Download or read book Mechanochemical Synthesis of Composite Materials written by Zulkhair A. Mansurov and published by CRC Press. This book was released on 2022-08-01 with total page 437 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanochemical treatment is one of the promising directions of the chemical and technological processes of obtaining a new substance as a result of the transformation of mechanical energy into the chemical-physical processes of system restructuring. The peculiarity of the state of solid matter because of intense mechanical action is determined not only by its destruction, i.e., dispersing and obtaining a powder material with a high and active surface, but also by the accumulation of defects in the entire volume of particles, which increases their reactivity. This book presents the results of many years of research on the mechanochemical synthesis of composites, consisting of inorganic and organic components, obtained by the scientific team at the Institute of Combustion Problems, Kazakhstan. It begins with the general ideas about the mechanochemical process and the phenomena and further discusses the main provisions of the structural rearrangement and modification of the surface of dispersible particles.

Download or read book Mechanochemical Synthesis of Composite Materials written by Zulkhair A. Mansurov and published by CRC Press. This book was released on 2022-08-01 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanochemical treatment is one of the promising directions of the chemical and technological processes of obtaining a new substance as a result of the transformation of mechanical energy into the chemical-physical processes of system restructuring. The peculiarity of the state of solid matter because of intense mechanical action is determined not only by its destruction, i.e., dispersing and obtaining a powder material with a high and active surface, but also by the accumulation of defects in the entire volume of particles, which increases their reactivity. This book presents the results of many years of research on the mechanochemical synthesis of composites, consisting of inorganic and organic components, obtained by the scientific team at the Institute of Combustion Problems, Kazakhstan. It begins with the general ideas about the mechanochemical process and the phenomena and further discusses the main provisions of the structural rearrangement and modification of the surface of dispersible particles.

Download or read book Ceramic nanocomposites written by K. Wieczorek-Ciurowa and published by Elsevier Inc. Chapters. This book was released on 2013-07-31 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt: The chapter discusses several variants of mechanosyntheses for composite powder formation of metal alloy matrices with ceramic particles. The necessity of following progress in mechanochemical processes using different analytical methods is shown. Based on the results of experimental studies on Cu–Al/Al2O3 and Ni-Al/Al2O3 nanocomposite powder formation through mechanochemical synthesis, the method of transforming combustive processes to progressive ones by applying hydroxosalts instead of metal oxides as precursors of composites is described.

Download or read book High Energy Ball Milling written by Małgorzata Sopicka-Lizer and published by Elsevier. This book was released on 2010-05-24 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanochemical processing is a novel and cost effective method of producing a wide range of nanopowders. It involves the use of a high energy ball mill to initiate chemical reactions and structural changes. High energy ball milling: Mechanochemical processing of nanopowders reviews the latest techniques in mechanochemistry and how they can be applied to the synthesis and processing of various high-tech materials.Part one discusses the basic science of mechanochemistry with chapters on such topics as the mechanism and kinetics of mechanochemical processes, kinetic behaviour in mechanochemically-induced structural and chemical transformations and materials design through mechanochemical processing. Part two reviews mechanochemical treatment of different materials including synthesis of complex ceramic oxides, production of intermetallic compound powders, synthesis of organic compounds, synthesis of metallic-ceramic composite powders and activation of covalent bond-based materials. Part three covers mechanochemical processes in metal powder systems and other applications with coverage of topics such as plating and surface modification using ultrasonic vibrations, activated powders as precursors for spark plasma sintering, titanium dioxide photocatalyst synthesis by mechanochemical doping and synthesis of materials for lithium-ion batteries.With its distinguished editor and international team of contributors, High energy ball milling: Mechanochemical processing of nanopowders is a standard reference for all those involved in the production of ceramic and metallic components using sintering and other powder metallurgy techniques to produce net shape components. Examines the latest techniques in mechanochemistry and how they can be applied to the synthesis and processing of various high-tech materials Discusses the basic science of mechanochemistry including kinetic behaviour, processes and mechanisms and materials design through mechanochemical processing Reviews mechanochemical treatment of different materials including synthesis of ceramic oxides, organic compounds and metallic-ceramic composite powders

Download or read book Synthesis of Inorganic Materials written by Ulrich S. Schubert and published by John Wiley & Sons. This book was released on 2019-08-27 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduces readers to the field of inorganic materials, while emphasizing synthesis and modification techniques Written from the chemist's point of view, this newly updated and completely revised fourth edition of Synthesis of Inorganic Materials provides a thorough and pedagogical introduction to the exciting and fast developing field of inorganic materials and features all of the latest developments. New to this edition is a chapter on self-assembly and self-organization, as well as all-new content on: demixing of glasses, non-classical crystallization, precursor chemistry, citrate-gel and Pechini liquid mix methods, ice-templating, and materials with hierarchical porosity. Synthesis of Inorganic Materials, 4th Edition features chapters covering: solid-state reactions; formation of solids from the gas phase; formation of solids from solutions and melts; preparation and modification of inorganic polymers; self-assembly and self-organization; templated materials; and nanostructured materials. There is also an extensive glossary to help bridge the gap between chemistry, solid state physics and materials science. In addition, a selection of books and review articles is provided at the end of each chapter as a starting point for more in-depth reading. -Gives the students a thorough overview of the fundamentals and the wide variety of different inorganic materials with applications in research as well as in industry -Every chapter is updated with new content -Includes a completely new chapter covering self-assembly and self-organization -Written by well-known and experienced authors who follow an intuitive and pedagogical approach Synthesis of Inorganic Materials, 4th Edition is a valuable resource for advanced undergraduate students as well as masters and graduate students of inorganic chemistry and materials science.

Download or read book Soft Mechanochemical Synthesis written by G.V. Avvakumov and published by Springer Science & Business Media. This book was released on 2007-05-08 with total page 211 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanical methods of the activation of chemical processes are currently widely used for the synthesis of various compounds. The present monograph deals with the development of a novel approach to mechanochemical synthesis based on reactions of solid acids, bases, hydrated compounds, crystal hydrates, basic and acidic salts. This method has been called soft mechanochemical synthesis. The monograph includes the papers published by the present authors. They describe the results of their investigations n the last two decades. New theoretical and experimental data on kinetics and mechanism of soft mechanochemical reactions in the mixtures of compounds mentioned above to give complex oxide compounds are presented. The description of new high energetic and high efficient mills providing effective occurrence of these reactions is delivered. The possibilities of applying soft mechanochemical synthesis for materials used in catalysts, material science, electronics, etc., are discussed. The advantages of the method proposed in comparison with other methods are demonstrated. The monograph is designed for researchers, engineers and technicians engaged in chemical and ceramic industry, for scientists and students specialized in the area of development, and application of new materials.

Download or read book Soft Mechanochemical Synthesis written by G. V. Avvakumov and published by . This book was released on 2001-07 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advances in Nanocomposites written by Boreddy Reddy and published by BoD – Books on Demand. This book was released on 2011-04-19 with total page 984 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Nanocomposites - Synthesis, Characterization and Industrial Applications was conceived as a comprehensive reference volume on various aspects of functional nanocomposites for engineering technologies. The term functional nanocomposites signifies a wide area of polymer/material science and engineering, involving the design, synthesis and study of nanocomposites of increasing structural sophistication and complexity useful for a wide range of chemical, physicochemical and biological/biomedical processes. "Emerging technologies" are also broadly understood to include new technological developments, beginning at the forefront of conventional industrial practices and extending into anticipated and speculative industries of the future. The scope of the present book on nanocomposites and applications extends far beyond emerging technologies. This book presents 40 chapters organized in four parts systematically providing a wealth of new ideas in design, synthesis and study of sophisticated nanocomposite structures.

Download or read book New Frontiers of Nanoparticles and Nanocomposite Materials written by Andreas Öchsner and published by Springer Science & Business Media. This book was released on 2014-07-08 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: The development of nanomaterials opens the possibility for new materials with outstanding properties compared to classical engineering materials. These materials can find applications in different fields such as medical treatment or structural mechanics. This monograph focuses on two major groups of nanomaterials, i.e.nanoparticels and nanocomposites. Nanopartices, for example in the form of hollow particles, allow for new possibilities in drug delivery. Different aspects of nanoparticles ranging from manufacturing to modeling and simulation are covered. Nanocomposite materials are formed by mixing two or more dissimilar materials at the nanoscale in order to control and develop new and improved structures and properties. The properties of nanocomposites depend not only on the individual components used but also on the morphology and the interfacial characteristics. Nanocomposite coatings and materials are one of the most exciting and fastest growing areas of research and novel properties being continuously developed which are previously unknown in the constituent materials. Thus, the second part of this monograph gives an overview on the latest developments in the area of composites and coatings based on nanomaterials.

Download or read book Ceramic Materials for Energy Applications V written by Josef Matyas and published by John Wiley & Sons. This book was released on 2016-01-05 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Ceramic Engineering and Science Proceeding has been published by The American Ceramic Society since 1980. This series contains a collection of papers dealing with issues in both traditional ceramics (i.e., glass, whitewares, refractories, and porcelain enamel) and advanced ceramics. Topics covered in the area of advanced ceramic include bioceramics, nanomaterials, composites, solid oxide fuel cells, mechanical properties and structural design, advanced ceramic coatings, ceramic armor, porous ceramics, and more.

Download or read book Composite Materials written by Amit Sachdeva and published by CRC Press. This book was released on 2021-02-12 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: Composite Materials: Properties, Characterisation, and Applications provides an in-depth description of the synthesis, properties, and various characterisation techniques used for the study of composite materials. Covers applications and simulation tests of these advanced materials Presents real-world examples for demonstration Discusses surface, thermal, and electrical characterisation techniques Covers composites for use as sensors Aimed at industry professionals and researchers, this book offers readers thorough knowledge of the fundamentals as well as advanced level techniques involved in composite material characterisation, development, and applications.

Download or read book Mechanochemistry in Nanoscience and Minerals Engineering written by Peter Balaz and published by Springer Science & Business Media. This book was released on 2008-10-20 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanochemistry as a branch of solid state chemistry enquires into processes which proceed in solids due to the application of mechanical energy. This provides a thorough, up to date overview of mechanochemistry of solids and minerals. Applications of mechanochemistry in nanoscience with special impact on nanogeoscience are described. Selected advanced identification methods, most frequently applied in nanoscience, are described as well as the advantage of mechanochemical approach in minerals engineering. Examples of industrial applications are given. Mechanochemical technology is being applied in many industrial fields: powder metallurgy (synthesis of nanometals, alloys and nanocompounds), building industry (activation of cements), chemical industry (solid waste treatment, catalyst synthesis, coal ashes utilization), minerals engineering (ore enrichment, enhancement of processes of extractive metallurgy), agriculture industry (solubility increase of fertilizers), and pharmaceutical industry (improvement of solubility and bioavailability of drugs). This reference serves as an introduction to newcomers to mechanochemistry, and encourages more experienced researchers to broaden their knowledge and discover novel applications in the field.

Download or read book Mechanochemistry and Emerging Technologies for Sustainable Chemical Manufacturing written by Evelina Colacino and published by CRC Press. This book was released on 2023-07-06 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique volume describes advances in the field of mechanochemistry, in particular the scaling up of mechanochemical processes. Scalable techniques employed to carry out solvent-free synthesis are evaluated. Comparability to continuous flow chemistry, the current industrial benchmark for continuous efficient chemical synthesis, is presented.The book concludes that mechanochemical synthesis can be scaled up into a continuous, sustainable process. It demonstrates that large-scale mechanochemistry can meet industrial demands, especially in the pharmaceutical industry. Features Mechanochemistry is rapidly developing as a multidisciplinary science on the borderline between chemistry, materials science and environmental science. This unique text focuses on mechanochemistry with the ability to scale up and illustrates how mechanochemical synthesis is no longer an obstacle. This timely book highlights recent advancements describing what can be achieved in chemical synthesis. Mechanochemistry enables the synthesis of multiple polymorphic crystalline forms in the production of drugs in the form of tablets or granules in capsules.

