Download or read book Mechanics of Geomaterial Interfaces written by A.P.S. Selvadurai and published by Elsevier. This book was released on 1995-01-30 with total page 550 pages. Available in PDF, EPUB and Kindle. Book excerpt: The subject of geomaterial interfaces recognizes the important influences of the interface behaviour on the performance of interfaces involving cementaceous materials such as concrete and steel, ice-structure interfaces, concrete-rock interfaces and interfaces encountered in soil reinforcement. During the past two decades, the subject of geomaterial interfaces has attracted the concerted attention of scientists and engineers both in geomechanics and applied mechanics. These efforts have been largely due to the observation that the conventional idealizations of the behaviour of interfaces between materials by frictionless contact, bonded contact, Coulomb friction or finite friction tend to omit many interesting and important influences of special relevance to geomaterials. The significant manner in which non-linear effects, dilatancy, contact degradation, hardening and softening, etc., can influence the behaviour of the interface is borne out by experimental evidence. As a result, in many instances, the response of the interface can be the governing criterion in the performance of a geomechanics problem. The primary objective of this volume is to provide a documentation of recent advances in the area of geomaterial interfaces. The volume consists of subject groupings which cover ice-structure, soil-structure and steel-concrete interfaces, mechanics of rock and concrete joints and interfaces in discrete systems.

Download or read book Recent Developments of Soil Mechanics and Geotechnics in Theory and Practice written by Theodoros Triantafyllidis and published by Springer Nature. This book was released on 2019-08-20 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides essential insights into recent developments in fundamental geotechnical engineering research. Special emphasis is given to a new family of constitutive soil description methods, which take into account the recent loading history and the dilatancy effects. Particular attention is also paid to the numerical implementation of multi-phase material under dynamic loads, and to geotechnical installation processes. In turn, the book addresses implementation problems concerning large deformations in soils during piling operations or densification processes, and discusses the limitations of the respective methods. Numerical simulations of dynamic consolidation processes are presented in slope stability analysis under seismic excitation. Lastly, achieving the energy transition from conventional to renewable sources will call for geotechnical expertise. Consequently, the book explores and analyzes a selection of interesting problems involving the stability and serviceability of supporting structures, and provides new solutions approaches for practitioners and scientists in geotechnical engineering. The content reflects the outcomes of the Colloquium on Geotechnical Engineering 2019 (Geotechnik Kolloquium), held in Karlsruhe, Germany in September 2019.

Download or read book Deformation Characteristics of Geomaterials Comportement Des Sols Et Des Roches Tendres written by H. Di Benedetto and published by CRC Press. This book was released on 2003-01-01 with total page 1460 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main themes of this conference are experimental investigations into deformation properties - from very small strains to beyond failure, laboratory, in-situ and field observation interpretations, and behaviour characterization and modelling. Emphasis is placed on exploring recent investigations into time-related stresses, and on applying advanced geotechnical testing to real engineering problems.

Download or read book IUTAM Symposium on Micromechanics of Plasticity and Damage of Multiphase Materials written by André Pineau and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: The IUT AM Symposium on "Micromechanics of Plasticity and Damage of Multiphase Materials" was held in Sevres, Paris, France, 29 August - 1 September 1995. The Symposium was attended by 83 persons from 18 countries. In addition 17 young French students attended the meeting. During the 4 day meeting, a total of 55 papers were presented, including 24 papers in the poster sessions. The meeting was divided into 7 oral and 3 poster sessions. The 7 oral sessions were the following: - Plasticity and Viscoplasticity I and II; - Phase transformations; - Damage I and II; - Statistical and geometrical aspects; - Cracks and interfaces. Each poster session was introduced by a Rapporteur, as follows: - Session I (Plasticity and Viscoplasticity): G. Cailletaud; - Session 2 (Damage): D. Franc;:ois; - Session 3 (Phase transformation; statistical and geometrical aspects): D. Jeulin. The main purpose of the Symposium was the discussion of the state of the art in the development of micromechanical models used to predict the macroscopic mechanical behaviour of mUltiphase solid materials. These materials consist of at least two chemically different phases, present either initially or formed during plastic deformation, when a strain-induced phase transformation takes place. One session was devoted to the latter case. Continuously strengthened composite materials, containing long fibers, were out of the scope of the Symposium.

Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1995 with total page 988 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Plastic Mechanics of Geomaterial written by Yuanxue Liu and published by Springer. This book was released on 2019-01-07 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the basic theories of Plastic Mechanics of Geomaterial, including the static and dynamic mechanical properties, nonlinear and classical plastic theory, yield surface theory, hardening model, flow rule and loading–unloading criterion, the calculation theory of principal stress axe rotation, and limit analysis of geomaterial and the latest advances in FEM limit analysis. It also set forth the typical static and dynamic constitutive model of geomaterial in detail. Broadening our understanding of the basic mechanical properties and constitutive model for geomaterial, the book helps readers to establish and select the most appropriate constitutive model according to the specific engineering problems and geomaterial characteristics. This book is a valuable resource for designers and researchers in fields related to geotechnical engineering, and it can also be used as a textbook for graduate courses.

