Download or read book Mechanics of Finite Deformation and Fracture written by Majid Aleyaasin and published by CRC Press. This book was released on 2016-01-05 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: This important work covers the fundamentals of finite deformation in solids and constitutive relations for different types of stresses in large deformation of solids. In addition, the book covers the fracture phenomena in brittle or quasi-brittle materials in which large deformation does not occur. The book provides a thorough understanding of frac

Download or read book Fracture Mechanics written by Dominique P. Miannay and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: Intended for engineers from a variety of disciplines dealing with structural materials, this text describes the current state of knowledge. It begins by describing the fracture process at the two extremes of scale: first in the context of atomic structures, then in terms of a continuous elastic medium. Treating the fracture process in increasingly sophisticated ways, the book then considers plastic corrections and the procedures for measuring the toughness of materials. Practical considerations are then discussed, including crack propagation, geometry dependence, flaw density, mechanisms of failure by cleavage, the ductile-brittle transition, and continuum damage mechanics. The whole is rounded off with discussions of generalised plasticity and the link between the microscopic and macroscopic aspects, and problems are provided at the end of each chapter.

Download or read book Deformation and Failure in Metallic Materials written by Kolumban Hutter and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 413 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is devoted to the deformation and failure in metallic materials, summarizing the results of a research programme financed by the "Deutsche Forschungsgemeinschaft". It presents the recent engineering as well as mathematical key aspects of this field for a broad community. Its main focus is on the constitutive behaviour as well as the damage and fracture of metallic materials, covering their mathematical foundation, modelling and numerics, but also relevant experiments and their verification.

Download or read book Extended Finite Element Method written by Amir R. Khoei and published by John Wiley & Sons. This book was released on 2015-02-23 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduces the theory and applications of the extended finite element method (XFEM) in the linear and nonlinear problems of continua, structures and geomechanics Explores the concept of partition of unity, various enrichment functions, and fundamentals of XFEM formulation. Covers numerous applications of XFEM including fracture mechanics, large deformation, plasticity, multiphase flow, hydraulic fracturing and contact problems Accompanied by a website hosting source code and examples

Download or read book Applied Mechanics of Solids written by Allan F. Bower and published by CRC Press. This book was released on 2009-10-05 with total page 820 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern computer simulations make stress analysis easy. As they continue to replace classical mathematical methods of analysis, these software programs require users to have a solid understanding of the fundamental principles on which they are based.Develop Intuitive Ability to Identify and Avoid Physically Meaningless PredictionsApplied Mechanics o

Download or read book Deformation and Fracture in Materials written by Anoop Kumar Mukhopadhyay and published by CRC Press. This book was released on 2024-08-27 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides information on the basics of deformation and fracture in materials and on current, state-of-the-art experimental and numerical/theoretical methods, including data-driven approaches in the deformation and fracture study of materials. The blend of experimental test methods and numerical techniques to study deformation and fracture in materials is discussed. In addition, the application of data-driven approaches in predicting material performance in different types of loading and loading environments is illustrated. Features: Includes clear insights on deformation and fracture in materials, with clear explanations of mechanics and defects relating to them Provides effective treatments of modern numerical simulation methods Explores applications of data-driven approaches such as artificial intelligence, machine learning, and computer vision Reviews simple and basic experimental techniques to understand the concepts of deformation and fracture in materials Details modeling and simulation strategies of mechanics of materials at different scales This book is aimed at researchers and graduate students in fracture mechanics, finite element methods, and materials science.