Download or read book Hybrid Perovskite Composite Materials written by Imran Khan and published by Woodhead Publishing. This book was released on 2020-10-22 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hybrid Composite Perovskite Materials: Design to Applications discusses the manufacturing, design and characterization of organic-inorganic perovskite composite materials. The book goes beyond the basics of characterization and discusses physical properties, surface morphology and environmental stability. Users will find extensive examples of real-world products that are suitable for the needs of the market. Following a logical order, the book begins with mathematical background and then covers innovative approaches to physical modeling, analysis and design techniques. Numerous examples illustrate the proposed methods and results, making this book a sound resource on the modern research application of perovskite composites with real commercial value. Discusses the composition of perovskite materials and their properties, manufacturing and environmental stability Includes both fundamentals and state-of-the-art developments Features the main types of applications, including solar cells, photovoltaics, sensors and optoelectronic devices

Download or read book Handbook of Ceramics and Composites written by Walter Federer and published by CRC Press. This book was released on 1990-04-09 with total page 668 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is concerned with the structural and physical properties of important classes of composite and ceramic materials of engineering importance, covering synthesis of the materials by casting and solidification routes.

Download or read book Functionalization of 2D Materials and Their Applications written by Waleed A. El-Said and published by Elsevier. This book was released on 2024-06-11 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: Functionalization of 2D Materials and Their Applications reviews the synthesis and characterization of nanopatterned 2D materials and how to modify different substrates with these materials. Each chapter emphasizes fabrication, including the fabrication of different morphologies of graphene and transition metal dichalcogenides (TMDCs), the fabrication of different composites and the surface modification of different nanopatterned graphene and TMDCs, and the effects of these nanostructures on the different properties of the modified substrates, such as the electrical, thermal and optical properties, and more. The applications of graphene and TMDCs in the enhancement of Raman spectroscopy, solar cells, fuel cells, supercapacitors, biosensors, chemical sensors, water treatment, water desalination, perovskite photodetectors, energy storage devices, environmental applications and cell-based chips are also reviewed. Reviews the latest advances in the fabrication of 2D materials, including nanopatterned, composite, and porous 2D materials Explores the functionalization of 2D materials, with particular attention given to the electrical, thermal, and optical properties that make these materials useful for a wide range of applications Discusses the applications of 2D materials in energy, sensing, environmental remediation, and electronics

Download or read book Synthetic Engineering Materials and Nanotechnology written by Ibrahim M. Alarifi and published by Elsevier. This book was released on 2021-10-21 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: Synthetic Engineering Materials and Nanotechnology covers the latest research and developments of synthetic processes, materials, applications and technologies. In addition, innovations in synthetic engineering materials techniques are analyzed. Each chapter addresses key concepts, properties and applications of important categories of synthetic materials, including metals alloys, polymers, composites, rubbers, oils and foams. Advances in nanomaterials produced by synthetic engineering methods are also considered, including ceramic, carbon, metal oxide, composite, and membrane-derived nanomaterials. The primary synthetic engineering materials techniques covered include thermo-mechanical, chemical, physiochemical, electrochemical, bottom-up, hybrid and biological methods. This book is suitable for early career researchers in academia and R&D in areas such as materials science and engineering, mechanical engineering and chemical engineering. Provides the fundamentals on materials produced through synthetic engineering methods, including their properties, experimental and characterization techniques, and applications Reviews the advances of synthetic engineering methods for nanomaterials applications, including electrospinning, atomic layer deposition, ion implantation, bottom-up, hybrid strategies, and more Includes numerous, real-world examples and case studies to apply the fundamental concepts to experiments and real-world applications