distributed model of such systems can be obtained. It addresses the problems of model reduction and model correction for spatially distributed systems of high orders, and goes on to extend robust control techniques such as H-infinity and H 2 control design methodologies to spatially distributed systems arising in active vibration control problems. It also addresses other important topics, such as actuator and sensor placement for flexible systems, and system identification for flexible structures with irregular boundary conditions. The text contains numerous examples, and experimental results obtained from laboratory-level apparatus, with details of how similar test beds may be built. Contents: Modeling; Spatial Norms and Model Reduction; Model Correction; Spatial Control; Optimal Placement of Actuators and Sensors; System Identification for Spatially Distributed Systems. Readership: Graduate students and researchers in mechanical engineering and control theory.

Download or read book Active Control of Noise and Vibration 1992 written by Clark Jeffrey Radcliffe and published by . This book was released on 1992 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: