Download or read book Mechanism and Design of Homogeneous Heterobimetallic Early Metal aluminum Alkyl Catalysts for Ethylene Trimerization and Polymerization written by Amir Jabri and published by . This book was released on 2009 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Catalyst Design for Tailor Made Polyolefins written by M. Terano and published by Elsevier. This book was released on 1994-11-01 with total page 437 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent development of olefin polymerization catalysts has caused marked changes in both industrial and academic research. Industrial use of homogeneous metallocene catalysts has already begun in the fields of high density polyethylene and syndiotactic polypropylene. Moreover, important data have been obtained from academic investigations which have proved useful for understanding conventional heterogeneous Ziegler-Natta catalysts. From the industrial viewpoint, however, heterogeneous high-yield catalysts seem to be more important. The present volume contains invited lectures and contributed papers. The following topics are covered: (1) Heterogeneous Catalysts, (2) Metallocene Catalysts and (3) New Trends in the Polyolefin Industry.
Download or read book Metal Catalysts in Olefin Polymerization written by Zhibin Guan and published by Springer Science & Business Media. This book was released on 2009-03-31 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polyolefin is a major industry that is important for our economy and impacts every aspect of our lives. The discovery of new transition metal-based catalysts is one of the driving forces for the further advancement of this field. Whereas the classical heterogeneous Ziegler-Natta catalysts and homogeneous early transition metal metallocene catalysts remain the workhorses of the polyolefin industry, in roughly the last decade, tremendous progress has been made in developing non-metallocene-based olefin polymerization catalysts. Particularly, the discovery of late transition metal-based olefin polymerization catalysts heralds a new era for this field. These late transition metal complexes not only exhibit high activities rivaling their early metal counterparts, but more importantly they offer unique properties for polymer architectural control and copolymerization with polar olefins. In this book, the most recent major breakthroughs in the development of new olefin polymerization catalysts, including early metal metallocene and non-metallocene complexes and late transition metal complexes, are discussed by leading experts. The authors highlight the most important discoveries in catalysts and their applications in designing new polyolefin-based functional materials.
Download or read book Organometallic Catalysts and Olefin Polymerization written by R. Blom and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Catalysis is more art than science", probably all of you have heard and even used this expression. Whether it is true or not, it alludes to the experience that new catalysts are hard to find, and near impossible to predict. Hard work and a lifetime of experience is invaluable. However, a keen mind might give insight into where to search, but not necessarily about where to find the answers. Historically, "quantum leaps" have often arisen from serendipity - we all know the story about the nickel-contaminated reactor that triggered further research towards the first coordination catalyst for ethene polymerization. Taking advan tage of this event, Karl Ziegler became the first chemist to earn both a Nobel prize and a fortune for the same invention. A broken NMR tube helped Walter Kaminsky discover the effect of high concentrations of methylaluminoxanes as co catalysts for metallocenes. When air reacted with the concentrated trim ethyl aluminum solution, sufficient amounts of methylaluminoxanes were formed, and the lazy catalyst dormant in the NMR tube suddenly became sensationally active. Ziegler and Kaminsky were lucky and had the genius needed to take advantage of their luck.
Download or read book Handbook of Transition Metal Polymerization Catalysts written by Ray Hoff and published by John Wiley & Sons. This book was released on 2010-09-16 with total page 599 pages. Available in PDF, EPUB and Kindle. Book excerpt: A one-stop resource for understanding and applying polymerization catalysts An edited volume featuring contributions from leading researchers, the Handbook of Transition Metal Polymerization Catalysts covers the design and synthesis of catalysts, and their applications in synthesis of polymers. Dealing with those polymerization catalysts that afford commercially acceptable yields of polymer with respect to catalyst mass and promising newer catalysts, this practical reference provides polymer and organic chemists with a comprehensive overview of the known methods for developing and applying these important catalysts. With both recent advances and historically important catalysts, the subjects covered in this text include: Metal alkyls and other compounds that function as co-catalysts with a large number of catalysts The varieties of porous silica either necessary or valuable in certain catalyst formulations Catalyst scale-up and commercialization Copper catalysts for olefin polymerization Morphology control Along with the above topics, the Handbook of Transition Metal Polymerization Catalysts provides tables of valuable data to assist in reproducing a synthesis or applying the knowledge to a new problem. Polymerization reactivities, polymer properties, monomer and solvent purity requirements, molecular weights, distribution, and reactivity ratios are also covered. The Handbook of Transition Metal Polymerization Catalysts offers an excellent one-stop resource for understanding and applying polymerization catalysts.
