Download or read book Mechanics of Periodically Heterogeneous Structures written by L.I. Manevitch and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rigorous presentation of Mathematical Homogenization Theory is the subject of numerous publications. This book, however, is intended to fill the gap in the analytical and numerical performance of the corresponding asymptotic analysis of the static and dynamic behaviors of heterogenous systems. Numerous concrete applications to composite media, heterogeneous plates and shells are considered. A lot of details, numerical results for cell problem solutions, calculations of high-order terms of asymptotic expansions, boundary layer analysis etc., are included.
Download or read book Micromechanics of Heterogeneous Materials written by Valeriy Buryachenko and published by Springer Science & Business Media. This book was released on 2007-09-20 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt: Here is an accurate and timely account of micromechanics, which spans materials science, mechanical engineering, applied mathematics, technical physics, geophysics, and biology. The book features rigorous and unified theoretical methods of applied mathematics and statistical physics in the material science of microheterogeneous media. Uniquely, it offers a useful demonstration of the systematic and fundamental research of the microstructure of the wide class of heterogeneous materials of natural and synthetic nature.
Download or read book Nonlinear Mechanics for Composite Heterogeneous Structures written by Georgios A. Drosopoulos and published by CRC Press. This book was released on 2022-04-26 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nonlinear Mechanics for Composite Heterogeneous Structures applies both classical and multi-scale finite element analysis to the non-linear, failure response of composite structures. These traditional and modern computational approaches are holistically presented, providing insight into a range of non-linear structural analysis problems. The classical methods include geometric and material non-linearity, plasticity, damage and contact mechanics. The cutting-edge formulations include cohesive zone models, the Extended Finite Element Method (XFEM), multi-scale computational homogenization, localization of damage, neural networks and data-driven techniques. This presentation is simple but efficient, enabling the reader to understand, select and apply appropriate methods through programming code or commercial finite element software. The book is suitable for undergraduate studies as a final year textbook and for MSc and PhD studies in structural, mechanical, aerospace engineering and material science, among others. Professionals in these fields will also be strongly benefited. An accompanying website provides MATLAB codes for two-dimensional finite element problems with contact, multi-scale (FE2) and non-linear XFEM analysis, data-driven and machine learning simulations.
Download or read book Vibrations of mechanical systems with regular structure written by Ludmilla Banakh and published by Springer Science & Business Media. This book was released on 2010-08-05 with total page 249 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book, regular structures are de ned as periodic structures consisting of repeated elements (translational symmetry) as well as structures with a geom- ric symmetry. Regular structures have for a long time been attracting the attention of scientists by the extraordinary beauty of their forms. They have been studied in many areas of science: chemistry, physics, biology, etc. Systems with geometric symmetry are used widely in many areas of engineering. The various kinds of bases under machines, cyclically repeated forms of stators, reduction gears, rotors with blades mounted on them, etc. represent regular structures. The study of real-life engineering structures faces considerable dif culties because they comprise a great number of working mechanisms that, in turn, consist of many different elastic subsystems and elements. The computational models of such systems represent a hierarchical structure and contain hundreds and thousands of parameters. The main problems in the analysis of such systems are the dim- sion reduction of model and revealing the dominant parameters that determine its dynamics and form its energy nucleus. The two most widely used approaches to the simulation of such systems are as follows: 1. Methods using lumped parameters models, i.e., a discretization of the original system and its representation as a system with lumped parameters [including nite-element method (FEM)]. 2. The use of idealized elements with distributed parameters and known analytical solutions for both the local elements and the subsystems.
Download or read book Heterogeneity in the Crust and Upper Mantle written by John A. Goff and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: Most of our knowledge about the physical structure and the chemical composition of the Earth's deep interior is inferred from seismic data. The interpretation of seismic waves generally follows the assumption that the Earth's physical structure is grossly layered and that fluctuations of the physical parameters within individual layers are smooth in structure and small in magnitude. While this view greatly facilitates the analytic and interpretative procedure, it is clearly at odds with evidence from outcrops and boreholes, which indicates that compositional, structural and petrophysical heterogeneity in the Earth prevails over a wide range of scales. This book is the first to unify three different views of crustal and upper mantle heterogeneity. It brings together the geological view, which is derived from the analysis of crustal exposures and deep boreholes; the stochastic view, which attempts to find order and structure in these seemingly chaotic data; and the seismological view, which considers the end product of the complex interaction of seismic energy with the heterogeneous structure at depth. John Goff and Klaus Holliger have compiled chapters that explore and quantify the relationship between geological and petrophysical heterogeneity and its seismic response, and use seismic data to probe the fabric of the Earth's interior. Geologists, geostaticians, and geophysicists alike will benefit from the integrative perspective presented in Heterogeneity in the Crust and Upper Mantle: Nature, Scaling, and Seismic Properties, making this text an unparalleled reference for professionals and students in Earth science fields.