Download or read book Multiscale Deformation and Fracture in Materials and Structures written by T-J. Chuang and published by Springer Science & Business Media. This book was released on 2006-04-11 with total page 451 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern Solid Mechanics considers phenomena at many levels, ranging from nano size at atomic scale through the continuum level at millimeter size to large structures at the tens of meter scale. The deformation and fracture behavior at these various scales are inextricably related to interdisciplinary methods derived from applied mathematics, physics, chemistry, and engineering mechanics. This book, in honor of James R. Rice, contains articles from his colleagues and former students that bring these sophisticated methods to bear on a wide range of problems. Articles discussing problems of deformation include topics of dislocation mechanics, second particle effects, plastic yield criterion on porous materials, hydrogen embrittlement, solid state sintering, nanophases at surfaces, adhesion and contact mechanics, diffuse instability in geomaterials, and percolation in metal deformation. In the fracture area, the topics include: elastic-plastic crack growth, dynamic fracture, stress intensity and J-integral analysis, stress-corrosion cracking, and fracture in single crystal, piezoelectric, composite and cementitious materials. The book will be a valuable resource for researchers in modern solid mechanics and can be used as reference or supplementary text in mechanical and civil engineering, applied mechanics, materials science, and engineering graduate courses on fracture mechanics, elasticity, plasticity, mechanics of materials or the application of solid mechanics to processing, and reliability of life predictions.

Download or read book Fracture Mechanics written by National Symposium on Fracture Mechanics and published by ASTM International. This book was released on 1980 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Stability of Structures written by Z. P. Ba?ant and published by World Scientific. This book was released on 2010 with total page 1039 pages. Available in PDF, EPUB and Kindle. Book excerpt: A crucial element of structural and continuum mechanics, stability theory has limitless applications in civil, mechanical, aerospace, naval and nuclear engineering. This text of unparalleled scope presents a comprehensive exposition of the principles and applications of stability analysis. It has been proven as a text for introductory courses and various advanced courses for graduate students. It is also prized as an exhaustive reference for engineers and researchers. The authors' focus on understanding of the basic principles rather than excessive detailed solutions, and their treatment of each subject proceed from simple examples to general concepts and rigorous formulations. All the results are derived using as simple mathematics as possible. Numerous examples are given and 700 exercise problems help in attaining a firm grasp of this central aspect of solid mechanics. The book is an unabridged republication of the 1991 edition by Oxford University Press and the 2003 edition by Dover, updated with 18 pages of end notes.

Download or read book Fracture Mechanics written by Alan T. Zehnder and published by Springer Science & Business Media. This book was released on 2012-01-03 with total page 235 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fracture mechanics is a vast and growing field. This book develops the basic elements needed for both fracture research and engineering practice. The emphasis is on continuum mechanics models for energy flows and crack-tip stress- and deformation fields in elastic and elastic-plastic materials. In addition to a brief discussion of computational fracture methods, the text includes practical sections on fracture criteria, fracture toughness testing, and methods for measuring stress intensity factors and energy release rates. Class-tested at Cornell, this book is designed for students, researchers and practitioners interested in understanding and contributing to a diverse and vital field of knowledge.

Download or read book Fracture Mechanics written by Vladimir Zalmanovich Parton and published by CRC Press. This book was released on 1992 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: An introduction to the mechanics and mathematics of fracture for undergraduates in a wide range of fields, practical engineers, and other inquisitive readers with a background in at least the fundamentals of mechanics and mathematics. Describes the historical development of the fracture-mechanical concepts used today, and how these are applied in industry. Translated from the Russian; about half of the brief bibliography are works in Russian. Annotation copyrighted by Book News, Inc., Portland, OR

Download or read book Introduction To Practical Peridynamics Computational Solid Mechanics Without Stress And Strain written by Walter Herbert Gerstle and published by World Scientific Publishing Company. This book was released on 2015-07-23 with total page 427 pages. Available in PDF, EPUB and Kindle. Book excerpt: Parting with the classical continuum concepts of stress and strain in the computational simulation of solids, this book proposes a peridynamic model that applies the model directly to particle lattices. The model is directly solvable on a computer.Introduction to Practical Peridynamics is both a graduate-level textbook and a treatise. The text provides the necessary foundations to understand and apply the state-based peridynamic lattice model, as well as a guide for the practical use of the model — for solving realistic structural engineering problems (particularly in reinforced concrete structures) in elasticity, plasticity, damage, fracture, and large deformations.Contents in this book include introductory chapters presenting the historical background of the subject; classical elasticity; computational solid modeling; continuum mechanics; fracture mechanics; particle dynamics simulations on parallel computers; as well as example simulations (with model applications).