Download or read book Transition Metals and Organometallics as Catalysts for Olefin Polymerization written by Walter Kaminsky and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 443 pages. Available in PDF, EPUB and Kindle. Book excerpt: More than 30 years after the discovery of transition metals and organometal lics as catalysts for olefin polymerization these catalysts did not have lost their fascination. Since 1953 when Karl Ziegler has discovered the catalytic polymerization of ethylene leading to plastically formable polymers which are mechanically stable up to temperatures of about 100°C, synthetic polymers and rubbers have made their way right into private houses. This discovery has been a main impetus for the fast growing production of plastics. The stereoselective poly merization of propylene and other long-chain a-olefins first detected by Giulio Natta leads to an even broadened field of applications. Another enforcing factor were the developments of Standard Oil of Indiana and Phillipps Petroleum Company who engaged in the polymerization of a-olefins supported molybdenum, cobalt and later on chromium catalysts which clearly indicates the wide variety of suitable systems. This kind of research acknowledged merit when in 1963 the Nobel prize of chemistry was awarded to Ziegler and Natta. Although to a great extent there is a technical application for these catalysts, up to now the nature of the active centres and many reaction mechanisms are not completely known.
Download or read book Alkene Polymerization Reactions with Transition Metal Catalysts written by Yury Kissin and published by Elsevier. This book was released on 2008-03-10 with total page 607 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the past 30 years, the field of alkene polymerization over transition metal catalysts underwent several major changes:1. The list of commercial heterogeneous Ziegler-Natta catalysts for the synthesis of polyethylene and stereoregular polyolefins was completely renewed affording an unprecedented degree of control over the polymer structure.2. Research devoted to metallocene and other soluble transition-metal catalysis has vastly expanded and has shifted toward complexes of transition metals with multidentate ligands.3. Recent developments in gel permeation chromatography, temperature-rising fractionation, and crystallization fractionation provided the first reliable information about differences between various active centers in transition-metal catalysts.4. A rapid development of high-resolution 13C NMR spectroscopy resulted in greatly expanded understanding of the chemical and steric features of polyolefins and alkene copolymers. These developments require a new review of all aspects of alkene polymerization reactions with transition-metal catalysts. The first chapter in the book is an introductory text for researchers who are entering the field. It describes the basic principles of polymerization reactions with transition-metal catalysts, the types of catalysts, and commercially manufactured polyolefins. The next chapter addresses the principal issue of alkene polymerization catalysis: the existence of catalyst systems with single and multiple types of active centers. The subsequent chapters are devoted to chemistry and stereochemistry of elemental reaction steps, structures of catalyst precursors and reactions leading to the formation of active centers, kinetics of polymerization reactions, and their mechanisms. The book describes the latest commercial polymerization catalysts for the synthesis of polyethylenes and polypropylene The book provides a detailed description of the multi-center nature of commercial Ziegler-Natta catalysts. The book devotes specialized chapters to the most important aspects of transition metal polymerization catalysts: the reactions leading to the formation of active centers, the chemistry and stereochemistry of elemental polymerization steps, reaction kinetics, and the polymerization mechanism. The book contains an introductory chapter for researchers who are entering the field of polymerization catalysis. It describes the basic principles of polymerization reactions with transition-metal catalysts and the types of commercially manufactured polyolefins and copolymersThe book contains over 2000 references, the most recent up to end of 2006.
Download or read book Metalorganic Catalysts for Synthesis and Polymerization written by Walter Kaminsky and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 674 pages. Available in PDF, EPUB and Kindle. Book excerpt: 45 years after the discovery of transition metals and organometallics as cocatalysts for the polymerization of olefins and for organic synthesis, these compounds have not lost their fascination. The birthday of Karl Ziegler, the great pioneer in this metalorganic catalysis, is now 100 years ago. Polyolefins and polydienes produced by Ziegler-Natta catalysis are the most important plastics and elastomers. New impulses for the polymerization of olefins have been brought about by highly active metallocenes and other single site catalysts. Just by changing the ligands of the organometallic compounds, the structure of the polymers produced can be tailored in a wide manner. In invited lectures and posters, relevant aspects of the metalorganic catalysts for synthesis and polymerization are discussed in this book. This includes mechanism and kinetics, stereochemistry, material properties, and industrial applications.
Download or read book Ziegler Catalysts written by Gerhard Fink and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 509 pages. Available in PDF, EPUB and Kindle. Book excerpt: Forty years after Ziegler's discovery of the "Aufbaureaktion" and low-pressure ethene polymerization, transition metal catalyzed olefin and diolefin polymerization continues to represent one of the most active and exciting areas. Since the 1980s, outstanding scientific innovations and process improvements have revolutionized polyolefin technology and greatly simplified polymerization processes. Well-defined catalyst systems are now at hand and facilitate the understanding of basic reaction mechanisms and correlations between catalyst structures, polymer microstructures, and polymer properties. This book reviews some of the modern approaches in organometallic chemistry, Ziegler-Natta catalysis, polymerization processes, design of novel materials, and the modelling in catalyst and process development.
