Download or read book Mechanics of Solids and Materials written by Robert Asaro and published by Cambridge University Press. This book was released on 2006-01-16 with total page 888 pages. Available in PDF, EPUB and Kindle. Book excerpt: This 2006 book combines modern and traditional solid mechanics topics in a coherent theoretical framework.

Download or read book Mechanics of Solids written by Carl Ross and published by Routledge. This book was released on 2016-02-05 with total page 1510 pages. Available in PDF, EPUB and Kindle. Book excerpt: An introduction to the fundamental concepts of solid materials and their properties The primary recommended text of the Council of Engineering Institutions for university undergraduates studying the mechanics of solids New chapters covering revisionary mathematics, geometrical properties of symmetrical sections, bending stresses in beams, composites and the finite element method Free electronic resources and web downloads support the material contained within this book Mechanics of Solids provides an introduction to the behaviour of solid materials and their properties, focusing upon the fundamental concepts and principles of statics and stress analysis. Essential reading for first year undergraduates, the mathematics in this book has been kept as straightforward as possible and worked examples are used to reinforce key concepts. Practical stress and strain scenarios are also covered including stress and torsion, elastic failure, buckling, bending, as well as examples of solids such as thin-walled structures, beams, struts and composites. This new edition includes new chapters on revisionary mathematics, geometrical properties of symmetrical sections, bending stresses in beams, composites, the finite element method, and Ross’s computer programs for smartphones, tablets and computers.

Download or read book Applied Mechanics of Solids written by Allan F. Bower and published by CRC Press. This book was released on 2009-10-05 with total page 820 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern computer simulations make stress analysis easy. As they continue to replace classical mathematical methods of analysis, these software programs require users to have a solid understanding of the fundamental principles on which they are based.Develop Intuitive Ability to Identify and Avoid Physically Meaningless PredictionsApplied Mechanics o

Download or read book Mechanics of Solids and Structures Second Edition written by Roger T. Fenner and published by CRC Press. This book was released on 2012-06-12 with total page 707 pages. Available in PDF, EPUB and Kindle. Book excerpt: A popular text in its first edition, Mechanics of Solids and Structures serves as a course text for the senior/graduate (fourth or fifth year) courses/modules in the mechanics of solid/advanced strength of materials, offered in aerospace, civil, engineering science, and mechanical engineering departments. Now, Mechanics of Solid and Structure, Second Edition presents the latest developments in computational methods that have revolutionized the field, while retaining all of the basic principles and foundational information needed for mastering advanced engineering mechanics. Key changes to the second edition include full-color illustrations throughout, web-based computational material, and the addition of a new chapter on the energy methods of structural mechanics. Using authoritative, yet accessible language, the authors explain the construction of expressions for both total potential energy and complementary potential energy associated with structures. They explore how the principles of minimal total potential energy and complementary energy provide the means to obtain governing equations of the structure, as well as a means to determine point forces and displacements with ease using Castigliano’s Theorems I and II. The material presented in this chapter also provides a deeper understanding of the finite element method, the most popular method for solving structural mechanics problems. Integrating computer techniques and programs into the body of the text, all chapters offer exercise problems for further understanding. Several appendices provide examples, answers to select problems, and opportunities for investigation into complementary topics. Listings of computer programs discussed are available on the CRC Press website.

Download or read book Experimental Mechanics of Solids written by Cesar A. Sciammarella and published by John Wiley & Sons. This book was released on 2012-03-26 with total page 769 pages. Available in PDF, EPUB and Kindle. Book excerpt: Experimental solid mechanics is the study of materials to determine their physical properties. This study might include performing a stress analysis or measuring the extent of displacement, shape, strain and stress which a material suffers under controlled conditions. In the last few years there have been remarkable developments in experimental techniques that measure shape, displacement and strains and these sorts of experiments are increasingly conducted using computational techniques. Experimental Mechanics of Solids is a comprehensive introduction to the topics, technologies and methods of experimental mechanics of solids. It begins by establishing the fundamentals of continuum mechanics, explaining key areas such as the equations used, stresses and strains, and two and three dimensional problems. Having laid down the foundations of the topic, the book then moves on to look at specific techniques and technologies with emphasis on the most recent developments such as optics and image processing. Most of the current computational methods, as well as practical ones, are included to ensure that the book provides information essential to the reader in practical or research applications. Key features: Presents widely used and accepted methodologies that are based on research and development work of the lead author Systematically works through the topics and theories of experimental mechanics including detailed treatments of the Moire, Speckle and holographic optical methods Includes illustrations and diagrams to illuminate the topic clearly for the reader Provides a comprehensive introduction to the topic, and also acts as a quick reference guide This comprehensive book forms an invaluable resource for graduate students and is also a point of reference for researchers and practitioners in structural and materials engineering.

