Download or read book Magnesium Technology 2020 written by J. Brian Jordon and published by Springer Nature. This book was released on 2020-01-22 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Magnesium Technology Symposium, the event on which this collection is based, is one of the largest yearly gatherings of magnesium specialists in the world. Papers represent all aspects of the field, ranging from primary production to applications to recycling. Moreover, papers explore everything from basic research findings to industrialization. Magnesium Technology 2020 covers a broad spectrum of current topics, including alloys and their properties; cast products and processing; wrought products and processing; forming, joining, and machining; corrosion and surface finishing; and structural applications. In addition, there is coverage of new and emerging applications.
Download or read book An Introduction to Composite Materials written by D. Hull and published by Cambridge University Press. This book was released on 1996-08-13 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edition has been greatly enlarged and updated to provide both scientists and engineers with a clear and comprehensive understanding of composite materials. In describing both theoretical and practical aspects of their production, properties and usage, the book crosses the borders of many disciplines. Topics covered include: fibres, matrices, laminates and interfaces; elastic deformation, stress and strain, strength, fatigue crack propagation and creep resistance; toughness and thermal properties; fatigue and deterioration under environmental conditions; fabrication and applications. Coverage has been increased to include polymeric, metallic and ceramic matrices and reinforcement in the form of long fibres, short fibres and particles. Designed primarily as a teaching text for final-year undergraduates in materials science and engineering, this book will also interest undergraduates and postgraduates in chemistry, physics, and mechanical engineering. In addition, it will be an excellent source book for academic and technological researchers on materials.
Download or read book Structure Property Relations in Nonferrous Metals written by Alan Russell and published by John Wiley & Sons. This book was released on 2005-07-08 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: This junior/senior textbook presents fundamental concepts ofstructure property relations and a description of how theseconcpets apply to every metallic element except iron. Part One of the book describes general concepts of crystalstructure, microstructure and related factors on the mechanical,thermal, magnetic and electronic properties of nonferrous metals,intermetallic compounds and metal matrix composites. Part Two discusses all the nonferrous metallic elements from twoperspectives: First it explains how the concepts presented in PartOne define the properties of a particular metallic element and itsalloys. Second is a description of the major engineering uses ofeach metal. This section features sidebar pieces describingparticular physical property oddities, engineering applications andcase studies. An Instructor's Manual presenting detailed solutionsto all the problems in the book is available from the Wileyeditorial department. An Instructor's Manual presenting detailed solutions to all theproblems in the book is available from the Wiley editorialdepartment.
Download or read book Kinetics of Materials written by Robert W. Balluffi and published by John Wiley & Sons. This book was released on 2005-12-16 with total page 672 pages. Available in PDF, EPUB and Kindle. Book excerpt: A classroom-tested textbook providing a fundamental understandingof basic kinetic processes in materials This textbook, reflecting the hands-on teaching experience of itsthree authors, evolved from Massachusetts Institute of Technology'sfirst-year graduate curriculum in the Department of MaterialsScience and Engineering. It discusses key topics collectivelyrepresenting the basic kinetic processes that cause changes in thesize, shape, composition, and atomistic structure of materials.Readers gain a deeper understanding of these kinetic processes andof the properties and applications of materials. Topics are introduced in a logical order, enabling students todevelop a solid foundation before advancing to more sophisticatedtopics. Kinetics of Materials begins with diffusion, offering adescription of the elementary manner in which atoms and moleculesmove around in solids and liquids. Next, the more complex motion ofdislocations and interfaces is addressed. Finally, still morecomplex kinetic phenomena, such as morphological evolution andphase transformations, are treated. Throughout the textbook, readers are instilled with an appreciationof the subject's analytic foundations and, in many cases, theapproximations commonly used in the field. The authors offer manyextensive derivations of important results to help illuminate theirorigins. While the principal focus is on kinetic phenomena incrystalline materials, select phenomena in noncrystalline materialsare also discussed. In many cases, the principles involved apply toall materials. Exercises with accompanying solutions are provided throughoutKinetics of Materials, enabling readers to put their newfoundknowledge into practice. In addition, bibliographies are offeredwith each chapter, helping readers to investigate specializedtopics in greater detail. Several appendices presenting importantbackground material are also included. With its unique range of topics, progressive structure, andextensive exercises, this classroom-tested textbook provides anenriching learning experience for first-year graduate students.
Download or read book Magnesium Technology 2020 written by and published by . This book was released on 2020 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Magnesium Technology Symposium, the event on which this collection is based, is one of the largest yearly gatherings of magnesium specialists in the world. Papers represent all aspects of the field, ranging from primary production to applications to recycling. Moreover, papers explore everything from basic research findings to industrialization. Magnesium Technology 2020 covers a broad spectrum of current topics, including alloys and their properties; cast products and processing; wrought products and processing; forming, joining, and machining; corrosion and surface finishing; and structural applications. In addition, there is coverage of new and emerging applications.
Download or read book Modern Physical Metallurgy written by R. E. Smallman and published by Elsevier. This book was released on 2013-10-22 with total page 545 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern Physical Metallurgy, Fourth Edition explains the fundamental principles of physical metallurgy and their application, allowing its readers to understand the many important technological phenomena of the field. The book covers topics such as the molecular properties of metals; the different physical methods of metals and alloys; and the structure of alloys. Also covered are topics such as the deformation of metals and alloys; phase transformations; and related processes such as creep, fatigue, fracture, oxidation, and corrosion. The text is recommended for metallurgists, chemists, and engineers who would like to know more about the principles behind metallurgy and its application in different fields.
Download or read book Reactor Core Materials written by and published by . This book was released on 1960 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Magnesium Technology 2012 written by Suveen N. Mathaudhu and published by John Wiley & Sons. This book was released on 2012-05-09 with total page 597 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of a symposium sponsored by the Magnesium Committee of the Light Metals Division of The Minerals, Metals & Materials Society (TMS) Held during TMS 2012 Annual Meeting & Exhibition Orlando, Florida, USA March 11-15,2012
Download or read book Superplasticity written by K. A. Padmanabhan and published by Springer. This book was released on 2018-12-08 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book combines the perspectives of materials science of Superplasticity, on the one hand, and those of design and mechanics, on the other, in order to provide a holistic view of materials, design, mechanics and performance which will lead to useful solutions of societal benefits, in addition to providing great intellectual challenges. After considering the experimental evidence for superplasticity in different classes of materials, the book discusses the physics-based models, along with their advantages and limitations. Then, the analyses for superplastic forming available in the framework of continuum mechanics, finite element analysis and numerical simulations are presented. Finally, the authors highlight some successful industrial applications. This book is recommended as a text book for courses on Superplasticity and as supplementary use for courses on Materials Processing, Manufacturing, High Temperature Deformation, Nanotechnology and Mechanical Behavior of Materials. Persons working in Department of Materials Science and Engineering, Physics, Mechanics, Mechanical Engineering, Aerospace Engineering, Metallurgy, Ceramics and Geo-sciences are likely to find the book to be useful. It is also recommended as a reference source for practicing engineers involved in the design, processing and manufacture of industrial components, which exploit the unique properties associated with superplastic materials.
Download or read book Field Ion Microscopy written by John J. Hren and published by Springer. This book was released on 2013-11-11 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Modern Physical Metallurgy and Materials Engineering written by R. E. Smallman and published by Elsevier. This book was released on 1999-11-22 with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt: For many years, various editions of Smallman's Modern Physical Metallurgy have served throughout the world as a standard undergraduate textbook on metals and alloys. In 1995, it was rewritten and enlarged to encompass the related subject of materials science and engineering and appeared under the title Metals & Materials: Science, Processes, Applications offering a comprehensive amount of a much wider range of engineering materials. Coverage ranged from pure elements to superalloys, from glasses to engineering ceramics, and from everyday plastics to in situ composites, Amongst other favourable reviews, Professor Bhadeshia of Cambridge University commented: "Given the amount of work that has obviously gone into this book and its extensive comments, it is very attractively priced. It is an excellent book to be recommend strongly for purchase by undergraduates in materials-related subjects, who should benefit greatly by owning a text containing so much knowledge."The book now includes new chapters on materials for sports equipment (golf, tennis, bicycles, skiing, etc.) and biomaterials (replacement joints, heart valves, tissue repair, etc.) - two of the most exciting and rewarding areas in current materials research and development. As in its predecessor, numerous examples are given of the ways in which knowledge of the relation between fine structure and properties has made it possible to optimise the service behaviour of traditional engineering materials and to develop completely new and exciting classes of materials. Special consideration is given to the crucial processing stage that enables materials to be produced as marketable commodities. Whilst attempting to produce a useful and relatively concise survey of key materials and their interrelationships, the authors have tried to make the subject accessible to a wide range of readers, to provide insights into specialised methods of examination and to convey the excitement of the atmosphere in which new materials are conceived and developed.