Download or read book The Selective Oligomerization of Ethylene with Metal organic Frameworks written by Eric Daniel Metzger and published by . This book was released on 2018 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: The benefits of heterogeneous catalysis for industry and the society at large cannot be overstated, with approximately 90% of all industrial catalysis being performed with heterogeneous catalysts. Despite the undeniable operational advantages of heterogeneous catalysts, several large volume industrial processes involved in the production of commodity chemicals remain impenetrable to solid catalysts. Among them are the selective dimerization of ethylene and the selective trimerization of ethylene, which require fine steric and electronic tuning to optimize the production of the desired olefin. In this thesis, I describe the development of new heterogeneous catalysts to address the lack of activity and selectivity found among heterogeneous catalysts for selective ethylene oligomerizations, with an emphasis on developing new metal-organic framework (MOF) catalysts for the selective dimerization of ethylene to 1-butene. The ability to tune the catalytically active site of a solid at the molecular level places MOFs in prime position to answer challenges in heterogeneous catalysis that no other class of solids has been able to address. Chapter 2 of this thesis describes the development of Ni-MFU-4/, a nickel-substituted MOF with excellent activity and selectivity for the dimerization of ethylene to 1-butene. Although the active sites in the MOF are designed to mimic homogeneous Nitrispyrazolylborate dimerization catalysts, the selectivity observed for the solid catalyst is considerably higher than that of the homogeneous system, highlighting the importance of active site isolation in the porous solid. Chapter 3 details a combination of studies utilizing isotopic labeling and mechanistic probes to demonstrate that Ni-MFU-4/ dimerizes ethylene via the Cossee-Arlman mechanism. Chapter 4 reports the preparation of Ni-CFA-1, a related heterogeneous ethylene dimerization catalyst that is far more synthetically accessible than Ni- MFU-4/. Lastly, chapter 5 relays initial results towards the development of MOF-based ethylene trimerization catalysts.
Download or read book Late Transition Metal Polymerization Catalysis written by Bernhard Rieger and published by Wiley-VCH Verlag GmbH. This book was released on 2003 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Even some fifty years after their discovery, transition metals have lost none of their fascination. The use of complex compounds in these elements has not only revolutionized synthesis in the laboratory, but has also led to them playing an important role in many industrial applications. Each year, millions of tons of plastics are produced around the world and, by varying the ligands in the catalytically active compounds, the properties of the resulting polymers can even be tailored for use. For this purpose, sandwich compounds from early transition metals have been common until now, but interest has focused increasingly on the late transition metals. In this book, the world's leading authors from research and industry discuss the latest developments in research into palladium, zinc, iron and nickel catalysis. In so doing, they systematically introduce readers to the basic principles and illustrate how these innovative catalysts can be effectively used for polymerizations. The result is an ideal reference work, invaluable for every organic chemist working in catalysis or polymer research.
Download or read book Polymerization of Ethylene with Supported Early and Late Transition Metal Catalysts written by Yiyoung Choi and published by . This book was released on 2011 with total page 158 pages. Available in PDF, EPUB and Kindle. Book excerpt: Single-site catalysts revolutionized the polyolefin manufacturing industry and research with their ability to make polymers with uniform microstructural properties. Several of these catalysts are currently used commercially to produce commodity and differentiated-commodity resins. The key to their rapid success and industrial implementation resides in the fact that they can be used without major modifications in the polymerization reactors that previously used heterogeneous Ziegler-Natta and Phillips catalysts. Since most of these industrial processes use slurry or gas-phase reactors, soluble single-site catalysts must be supported on adequate carriers that ensure not only high activity, but also the formation of polymer particles with the proper morphology and bulk densities. Metallocene catalysts have been supported on a variety of carriers, but supporting late transition metal catalysts has not been investigated in detail, despite their very interesting properties such as tolerance to polar comonomers and impurities, activity in the absence of MAO, and the formation of short chain branches by the chain walking mechanism. The research work of this PhD thesis intends to fill this gap, by developing supported late transition metal catalysts with high catalyst activities towards ethylene polymerization and good polymer particle morphology.