Download or read book Hydro Mechanical Coupling and Creep Behaviours of Geomaterials written by Yanlin Zhao and published by Frontiers Media SA. This book was released on 2021-03-03 with total page 323 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Stochastic Analysis of Offshore Steel Structures written by Halil Karadeniz and published by Springer Science & Business Media. This book was released on 2012-08-01 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: Stochastic Analysis of Offshore Steel Structures provides a clear and detailed guide to advanced analysis methods of fixed offshore steel structures using 3D beam finite elements under random wave and earthquake loadings. Advanced and up-to-date research results are coupled with modern analysis methods and essential theoretical information to consider optimal solutions to structural issues. As these methods require and use knowledge of different subject matters, a general introduction to the key areas is provided. This is followed by in-depth explanations supported by design examples, relevant calculations and supplementary material containing related computer programmers. By combining this theoretical and practical approach Stochastic Analysis of Offshore Steel Structures cover a range of key concepts in detail including: The basic principles of standard 3D beam finite elements and special connections, Wave loading - from hydrodynamics to the calculation of wave loading on structural members, Stochastic response calculations with corresponding solution algorithms including earthquakes, and Fatigue damage, reliability calculation and reliability based design optimization. The broad and detailed coverage makes this a solid reference for research oriented studies and practical sophisticated design methods. Students, researchers, insuring bodies and practical designer offices can turn to Stochastic Analysis of Offshore Steel Structures to broaden their theoretical understanding and develop their practical designs and applications of 3D finite analysis in fixed offshore steel structures.

Download or read book IUTAM IACM IABEM Symposium on Advanced Mathematical and Computational Mechanics Aspects of the Boundary Element Method written by Tadeusz Burczynski and published by Springer Science & Business Media. This book was released on 2001-08-31 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: held in Cracow, Poland, 31 May-3 June 1999

Download or read book Impacts in Mechanical Systems written by Bernard Brogliato and published by Springer. This book was released on 2008-01-11 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume constitutes an advanced introduction to the field of analysis, modeling and numerical simulation of rigid body mechanical systems with unilateral constraints. The topics include Moreau's sweeping process, the numerical analysis of nonsmooth multibody systems with friction, the study of energetical restitution coefficients for elasto-plastic models, the study of stability and bifurcation in systems with impacts, and the development of a multiple impact rule for Newton's cradle and the simple rocking model. Combining pedagogical aspects with innovative approaches, this book will not only be of interest to researchers working actively in the field, but also to graduate students wishing to get acquainted with this field of research through lectures written at a level also accessible to nonspecialists.

Download or read book Fundamentals of Discrete Element Methods for Rock Engineering Theory and Applications written by Lanru Jing and published by Elsevier. This book was released on 2007-07-18 with total page 563 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents some fundamental concepts behind the basic theories and tools of discrete element methods (DEM), its historical development, and its wide scope of applications in geology, geophysics and rock engineering. Unlike almost all books available on the general subject of DEM, this book includes coverage of both explicit and implicit DEM approaches, namely the Distinct Element Methods and Discontinuous Deformation Analysis (DDA) for both rigid and deformable blocks and particle systems, and also the Discrete Fracture Network (DFN) approach for fluid flow and solute transport simulations. The latter is actually also a discrete approach of importance for rock mechanics and rock engineering. In addition, brief introductions to some alternative approaches are also provided, such as percolation theory and Cosserat micromechanics equivalence to particle systems, which often appear hand-in-hand with the DEM in the literature. Fundamentals of the particle mechanics approach using DEM for granular media is also presented. · Presents the fundamental concepts of the discrete models for fractured rocks, including constitutive models of rock fractures and rock masses for stress, deformation and fluid flow · Provides a comprehensive presentation on discrete element methods, including distinct elements, discontinuous deformation analysis, discrete fracture networks, particle mechanics and Cosserat representation of granular media · Features constitutive models of rock fractures and fracture system characterization methods detaiing their significant impacts on the performance and uncertainty of the DEM models

Download or read book Materials Processing Defects written by M. Predeleanu and published by Elsevier. This book was released on 1995-02-24 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: The technological field of defects, and more appropriately, avoidance of them, is very current in perhaps all sectors of the manufacturing industry. This is particularly important to reduce/minimize waste everywhere to address lean production procedures. The recent advances in finite plasticity and visioplasticity, damage modelling, instability theories, fracture modelling, computer numerical techniques and process simulation etc. offer new approaches and tools for defect prediction, analyses and guidelines for designing components to be manufactured by traditional and emerging process technologies. This volume contains contributions from well known researchers and experts in the field presenting an up-to-date overview of advances in this area. Subjects covered include: micro- and macro-scale observation of defects; localization and instability analysis; damage modelling and fracture criteria; defect prediction methods; design considerations to avoid defects.