Download or read book Random Heterogeneous Materials written by Salvatore Torquato and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 720 pages. Available in PDF, EPUB and Kindle. Book excerpt: This accessible text presents a unified approach of treating the microstructure and effective properties of heterogeneous media. Part I deals with the quantitative characterization of the microstructure of heterogeneous via theoretical methods; Part II treats a wide variety of effective properties of heterogeneous materials and how they are linked to the microstructure, accomplished by using rigorous methods.
Download or read book Modeling of Creep for Structural Analysis written by Konstantin Naumenko and published by Springer Science & Business Media. This book was released on 2007-04-06 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book develops methods to simulate and analyze the time-dependent changes of stress and strain states in engineering structures up to the critical stage of creep rupture. The objective of this book is to review some of the classical and recently proposed approaches to the modeling of creep for structural analysis applications. It also aims to extend the collection of available solutions of creep problems by new, more sophisticated examples.
Download or read book Topology Optimization Design of Heterogeneous Materials and Structures written by Daicong Da and published by John Wiley & Sons. This book was released on 2020-02-26 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book pursues optimal design from the perspective of mechanical properties and resistance to failure caused by cracks and fatigue. The book abandons the scale separation hypothesis and takes up phase-field modeling, which is at the cutting edge of research and is of high industrial and practical relevance. Part 1 starts by testing the limits of the homogenization-based approach when the size of the representative volume element is non-negligible compared to the structure. The book then introduces a non-local homogenization scheme to take into account the strain gradient effects. Using a phase field method, Part 2 offers three significant contributions concerning optimal placement of the inclusion phases. Respectively, these contributions take into account fractures in quasi-brittle materials, interface cracks and periodic composites. The topology optimization proposed has significantly increased the fracture resistance of the composites studied.
Download or read book Applied Impact Mechanics written by C. Lakshmana Rao and published by John Wiley & Sons. This book was released on 2016-06-13 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended to help the reader understand impact phenomena as a focused application of diverse topics such as rigid body dynamics, structural dynamics, contact and continuum mechanics, shock and vibration, wave propagation and material modelling. It emphasizes the need for a proper assessment of sophisticated experimental/computational tools promoted widely in contemporary design. A unique feature of the book is its presentation of several examples and exercises to aid further understanding of the physics and mathematics of impact process from first principles, in a way that is simple to follow.
Download or read book Mechanics of non holonomic systems written by Sh.Kh Soltakhanov and published by Springer Science & Business Media. This book was released on 2009-05-27 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: A general approach to the derivation of equations of motion of as holonomic, as nonholonomic systems with the constraints of any order is suggested. The system of equations of motion in the generalized coordinates is regarded as a one vector relation, represented in a space tangential to a manifold of all possible positions of system at given instant. The tangential space is partitioned by the equations of constraints into two orthogonal subspaces. In one of them for the constraints up to the second order, the motion low is given by the equations of constraints and in the other one for ideal constraints, it is described by the vector equation without reactions of connections. In the whole space the motion low involves Lagrangian multipliers. It is shown that for the holonomic and nonholonomic constraints up to the second order, these multipliers can be found as the function of time, positions of system, and its velocities. The application of Lagrangian multipliers for holonomic systems permits us to construct a new method for determining the eigenfrequencies and eigenforms of oscillations of elastic systems and also to suggest a special form of equations for describing the system of motion of rigid bodies. The nonholonomic constraints, the order of which is greater than two, are regarded as programming constraints such that their validity is provided due to the existence of generalized control forces, which are determined as the functions of time. The closed system of differential equations, which makes it possible to find as these control forces, as the generalized Lagrange coordinates, is compound. The theory suggested is illustrated by the examples of a spacecraft motion. The book is primarily addressed to specialists in analytic mechanics.
Download or read book Approximate Models of Mechanics of Composites written by Igor V. Andrianov and published by CRC Press. This book was released on 2023-06-20 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: 1) Provides analytical solutions based on a three-phase model for composites of various structures 2) Identifies computational models to solve problems within all applications of composite materials 3) Constructs higher approximations of the Maxwell formula 4) Proposes efficient analytical algorithms ensuring reliable computational analysis
Download or read book Shell Structures Theory and Applications written by Wojciech Pietraszkiewicz and published by CRC Press. This book was released on 2005-09-22 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt: Shells are basic structural elements of modern technology. Examples of shell structures include automobile bodies, domes, water and oil tanks, pipelines, ship hulls, aircraft fuselages, turbine blades, laudspeaker cones, but also balloons, parachutes, biological membranes, a human skin, a bottle of wine or a beer can. This volume contains full texts of over 100 papers presented by specialists from over 20 countries at the 8th Conference "Shell Structures: Theory and Applications", 12-14 October, 2005 in Jurata (Poland). The aim of the meeting was to bring together scientists, designers, engineers and other specialists in shell structures in order to discuss important results and new ideas in this field. The goal is to pursue more accurate theoretical models, to develop more powerful and versatile methods of analysis, and to disseminate expertise in design and maintenance of shell structures. Among the authors there are many distinguished specialists of shell structures, including the authors of general lectures: I.V. Andrianov (Ukraine), V.A. Eremeyev (Russia), A. Ibrahimbegovic (France), P. Klosowski (Poland), B.H. Kröplin (Germany), E. Ramm (Germany), J.M. Rotter (UK) and D. Steigmann (USA). The subject area of the papers covers various theoretical models and numerical analyses of strength, dynamics, stability, optimization etc. of different types of shell structures, their design and maintenance, as well as modelling of some surface-related mechanical phenomena.
Download or read book Numerical Structural Analysis written by Anatoly Perelmuter and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 519 pages. Available in PDF, EPUB and Kindle. Book excerpt: To our sons, Mike, Andrew, Alex, who did not inherit their fathers' level of interest in applied mechanics, but who became sophisticated in software development and in this regard surpassed their parents. A.P., V.S. Hard times came, the god5 got angry. Children do not behave themselves and everybody wishes to write a book. Ancient Babylonian inscription X Preface Preface to the English Edition The book you are reading is a translation from Russian into English. Within a pretty short term this book saw two editions in Russian. The authors received in spiring responses from readers that both stimulated our continuing and improving this work and made sure it would not be in vain of us to try to multiply our readers by covering the English-speaking engineering community. When we prepared the present edition, we took into account interests of the Western readers, so we had to make some changes to our text published earlier. These changes include the following aspects. First, we excluded a lot of references and discussions regarding Russian engi neering codes. It seems to us those are of no real interest for Western engineers oriented at Eurocode or national construction design regulations.
Download or read book Advances in Heterogeneous Material Mechanics 2011 written by Jinghong Fan and published by DEStech Publications, Inc. This book was released on 2011 with total page 1205 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Asymptotic Methods in the Theory of Plates with Mixed Boundary Conditions written by Igor Andrianov and published by John Wiley & Sons. This book was released on 2014-02-06 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: Asymptotic Methods in the Theory of Plates with Mixed Boundary Conditions comprehensively covers the theoretical background of asymptotic approaches and their use in solving mechanical engineering-oriented problems of structural members, primarily plates (statics and dynamics) with mixed boundary conditions. The first part of this book introduces the theory and application of asymptotic methods and includes a series of approaches that have been omitted or not rigorously treated in the existing literature. These lesser known approaches include the method of summation and construction of the asymptotically equivalent functions, methods of small and large delta, and the homotopy perturbations method. The second part of the book contains original results devoted to the solution of the mixed problems of the theory of plates, including statics, dynamics and stability of the studied objects. In addition, the applicability of the approaches presented to other related linear or nonlinear problems is addressed. Key features: • Includes analytical solving of mixed boundary value problems • Introduces modern asymptotic and summation procedures • Presents asymptotic approaches for nonlinear dynamics of rods, beams and plates • Covers statics, dynamics and stability of plates with mixed boundary conditions • Explains links between the Adomian and homotopy perturbation approaches Asymptotic Methods in the Theory of Plates with Mixed Boundary Conditions is a comprehensive reference for researchers and practitioners working in the field of Mechanics of Solids and Mechanical Engineering, and is also a valuable resource for graduate and postgraduate students from Civil and Mechanical Engineering.
Download or read book Computational Mechanics of Composite Materials written by Marcin Marek Kaminski and published by Springer Science & Business Media. This book was released on 2006-03-30 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computational Mechanics of Composite Materials lays stress on the advantages of combining theoretical advancements in applied mathematics and mechanics with the probabilistic approach to experimental data in meeting the practical needs of engineers. Features: Programs for the probabilistic homogenisation of composite structures with finite numbers of components allow composites to be treated as homogeneous materials with simpler behaviours. Treatment of defects in the interfaces within heterogeneous materials and those arising in composite objects as a whole by stochastic modelling. New models for the reliability of composite structures. Novel numerical algorithms for effective Monte-Carlo simulation. Computational Mechanics of Composite Materials will be of interest to academic and practising civil, mechanical, electronic and aerospatial engineers, to materials scientists and to applied mathematicians requiring accurate and usable models of the behaviour of composite materials.
Download or read book Design and Modeling of Mechanical Systems III written by Mohamed Haddar and published by Springer. This book was released on 2017-11-25 with total page 1262 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a collection of original peer-reviewed contributions presented at the 7th International Congress on Design and Modeling of Mechanical Systems (CMSM’2017), held in Hammamet, Tunisia, from the 27th to the 29th of March 2017. It reports on both research findings, innovative industrial applications and case studies concerning mechanical systems and related to modeling and analysis of materials and structures, multiphysics methods, nonlinear dynamics, fluid structure interaction and vibroacoustics, design and manufacturing engineering. Continuing on the tradition of the previous editions, this proceedings offers a broad overview on the state-of-the art in the field and a useful resource for academic and industry specialists active in the field of design and modeling of mechanical systems. CMSM’2017 was jointly organized by two leading Tunisian research laboratories: the Mechanical, Modeling and Manufacturing Laboratory of the National Engineering School of Sfax and the Mechanical Engineering Laboratory of the National Engineering School of Monastir..