Download or read book Fundamentals of the Mechanics of Solids written by Paolo Maria Mariano and published by Birkhäuser. This book was released on 2015-11-30 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: This distinctive textbook aims to introduce readers to the basic structures of the mechanics of deformable bodies, with a special emphasis on the description of the elastic behavior of simple materials and structures composed by elastic beams. The authors take a deductive rather than inductive approach and start from a few first, foundational principles. A wide selection of exercises, many with hints and solutions, are provided throughout and organized in a way that will allow readers to form a link between abstract mathematical concepts and real-world applications. The text begins with the definition of bodies and deformations, keeping the kinematics of rigid bodies as a special case; the authors also distinguish between material and spatial metrics, defining each one in the pertinent space. Subsequent chapters cover observers and classes of possible changes; forces, torques, and related balances, which are derived from the invariance under classical changes in observers of the power of the external actions over a body, rather than postulated a priori; constitutive structures; variational principles in linear elasticity; the de Saint-Venant problem; yield criteria and a discussion of their role in the representation of material behavior; and an overview of some bifurcation phenomena, focusing on the Euler rod. An appendix on tensor algebra and tensor calculus is included for readers who need a brief refresher on these topics. Fundamentals of the Mechanics of Solids is primarily intended for graduate and advanced undergraduate students in various fields of engineering and applied mathematics. Prerequisites include basic courses in calculus, mathematical analysis, and classical mechanics.

Download or read book Mechanics of Solids and Shells written by Gerald Wempner and published by CRC Press. This book was released on 2002-10-29 with total page 534 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the theories and methods have evolved over the years, the mechanics of solid bodies has become unduly fragmented. Most books focus on specific aspects, such as the theories of elasticity or plasticity, the theories of shells, or the mechanics of materials. While a narrow focus serves immediate purposes, much is achieved by establishing the common foundations and providing a unified perspective of the discipline as a whole. Mechanics of Solids and Shells accomplishes these objectives. By emphasizing the underlying assumptions and the approximations that lead to the mathematical formulations, it offers a practical, unified presentation of the foundations of the mechanics of solids, the behavior of deformable bodies and thin shells, and the properties of finite elements. The initial chapters present the fundamental kinematics, dynamics, energetics, and behavior of materials that build the foundation for all of the subsequent developments. These are presented in full generality without the usual restrictions on the deformation. The general principles of work and energy form the basis for the consistent theories of shells and the approximations by finite elements. The final chapter views the latter as a means of approximation and builds a bridge between the mechanics of the continuum and the discrete assembly. Expressly written for engineers, Mechanics of Solids and Shells forms a reliable source for the tools of analysis and approximation. Its constructive presentation clearly reveals the origins, assumptions, and limitations of the methods described and provides a firm, practical basis for the use of those methods.

Download or read book An Introduction to the Mechanics of Solids written by Stephen H. Crandall and published by . This book was released on 1978-01-01 with total page 628 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Continuum Mechanics of Solids written by Lallit Anand and published by Oxford University Press. This book was released on 2020-07-21 with total page 722 pages. Available in PDF, EPUB and Kindle. Book excerpt: Continuum Mechanics of Solids is an introductory text for graduate students in the many branches of engineering, covering the basics of kinematics, equilibrium, and material response. As an introductory book, most of the emphasis is upon the kinematically linear theories of elasticity, plasticity, and viscoelasticity, with two additional chapters devoted to topics in finite elasticity. Further chapters cover topics in fracture and fatigue and coupled field problems, such as thermoelasticity, chemoelasticity, poroelasticity, and piezoelectricity. There is ample material for a two semester course, or by selecting only topics of interest for a one-semester offering. The text includes numerous examples to aid the student. A companion text with over 180 fully worked problems is also available.

Download or read book Introduction to Solid Mechanics written by Jacob Lubliner and published by Springer. This book was released on 2016-10-12 with total page 533 pages. Available in PDF, EPUB and Kindle. Book excerpt: This expanded second edition presents in one text the concepts and processes covered in statics and mechanics of materials curricula following a systematic, topically integrated approach. Building on the novel pedagogy of fusing concepts covered in traditional undergraduate courses in rigid-body statics and deformable body mechanics, rather than simply grafting them together, this new edition develops further the authors’ very original treatment of solid mechanics with additional figures, an elaboration on selected solved problems, and additional text as well as a new subsection on viscoelasticity in response to students’ feedback. Introduction to Solid Mechanics: An Integrated Approach, Second Edition, offers a holistic treatment of the depth and breadth of solid mechanics and the inter-relationships of its underlying concepts. Proceeding from first principles to applications, the book stands as a whole greater than the sum of its parts.

Download or read book Nonlinear Continuum Mechanics of Solids written by Yavuz Basar and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 201 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of the book is the presentation of the fundamental mathematical and physical concepts of continuum mechanics of solids in a unified description so as to bring young researchers rapidly close to their research area. Accordingly, emphasis is given to concepts of permanent interest, and details of minor importance are omitted. The formulation is achieved systematically in absolute tensor notation, which is almost exclusively used in modern literature. This mathematical tool is presented such that study of the book is possible without permanent reference to other works.

Download or read book Mechanics of Solids and Fluids written by Franz Ziegler and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 750 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a unified presentation of the concepts and most of the practicable principles common to all branches of solid and fluid should be appealing to advanced undergraduate mechanics. Its design students in engineering science and should also enhance the insight of both graduate students and practitioners. A profound knowledge of applied mechanics as understood in this book may help to cultivate the versatility that the engineering community must possess in this modern world of high-technology. This book is, in fact, a reviewed and extensively improved second edition, but it can also be regarded as the first edition in English, translated by the author himself from the original German version, "Technische Mechanik der festen und flOssigen Korper," published by Springer-Verlag, Wien, in 1985. Although this book grew out of lecture notes for a three semester course for advanced undergraduate students taught by the author and several colleagues during the past 20 years, it contains sufficient material for a subsequent two-semester graduate course. The only prerequisites are basic algebra and analysis as usually taught in the first year of an undergraduate engineering curriculum. Advanced mathematics as it is required in the progress of mechanics teaching may be taught in parallel classes, but also an introduction into the art of design should be offered at that stage.

Download or read book Mechanics of Solids written by Roger T. Fenner and published by CRC Press. This book was released on 1991-03-31 with total page 652 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanics of Solids emphasizes the development of analysis techniques from basic principles for a broad range of practical problems, including simple structures, pressure vessels, beams and shafts. Increased use of personal computers has revolutionized the way in which engineering problems are being solved and this is reflected in the way subjects such as mechanics of solids are taught. A unique feature of this book is the integration of numerical and computer techniques and programs for carrying out analyses, facilitating design, and solving the problems found at the end of each chapter. However, the underlying theory and traditional manual solution methods cannot be ignored and are presented prior to the introduction of computer techniques All programs featured in the book are in FORTRAN 77-the language most widely used by engineers and most portable between computers. All of the programs are suitable for PCs, minicomputers, or mainframes and are available on disk. Another important feature of this book is its use of both traditional and SI units. Many examples through the text are worked in both sets of units. The data and results for every example are also shown in both types of units. Mechanics of Solids is intended for use in a first course in mechanics of solids offered to undergraduates. An Instructor's Manual containing solutions to every problem in the book is available.

Download or read book Mechanics of Solid Materials written by Jean Lemaitre and published by Cambridge University Press. This book was released on 1994-08-25 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt: Translation of hugely successful book aimed at advanced undergraduates, graduate students and researchers.

Download or read book Advanced Mechanics of Solids written by Lester W. Schmerr and published by Cambridge University Press. This book was released on 2021-02-18 with total page 581 pages. Available in PDF, EPUB and Kindle. Book excerpt: Build on elementary mechanics of materials texts with this treatment of the analysis of stresses and strains in elastic bodies.

Download or read book Mathematical Methods in Continuum Mechanics of Solids written by Martin Kružík and published by Springer. This book was released on 2019-03-02 with total page 617 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book primarily focuses on rigorous mathematical formulation and treatment of static problems arising in continuum mechanics of solids at large or small strains, as well as their various evolutionary variants, including thermodynamics. As such, the theory of boundary- or initial-boundary-value problems for linear or quasilinear elliptic, parabolic or hyperbolic partial differential equations is the main underlying mathematical tool, along with the calculus of variations. Modern concepts of these disciplines as weak solutions, polyconvexity, quasiconvexity, nonsimple materials, materials with various rheologies or with internal variables are exploited. This book is accompanied by exercises with solutions, and appendices briefly presenting the basic mathematical concepts and results needed. It serves as an advanced resource and introductory scientific monograph for undergraduate or PhD students in programs such as mathematical modeling, applied mathematics, computational continuum physics and engineering, as well as for professionals working in these fields.

Download or read book MECHANICS OF SOLIDS written by ARBIND KUMAR SINGH and published by PHI Learning Pvt. Ltd.. This book was released on 2007-07-16 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designed as a text for both the undergraduate and postgraduate students of civil, mechanical, aerospace, and marine engineering, this book provides an indepth analysis of the fundamental principles of mechanics of deformable solids based on the phenomenological approach. The book starts with linear and angular momentum principles for a body. It introduces the concepts of stress, strain and the constitutive relations using tensors. Then it goes on to give a description of the laws of thermodynamics as a restriction on constitutive relations and formulates the boundary value problem in elasticity. Besides, the text treats bar under axial, bending and torsional deformation as well as plane stress and plane strain idealizations. The book concludes with a discussion on variational mechanics and the theory of plasticity. DISTINGUISHING FEATURES l Elaborate treatment of constitutive relations for linear elasticity. l Consistent formulation of strength of materials approach and three-dimensional elasticity for bar under axial, bending and torsional deformation. l Presentation of failure criteria and plasticity theory taking the modern developments into account.  Large number of worked-out examples throughout the text and exercises at the end of each chapter.