Download or read book Damage Mechanics in Engineering Materials written by Jiann-Wen Woody Ju and published by Elsevier. This book was released on 1998-03-04 with total page 545 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains thirty peer-reviewed papers that are based on the presentations made at the symposium on "Damage Mechanics in Engineering Materials" on the occasion of the Joint ASME/ASCE/SES Mechanics Conference (McNU97), held in Evanston, Illinois, June 28-July 2, 1997. The key area of discussion was on the constitutive modeling of damage mechanics in engineering materials encompassing the following topics: macromechanics/micromechanical constitutive modeling, experimental procedures, numerical modeling, inelastic behavior, interfaces, damage, fracture, failure, computational methods. The book is divided into six parts: Study of damage mechanics. Localization and damage. Damage in brittle materials. Damage in metals and metal matrix composites. Computational aspects of damage models. Damage in polymers and elastomers.

Download or read book Advances in Adaptive Computational Methods in Mechanics written by P. Ladeveze and published by Elsevier. This book was released on 1998-06-23 with total page 539 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mastering modelling, and in particular numerical models, is becoming a crucial and central question in modern computational mechanics. Various tools, able to quantify the quality of a model with regard to another one taken as the reference, have been derived. Applied to computational strategies, these tools lead to new computational methods which are called "adaptive". The present book is concerned with outlining the state of the art and the latest advances in both these important areas. Papers are selected from a Workshop (Cachan 17-19 September 1997) which is the third of a series devoted to Error Estimators and Adaptivity in Computational Mechanics. The Cachan Workshop dealt with latest advances in adaptive computational methods in mechanics and their impacts on solving engineering problems. It was centered too on providing answers to simple questions such as: what is being used or can be used at present to solve engineering problems? What should be the state of art in the year 2000? What are the new questions involving error estimators and their applications?

Download or read book Rock Mechanics and Engineering Volume 1 written by Xia-Ting Feng and published by CRC Press. This book was released on 2017-03-16 with total page 772 pages. Available in PDF, EPUB and Kindle. Book excerpt: Principles is the first volume of the five-volume set Rock Mechanics and Engineering and contains twenty-four chapters from key experts in the following fields: - Discontinuities; - Anisotropy; - Rock Stress; - Geophysics; - Strength Criteria; - Modeling Rock Deformation and Failure. The five-volume set “Comprehensive Rock Engineering”, which was published in 1993, has had an important influence on the development of rock mechanics and rock engineering. Significant and extensive advances and achievements in these fields over the last 20 years now justify the publishing of a comparable, new compilation. Rock Mechanics and Engineering represents a highly prestigious, multi-volume work edited by Professor Xia-Ting Feng, with the editorial advice of Professor John A. Hudson. This new compilation offers an extremely wideranging and comprehensive overview of the state-of-the-art in rock mechanics and rock engineering and is composed of peer-reviewed, dedicated contributions by all the key experts worldwide. Key features of this set are that it provides a systematic, global summary of new developments in rock mechanics and rock engineering practices as well as looking ahead to future developments in the fields. Contributors are worldrenowned experts in the fields of rock mechanics and rock engineering, though younger, talented researchers have also been included. The individual volumes cover an extremely wide array of topics grouped under five overarching themes: Principles (Vol. 1), Laboratory and Field Testing (Vol. 2), Analysis, Modelling and Design (Vol. 3), Excavation, Support and Monitoring (Vol. 4) and Surface and Underground Projects (Vol. 5). This multi-volume work sets a new standard for rock mechanics and engineering compendia and will be the go-to resource for all engineering professionals and academics involved in rock mechanics and engineering for years to come.

Download or read book Thermo Poroelasticity and Geomechanics written by A. P. S. Selvadurai and published by Cambridge University Press. This book was released on 2016-10-27 with total page 269 pages. Available in PDF, EPUB and Kindle. Book excerpt: A full account of thermo-poroelasticity and thermo-poromechanics with derivations to problems, for both experienced and novice researchers.

Download or read book Rock Mass Stability Around Underground Excavations in a Mine written by Yan Xing and published by CRC Press. This book was released on 2019-11-20 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: Stability of underground excavations is of great importance to an operating mine because it ensures the safety of the working people and operating equipment, and successful ore production. Due to the complex geological conditions and mine constructions, and variability and uncertainty in estimating rock mass mechanical properties, the assessment of rock mass stability for an underground mine is extremely challenging and difficult. Tackling of this difficult problem is not covered in detail in any of the textbooks currently available in the rock mechanics literature. This monograph aims to cover this gap in the rock mechanics and rock engineering field. This monograph provides detailed procedures for the stability assessment and support design for an underground mine case study. It covers the background of the mine site including the monitored deformation data, the state-of-art methodologies for the stability analysis of rock masses around underground excavations, performed laboratory tests, estimation of the rock mass properties, a brief theory and background of the 3-D Distinct Element Code (3DEC), and numerical modeling of underground rock mass stability including investigation of the effectiveness of rock supports. The monograph is an excellent reference for the senior undergraduates, graduate students, researchers and practitioners who work in the Underground Rock Mechanics and Rock Engineering area in the Mining Engineering, Civil Geotechnical Engineering and DEM (Distinct Element Method) Numerical modeling.