Download or read book Finite Elements in Fracture Mechanics written by Meinhard Kuna and published by Springer Science & Business Media. This book was released on 2013-07-19 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fracture mechanics has established itself as an important discipline of growing interest to those working to assess the safety, reliability and service life of engineering structures and materials. In order to calculate the loading situation at cracks and defects, nowadays numerical techniques like finite element method (FEM) have become indispensable tools for a broad range of applications. The present monograph provides an introduction to the essential concepts of fracture mechanics, its main goal being to procure the special techniques for FEM analysis of crack problems, which have to date only been mastered by experts. All kinds of static, dynamic and fatigue fracture problems are treated in two- and three-dimensional elastic and plastic structural components. The usage of the various solution techniques is demonstrated by means of sample problems selected from practical engineering case studies. The primary target group includes graduate students, researchers in academia and engineers in practice.

Download or read book Theoretical and Applied Mechanics written by P. Germain and published by Elsevier. This book was released on 2012-12-02 with total page 495 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contained in this volume are the full texts of the invited general and sectional lectures presented at this conference. The entire field of mechanics is covered, including analytical, solid and fluid mechanics and their applications. Invited papers on the following topics are also presented: Mechanics of large deformation and damage; The dynamics of two-phase flows; Mechanics of the earth's crust. The papers are written by leading experts and provide a valuable key to the latest and most important developments in various sub-fields of mechanics.

Download or read book Fracture Mechanics written by Surjya Kumar Maiti and published by Cambridge University Press. This book was released on 2015-10-01 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fracture mechanics studies the development and spreading of cracks in materials. The study uses two techniques including analytical and experimental solid mechanics. The former is used to determine the driving force on a crack and the latter is used to measure material's resistance to fracture. The text begins with a detailed discussion of fundamental concepts including linear elastic fracture mechanics (LEFM), yielding fracture mechanics, mixed mode fracture and computational aspects of linear elastic fracture mechanics. It explains important topics including Griffith theory of brittle crack propagation and its Irwin and Orowan modification, calculation of theoretical cohesive strength of materials through an atomic model and analytical determination of crack tip stress field. This book covers MATLAB programs for calculating fatigue life under variable amplitude cyclic loading. The experimental measurements of fracture toughness parameters KIC, JIC and crack opening displacement (COD) are provided in the last chapter.

Download or read book Contact and Fracture Mechanics written by Pranav H. Darji and published by BoD – Books on Demand. This book was released on 2018-05-30 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains two sections: Chapters 1-7 deal with contact mechanics, and Chapters 8-13 deal with fracture mechanics. The different contributions of this book will cover the various advanced topics of research. It provides some needed background with respect to contact mechanics, fracture mechanics and the use of finite element methods in both. All the covered chapters of this book are of a theoretical and applied nature, suitable for the researchers of engineering, physics, applied mathematics and mechanics with an interest in computer simulation of contact and fracture problems.

Download or read book Fracture Mechanics of Metals Composites Welds and Bolted Joints written by Bahram Farahmand and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 425 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the preliminary stage of designing new structural hardware to perform a given mission in a fluctuating load environment, there are several factors that the designer should consider. Trade studies for different design configurations should be performed and, based on strength and weight considerations, among others, an optimum configuration selected. The selected design must withstand the environment in question without failure. Therefore, a comprehensive structural analysis that consists of static, dynamic, fatigue, and fracture is necessary to ensure the integrity of the structure. Engineers must also consider the feasibility of fabricating the structural hardware in the material selection process. During the past few decades, fracture mechanics has become a necessary discipline for the solution of many structural problems in which the survivability of structure containing pre-existing flaws is of great interest. These problems include structural failures resulting from cracks that are inherent in the material, or defects that are introduced in the part due to improper handling or rough machining, that must be assessed through fracture mechanics concepts.