Download or read book Surface Organometallic Chemistry Molecular Approaches to Surface Catalysis written by Jean-Marie Basset and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface organometallic chemistry is a new field bringing together researchers from organometallic, inorganic, and surface chemistry and catalysis. Topics ranging from reaction mechanisms to catalyst preparation are considered from a molecular basis, according to which the "active site" on a catalyst surface has a supra-molecular character. This. the first book on the subject, is the outcome of a NATO Workshop held in Le Rouret. France, in May. 1986. It is our hope that the following chapters and the concluding summary of recommendations for research may help to provide a definition of surface organometallic chemistry. Besides catalysis. the central theme of the Workshop, four main topics are considered: 1) Reactions of organometallics with surfaces of metal oxides, metals. and zeolites; 2) Molecular models of surfaces, metal oxides, and metals; 3) Molecular approaches to the mechanisms of surface reactions; 4) Synthesis and modification of zeolites and related microporous solids. Most surface organometallic chemistry has been carried out on amorphous high-surf ace-area metal oxides such as silica. alumina. magnesia, and titania. The first chapter. contributed by KNOZINGER. gives a short summary of the structure and reactivity of metal oxide surfaces. Most of our understanding of these surfaces is based on acid base and redox chemistry; this chemistry has developed from X-ray and spectroscopic data, and much has been inferred from the structures and reactivities of adsorbed organic probe molecules. There are major opportunities for extending this understanding by use of well-defined (single crystal) oxide surfaces and organometallic probe molecules.
Download or read book Homogeneous Catalysis written by Sumit Bhaduri and published by John Wiley & Sons. This book was released on 2014-09-08 with total page 291 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the last decade, the area of homogeneous catalysis with transition metal has grown in great scientific interest and technological promise, with research in this area earning three Nobel Prizes and filing thousands of patents relating to metallocene and non-metallocene single site catalysts, asymmetric catalysis, carbon-carbon bond forming metathesis and cross coupling reactions. This text explains these new developments in a unified, cogent, and comprehensible manner while also detailing earlier discoveries and the fundamentals of homogeneous catalysis. Serving as a self-study guide for students and all chemists seeking to gain entry into this field, it can also be used by experienced researchers from both academia and industry for referring to leading state of the art review articles and patents, and also as a quick self-study manual in an area that is outside their immediate expertise. The book features: • Topics including renewable feed stocks (biofuel, glycerol), carbon dioxide based processes (polycarbonates), fluorous solvents, ionic liquid, hydroformylation, polymerization, oxidation, asymmetric catalysis, and more • Basic principles of organometallic chemistry, homogeneous catalysis, and relevant technological issues • Problems and answers, industrial applications (case studies), and examples from proven industrial processes with clear discussions on environmental and techno-commercial issues • Extensive references to cutting edge research with application potential and leading patents • Tables and illustrations to help explain difficult concepts
Download or read book Comprehensive Coordination Chemistry II written by J. A. McCleverty and published by Newnes. This book was released on 2003-12-03 with total page 11845 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive Coordination Chemistry II (CCC II) is the sequel to what has become a classic in the field, Comprehensive Coordination Chemistry, published in 1987. CCC II builds on the first and surveys new developments authoritatively in over 200 newly comissioned chapters, with an emphasis on current trends in biology, materials science and other areas of contemporary scientific interest.
Download or read book Early Main Group Metal Catalysis written by Sjoerd Harder and published by John Wiley & Sons. This book was released on 2020-04-06 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Early Main Group Metal Catalysis gives a comprehensive overview of catalytic reactions in the presence of group 1 and group 2 metals. Chapters are ordered to reaction type, contain educational elements and deal with concepts illustrated by examples that cover the main developments. After a short introduction on polar organometallic chemistry and synthesis of early main group metal complexes, a variety of catalytic reactions are described, e.g. polymerization of alkenes, hydroamination and phosphination reactions, hydrosilylation, hydroboration and hydrogenation catalysis, as well as enantioselective and Lewis-acid catalysis. The book addresses organic chemists and researchers in industry interested in the state-of-the-art and new possibilities of early main group metal catalysis as well as newcomers to the field. Written by a team of leaders in the field, it is a very welcome addition to the area of main group metal chemistry, and to the field of catalysis.
Download or read book Nanostructured Catalysts written by Susannah L. Scott and published by Springer Science & Business Media. This book was released on 2008-04-06 with total page 341 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the recent advent of nanotechnology, research and development in the area of nanostructured materials has gained unprecedented prominence. Novel materials with potentially exciting new applications are being discovered at a much higher rate than ever before. Innovative tools to fabricate, manipulate, characterize and evaluate such materials are being developed and expanded. To keep pace with this extremely rapid growth, it is necessary to take a breath from time to time, to critically assess the current knowledge and provide thoughts for future developments. This book represents one of these moments, as a number of prominent scientists in nanostructured materials join forces to provide insightful reviews of their areas of expertise, thus offering an overall picture of the state-- the art of the field. Nanostructured materials designate an increasing number of materials with designed shapes, surfaces, structures, pore systems, etc. Nanostructured materials with modified surfaces include those whose surfaces have been altered via such techniques as grafting and tethering of organic or organometallic species, or through various deposition procedures including electro, electroless and vapor deposition, or simple adsorption. These materials find important applications in catalysis, separation and environmental remediation. Materials with patterned surfaces, which are essential for the optoelectronics industry, constitute another important class of surface-modified nanostructured materials. Other materials are considered nanostructured because of their composition and internal organization.