Download or read book Nanostructured Metals and Alloys written by S H Whang and published by Elsevier. This book was released on 2011-03-22 with total page 840 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tensile strength, fatigue strength and ductility are important properties of nanostructured metallic materials, which make them suitable for use in applications where strength or strength-to-weight ratios are important. Nanostructured metals and alloys reviews the latest technologies used for production of these materials, as well as recent advances in research into their structure and mechanical properties.One of the most important issues facing nanostructured metals and alloys is how to produce them. Part one describes the different methods used to process bulk nanostructured metals and alloys, including chapters on severe plastic deformation, mechanical alloying and electrodeposition among others. Part two concentrates on the microstructure and properties of nanostructured metals, with chapters studying deformation structures such as twins, microstructure of ferrous alloys by equal channel angular processing, and characteristic structures of nanostructured metals prepared by plastic deformation. In part three, the mechanical properties of nanostructured metals and alloys are discussed, with chapters on such topics as strengthening mechanisms, nanostructured metals based on molecular dynamics computer simulations, and surface deformation. Part four focuses on existing and developing applications of nanostructured metals and alloys, covering topics such as nanostructured steel for automotives, steel sheet and nanostructured coatings by spraying.With its distinguished editor and international team of contributors, Nanostructured metals and alloys is a standard reference for manufacturers of metal components, as well as those with an academic research interest in metals and materials with enhanced properties.
Download or read book Materials Issues for Generation IV Systems written by Véronique Ghetta and published by Springer Science & Business Media. This book was released on 2008-04-23 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: Global warming, shortage of low-cost oil resources and the increasing demand for energy are currently controlling the world's economic expansion while often opposing desires for sustainable and peaceful development. In this context, atomic energy satisfactorily fulfills the criteria of low carbon gas production and high overall yield. However, in the absence of industrial fast-breeders the use of nuclear fuel is not optimal, and the production of high activity waste materials is at a maximum. These are the principal reasons for the development of a new, fourth generation of nuclear reactors, minimizing the undesirable side-effects of current nuclear energy production technology while increasing yields by increasing operation temperatures and opening the way for the industrial production of hydrogen through the decomposition of water. The construction and use of such reactors is hindered by several factors, including performance limitations of known structural materials, particularly if the life of the projected systems had to extend over the periods necessary to achieve low costs (at least 60 years). This book collects lectures and seminars presented at the homonymous NATO ASI held in autumn 2007 at the Institut d’Etudes Scientifiques in Cargèse, France. The adopted approach aims at improving and coordinating basic knowledge in materials science and engineering with specific areas of condensed matter physics, the physics of particle/matter interaction and of radiation damage. It is our belief that this methodology is crucially conditioning the development and the industrial production of new structural materials capable of coping with the requirements of these future reactors.
Download or read book Advances in Wrought Magnesium Alloys written by Colleen Bettles and published by Elsevier. This book was released on 2012-04-25 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt: This important book summarises the wealth of recent research on our understanding of process-property relationships in wrought magnesium alloys and the way this understanding can be used to develop a new generation of alloys for high-performance applications.After an introductory overview of current developments in wrought magnesium alloys, part one reviews fundamental aspects of deformation behaviour. These chapters are the building blocks for the optimisation of processing steps covered in part two, which discusses casting, extrusion, rolling and forging technologies. The concluding chapters cover applications of wrought magnesium alloys in automotive and biomedical engineering.With its distinguished editors, and drawing on the work of leading experts in the field, Advances in wrought magnesium alloys is a standard reference for those researching, manufacturing and using these alloys. - Summarises recent research on our understanding of process-property relationships in wrought magnesium alloys - Discusses the way this understanding can be used to develop a new generation of alloys for high-performance applications - Reviews casting, extrusion, rolling and forging technologies, fundamental aspects of deformation behaviour, and applications of wrought magnesium alloys in automotive and biomedical engineering
Download or read book Laser Fabrication and Machining of Materials written by Narendra B. Dahotre and published by Springer Science & Business Media. This book was released on 2008-01-25 with total page 565 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the fundamental principles and physical phenomena behind laser-based fabrication and machining processes. It also gives an overview of their existing and potential applications. With laser machining an emerging area in various applications ranging from bulk machining in metal forming to micromachining and microstructuring, this book provides a link between advanced materials and advanced manufacturing techniques. The interdisciplinary approach of this text will help prepare students and researchers for the next generation of manufacturing.
Download or read book Titanium and Titanium Alloys written by Christoph Leyens and published by John Wiley & Sons. This book was released on 2006-03-06 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook is an excellent reference for materials scientists and engineers needing to gain more knowledge about these engineering materials. Following introductory chapters on the fundamental materials properties of titanium, readers will find comprehensive descriptions of the development, processing and properties of modern titanium alloys. There then follows detailed discussion of the applications of titanium and its alloys in aerospace, medicine, energy and automotive technology.
Download or read book Fifty Materials That Make the World written by Ian Baker and published by Springer. This book was released on 2018-06-21 with total page 261 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces materials and how advances in materials result in advances in technology and our daily lives. Each chapter covers a particular material, how the material was discovered or invented, when it was first used, how this material has impacted the world, what makes the material important, how it is used today, and future applications. The list of materials covered in this book includes stone, wood, natural fibers, metals, clay, lead, iron, steel, silicon, glass, rubber, composites, polyethylene, rare earth magnet, and alloys.
